Need Performance Help in Portland, ME

I need WLS6.1 expertise for a few days in Portland, ME to analyze the results of
load testing (Solaris environment).
Anyone out there?

Way back when, years and years ago, when S60 3rd Edition was new, I recall there was a problem where if the phone kept sending SMS messages, the phone gradually became slower and slower, until it became unusable.
This was a Messaging bug in S60/Symbian.
A fix was released as an installable "SMS Accelerator" (or some such deceptive name, if my memory serves me right) .sis/.sisx file that corrected the bug.
The fix was also introduced in firmware updates for all affected phone models.
On some operator customized versions, the installable fix may be the only option, if the operator decided that it is not worth to test and release a firmware upgrade for their version.
I don't recall if the N73 was affected.

Similar Messages

  • Need your help on performance issue please

    Hello everyone!
    I need your help to understand an effect I notice with a Thread class I built. I currently work on enhancement of my application Playlist Editor (see http://www.lightdev.com/page74.htm) and a new release will be available soon.
    Among other extensions the new release will have a title filter function which is based on audio data that is recursively read from ID3 tags of files found in a given root directory. The data collection is done by a CollectionThread class which reads into a data model class AudioDataModel and the entire process works fine, no problem with that.
    However, when my application is started for the first time the CollectionThread runs approximately 3 minutes to collect data from approximately 4300 audio files on an Intel Pentium M 1,4 GHz, 512 MB RAM, Windows XP SP2. When the application is shut down and started again, it takes only a few seconds to do the same task for all subsequent launches.
    I already tried to start the application with java option -Xms40m to increase initial heap size. This increases performance in general but the effect is still the same, i.e. first run lasts significantly longer than subsequent runs.
    I also tried to build a pool mechanism which creates many empty objects in the data model and then releases them to contain the actual data at is being read in but this did not lead to better performance.
    It must have to do with how Java (or Windows?) allocates and caches memory. I wonder whether there is a way to pre-allocate memory or if there are any other ideas to improve performance so that the process always only takes seconds instead of minutes?
    I attach the key classes to this message. Any help or ideas is much appreciated!
    Thanks a lot a best regards
    Ulrich
    PS: You can use the news subscription service at
    http://www.lightdev.com/dynTemplate.php4?id=80&dynPage=subscribe.php4 to be informed when the new release of Playlist Editor is available.
    All classes posted here do not need debugging, they already have proven to run error free. The classes are only posted for information for the interested reader - no need to go through all the stuff in detail - only if it interests you.
    My application calls class CollectionThread wich is a subclass of InfoThread. CollectionThread recursively goes through a directory and file structure and stores found ID3 tag information in instances of class ID3v11Tag which in turn gets stored in one instance of class AudioDataModel. All classes are shown below.
    This is the mentioned CollectionThread
    * Light Development Playlist Editor
    * Copyright (C) 2004 Ulrich Hilger
    * This program is free software; you can redistribute it and/or
    * modify it under the terms of the GNU General Public License
    * as published by the Free Software Foundation; either version 2
    * of the License, or (at your option) any later version.
    * This program is distributed in the hope that it will be useful,
    * but WITHOUT ANY WARRANTY; without even the implied warranty of
    * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    * GNU General Public License for more details.
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    package com.lightdev.app.playlisteditor.data;
    import com.lightdev.lib.util.InfoThread;
    import java.io.File;
    * A class to collect audio data from a given storage location.
    * <p>
    * <code>CollectionThread</code> uses ID3 tag information to gain data.
    * </p>
    * <p>See <a href="http://www.id3.org">http://www.id3.org</a> for details about
    * ID3 tags.</p>
    * @author Ulrich Hilger
    * @author Light Development
    * @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
    * @author <a href="mailto:[email protected]">[email protected]</a>
    * @author published under the terms and conditions of the
    *      GNU General Public License,
    *      for details see file gpl.txt in the distribution
    *      package of this software as well as any licensing notes
    *      inside this documentation
    * @version 1, October 13, 2004
    public class CollectionThread extends InfoThread {
       * constructor
       * @param model  AudioDataModel  the data model to collect data to
      public CollectionThread(AudioDataModel model) {
        this.model = model;
       * constructor, creates a new empty AudioDataModel
      public CollectionThread() {
        this(new AudioDataModel());
       * set the data model to collect data to
       * @param model AudioDataModel  the model to collect data to
      public void setModel(AudioDataModel model) {
        this.model = model;
       * get the data model associated to this thread
       * @return AudioDataModel  the data model
      public AudioDataModel getModel() {
        return model;
       * set the directory to collect data from
       * @param rootDir File  the directory to collect data from
      public void setRootDirectory(File rootDir) {
        this.rootDir = rootDir;
       * do te actual work of this thread, i.e. iterate through a given directory
       * structure and collect audio data
       * @return boolean  true, if work is left
      protected boolean work() {
        boolean workIsLeft = true;
        maxValue = -1;
        filesProcessed = 0;
        if(getStatus() < STATUS_HALT_PENDING) {
          countElements(rootDir.listFiles());
        if(getStatus() < STATUS_HALT_PENDING) {
          workIsLeft = collect(rootDir.listFiles());
        return workIsLeft;
       * count the elements in a given file array including its subdirectories
       * @param files File[]
      private void countElements(File[] files) {
        int i = 0;
        while (i < files.length && getStatus() < STATUS_HALT_PENDING) {
          File file = files;
    if (file.isDirectory()) {
    countElements(file.listFiles());
    i++;
    maxValue++;
    * recursively read data into model
    * @param files File[] the file array representing the content of a given directory
    private boolean collect(File[] files) {
    int i = 0;
    while(i < files.length && getStatus() < STATUS_HALT_PENDING) {
    File file = files[i];
    if(file.isDirectory()) {
    collect(file.listFiles());
    else if(file.getName().toLowerCase().endsWith("mp3")) {
    try {
    model.addTrack(file);
    catch(Exception e) {
    fireThreadException(e);
    i++;
    filesProcessed++;
    fireThreadProgress(filesProcessed);
    return (i<files.length);
    /** the directory to collect data from */
    private File rootDir;
    /** the data model to collect data to */
    private AudioDataModel model;
    /** the number of files this thread processed so far while it is running */
    private long filesProcessed = 0;
    This is class InfoThread
    * Light Development Java Library
    * Copyright (C) 2003, 2004 Ulrich Hilger
    * This program is free software; you can redistribute it and/or
    * modify it under the terms of the GNU General Public License
    * as published by the Free Software Foundation; either version 2
    * of the License, or (at your option) any later version.
    * This program is distributed in the hope that it will be useful,
    * but WITHOUT ANY WARRANTY; without even the implied warranty of
    * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    * GNU General Public License for more details.
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    package com.lightdev.lib.util;
    import java.util.Vector;
    import java.util.Enumeration;
    * Abstract class <code>InfoThread</class> implements a status and listener concept.
    * An <code>InfoThread</code> object actively informs all objects registered as listeners about
    * status changes, progress and possible exceptions. This way the status of a running
    * thread does not require a polling mechanism to be monitored.
    * <p>
    * <code>InfoThread</code> implements the following working scheme
    * </p>
    * @author Ulrich Hilger
    * @author Light Development
    * @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
    * @author <a href="mailto:[email protected]">[email protected]</a>
    * @author published under the terms and conditions of the
    *      GNU General Public License,
    *      for details see file gpl.txt in the distribution
    *      package of this software
    * @version Version 1, October 13, 2004
    public abstract class InfoThread extends Thread {
       * construct an <code>InfoThread</code> object
       * <p>This class is meant to be used when a <code>Thread</code> object is needed that actively
       * informs other objects about its status</code>. It is a good idea therefore to register
       * one or more listeners with instances of this class before doing anything
       * else.</p>
       * @see addInfoThreadListener
      public InfoThread() {
       * set the amount of time this thread shall idle after it is through with one
       * work cycle and before a next work cycle is started. This influences the time
       * other threads have for their work.
       * @param millis long  the number of milliseconds to idle after one work cycle
      public void setIdleMillis(long millis) {
        idleMillis = millis;
       * Causes this thread to begin execution; the Java Virtual Machine calls the <code>run</code>
       * method of this thread. Calls method <code>prepareThread</code> before calling
       * <code>run</code>.
       * @see run
       * @see prepareThread
      public synchronized void start() {
        setStatus(STATUS_INITIALIZING);
        prepareThread();
        setStatus(STATUS_READY);
        super.start();
       * call method <code>start</code> instead of this method.
       * calling this method directly will lead to an exception
       * @see start
      public void run() {
        //System.out.println("InfoThread.run");
        if (status == STATUS_READY) {
          boolean workIsLeft = true;
          setStatus(STATUS_RUNNING);
          while (status < STATUS_STOP_PENDING && workIsLeft) {
            if (status < STATUS_HALT_PENDING) {
              workIsLeft = work();
              if(!workIsLeft) {
                setStatus(STATUS_WORK_COMPLETE);
            if (status == STATUS_HALT_PENDING) {
              setStatus(STATUS_HALTED);
            else if (status == STATUS_STOP_PENDING) {
              setStatus(STATUS_STOPPED);
            else {
              try {
                sleep(idleMillis);
              catch (InterruptedException e) {
                fireThreadException(e);
        else {
          // error: Thread is not ready to run
        setStatus(STATUS_THREAD_FINISHED);
       * stop this thread. This will terminate the thread irrevokably. Use method
       * <code>haltThread</code> to pause a thread with the possiblity to resume work later.
       * @see haltThread
      public void stopThread() {
        switch (status) {
          case STATUS_RUNNING:
            setStatus(STATUS_STOP_PENDING);
            break;
          case STATUS_HALT_PENDING:
            // exception: the thread already is about to halt
            break;
          case STATUS_STOP_PENDING:
            // exception: the thread already is about to stop
            break;
          default:
            // exception: a thread can not be stopped, when it is not running
            break;
       * halt this thread, i.e. pause working allowing to resume later
       * @see resumeThread
      public void haltThread() {
        switch (status) {
          case STATUS_RUNNING:
            setStatus(STATUS_STOP_PENDING);
            break;
          case STATUS_HALT_PENDING:
            // exception: the thread already is about to halt
            break;
          case STATUS_STOP_PENDING:
            // exception: the thread already is about to stop
            break;
          default:
            // exception: a thread can not be halted, when it is not running
            break;
       * resume this thread, i.e. resume previously halted work
       * @see haltThread
      public void resumeThread() {
        if(status == STATUS_HALTED || status == STATUS_HALT_PENDING) {
          setStatus(STATUS_RUNNING);
        else {
          // exception: only halted threads or threads that are about to halt can be resumed
       * this is the method to prepare a thread to run. It is not implemented in this abstract
       * class. Subclasses of <code>InfoThread</code> can implement this method to do anything
       * that might be required to put their thread into STATUS_READY. This method is called
       * automatically by method <code>start</code>.  When implementing this method, it should
       * call method <code>fireThreadException</code> accordingly.
       * @see start
       * @see fireThreadException
      protected void prepareThread() {
        // does nothing in this abstract class but might be needed in subclasses
       * this is the main activity method of this object. It is not implemented in this abstract
       * class. Subclasses of <code>InfoThread</code> must implement this method to do something
       * meaningful. When implementing this method, it should call methods
       * <code>fireThreadProgress</code> and <code>fireThreadException</code> accordingly.
       * @return boolean true, if work is left, false if not
       * @see fireThreadProgress
       * @see fireTreadException
      protected abstract boolean work();
       * add an <code>InfoTreadListener</code> to this instance of <code>InfoThread</code>
       * @param l InfoThreadListener  the listener to add
       * @see removeInfoThreadListener
      public void addInfoThreadListener(InfoThreadListener l) {
        listeners.add(l);
       * remove an <code>InfoTreadListener</code> from this instance of <code>InfoThread</code>
       * @param l InfoThreadListener  the listener to remove
      public void removeInfoThreadListener(InfoThreadListener l) {
        listeners.remove(l);
       * notify all <code>InfoThreadListener</code>s of a status change
       * @param fromStatus int  the status tis thread had before the change
       * @param toStatus int  the status this thread has now
      protected void fireThreadStatusChanged(int fromStatus, int toStatus) {
        Enumeration e = listeners.elements();
        while(e.hasMoreElements()) {
          Object l = e.nextElement();
          if(l instanceof InfoThreadListener) {
            ((InfoThreadListener) l).threadStatusChanged(this, fromStatus, toStatus);
       * notify all <code>InfoThreadListener</code>s of an exception in this thread
       * @param ex Exception  the exception that occurred
      protected void fireThreadException(Exception ex) {
        Enumeration e = listeners.elements();
        while(e.hasMoreElements()) {
          Object l = e.nextElement();
          if(l instanceof InfoThreadListener) {
            ((InfoThreadListener) l).threadException(this, ex);
       * notify all <code>InfoThreadListener</code>s of the progress of this thread
       * @param progressValue long  a value indicating the current thread progress
      protected void fireThreadProgress(long progressValue) {
        Enumeration e = listeners.elements();
        while(e.hasMoreElements()) {
          Object l = e.nextElement();
          if(l instanceof InfoThreadListener) {
            ((InfoThreadListener) l).threadProgress(this, progressValue, maxValue);
       * set the status of this thread and notify all listeners
       * @param newStatus int  the status this thread is to be changed to
      private void setStatus(int newStatus) {
        //System.out.println("InfoThread.setStatus oldStatus=" + status + ", newStatus=" + newStatus);
        int fromStatus = status;
        status = newStatus;
        fireThreadStatusChanged(fromStatus, newStatus);
       * get the current status of this thread
       * @return int  the status
      public int getStatus() {
        return status;
       * cleanup before actual destruction.
      public void destroy() {
        //System.out.println("InfoThread.destroy");
        cleanup();
        super.destroy();
       * cleanup all references this thread maintains
      private void cleanup() {
        //System.out.println("InfoThread.cleanup");
        listeners.removeAllElements();
        listeners = null;
      /* ----------------------- class fields start ------------------------ */
      /** storage for the objects this thread notifies about status changes and progress */
      private Vector listeners = new Vector();
      /** indicator for the status of this thread */
      private int status = STATUS_NONE;
      /** maximum value for threadProgress */
      protected long maxValue = -1;
      /** the idle time inside one work cycle in milliseconds */
      protected long idleMillis = 1;
      /* ----------------------- class fields end -------------------------- */
      /* ----------------------- constants start --------------------------- */
      /** constant value indicating that no status has been set so far */
      public static final int STATUS_NONE = 0;
      /** constant value indicating that the thread is currently initializing */
      public static final int STATUS_INITIALIZING = 1;
      /** constant value indicating that the thread is ready to run */
      public static final int STATUS_READY = 2;
      /** constant value indicating that the thread is running */
      public static final int STATUS_RUNNING = 3;
      /** constant value indicating that the thread is about to halt */
      public static final int STATUS_HALT_PENDING = 4;
      /** constant value indicating that the thread is halted */
      public static final int STATUS_HALTED = 5;
      /** constant value indicating that the work of this thread is complete */
      public static final int STATUS_WORK_COMPLETE = 6;
      /** constant value indicating that the thread is about to stop */
      public static final int STATUS_STOP_PENDING = 7;
      /** constant value indicating that the thread is stopped */
      public static final int STATUS_STOPPED = 8;
      /** constant value indicating that the thread is finished */
      public static final int STATUS_THREAD_FINISHED = 9;
      /* ----------------------- constants end --------------------------- */
    }this is the InfoThreadListener interface
    * Light Development Java Library
    * Copyright (C) 2003, 2004 Ulrich Hilger
    * This program is free software; you can redistribute it and/or
    * modify it under the terms of the GNU General Public License
    * as published by the Free Software Foundation; either version 2
    * of the License, or (at your option) any later version.
    * This program is distributed in the hope that it will be useful,
    * but WITHOUT ANY WARRANTY; without even the implied warranty of
    * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    * GNU General Public License for more details.
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    package com.lightdev.lib.util;
    * An interface classes interested to receive events from objects
    * of class <code>InfoThread</code> need to implement.
    * @author Ulrich Hilger
    * @author Light Development
    * @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
    * @author <a href="mailto:[email protected]">[email protected]</a>
    * @author published under the terms and conditions of the
    *      GNU General Public License,
    *      for details see file gpl.txt in the distribution
    *      package of this software
    * @version Version 1, October 13, 2004
    public interface InfoThreadListener {
       * method to receive a status change notification from a thread
       * @param thread InfoThread  the thread which status changed
       * @param fromStatus int  the status which the thread had before the change
       * @param toStatus int  the status which the thread has now
      public void threadStatusChanged(InfoThread thread, int fromStatus, int toStatus);
       * method to receive a notification about the progress of a thread
       * @param thread InfoThread  the thread which notified about its progress
       * @param progressValue long  the value (e.g. 10 if 100 percent completed, 20 of 1 million files processed, etc.)
      public void threadProgress(InfoThread thread, long progressValue, long maxValue);
       * method to receive a notifiaction about the fact that an exception occurred in a thread
       * @param thread InfoThread  the thread for which an exception occurred
       * @param e Exception  the exception that occurred
      public void threadException(InfoThread thread, Exception e);
    }This is class AudioFileDescriptor
    * Light Development Java Library
    * Copyright (C) 2004 Ulrich Hilger
    * This program is free software; you can redistribute it and/or
    * modify it under the terms of the GNU General Public License
    * as published by the Free Software Foundation; either version 2
    * of the License, or (at your option) any later version.
    * This program is distributed in the hope that it will be useful,
    * but WITHOUT ANY WARRANTY; without even the implied warranty of
    * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    * GNU General Public License for more details.
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    package com.lightdev.lib.audio;
    import java.io.FileNotFoundException;
    import java.io.IOException;
    import java.io.RandomAccessFile;
    import java.io.Serializable;
    import java.text.DecimalFormat;
    * This class models characteristics of an audio file such as the absolute path
    * of the file, its tag contents (if any) and the play duration, etc.
    * <p>See <a href="http://www.id3.org">http://www.id3.org</a> for details about
    * ID3 tags.</p>
    * @author Ulrich Hilger
    * @author Light Development
    * @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
    * @author <a href="mailto:[email protected]">[email protected]</a>
    * @author published under the terms and conditions of the
    *      GNU General Public License,
    *      for details see file gpl.txt in the distribution
    *      package of this software
    * @version Version 1, October 13, 2004
    public class AudioFileDescriptor implements Serializable, Comparable {
      public AudioFileDescriptor(String absolutePath) throws FileNotFoundException, IOException {
        load(absolutePath);
      public boolean equals(Object o) {
        if(o != null && o instanceof AudioFileDescriptor) {
          return ((AudioFileDescriptor) o).getAbsolutePath().equalsIgnoreCase(this.getAbsolutePath());
        else {
          return false;
      public void load(String absolutePath) throws FileNotFoundException, IOException {
        this.absolutePath = absolutePath;
        RandomAccessFile rf = new RandomAccessFile(absolutePath, "r");
        if(id3v11Tag == null) {
          id3v11Tag = new ID3v11Tag(rf, false);
        else {
          id3v11Tag.readTag(rf, rf.length() - 128);
        rf.close();
      public String getAbsolutePath() {
        return absolutePath;
      public ID3v11Tag getID3v11Tag() {
        return id3v11Tag;
      public void setID3v11Tag(ID3v11Tag tag) {
        this.id3v11Tag = tag;
      public String toString() {
        DecimalFormat df = new DecimalFormat("00");
        return id3v11Tag.getArtist() + ", " + id3v11Tag.getAlbum() + " - " +
            df.format(id3v11Tag.getTrackNumber()) + " " + id3v11Tag.getTitle();
       * Compares this object with the specified object for order.
       * @param o the Object to be compared.
       * @return a negative integer, zero, or a positive integer as this object is less than, equal to,
       *   or greater than the specified object.
       * @todo Implement this java.lang.Comparable method
      public int compareTo(Object o) {
        return toString().compareTo(o.toString());
      private String absolutePath;
      private ID3v11Tag id3v11Tag;
      private transient long duration = -1;
      private transient int type = TYPE_UNKNOWN;
      public static final transient int TYPE_UNKNOWN = 0;
      public static final transient int TYPE_MP3 = 1;
    }This is class ID3V11Tag into which the data is actually stored
    * Light Development Java Library
    * Copyright (C) 2004 Ulrich Hilger
    * This program is free software; you can redistribute it and/or
    * modify it under the terms of the GNU General Public License
    * as published by the Free Software Foundation; either version 2
    * of the License, or (at your option) any later version.
    * This program is distributed in the hope that it will be useful,
    * but WITHOUT ANY WARRANTY; without even the implied warranty of
    * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    * GNU General Public License for more details.
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    package com.lightdev.lib.audio;
    import java.io.File;
    import java.io.RandomAccessFile;
    import java.io.IOException;
    import java.io.Serializable;
    import java.text.DecimalFormat;
    * This class is a very simple implementation of an ID3v11Tag. It models an ID3 tag
    * pretty much the same way as it is physically stored inside an audio file.
    * <p>See <a href="http://www.id3.org">http://www.id3.org</a> for details about
    * ID3 tags.</p>
    * @author Ulrich Hilger
    * @author Light Development
    * @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
    * @author <a href="mailto:[email protected]">[email protected]</a>
    * @author published under the terms and conditions of the
    *      GNU General Public License,
    *      for details see file gpl.txt in the distribution
    *      package of this software
    * @version Version 1, October 13, 2004
    public class ID3v11Tag implements Serializable, Comparable {
       * construct an ID3v11Tag and read tag content from a given file
       * <p>This constructor can be used for cases where a RandomAccessFile has already
       * been opened and will be closed elsewhere</p>
       * @param rf RandomAccessFile  the open file to read from
       * @param isAtTagStartPos boolean  true, if the file pointer is at the
       * position where the ID3 tag starts; when false, the pointer is positioned accordingly here
       * @throws IOException
      public ID3v11Tag(RandomAccessFile rf, boolean isAtTagStartPos) throws IOException {
        if(isAtTagStartPos) {
          readTag(rf);
        else {
          readTag(rf, rf.length() - 128);
       * construct an ID3v11Tag and read tag content from a file at a given location
       * <p>This constructor opens and closes the audio file for reading</p>
       * @param absolutePath String  the absolute path to the audio file to open
       * @throws IOException
      public ID3v11Tag(String absolutePath) throws IOException {
        RandomAccessFile rf = new RandomAccessFile(absolutePath, "r");
        readTag(rf, rf.length() - 128);
        rf.close();
       * construct an ID3v11Tag and read tag content from a given file
       * <p>This constructor opens and closes the audio file for reading</p>
       * @param audioFile File  the audio file to read from
       * @throws IOException
      public ID3v11Tag(File audioFile) throws IOException {
        this(audioFile.getAbsolutePath());
       * get a string representation of this object
       * @return String
      public String toString() {
        DecimalFormat df = new DecimalFormat("00");
        return getArtist() + ", " + getAlbum() + " - " + df.format(getTrackNumber()) + " " + getTitle();
       * position to file pointer and read the tag
       * @param rf RandomAccessFile  the file to read from
       * @param jumpPos long  the position to jump to (the tag start position)
       * @throws IOException
      public void readTag(RandomAccessFile rf, long jumpPos) throws IOException {
        rf.seek(jumpPos);
        readTag(rf);
       * read the tag from a given file, assuming the file pointer to be at the tag start position
       * @param rf RandomAccessFile  the file to read from
       * @throws IOException
      public void readTag(RandomAccessFile rf) throws IOException {
        rf.read(tagBuf);
        if(tag.equalsIgnoreCase(new String(tagBuf))) {
          rf.read(title);
          rf.read(artist);
          rf.read(album);
          rf.read(year);
          rf.read(comment);
          rf.read(trackNo);
          rf.read(genre);
      public String getTitle() {
        return new String(title).trim();
      public String getArtist() {
        return new String(artist).trim();
      public String getAlbum() {
        return new String(album).trim();
      public String getYear() {
        return new String(year).trim();
      public String getComment() {
        return new String(comment).trim();
      public int getGenreId() {
        try {
          int id = new Byte(genre[0]).intValue();
          if(id < GENRE_ID_MIN || id > GENRE_ID_MAX) {
            return GENRE_ID_OTHER;
          else {
            return id;
        catch(Exception ex) {
          return GENRE_ID_OTHER;
      public String getGenreName() {
        return genreNames[getGenreId()];
      public int getTrackNumber() {
        try {
          return (int) trackNo[0];
        catch(Exception e) {
          return 0;
       * Compares this object with the specified object for order.
       * @param o the Object to be compared.
       * @return a negative integer, zero, or a positive integer as this object is less than, equal to,
       *                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    Hi Franck,
    thank you, mate. I did what you suggested (changed class attached) but that did not change the mentioned behaviour.
    The first run is approximately 75 seconds with Java option -Xms40m and approx. double without, the second run and all subsequent runs are only 2-3 seconds each (!!!) even when terminating and re-starting the application between thread runs.
    I'm pretty clueless about that, any more help on this anyone?
    Thanks a lot and best regards
    Ulrich
    PS: BTW, I forgot to post the class that is filled with data by class CollectionThread, so here it is
    * Light Development Playlist Editor
    * Copyright (C) 2004 Ulrich Hilger
    * This program is free software; you can redistribute it and/or
    * modify it under the terms of the GNU General Public License
    * as published by the Free Software Foundation; either version 2
    * of the License, or (at your option) any later version.
    * This program is distributed in the hope that it will be useful,
    * but WITHOUT ANY WARRANTY; without even the implied warranty of
    * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    * GNU General Public License for more details.
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    package com.lightdev.app.playlisteditor.data;
    import java.io.File;
    import com.lightdev.lib.audio.ID3v11Tag;
    import javax.sound.sampled.UnsupportedAudioFileException;
    import java.io.IOException;
    import java.io.Serializable;
    import com.lightdev.lib.audio.AudioFileDescriptor;
    import com.lightdev.lib.ui.SortListModel;
    import java.util.Iterator;
    * Storage model for audio data.
    * <p>
    * <code>AudioDataModel</code> can be used to store ID3 tag data collected from
    * a directory with audio files to perform queries and reports on the found data.
    * </p>
    * <p>See <a href="http://www.id3.org">http://www.id3.org</a> for details about
    * ID3 tags.</p>
    * @author Ulrich Hilger
    * @author Light Development
    * @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
    * @author <a href="mailto:[email protected]">[email protected]</a>
    * @author published under the terms and conditions of the
    *      GNU General Public License,
    *      for details see file gpl.txt in the distribution
    *      package of this software as well as any licensing notes
    *      inside this documentation
    * @version 1, October 15, 2004
    public class AudioDataModel extends SortListModel implements Serializable {
       * constructor
      public AudioDataModel() {
       * add an audio track from a given audio file
       * <p>This will attempt to read ID3 tag data from the file.</p>
       * @param audioFile File  the file to add audio data for
       * @throws IOException
      public void addTrack(File audioFile) throws IOException {
        AudioFileDescriptor afd = new AudioFileDescriptor(audioFile.getAbsolutePath());
        if (!data.contains(afd)) {
          data.add(afd);
       * get all tracks for agiven combination of genre name, artist name and album name. Any of
       * the parameters may be null or AudioDataModel.FILTER_ALL
       * <p>Ugly code, I know, but it simply hard codes all combinations of the the mentioned
       * parameters. Any more elegant implementations welcome.</p>
       * @param genreName String  a genre name to get tracks for
       * @param artistName String  an artist name to get tracks for
       * @param albumName String  an album name to get tracks for
       * @return SortListModel   the found tracks in a list model
      public SortListModel getTracks(String genreName, String artistName, String albumName) {
        SortListModel foundTracks = new SortListModel();
        Iterator e = data.iterator();
        while(e.hasNext()) {
          AudioFileDescriptor afd = (AudioFileDescriptor) e.next();
          ID3v11Tag tag = afd.getID3v11Tag();
          if(genreName == null || genreName.equalsIgnoreCase(FILTER_ALL)) {
            if(artistName == null || artistName.equalsIgnoreCase(FILTER_ALL)) {
              if (tag.getAlbum().equalsIgnoreCase(albumName))
                foundTracks.add(afd);
            else {
              if(albumName == null || albumName.equalsIgnoreCase(FILTER_ALL)) {
                if (tag.getArtist().equalsIgnoreCase(artistName))
                  foundTracks.add(afd);
              else {
                if (tag.getArtist().equalsIgnoreCase(artistName) &&
                    tag.getAlbum().equalsIgnoreCase(albumName))
                  foundTracks.add(afd);
          else {
            if(artistName == null || artistName.equalsIgnoreCase(FILTER_ALL)) {
              if(albumName == null || albumName.equalsIgnoreCase(FILTER_ALL)) {
                if (tag.getGenreName().equalsIgnoreCase(genreName))
                  foundTracks.add(afd);
              else {
                if (tag.getGenreName().equalsIgnoreCase(genreName) &&
                    tag.getAlbum().equalsIgnoreCase(albumName))
                  foundTracks.add(afd);
            else {
              if(albumName == null || albumName.equalsIgnoreCase(FILTER_ALL)) {
                if (tag.getGenreName().equalsIgnoreCase(genreName) &&
                    tag.getArtist().equalsIgnoreCase(artistName))
                  foundTracks.add(afd);
              else {
                if (tag.getGenreName().equalsIgnoreCase(genreName) &&
                    tag.getArtist().equalsIgnoreCase(artistName) &&
                    tag.getAlbum().equalsIgnoreCase(albumName))
                  foundTracks.add(afd);
        foundTracks.sort();
        return foundTracks;
       * list all artists in this model
       * @return SortListModel
      public SortListModel listArtists() {
        SortListModel artists = new SortListModel();
        artists.add(FILTER_ALL);
        Iterator e = data.iterator();
        while (e.hasNext()) {
          ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
          String artistName = tag.getArtist();
          if (artists.indexOf(artistName) < 0) {
            artists.add(artistName);
        artists.sort();
        return artists;
       * list all artists in this model having titles belonging to a given genre
       * @param genreName String  name of the genre artists are searched for
       * @return SortListModel
      public SortListModel listArtists(String genreName) {
        SortListModel artists = new SortListModel();
        artists.add(FILTER_ALL);
        Iterator e = data.iterator();
        while (e.hasNext()) {
          ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
          String artistName = tag.getArtist();
          String genre = tag.getGenreName();
          if (artists.indexOf(artistName) < 0 && genre.equalsIgnoreCase(genreName)) {
            artists.add(artistName);
        artists.sort();
        return artists;
       * list all genres in this model
       * @return SortListModel
      public SortListModel listGenres() {
        SortListModel genres = new SortListModel();
        genres.add(FILTER_ALL);
        Iterator e = data.iterator();
        while (e.hasNext()) {
          ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
          String genreName = tag.getGenreName();
          if (genres.indexOf(genreName) < 0) {
            genres.add(genreName);
        genres.sort();
        return genres;
       * list all albums in this model
       * @return SortListModel
      public SortListModel listAlbums() {
        SortListModel albums = new SortListModel();
        albums.add(FILTER_ALL);
        Iterator e = data.iterator();
        while (e.hasNext()) {
          ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
          String albumName = tag.getAlbum();
          if (albums.indexOf(albumName) < 0) {
            albums.add(albumName);
        albums.sort();
        return albums;
       * list all albums in this model having titles belonging to a given genre
       * @param genreName String  name of the genre albums are searched for
       * @return SortListModel
      public SortListModel listAlbums(String genreName) {
        SortListModel albums = new SortListModel();
        albums.add(FILTER_ALL);
        Iterator e = data.iterator();
        while (e.hasNext()) {
          ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
          String albumName = tag.getAlbum();
          String genre = tag.getGenreName();
          if (albums.indexOf(albumName) < 0 && genre.equalsIgnoreCase(genreName)) {
            albums.add(albumName);
        albums.sort();
        return albums;
       * list all albums in this model having titles belonging to a given genre and artist
       * @param genreName String  name of the genre albums are searched for
       * @param artistName String  name of the artist albums are searched for
       * @return SortListModel
      public SortListModel listAlbums(String genreName, String artistName) {
        SortListModel albums = new SortListModel();
        albums.add(FILTER_ALL);
        Iterator e = data.iterator();
        while (e.hasNext()) {
          ID3v11Tag tag = ((AudioFileDescriptor) e.next()).getID3v11Tag();
          String albumName = tag.getAlbum();
          String genre = tag.getGenreName();
          String artist = tag.getArtist();
          if(genreName == null || genreName.equalsIgnoreCase(FILTER_ALL)) {
            if (albums.indexOf(albumName) < 0 &&
                artist.equalsIgnoreCase(artistName))
              albums.add(albumName);
          else {
            if (albums.indexOf(albumName) < 0 &&
                genre.equalsIgnoreCase(genreName) &&
                artist.equalsIgnoreCase(artistName))
              albums.add(albumName);
        albums.sort();
        return albums;
       * get the number of audio tracks stored in this data model
       * @return int  the number of tracks
      public int getTrackCount() {
        return data.size();
      /** constant to select all items of a given part */
      public static final String FILTER_ALL = "    all";
    }...and here the changed CollectionThread now caching found File objects in a vector
    * Light Development Playlist Editor
    * Copyright (C) 2004 Ulrich Hilger
    * This program is free software; you can redistribute it and/or
    * modify it under the terms of the GNU General Public License
    * as published by the Free Software Foundation; either version 2
    * of the License, or (at your option) any later version.
    * This program is distributed in the hope that it will be useful,
    * but WITHOUT ANY WARRANTY; without even the implied warranty of
    * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    * GNU General Public License for more details.
    * You should have received a copy of the GNU General Public License
    * along with this program; if not, write to the Free Software
    * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    package com.lightdev.app.playlisteditor.data;
    import com.lightdev.lib.util.InfoThread;
    import java.io.File;
    import java.util.Vector;
    import java.util.Enumeration;
    * A class to collect audio data from a given storage location.
    * <p>
    * <code>CollectionThread</code> uses ID3 tag information to gain data.
    * </p>
    * <p>See <a href="http://www.id3.org">http://www.id3.org</a> for details about
    * ID3 tags.</p>
    * @author Ulrich Hilger
    * @author Light Development
    * @author <a href="http://www.lightdev.com">http://www.lightdev.com</a>
    * @author <a href="mailto:[email protected]">[email protected]</a>
    * @author published under the terms and conditions of the
    *      GNU General Public License,
    *      for details see file gpl.txt in the distribution
    *      package of this software as well as any licensing notes
    *      inside this documentation
    * @version 1, October 13, 2004
    public class CollectionThread extends InfoThread {
       * constructor
       * @param model  AudioDataModel  the data model to collect data to
      public CollectionThread(AudioDataModel model) {
        this.model = model;
       * constructor, creates a new empty AudioDataModel
      public CollectionThread() {
        this(new AudioDataModel());
       * set the data model to collect data to
       * @param model AudioDataModel  the model to collect data to
      public void setModel(AudioDataModel model) {
        this.model = model;
       * get the data model associated to this thread
       * @return AudioDataModel  the data model
      public AudioDataModel getModel() {
        return model;
       * set the directory to collect data from
       * @param rootDir File  the directory to collect data from
      public void setRootDirectory(File rootDir) {
        this.rootDir = rootDir;
       * this is the method to prepare a thread to run.
      protected void prepareThread() {
        maxValue = -1;
        filesProcessed = 0;
        innerCount = 0;
        fileList = new Vector();
       * do the actual work of this thread, i.e. iterate through a given directory
       * structure and collect audio data
       * @return boolean  true, if work is left
      protected boolean work() {
        boolean workIsLeft = true;
        if(getStatus() < STATUS_HALT_PENDING) {
          countElements(rootDir.listFiles());
        if(getStatus() < STATUS_HALT_PENDING) {
          workIsLeft = collect(); //collect(rootDir.listFiles());
          fileList.clear();
          fileList = null;
        return workIsLeft;
       * count the elements in a given file array including its subdirectories
       * @param files File[]
      private void countElements(File[] files) {
        int i = 0;
        while (i < files.length && getStatus() < STATUS_HALT_PENDING) {
          File file = files;
    if (file.isDirectory()) {
    countElements(file.listFiles());
    else {
    fileList.add(file);
    i++;
    maxValue++;
    * read data into model
    * @param files File[] the file array representing the content of a given directory
    * @return boolean true, if work is left
    private boolean collect(/*File[] files*/) {
    Enumeration files = fileList.elements();
    while(files.hasMoreElements() && getStatus() < STATUS_HALT_PENDING) {
    File file = (File) files.nextElement();
    try {
    model.addTrack(file);
    catch(Exception e) {
    fireThreadException(e);
    filesProcessed++;
    if(++innerCount > 99) {
    innerCount = 0;
    fireThreadProgress(filesProcessed);
    return false;
    int i = 0;
    while(i < files.length && getStatus() < STATUS_HALT_PENDING) {
    File file = files[i];
    if(file.isDirectory()) {
    collect(file.listFiles());
    else if(file.getName().toLowerCase().endsWith("mp3")) {
    try {
    model.addTrack(file);
    catch(Exception e) {
    fireThreadException(e);
    i++;
    filesProcessed++;
    fireThreadProgress(filesProcessed);
    return (i<files.length);
    /** the directory to collect data from */
    private File rootDir;
    /** the data model to collect data to */
    private AudioDataModel model;
    /** the number of files this thread processed so far while it is running */
    private long filesProcessed = 0;
    /** a list to temporary store found files */
    private Vector fileList;
    /** counter to determine when to fire progress messages */
    private int innerCount = 0;

  • Very slow performance running Mavericks - need troubleshooting help

    Hello folks:
    I have a MBP 2011 which was upgraded to Mavericks from Mountain Lion about 6 weeks ago. Since then I have had a major performance drop - slow machine, very slow window renderings, etc. I know a number of people have been facing these issues and have been recommended to clean up 3rd party extensions/agents. I ran Etrecheck (report below) and I need some help with fixing the failed kernel extensions and launch daemons. Thanks much!
    Pavan
    Hardware Information:
      MacBook Pro (13-inch, Late 2011)
      MacBook Pro - model: MacBookPro8,1
      1 2.8 GHz Intel Core i7 CPU: 2 cores
      4 GB RAM
    Video Information:
      Intel HD Graphics 3000 - VRAM: 384 MB
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 1.9 - SDK 10.9
      AppleAVBAudio: Version: 2.0.0 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    System Software:
      OS X 10.9 (13A603) - Uptime: 6 days 4:6:6
    Disk Information:
      TOSHIBA MK7559GSXF disk0 : (750.16 GB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      Hurricane (disk0s2) /: 749.3 GB (257.76 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-8A8 
    USB Information:
      Western Digital My Book 1148 3 TB
      EFI (disk4s1) <not mounted>: 209.7 MB
      disk4s2 (disk4s2) <not mounted>: 3 TB
      Boot OS X (disk4s3) <not mounted>: 134.2 MB
      Apple Computer, Inc. IR Receiver
      Apple Inc. FaceTime HD Camera (Built-in)
      Memorex TRAVELDRIVE 005B 16.01 GB
      EFI (disk2s1) <not mounted>: 209.7 MB
      Untitled (disk2s2) /Volumes/Untitled: 15.67 GB (15.63 GB free)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
      Apple Inc. thunderbolt_bus
    Kernel Extensions:
      com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6)
    Problem System Launch Daemons:
      [failed] com.apple.AOSNotificationOSX.plist
      [failed] com.apple.installd.plist
      [failed] com.apple.softwareupdated.plist
      [failed] com.apple.wdhelper.plist
    Problem System Launch Agents:
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist
      [loaded] com.adobe.versioncueCS3.plist
      [loaded] com.barebones.textwrangler.plist
      [loaded] com.cisco.anyconnect.vpnagentd.plist
      [loaded] com.google.keystone.daemon.plist
      [loaded] com.microsoft.office.licensing.helper.plist
      [loaded] com.oracle.java.Helper-Tool.plist
      [loaded] org.macosforge.xquartz.privileged_startx.plist
    Launch Agents:
      [loaded] com.cisco.anyconnect.gui.plist
      [loaded] com.google.keystone.agent.plist
      [loaded] com.oracle.java.Java-Updater.plist
      [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
      [failed] com.apple.CSConfigDotMacCert-[redacted]@me.com-SharedServices.Agent.plist
      [loaded] com.google.Chrome.framework.plist
    User Login Items:
      Flux
      iTunesHelper
      Google Drive
      Google Chrome
      AdobeResourceSynchronizer
    3rd Party Preference Panes:
      Flash Player
      Java
    Internet Plug-ins::
      o1dbrowserplugin: Version: 4.9.1.16010
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 2.2.0.49
      Loki: Version: 3.0
      net.juniper.DSSafariExtensions: Version: (null)
      RealPlayer Plugin: Version: Unknown
      FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
      DivXBrowserPlugin: Version: 1.3
      Silverlight: Version: 5.1.20513.0 - SDK 10.6
      Flash Player: Version: 11.9.900.170 - SDK 10.6
      AmazonMP3DownloaderPlugin: Version: Unknown
      googletalkbrowserplugin: Version: 4.9.1.16010
      npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
      iPhotoPhotocast: Version: 6.0
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
      JavaAppletPlugin: Version: Java 7 Update 45
    User Internet Plug-ins::
      Picasa: Version: 1.0
      Google Earth Web Plug-in: Version: 7.1
    Bad Fonts:
      None
    Old applications:
      Audacity: Version: 1.3.14.0 - SDK 10.4
      /Applications/Audacity/Audacity.app
      Hugin: Version: 2011.4.0 - SDK 10.4
      /Applications/Hugin/Hugin.app
      Keynote: Version: 5.3 - SDK 10.5
      /Applications/iWork '09/Keynote.app
      Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
      Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
      /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
      Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
      Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
      Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
      Microsoft Database Utility: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
      Microsoft Document Connection: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Document Connection.app
      Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
      /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
      Microsoft Excel: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Excel.app
      Microsoft Graph: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
      Microsoft Language Register: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
      Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
      Microsoft Outlook: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Outlook.app
      Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
      Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
      /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
      Microsoft Upload Center: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
      Microsoft Word: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Word.app
      My Day: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/My Day.app
      Open XML for Excel: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
      PTBatcherGUI: Version: 2011.4.0 - SDK 10.4
      /Applications/Hugin/PTBatcherGUI.app
      Picasa: Version: 3.9.16 - SDK 10.4
      /Applications/Picasa.app
      SLLauncher: Version: 1.0 - SDK 10.5
      /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
      Solver: Version: 1.0 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
      Spotify: Version: 0.8.4.107.g4fa0003f - SDK 10.5
      /Applications/Spotify.app
      SyncServicesAgent: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
      calibrate_lens_gui: Version: 2011.4.0 - SDK 10.4
      /Applications/Hugin/calibrate_lens_gui.app
    Time Machine:
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Hurricane: Disk size: 697.84 GB Disk used: 457.78 GB
      Destinations:
      Gasolina [Local] (Last used)
      Total size: 3 
      Total number of backups: 18
      Oldest backup: 2013-07-09 19:11:24 +0000
      Last backup: 2013-12-13 19:35:36 +0000
      Size of backup disk: Excellent
      Backup size 3  > (Disk size 697.84 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          22% storeagent
          2% WindowServer
          1% backupd
          1% Google Chrome
          1% EtreCheck
    Top Processes by Memory:
      119 MB Google Chrome
      102 MB Google Chrome Helper
      82 MB mds_stores
      57 MB Finder
      33 MB WindowServer
    Virtual Memory Statistics:
      45 MB Free RAM
      792 MB Active RAM
      748 MB Inactive RAM
      1.06 GB Wired RAM
      37.63 GB Page-ins
      1.98 GB Page-outs

    Here’s your report with some comments:
    Hardware Information:
      MacBook Pro (13-inch, Late 2011)
      MacBook Pro - model: MacBookPro8,1
      1 2.8 GHz Intel Core i7 CPU: 2 cores
      4 GB RAM
    Video Information:
      Intel HD Graphics 3000 - VRAM: 384 MB
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 1.9 - SDK 10.9
      AppleAVBAudio: Version: 2.0.0 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    System Software:
      OS X 10.9 (13A603) - Uptime: 6 days 4:6:6
    Disk Information:
      TOSHIBA MK7559GSXF disk0 : (750.16 GB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      Hurricane (disk0s2) /: 749.3 GB (257.76 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-8A8
    USB Information:
      Western Digital My Book 1148 3 TB    WD drives are one of the worst things that can happen to a mac. They have software on the drive and also in the firmware of the drive enclosure that is incompatible with Mavericks. The software that they also want you to install on your mac (to run the drive with the shitware on it that is incompatible with Mavericks) is also incompatible with Mavericks. The best thing to do with this drive is to open it and remove the hard drive and put it into a new (non-WD) enclosure. Then smash the WD enclosure into little bits with a sledgehammer and mail it back to WD.
      EFI (disk4s1) <not mounted>: 209.7 MB
      disk4s2 (disk4s2) <not mounted>: 3 TB
      Boot OS X (disk4s3) <not mounted>: 134.2 MB
      Apple Computer, Inc. IR Receiver
      Apple Inc. FaceTime HD Camera (Built-in)
      Memorex TRAVELDRIVE 005B 16.01 GB
      EFI (disk2s1) <not mounted>: 209.7 MB
      Untitled (disk2s2) /Volumes/Untitled: 15.67 GB (15.63 GB free)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
      Apple Inc. thunderbolt_bus
    Kernel Extensions:
    com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6)     This would be part of the shitware that you installed from WD. I would  uninstall the WD application that installs this driver. If the driver is still there after that, I'd look for the extension in /System/Library/Extensions and delete it from there. This may have damaged your kernel, though. If your performance is not improved after removing the WD app and this extension, you should probably back up your documents, erase your HD, and do a clean reinstall of Mavericks.
    Problem System Launch Daemons:
    [failed] com.apple.AOSNotificationOSX.plist    
    [failed] com.apple.installd.plist
      [failed] com.apple.softwareupdated.plist
      [failed] com.apple.wdhelper.plist    These four are all apple software. I would try repairing your hard drive: Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery . Then restart, reassess your mac’s performance, and rerun Etrecheck. If that doesn’t work, I’d reinstall Mavericks over your current installation. If that doesn’t work, I’d do a clean install.
    Problem System Launch Agents:
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist
      [loaded] com.adobe.versioncueCS3.plist
      [loaded] com.barebones.textwrangler.plist 
      [loaded] com.cisco.anyconnect.vpnagentd.plist
      [loaded] com.google.keystone.daemon.plist    spyware from google
      [loaded] com.microsoft.office.licensing.helper.plist
      [loaded] com.oracle.java.Helper-Tool.plist
      [loaded] org.macosforge.xquartz.privileged_startx.plist
    Launch Agents:
      [loaded] com.cisco.anyconnect.gui.plist
    [loaded] com.google.keystone.agent.plist
      [loaded] com.oracle.java.Java-Updater.plist
      [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
    [failed] com.apple.CSConfigDotMacCert-[redacted]@me.com-SharedServices.Agent.plist   see the suggestions above.
    [loaded] com.google.Chrome.framework.plist    This is why I prefer Safari. It doesn’t install all this extra junk.
    User Login Items:
      Flux
      iTunesHelper
    Google Drive   Last I heard Google drive was incompatible with Mavericks.
      Google Chrome
      AdobeResourceSynchronizer
    3rd Party Preference Panes:
      Flash Player
      Java
    Internet Plug-ins::   Way too many of these. If you have poor browser performance, get rid of these, and then only reinstall ones you absolutely need, and make sure they are mavericks compatible and up-to-date.
      o1dbrowserplugin: Version: 4.9.1.16010
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 2.2.0.49
      Loki: Version: 3.0
      net.juniper.DSSafariExtensions: Version: (null)
      RealPlayer Plugin: Version: Unknown
      FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
      DivXBrowserPlugin: Version: 1.3
      Silverlight: Version: 5.1.20513.0 - SDK 10.6
      Flash Player: Version: 11.9.900.170 - SDK 10.6
      AmazonMP3DownloaderPlugin: Version: Unknown
      googletalkbrowserplugin: Version: 4.9.1.16010
      npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
      iPhotoPhotocast: Version: 6.0
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
      JavaAppletPlugin: Version: Java 7 Update 45
    User Internet Plug-ins::
      Picasa: Version: 1.0
      Google Earth Web Plug-in: Version: 7.1
    Bad Fonts:
      None
    Old applications:
      Audacity: Version: 1.3.14.0 - SDK 10.4
      /Applications/Audacity/Audacity.app
      Hugin: Version: 2011.4.0 - SDK 10.4
      /Applications/Hugin/Hugin.app
      Keynote: Version: 5.3 - SDK 10.5
      /Applications/iWork '09/Keynote.app
      Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
      Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
      /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
      Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
      Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
      Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
      Microsoft Database Utility: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
      Microsoft Document Connection: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Document Connection.app
      Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
      /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
      Microsoft Excel: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Excel.app
      Microsoft Graph: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
      Microsoft Language Register: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
      Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
      Microsoft Outlook: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Outlook.app
      Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
      Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
      /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
      Microsoft Upload Center: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
      Microsoft Word: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Microsoft Word.app
      My Day: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/My Day.app
      Open XML for Excel: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
      PTBatcherGUI: Version: 2011.4.0 - SDK 10.4
      /Applications/Hugin/PTBatcherGUI.app
      Picasa: Version: 3.9.16 - SDK 10.4
      /Applications/Picasa.app
      SLLauncher: Version: 1.0 - SDK 10.5
      /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
      Solver: Version: 1.0 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
      Spotify: Version: 0.8.4.107.g4fa0003f - SDK 10.5
      /Applications/Spotify.app
      SyncServicesAgent: Version: 14.3.9 - SDK 10.5
      /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
      calibrate_lens_gui: Version: 2011.4.0 - SDK 10.4
      /Applications/Hugin/calibrate_lens_gui.app
    Time Machine:
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Hurricane: Disk size: 697.84 GB Disk used: 457.78 GB
      Destinations:
      Gasolina [Local] (Last used)
      Total size: 3
      Total number of backups: 18
      Oldest backup: 2013-07-09 19:11:24 +0000
      Last backup: 2013-12-13 19:35:36 +0000
      Size of backup disk: Excellent
      Backup size 3  > (Disk size 697.84 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          22% storeagent
          2% WindowServer
          1% backupd
          1% Google Chrome
          1% EtreCheck
    Top Processes by Memory:
      119 MB Google Chrome
      102 MB Google Chrome Helper
      82 MB mds_stores
      57 MB Finder
      33 MB WindowServer
    Virtual Memory Statistics:
      45 MB Free RAM
      792 MB Active RAM
      748 MB Inactive RAM
      1.06 GB Wired RAM
      37.63 GB Page-ins
      1.98 GB Page-outs  This is the highest amount of page-outs I have ever seen. I'd get rid of Chrome and Google Drive. Dropbox works fine and doesn't screw up my mac.

  • I need Fusion help creating a demo of BRM JCA Resource Adapter

    I need Fusion help creating a demo of BRM JCA Resource Adapter.
    I know BRM well but am clueless with Fusion.
    I am trying to figure out what Fusion products to download and install and how I manipulate the Fusion side to manipulate BRM.
    My BRM docs say:
    Installing the BRM JCA Resource Adapter ->
    Software requirements
    (yada yada install a bunch of BRM stuff I know how to do)
    The adapter must be deployed on a J2EE 1.4-compliant application server that has implemented the JCA 1.5 specification. The adapter runs only in a managed environment. (Does this imply some particular Fusion package?)
    (more yada yada about installing more BRM packages I know how to do)
    Deploying and configuring the BRM JCA Resource Adapter ->
    Overview of the BRM JCA Resource Adapter configuration procedure
    The procedure for setting up the BRM JCA Resource Adapter includes the following tasks:
    Installing the adapter on your BRM system, if you have not already done so. See Installing the BRM JCA Resource Adapter.
    Generating the schema files for the adapter. See Generating the schema files for your system. (links to some BRM commands np)
    Specifying how to construct XML tags. See Specifying the XML tags for extended fields. (links to an oob file included with directions on how to address BRM customizations np)
    Generating the WSDL files for the adapter. See Generating the WSDL files for your system. (links to an oob file with directions to configure. I could use some help if/when I get this far)
    The last two look pretty important but I haven't a clue. I pasted the text from the docs below.
    Deploying the adapter on your application server. See Deploying the BRM JCA Resource Adapter on an Oracle application server.
    Connecting the adapter to the BRM software. See Connecting the adapter to BRM in Oracle AS.
    Deploying the BRM JCA Resource Adapter on an Oracle application server
    The adapter is dependent on Java Archive (JAR) files to deploy properly. The following table lists the JAR files that the adapter requires from each application in your system.
    Application
    JAR files
    J2EE application server
    classes12.jar, connector15.jar, and jta.jar
    Oracle BPEL process
    bpm-infra.jar, orabpel-thirdparty.jar, orabpel.jar, and xmlparserv2.jar
    BRM J2EE Resource Adapter
    pcm.jar and pcmext.jar
    Apache
    xercesImpl.jar
    If you are deploying the adapter in a standalone Oracle Containers for Java EE (OC4J) instance, make sure these JAR files are available to the class loader that is loading the adapter.
    If you are deploying the adapter by using Oracle SOA Suite, these JAR files are available as part of the oracle.bpel.common code source. You import these libraries as follows:
    Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
    Add the oracle.bpel.common entry (shown in bold below) to the imported-shared-libraries section of the file:
    <imported-shared-libraries>
    <import-shared-library name="adf.oracle.domain"/>
    <import-shared-library name="oracle.bpel.common"/>
    </imported-shared-libraries>
    Save and close the file.
    Restart the application server or the J2EE instance.
    After you make the JAR files available, deploy the adapter on the Oracle application server by using either the Oracle Application Server (Oracle AS) Application Server Control (ASC) or the Oracle admintool.jar file. Copy the adapter archive file (BRM_home/apps/brm_integrations/jca_adapter/OracleBRMJCA15Adapter.rar) from the installation directory to a location that is accessible to the adapter deployment tool. You can then open and deploy the archive file on your application server.
    After successful deployment, return the applications.xml file to its original settings and add the oracle.bpel.common codesource to the BRM Adapter oc4j-ra.xml file:
    Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
    Remove the following oracle.bpel.common entry (shown in bold below):
    <imported-shared-libraries>
    <import-shared-library name="adf.oracle.domain"/>
    <import-shared-library name="oracle.bpel.common"/>
    </imported-shared-libraries>
    Save and close the file.
    Open the JCA Resource Adapter oc4j-ra.xml file from the Oracle_home/j2ee/Instance/application-deployments/default/BRMAdapterDeploymentName directory.
    Add the oracle.bpel.common entry (shown in bold below) to the oc4j-connector-factories section of the file:
    <oc4j-connector-factories...>
    <imported-shared-libraries>
    <import-shared-library name="oracle.bpel.common"/>
    </imported-shared-libraries>
    <oc4j-connector-factories>
    Save and close the file.
    Restart the application server or the J2EE instance.
    For more information about deploying the adapter, see your application server’s documentation.
    Connecting the adapter to BRM in Oracle AS
    You connect the adapter to the BRM software by creating connection pools and connection factories. As part of the adapter deployment, the application server creates oc4j-ra.xml from the packaged ra.xml. The ra.xml file is located in the Oracle_home/j2ee/Instance/connectors/AdapterDeploymentName/AdapterDeploymentName/META-INF directory. For example, Oracle_home/j2ee/home/connectors/BRMAdapter/BRMAdapter/META-INF/ra.xml.
    Use the resource adapter home page from the Oracle AS ASC page to create connection pools and connection factories.
    Create your connection pool by following the performance and tuning guidelines in Configuring Connection Pooling in OC4J in Oracle Containers for J2EE Resource Adapter Administrator's Guide. See download.oracle.com/docs/cd/B31017_01/web.1013/b28956/conncont.htm.
    Make sure you set the pool’s Maximum Connections parameter (maxConnections XML entity) equal to or greater than the Oracle BPEL process manager’s dspMaxThreads parameter. For more information, see Oracle BPEL Process Manager Performance Tuning in Oracle Application Server Performance Guide for 10g Release 3 (10.1.3.1.0) at download.oracle.com/docs/cd/B31017_01/core.1013/b28942/tuning_bpel.htm.
    Note To set up JCA Resource Adapter transaction management in BPEL, you must create a private connection pool and set its Inactive Connection Timeout property (inactivity-timeout XML entity) to 0. See About JCA Resource Adapter transaction management in BPEL for more information.
    Create as many connection factories as your system needs. For each connection factory, specify the following:
    The JNDI location for the connection factory.
    The connection pool to use.
    How to connect to BRM by using these entries:
    Entry
    Description
    ConnectionString
    Specify the protocol, host name, and port number for connecting to the BRM software. For example: ip Server1 12006.
    DBNumber
    Specify the database number for the BRM database. For example, enter 1 or 0.0.0.1 for database 0.0.0.1.
    InputValidation
    Specifies whether to validate the input XMLRecord:
    True — The adapter validates the input XMLRecord against the opcode schema.
    False — The adapter does not validate the input XMLRecord.
    The default is False.
    This overrides any other validation parameter specified in the WSDL file.
    OutputValidation
    Specifies whether to validate the output XMLRecord:
    True — The adapter validates the output XMLRecord against the opcode schema.
    False — The adapter does not validate the output XMLRecord.
    The default is False.
    This overrides any other validation parameter specified in the WSDL file.
    LoginType
    Specifies the authentication method:
    1 — The adapter logs in to BRM by using the specified login name and password.
    0 — The adapter logs in to BRM by using the specified service type and POID ID.
    The default is 1.
    UserName
    Specifies the login name the adapter uses for logging in to the BRM software.
    Note This entry is required only if LoginType is set to 1.
    Password
    Specify the password the adapter uses for logging in to the BRM software.
    Note This entry is required only if LoginType is set to 1.
    PoidID
    Specifies the POID ID. This entry should be set to 1.
    ServiceType
    Specifies the service the adapter uses to log in to the BRM software.
    The default is /service/pcm_client.
    You have successfully configured the adapter to connect to BRM.

    I need Fusion help creating a demo of BRM JCA Resource Adapter.
    I know BRM well but am clueless with Fusion.
    I am trying to figure out what Fusion products to download and install and how I manipulate the Fusion side to manipulate BRM.
    My BRM docs say:
    Installing the BRM JCA Resource Adapter ->
    Software requirements
    (yada yada install a bunch of BRM stuff I know how to do)
    The adapter must be deployed on a J2EE 1.4-compliant application server that has implemented the JCA 1.5 specification. The adapter runs only in a managed environment. (Does this imply some particular Fusion package?)
    (more yada yada about installing more BRM packages I know how to do)
    Deploying and configuring the BRM JCA Resource Adapter ->
    Overview of the BRM JCA Resource Adapter configuration procedure
    The procedure for setting up the BRM JCA Resource Adapter includes the following tasks:
    Installing the adapter on your BRM system, if you have not already done so. See Installing the BRM JCA Resource Adapter.
    Generating the schema files for the adapter. See Generating the schema files for your system. (links to some BRM commands np)
    Specifying how to construct XML tags. See Specifying the XML tags for extended fields. (links to an oob file included with directions on how to address BRM customizations np)
    Generating the WSDL files for the adapter. See Generating the WSDL files for your system. (links to an oob file with directions to configure. I could use some help if/when I get this far)
    The last two look pretty important but I haven't a clue. I pasted the text from the docs below.
    Deploying the adapter on your application server. See Deploying the BRM JCA Resource Adapter on an Oracle application server.
    Connecting the adapter to the BRM software. See Connecting the adapter to BRM in Oracle AS.
    Deploying the BRM JCA Resource Adapter on an Oracle application server
    The adapter is dependent on Java Archive (JAR) files to deploy properly. The following table lists the JAR files that the adapter requires from each application in your system.
    Application
    JAR files
    J2EE application server
    classes12.jar, connector15.jar, and jta.jar
    Oracle BPEL process
    bpm-infra.jar, orabpel-thirdparty.jar, orabpel.jar, and xmlparserv2.jar
    BRM J2EE Resource Adapter
    pcm.jar and pcmext.jar
    Apache
    xercesImpl.jar
    If you are deploying the adapter in a standalone Oracle Containers for Java EE (OC4J) instance, make sure these JAR files are available to the class loader that is loading the adapter.
    If you are deploying the adapter by using Oracle SOA Suite, these JAR files are available as part of the oracle.bpel.common code source. You import these libraries as follows:
    Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
    Add the oracle.bpel.common entry (shown in bold below) to the imported-shared-libraries section of the file:
    <imported-shared-libraries>
    <import-shared-library name="adf.oracle.domain"/>
    <import-shared-library name="oracle.bpel.common"/>
    </imported-shared-libraries>
    Save and close the file.
    Restart the application server or the J2EE instance.
    After you make the JAR files available, deploy the adapter on the Oracle application server by using either the Oracle Application Server (Oracle AS) Application Server Control (ASC) or the Oracle admintool.jar file. Copy the adapter archive file (BRM_home/apps/brm_integrations/jca_adapter/OracleBRMJCA15Adapter.rar) from the installation directory to a location that is accessible to the adapter deployment tool. You can then open and deploy the archive file on your application server.
    After successful deployment, return the applications.xml file to its original settings and add the oracle.bpel.common codesource to the BRM Adapter oc4j-ra.xml file:
    Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
    Remove the following oracle.bpel.common entry (shown in bold below):
    <imported-shared-libraries>
    <import-shared-library name="adf.oracle.domain"/>
    <import-shared-library name="oracle.bpel.common"/>
    </imported-shared-libraries>
    Save and close the file.
    Open the JCA Resource Adapter oc4j-ra.xml file from the Oracle_home/j2ee/Instance/application-deployments/default/BRMAdapterDeploymentName directory.
    Add the oracle.bpel.common entry (shown in bold below) to the oc4j-connector-factories section of the file:
    <oc4j-connector-factories...>
    <imported-shared-libraries>
    <import-shared-library name="oracle.bpel.common"/>
    </imported-shared-libraries>
    <oc4j-connector-factories>
    Save and close the file.
    Restart the application server or the J2EE instance.
    For more information about deploying the adapter, see your application server’s documentation.
    Connecting the adapter to BRM in Oracle AS
    You connect the adapter to the BRM software by creating connection pools and connection factories. As part of the adapter deployment, the application server creates oc4j-ra.xml from the packaged ra.xml. The ra.xml file is located in the Oracle_home/j2ee/Instance/connectors/AdapterDeploymentName/AdapterDeploymentName/META-INF directory. For example, Oracle_home/j2ee/home/connectors/BRMAdapter/BRMAdapter/META-INF/ra.xml.
    Use the resource adapter home page from the Oracle AS ASC page to create connection pools and connection factories.
    Create your connection pool by following the performance and tuning guidelines in Configuring Connection Pooling in OC4J in Oracle Containers for J2EE Resource Adapter Administrator's Guide. See download.oracle.com/docs/cd/B31017_01/web.1013/b28956/conncont.htm.
    Make sure you set the pool’s Maximum Connections parameter (maxConnections XML entity) equal to or greater than the Oracle BPEL process manager’s dspMaxThreads parameter. For more information, see Oracle BPEL Process Manager Performance Tuning in Oracle Application Server Performance Guide for 10g Release 3 (10.1.3.1.0) at download.oracle.com/docs/cd/B31017_01/core.1013/b28942/tuning_bpel.htm.
    Note To set up JCA Resource Adapter transaction management in BPEL, you must create a private connection pool and set its Inactive Connection Timeout property (inactivity-timeout XML entity) to 0. See About JCA Resource Adapter transaction management in BPEL for more information.
    Create as many connection factories as your system needs. For each connection factory, specify the following:
    The JNDI location for the connection factory.
    The connection pool to use.
    How to connect to BRM by using these entries:
    Entry
    Description
    ConnectionString
    Specify the protocol, host name, and port number for connecting to the BRM software. For example: ip Server1 12006.
    DBNumber
    Specify the database number for the BRM database. For example, enter 1 or 0.0.0.1 for database 0.0.0.1.
    InputValidation
    Specifies whether to validate the input XMLRecord:
    True — The adapter validates the input XMLRecord against the opcode schema.
    False — The adapter does not validate the input XMLRecord.
    The default is False.
    This overrides any other validation parameter specified in the WSDL file.
    OutputValidation
    Specifies whether to validate the output XMLRecord:
    True — The adapter validates the output XMLRecord against the opcode schema.
    False — The adapter does not validate the output XMLRecord.
    The default is False.
    This overrides any other validation parameter specified in the WSDL file.
    LoginType
    Specifies the authentication method:
    1 — The adapter logs in to BRM by using the specified login name and password.
    0 — The adapter logs in to BRM by using the specified service type and POID ID.
    The default is 1.
    UserName
    Specifies the login name the adapter uses for logging in to the BRM software.
    Note This entry is required only if LoginType is set to 1.
    Password
    Specify the password the adapter uses for logging in to the BRM software.
    Note This entry is required only if LoginType is set to 1.
    PoidID
    Specifies the POID ID. This entry should be set to 1.
    ServiceType
    Specifies the service the adapter uses to log in to the BRM software.
    The default is /service/pcm_client.
    You have successfully configured the adapter to connect to BRM.

  • Need some help in creating Search Help for standard screen/field

    I need some help in adding a search-help to a standard screen-field.
    Transaction Code - PP01,
    Plan Version - Current Plan (PLVAR = '01'),
    Object Type - Position ( OTYPE = 'S'),
    Click on Infotype Name - Object ( Infotype 1000) and Create.
    I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
    I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
    I specify again, I have to add a new search help to standard screen/field and not to enhance it.
    This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
    There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
    It's urgent.
    Thanks in advace. Suitable answers will be rewarded

    Hi Pradeep,
    Please have a look into the below site which might be useful
    Enhancing a Standard Search Help
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
    edc983384237
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
    A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
    This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
    A search help exit is called at certain timepoints in the input help process.
    Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
    Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
    During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
    If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
    timepoints
    The following timepoints are defined:
    1. SELONE
    Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
    Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
    The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
    2. PRESEL1
    After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
    3. PRESEL
    Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
    4. SELECT
    Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
    5. DISP
    Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
    6. RETURN (usually as return value for the next timepoint)
    The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
    It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
    7. RETTOP
    You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
    8. EXIT (only for return as next timepoint)
    The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
    9. CREATE
    The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
    The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
    10. APP1, APP2, APP3
    If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
    Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
    If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
    F4IF_SHLP_EXIT_EXAMPLE
    This module has been created as an example for the interface and design of Search help exits in Search help.
    All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
    A search help exit is called repeatedly in connection with several
    events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
    However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
    The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
    Hope this info will help you.
    ***Reward points if found useful
    Regards,
    Naresh

  • RFC to XI to File (FTP) Scenario ? Need your help

    Hi XI Experts,
    currently I am into one the problem where I am doing one scenario which has the case of executing RFC on the SAP RFC side and based on which I will be getting the output table which will converted to XML by SAP XI and then we get that to download to FTP server as xml file only initally.
    error I am facing below:
    11/14/09 18:00     Success     The message was successfully retrieved from the call queue.
    11/14/09 18:00     Success     The message status set to DLNG.
    11/14/09 18:00     Error     Received XI System Error. ErrorCode: NO_MAPPINGPROGRAM_FOUND ErrorText:   ErrorStack: Interface mapping Object ID 18C33445E45E347387DC803834A96D42 Software Component 8E59D621C60211DEA247C2AB0A60051A does not exist in runtime cache
    11/14/09 18:00     Error     Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGRAM_FOUND:.
    11/14/09 18:00     Error     Transmitting the message using connection http://tpxidq.mycompany.com:8000/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGRAM_FOUND:.
    11/14/09 18:00     Error     The message status set to FAIL.
    11/14/09 18:00     Error     Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGRAM_FOUND:
    11/14/09 18:00     Error     MP: Exception caught with cause com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGRAM_FOUND:
    And this is first time we are doing this type scenario if any help regarding whole scenario is also welcome.
    Thanks in advance guys, I appreciate your time and effort.
    Thanks & Regards,
    Gaurav Patwari
    Edited by: GauravPa on Nov 14, 2009 2:15 PM

    NO_MAPPINGPROGRAM_FOUND
    1) Open Interface Determination in ID and check if correct source and target interfaces are entered there.
    2) Also check the name of the Interface/ Operation Mapping whic is included in the Interface Determination
    3) Make some dummy change to this Interface Determination and again activate
    4) Check the ache Status in ID --> Environment --> cache Status Overview
    5) In SXI_CACHE check if the Interface mapping and Interface Determination are present
    6) If needed perform a cache refresh
    Regards,
    Abhishek.

  • Need some help with the Select query.

    Need some help with the Select query.
    I had created a Z table with the following fields :
    ZADS :
    MANDT
    VKORG
    ABGRU.
    I had written a select query as below :
    select single vkorg abgru from ZADS into it_rej.
    IT_REJ is a Work area:
    DATA : BEGIN OF IT_REJ,
            VKORG TYPE VBAK-VKORG,
            ABGRU TYPE VBAP-ABGRU,
           END OF IT_REJ.
    This is causing performance issue. They are asking me to include the where condition for this select query.
    What should be my select query here?
    Please suggest....
    Any suggestion will be apprecaiated!
    Regards,
    Developer

    Hello Everybody!
    Thank you for all your response!
    I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
    I had created a Z table with the following fields :
    ZADS :
    MANDT
    VKORG
    ABGRU.
    I had written a select query as below :
    I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table 
    select vkorg abgru from ZADS into it_rej.
    Earlier :
    IT_REJ is a Work area:
    DATA : BEGIN OF IT_REJ,
    VKORG TYPE VBAK-VKORG,
    ABGRU TYPE VBAP-ABGRU,
    END OF IT_REJ.
    Now :
    DATA : BEGIN OF IT_REJ occurs 0,
    VKORG TYPE VBAK-VKORG,
    ABGRU TYPE VBAP-ABGRU,
    END OF IT_REJ.
    I guess this will fix the issue correct?
    PLease suggest!
    Regards,
    Developer.

  • Hi.. Need ur Help

    Hi
    Please tell me details steps in ALE and Idoc .. i am very new  and need ur help plz tell in details with example..
    thanks..

    Hi,
    ALE
    check url
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/ale/configuration.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapdevelopment.co.uk/training
    And also u can get lots of inof from the below link.
    http://www.sapgenie.com/ale/why_ale.htm
    IDOC
    Data Creation in Idoc
    IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
    asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
    While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
    IDoc is a intermediate document to exchange data between two SAP Systems.
    *IDocs are structured ASCII files (or a virtual equivalent).
    *Electronic Interchange Document
    *They are the file format used by SAP R/3 to exchange data with foreign systems.
    *Data Is transmitted in ASCII format, i.e. human readable form
    *IDocs exchange messages
    *IDocs are used like classical interface files
    IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
    WE30 - you can create a IDOC type.
    An IDOC with data, will have to be triggered by the application that is trying to send out the data.
    FOr testing you can use WE19.
    How to create idoc?
    *WE30 - you can create a IDOC type
    For more information in details on the same along with the examples can be viewed on:
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
    http://www.sappoint.com/presentation.html
    http://www.allsaplinks.com/idoc_search.html
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://www.erpgenie.com/sapedi/idoc_abap.htm
    To Create Idoc we need to follow these steps:
    Create Segment ( WE31)
    Create Idoc Type ( WE30 )
    Create Message Type ( WE81 )
    Assign Idoc Type to Message Type ( WE82 )
    Creating a Segment
    Go to transaction code WE31
    Enter the name for your segment type and click on the Create icon
    Type the short text
    Enter the variable names and data elements
    Save it and go back
    Go to Edit -> Set Release
    Follow steps to create more number of segments
    Create IDOC Type
    Go to transaction code WE30
    Enter the Object Name, select Basic type and click Create icon
    Select the create new option and enter a description for your basic IDOC type and press enter
    Select the IDOC Name and click Create icon
    The system prompts us to enter a segment type and its attributes
    Choose the appropriate values and press Enter
    The system transfers the name of the segment type to the IDOC editor.
    Follow these steps to add more number of segments to Parent or as Parent-child relation
    Save it and go back
    Go to Edit -> Set release
    Create Message Type
    Go to transaction code WE81
    Change the details from Display mode to Change mode
    After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter
    Click New Entries to create new Message Type
    Fill details
    Save it and go back
    Assign Message Type to IDoc Type
    Go to transaction code WE82
    Change the details from Display mode to Change mode
    After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.
    Click New Entries to create new Message Type.
    Fill details
    Save it and go back
    Check these out..
    Re: How to create IDOC
    Check below link. It will give the step by step procedure for IDOC creation.
    http://www.supinfo-projects.com/cn/2005/idocs_en/2/
    ALE/ IDOC
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
    go trough these links.
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
    1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
    2.IDOCs are independent of the sending and receiving systems.
    3.IDOCs are independent of the direction of data exchange.
    The two available process for IDOCs are
    Outbound Process
    Inbound Process
    AND There are basically two types of IDOCs.
    Basic IDOCs
    Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
    Extended IDOCs
    Extending the functionality by adding more segments to existing Basic IDOCs.
    To Create Idoc we need to follow these steps:
    Create Segment ( WE31)
    Create Idoc Type ( WE30)
    Create Message Type ( WE81)
    Assign Idoc Type to Message Type ( WE82)
    imp links
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    www.sappoint.com
    --here u can find the ppts and basic seetings for ALE
    http://sappoint.com/presentation.html
    www.sapgenie.com
    http://www.sapgenie.com/ale/index.htm
    Check these links.
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
    Please check this PDF documents for ALE and IDoc.
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
    Check below link. It will give the step by step procedure for IDOC creation.
    http://www.supinfo-projects.com/cn/2005/idocs_en/2/
    Regards,
    Priyanka.

  • Need Urgent Help in PM8M-V H problem - keyboard freeze

    Hi everyone,
    I'm a newbie in this forum and I really need urgent help with my motherboard.
    My PC specification:
    Intel Pentium 4 2.4GHz
    MSI PM8M-V H W7104VMS v3.4 022206 14:32:17
    1GB(512MB x 2) Kingston PC3200 400MHz
    Seagate SATA II 320GB ST3320620SV (set with jumper to support SATA I)
    Power Color ATI Radeon 9550 256MB
    Lite-On DVDRW SHM-165P6S
    USB mouse, PS/2 Keyboard
    I really appreciate if anyone can help to guide me in solving my problem. My keyboard tends to freeze at the part where it says "Press any key to boot from CD". This limits me to do anything until I'm totally loaded into Windows.  Thus, disable me to perform any formating and fresh installation of OS. However, the keyboards works fine at the begining of the POST and in BIOS. Is there any settings in BIOS that i should perform?.....
    However, I realise in order to get through the foresaid message without the the keyboard freeze up is by keep on trying to boot up and shut down until it works (but only work once, then hv to try again), but this is not a solution as if what if I wanted to have 2 OS?... I cant use the keyboard to choose either of the OS installed. I have tried to change the RAM, change keyboard, use the build in VGA, or even remove the motherboard from the ATX casing - result: still have the same problem. What should I do??.. I have look around the forum for answers but there isnt any (I hope I didnt miss any). Is there any problem with my motherboard, or its BIOS, or any of the harware compatibility or etc..... what actually can I do?   
    I do not dare to perform any BIOS update Unnecessary (it seems that many have problems with BIOS problem in this forum) and moreover i think my BIOS is the most up-to-date. I cant find any new version in the net. Anyway I will check this topic frequently as possible to hope for any solution. What is the best solutions?
    Thanks.

    But the thing that makes me wonder is, my BIOS version is the latest but why this type of problem occurs??
    What version of BIOS should I use?? Any recommendation ??
    Thanks.

  • Need urgent help in listing out checklist from DBA prespective for BI Implementation Project

    Hello Guys,
    We are in Designing phase Data Modeling of PDW/APS Implementation Project.
    I need urgent help in making a checklist from a DBA perspective.
    Like what are things ill be needing at a time of implementation/Deployment.
    Your expert comments and help will be highly appreciated.
    Thank you,
    Anish.S
    Asandeen

    You can get good summary of checklist from this article about
    DBA checklist for data warehousing.
    Which highlights on below pointers:
    New system or old. (I.e. Up-gradation vs starting from scratch)
    Complexity of SQL Server architecture 
    SQL Server storage
    Determining SQL Server processing power
    SQL Server installation consideration 
    SQL Server configuration parameter
    SQL Server security
    SQL Server Database property
    SQL Server jobs and automation
    Protecting SQL Server data
    SQL Server health monitoring and check ups
    SQL Server ownership and control 
    based on my real time experience, I will suggest you to keep an eye on 
    Load performance (It will be useful when your database(Warehouse) will have huge amount of data)
    System availability (Check for Windows update and up time configuration) 
    Deployment methodology should be planned in advance. Development of packages and respective objects should be done systematically.
    Source control mechanism 
    Disk space and memory usage
    You might or might not have full rights on production environment, so be prepared to analyze production environment via Select statements [I guess you got my point]
    Proper implementation of Landing , Staging and Mart tables.
    Column size (this can drastically decrease your database size)
    Usage of indexes (Index are good, but at what cost?)
    I hope this will assist you in building your check list.

  • Need some help with GUI development

    Hi ppl.. I am new to labview and I am currently involved in a testing equipment development. I need some help. firstly I need to know if multi-screen GUI (with icons and stuff)is possible in Labview. Secondly I need to interface the measurements to a database. Would it be possible to create just small executable to perform the measurement part alone and do the rest of database operation using VB. (or would it be advisable to do the whole lot in labview)
    the final sft should look something like this
    screen1 :setup screen... interface with database
    screen2 :actual test and test results
    screen3 :log file creation
    measurement is via daq board and i also need to send some control signals and set up TCP/IP for data transfer.

    Hello.
    I am not completely sure what you mean by "multi-screen", but I am pretty sure that doing the user interface using a tab control will work for you. I have attached an example VI which is a state machine (which in LabVIEW you do with a case structure inside a while loop). Notice how the configuration controls are in the first page of the tab control, associated with state 0 of the state machine, but in the block diagram, they are actually used in state 1 of the state machine. Instead of writing a very long description, I will let you take a look at the code (which I saved in LV 7.0 version). Let me know if you have questions or comments
    Attachments:
    MultiScreenStateMachineExample.vi ‏50 KB

  • Need someone helps for several Problems on my 9630 Tour

    Hello,
    Well, these are list of problems with my 9630 Tour, and I need some helps to solve these :
    1. My 1st problem is, everytime my 9630 started its also a message appears : "uncaught exception index 8 >= 8"
    2. And I also realized that some missing application happened. My m-Banking application (already re-installed well) but it also lost of SMS icon. So the result is, everytime I sent an outgoing SMS  I couldn't save it. And I have made a test to sent SMS from my other number to this 9630 device, but 9630 couldn't show that any incoming message, even my other device has given me notification that message has been delivered.
    3. Its also often shutdown suddenly by itself, or its shutdown upon charging
    4. Charging tasks sometime couldn't be well charged. And finally I realized that my device has off in the middle of charging task, it may caused of charging wasn't recharge the device very well 
    Hopefully I can read your kindly solution on those problems happened. Thank you for your prompt response. 
    Anwar Hussein

    Hi and Welcome to the Community!
    I actually think that all of your issues are related, and rooted in the same problem...OS corruption or hardware failure. But, before you begin, please be sure you have a good backup...see the link in my auto-sig on this post for instructions for that process.
    Then, at the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
    You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
    You may also want to try this procedure to perhaps narrow down the precise causal item:
    Load your OS "bare bones"...if anything is optional, do not install it.
    If the behavior presents immediately, then try a different OS with step 1
    If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
    Add one thing -- no matter how tempting, just one.
    If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
    Repeat steps 4 and 5 until all things are loaded or the behavior presents
    When the behavior presents, you know the culprit...the last thing you loaded.
    If the behavior does not re-present, then you know that either step 1 or 2 cured it.
    If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Need some help understanding the way materialized views are applied through

    Hi, I need some help understanding the way materialized views are applied through adpatch.
    In patch 1, we have a mv with build mode immediate. When applying it PTS hang due to pool performance of mv refresh.
    So we provide patch 2, with that mv build mode deferred, hoping it'll go through. But patch 2 hang too on the same mv.
    How does this work? Is that because mv already exists in the database with build immediate, patch 2 will force it to refresh first before changing build mode? How to get over this?
    Thanks,
    Wei

    Hi Hussein,
    Thank you for the response.
    Application release is 11.5.10.
    Patch 1 is MSC11510: 8639586 ASCP ENGINE RUP#38 PATCH FOR 11.5.10 BRANCH
    Patch 2 is MSC11510: 9001833 APCC MSC_PHUB_CUSTOMERS_MV WORKER IS STUCK ON "DB FILE SEQUENTIAL READ" 12 HOURS
    The MV is APPS.MSC_PHUB_CUSTOMERS_MV
    This happens at customer environment but not reproducable in our internal environment, as our testing data is much smaller.
    Taking closer look in the logs, I saw actually when applying both patch 1 and patch 2, MV doesn't exist in the database. So seems my previous assumption is wrong. Still, strange that patch 2 contains only one file which is the MV.xdf, it took 7 hours and finally got killed.
    -- patch 1 log
    Materialized View Name is MSC_PHUB_CUSTOMERS_MV
    Materialized View does not exist in the target database
    Executing create Statement
    Create Statement is
    CREATE MATERIALIZED VIEW "APPS"."MSC_PHUB_CUSTOMERS_MV"
    ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 10 MAXTRANS 255 LOGGING
    STORAGE(INITIAL 4096 NEXT 131072 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 4 FREELIST GROUPS 4 BUFFER_POOL DEFAULT)
    TABLESPACE "APPS_TS_SUMMARY"
    BUILD IMMEDIATE
    USING INDEX
    REFRESH FORCE ON DEMAND
    WITH ROWID USING DEFAULT LOCAL ROLLBACK SEGMENT
    DISABLE QUERY REWRITE
    AS select distinct
    from
    dual
    AD Worker error:
    The above program failed. See the error messages listed
    above, if any, or see the log and output files for the program.
    Time when worker failed: Tue Feb 02 2010 10:01:46
    Manager says to quit.
    -- patch 2 log
    Materialized View Name is MSC_PHUB_CUSTOMERS_MV
    Materialized View does not exist in the target database
    Executing create Statement
    Create Statement is
    CREATE MATERIALIZED VIEW "APPS"."MSC_PHUB_CUSTOMERS_MV"
    ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 10 MAXTRANS 255 LOGGING
    STORAGE(INITIAL 4096 NEXT 131072 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 4 FREELIST GROUPS 4 BUFFER_POOL DEFAULT)
    TABLESPACE "APPS_TS_SUMMARY"
    BUILD DEFERRED
    USING INDEX
    REFRESH COMPLETE ON DEMAND
    WITH ROWID USING DEFAULT LOCAL ROLLBACK SEGMENT
    DISABLE QUERY REWRITE
    AS select distinct
    from dual
    Start time for statement above is Tue Feb 02 10:05:06 GMT 2010
    Exception occured ORA-00028: your session has been killed
    ORA-00028: your session has been killed
    ORA-06512: at "APPS.AD_MV", line 116
    ORA-06512: at "APPS.AD_MV", line 258
    ORA-06512: at line 1
    java.sql.SQLException: ORA-00028: your session has been killed
    ORA-00028: your session has been killed
    ORA-06512: at "APPS.AD_MV", line 116
    ORA-06512: at "APPS.AD_MV", line 258
    ORA-06512: at line 1
    Exception occured :No more data to read from socket
    AD Run Java Command is complete.
    Copyright (c) 2002 Oracle Corporation
    Redwood Shores, California, USA
    AD Java
    Version 11.5.0
    NOTE: You may not use this utility for custom development
    unless you have written permission from Oracle Corporation.
    AD Worker error:
    The above program failed. See the error messages listed
    above, if any, or see the log and output files for the program.
    Time when worker failed: Tue Feb 02 2010 19:51:27
    Start time for statement above is Tue Feb 02 12:44:52 GMT 2010
    End time for statement above is Tue Feb 02 19:51:29 GMT 2010
    Thanks,
    Wei

  • Please i need a help in updating my nokia 5800

    Hello everybody
    please I need a help
    when i am updating my nokia in to v40 from v21 using nokia update software it begins downloading but when it reaches 20 mb it returns a lot of times at last it said you have a low internet connectivity
    otherwise when i enter *#0000# and check for updates they said no updates are found
    what is the solution of my problems I have still try updating for more than 5  days but nothing has been changed.
    Can a body upload the update in others serves espically in mediafire sinnce mediafire is the best site for me to download from? please I need the update since my nokia now is slow and after update it will have new things and ofcourse will be speed up.
    please can anyone upload it using www.mediafire.com and thanks so much
    I want it quickly, and only mediafire for downloading working on my bad internet connectivity

    For performing a firmware update you need an high speed internet connection i dont know whats the speed of internet connection you are using, in this case you can go to nokia care point and get it updated. Thats safe and you won't brick your phone too. Firmware updates can be done only through nokia software updater application and through the phone(fota)by the end user and there is no way to put the update file to some place or server like what you asked for.
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • Need some help and guidance please!

    Hi everyone,
    I desperately need some help because I am at my wits end.   In September I purchased a Compaq Presario CQ60-450US.  Shortly after purchasing, I fresh installed Windows 7 Professional.  Recently I decided to tried to dual boot ubuntu on the machine only to find that the installation failed because of CD read error.  I know for a fact that the CD is not the issue because I have used this CD three other times to install ubuntu thus I came to the conclusion that the CD/DVD drive was bad.  
    I called HP support to get a new CD/DVD drive replaced only to spend 2 hours on the phone with a individual that decided to troubleshoot first trying to install ubuntu remotely (I informed the indiviual that the remote session would end), then by playing a DVD and "skipping throughout" the movie.  He/she said that she could see no issue.  (no diagnostic was run)I informed the individual that I had issues with buring as well.  He/she proceeded to go online and install software asking me to demonstrate the issue after which the call got dropped mysteriously.
    I called HP support back and told them that I am having an issue now burning.  They proceed to connect remotely and look at the software the previous support individual downloaded and said that the software was not supported by HP.  I informed the individual that I give permission to install any software needed to troubleshoot but the individual said that I could not be suppoted because I wasn't using the OS installed by HP.  I was instructed to recover my machine to the OS that was installed with the machine if I was to continue to get support.
    I informed the individual that the drivers and software are the same for either OS considering the CD/DVD rom is a plug and play device.  The individual refused to help and told me I had lost my warranty because of my decision to install an OS directly from Microsoft or a third paper vendor. 
    That is where I stand.  HP is refusing to give me support because I am not running their Vista Home edition even though my issue is hardware.  I cannot find any warrent information stating that I need to have the original operating system installed on the machine to receive support.   Can anyone point me to a reputable division that can help me with my issue?  I feel I was just thrown aside so that they don't have to initiate a repair.  If not has anyone filed a compalint against this outrageous support requirement?   

    Dear ndjumpball,
    I would like to say that I have some good -- or at least encouraging -- advice.  Regretfully, I do not.  I had issues with my dv7 practically since purchasing it a year ago specifically so I would have a reliable computer for school.  My first problem: I bought my laptop a mere 7 weeks before HP started offering their free upgrade to Windows 7.  Consequently, I was forced to purchase the full installation retail or continue to deal with the wonton freezes and system failures that inevitably occurred while I was working on homework -- courtesy of HP's installation of Vista Home Premium 64-bit.  Thankfully, I was able to purchase a copy of Windows 7 Professional 64-bit through a significant student discount offer from Microsoft, and I had my new OS downloaded the evening of October 23, 2009; I had to give their servers time to free up, since it seemed like everyone and their dogs were also downloading what the reviews posted on CNET and PC World touted as being more reliable.  I recall (I can't remember exactly which site this appeared) the statement, "Windows 7 is what Vista should have been from the beginning."
    I was all excited and happy now that I had a laptop for school that had everything I was looking for:  decent size hard drive, a fair amount of RAM, great 17.3" display with awesome colors, and a CDRW/DVDRW/Blu-Ray disk drive in the bay.  Not only was I very satisfied with the hardware; it also came with a decent host of software that are thought was pretty cool, too.  It came with CyberLink's DVD Suite 6 that I could activate simply by touching a soft button above the keyboard.  Aside from Vista Home Premium crashing on me at the most inopportune times, I was exceedingly happy with my $1000 purchase and investment.  Then came the "upgrade" to Windows 7 Professional 64-bit...Because I didn't have a "compatible" version of Vista, I had to do a full ("custom") install.  In other words, I lost all of the cool features I originally bought the machine for in the first place...no more cool one-finger's brush software activation (still don't have that working), and HP Chat Support told me the same thing they told you.  The following is a direct copy/paste quote from an email response I received from HP Total Care:  "In order to help you relevantly I would like to request you to please revert back to Vista operating system and check whether the issue is persisting or not.  If the issue is still persisting after reverting the operating system back to vista then we need to perform system recovery."
    After pursuing my case for 6 months -- finally getting my case escalated to two HP Customer Care Case Managers in Texas/Oklahoma -- the best "customer support" I received was what I'm sure was a truly heartfelt and sincere apology...  Oh, neither case manager was "able" to send me either the true upgrade disks that would have preserved the features purchased, nor were they willing to send me a stand-alone installation of the CyberLink’s DVD Suite 6 that is currently offered with the HP Pavilion dv6t Quad Edition series.  (In massive frustration and anger, I bought the CyberLink’s DVD software - $100 I didn't have to spend on something I had already bought...)
    A month later (late March), MY CD-RW/DVD-RW/Blu-Ray drive stopped working.  After an hour online with Customer Care, I had finally convinced the rep that the drive was working fine after my ditching Vista Home Premium, and that its failure had absolutely nothing to do with Windows 7 Pro.  After giving the guy my credit card number as security, I had a replacement drive shipped to me.
    My personal recommendation:  clearly state that the hardware failure had nothing to do with whatever software or OS you chose to install.  Bottom line:  your computer is only 8 months old and is still covered under warranty, they can replace the defective part, or you can return the entire machine.  You probably want to be the "Nice Guy" but you need to remind them that you have other brands available to purchase.
    I don't know if that helps or not, but thank you for giving me the opportunity to vent!  :-)

Maybe you are looking for

  • How to use the Keying of CompactPCI in my own designed PXI-module?

    as title. I've designed a own PXI-module.Since I havn't seen the CompactPCI Keying in J1 before, I don't know how to use it, or it is just necessary for special application field?

  • Licensing has stopped working; new computer

    I have Elements 6 and a new iMac running 10.8.5,  I got the above error message and it told me to  contact Adobe customer support.

  • Skype is slow when loading a chat screen.

    When I click on someone's name/icon to go to our conversation it takes upwards of 6-8 seconds to load the messages and such. Same thing with group chats. Also, the design on new Skype still makes my eyes bleed and removing group renaming is still a h

  • 9i Lite Optimizer

    Does anyone know of, has read or discussed the nature of the optimizer used by the Oracle Lite database engine ? I had a discussion with someone in Oracle development a few years back where it was claimed the 9i Lite kernel used a version of cost-bas

  • How to create secondary lists in ALV

    Hi all, Can u plz explain me how to create Secondary lists usingl ALV and how many secondary lists we can create. Thanks in advance Venkat