Need solution for Use Case - Page Fragment?
I have a set of controls and table which I need to insert into many tabs such that each tab displays the same table and functions but with slightly different data. The controls and table could be used in many different areas so doesn't make sense to code each and everyone mutiple times. I thought then that making this set of functions a page fragment and including it would do the trick, however, an exception that I have the same ID's defined was raised.
Can someone tell me what technology I should use for this use case such that one a single page with tabs I can include the same set of controls many times? Can page fragments be used multiple times on one page or do I need some sort of declarative component?
Thank you,
Kris
Task Flows is the way to go...
Just create a bounded task flow and create a default view activity (which is going to be your page fragment with table and other controls).
Now you can drop this TF on every tab and this way you will get a resuable table and control.
Read about Task flows in dev guide if you need further understanding on this.
One more thing, this will give you exactly same stuff on each tab. So, I am not sure what you want to change in every tab? A detailed description of your requirement might help.
Vik
Hope this helps
http://adfjsf.blogspot.com
http://www.linkedin.com/groupSharingMsg?displayCreate=&connId=-1&groupID=1801839
Similar Messages
-
Need solution for using Symbol LRT3840 with Apps 10.7 and/or 11i?
Any suggestions for using Symbol's scanner/terminal with Oracle 10.7 and/or 11i? The symbol unit runs a telnet session (with a 1/4 viewable area). I'm looking for some alternate screen templates and/or a software solution that will allow me to remap the existing full screen forms so all critical information is displayed on the symbol unit in the allowable viewing area. I understand that version 11i of Oracle Apps does not support character-based telnet sessions, so I'm also interested in a fix that will be transparent to my material handlers when we upgrade from 10.7 to 11i. Any help would be greatly appreciated.
Hi
We are developing solutions in that area.
If we can know more of the exisitng solution you have implemented or PDA and how it is integrated with Oracle Application(whether it is a third party tool?)
then we can discuss about arriving at a solution.
My mail-id is [email protected]
Thanks and Regards,
Bibs -
Need solution for use of IS/AS in function/procedure.
Hi All,
What is the diffence in IS / AS using in procedure /function ..
could you please tell ...There is no difference. They are interchangeable.
By convention, you will frequently see IS used in functions and AS used in stored procedures-- I'm guessing that in some ancient version of Oracle there was a difference. But it's now all a personal preference.
Justin -
How to use same page fragment more than once in a page,
Hi Gurus,
How to use same page fragment more than once in a page. I have a complex page fragment which has lots of Bindings (Binding Property set with backingBean variables).
I want to use the same page fragment multiple times on the same page with different tabs.
I want different ApplicationModule Instance for the page fragment in different tabs.
So I have created a Bounded Taskflow with pagefragments which has this complex pagefragment.
I've dragged the taskflow to page and created regions.
I'm able to execute the page successfully when I have only one region but fails if I have region more than once in the page.
Can anyone help me how to resolve this issue.
Web User Interface Developer's Guide for Oracle Application Development Framework: section 19-2 states we can have same pagefragment more than once in a page.
Thanks,
Satyajava.lang.IllegalStateException: Duplicate component id: 'pt1:r1:0:t2:si5', first used in tag: 'com.sun.faces.taglib.jsf_core.SelectItemsTag'
+id: j_id_id1
type: javax.faces.component.UIViewRoot@1d23189
+id: d1
type: RichDocument[UIXFacesBeanImpl, id=d1]
+id: j_id_id5
type: HtmlScript[UIXFacesBeanImpl, id=j_id_id5]
+id: j_id0
type: javax.faces.component.html.HtmlOutputText@bc252
+id: m1
type: RichMessages[UINodeFacesBean, id=m1]
+id: f1
type: RichForm[UIXFacesBeanImpl, id=f1]
+id: pt1
type: RichPageTemplate[oracle.adf.view.rich.component.fragment.UIXInclude$ContextualFacesBeanWrapper@2a0cc, id=pt1]
+id: ps1
type: RichPanelSplitter[UIXFacesBeanImpl, id=ps1]
+id: pt3
at javax.faces.webapp.UIComponentClassicTagBase.doStartTag(UIComponentClassicTagBase.java:1199)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag265(__projectrevenuern_jsff.java:12356)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag264(__projectrevenuern_jsff.java:12317)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag263(__projectrevenuern_jsff.java:12262)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag262(__projectrevenuern_jsff.java:12200)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag261(__projectrevenuern_jsff.java:12147)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag260(__projectrevenuern_jsff.java:12099)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag259(__projectrevenuern_jsff.java:12047)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag258(__projectrevenuern_jsff.java:11992)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag257(__projectrevenuern_jsff.java:11948)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag255(__projectrevenuern_jsff.java:11860)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag254(__projectrevenuern_jsff.java:11808)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag9(__projectrevenuern_jsff.java:510)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag8(__projectrevenuern_jsff.java:461)
at jsp_servlet.__projectrevenuern_jsff._jspx___tag1(__projectrevenuern_jsff.java:149)
at jsp_servlet.__projectrevenuern_jsff._jspService(__projectrevenuern_jsff.java:67)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:429)
at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:443)
at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:153)
at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:128)
at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:492)
at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag50(__projectrevenuepg_jspx.java:2392)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag49(__projectrevenuepg_jspx.java:2353)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag46(__projectrevenuepg_jspx.java:2209)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag45(__projectrevenuepg_jspx.java:2162)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag9(__projectrevenuepg_jspx.java:526)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag8(__projectrevenuepg_jspx.java:475)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag7(__projectrevenuepg_jspx.java:424)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag6(__projectrevenuepg_jspx.java:373)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag2(__projectrevenuepg_jspx.java:202)
at jsp_servlet.__projectrevenuepg_jspx._jspx___tag1(__projectrevenuepg_jspx.java:144)
at jsp_servlet.__projectrevenuepg_jspx._jspService(__projectrevenuepg_jspx.java:71)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:248)
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:473)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:141)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = CAMIND1 TXID = CONTEXTID = TIMESTAMP = 1262712477691
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<JMXWatchNotificationListener><handleNotification> failure creating incident from WLDF notification
oracle.dfw.incident.IncidentCreationException: DFW-40116: failure creating incident
Cause: DFW-40112: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
DIA-48494: ADR home is not set, the corresponding operation cannot be done
Action: Ensure that command line tool "adrci" can be executed from the command line.
at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:708)
at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createIncident(DiagnosticsDataExtractorImpl.java:246)
at oracle.dfw.spi.weblogic.JMXWatchNotificationListener.handleNotification(JMXWatchNotificationListener.java:195)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor$ListenerWrapper.handleNotification(DefaultMBeanServerInterceptor.java:1732)
at javax.management.NotificationBroadcasterSupport.handleNotification(NotificationBroadcasterSupport.java:257)
at javax.management.NotificationBroadcasterSupport$SendNotifJob.run(NotificationBroadcasterSupport.java:322)
at javax.management.NotificationBroadcasterSupport$1.execute(NotificationBroadcasterSupport.java:307)
at javax.management.NotificationBroadcasterSupport.sendNotification(NotificationBroadcasterSupport.java:229)
at weblogic.management.jmx.modelmbean.WLSModelMBean.sendNotification(WLSModelMBean.java:824)
at weblogic.diagnostics.watch.JMXNotificationProducer.postJMXNotification(JMXNotificationProducer.java:79)
at weblogic.diagnostics.watch.JMXNotificationProducer.sendNotification(JMXNotificationProducer.java:104)
at com.bea.diagnostics.notifications.JMXNotificationService.send(JMXNotificationService.java:122)
at weblogic.diagnostics.watch.JMXNotificationListener.processWatchNotification(JMXNotificationListener.java:103)
at weblogic.diagnostics.watch.Watch.performNotifications(Watch.java:621)
at weblogic.diagnostics.watch.Watch.evaluateLogRuleWatch(Watch.java:546)
at weblogic.diagnostics.watch.WatchManager.evaluateLogEventRulesAsync(WatchManager.java:765)
at weblogic.diagnostics.watch.WatchManager.run(WatchManager.java:525)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.dfw.common.DiagnosticsException: DFW-40112: failed to execute the adrci commands "create home base=C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr product_type=ofm product_id=defaultdomain instance_id=defaultserver
set base C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr
set homepath diag\ofm\defaultdomain\defaultserver
create incident problem_key="BEA-101020 [HTTP]" error_facility="BEA" error_number=101020 error_message="null" create_time="2010-01-05 12:27:58.155 -05:00" ecid="0000INzXpbB7u1MLqMS4yY1BGrHn00000K"
Cause: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
DIA-48494: ADR home is not set, the corresponding operation cannot be done
Action: Ensure that command line tool "adrci" can be executed from the command line.
at oracle.dfw.impl.incident.ADRHelper.invoke(ADRHelper.java:1052)
at oracle.dfw.impl.incident.ADRHelper.createIncident(ADRHelper.java:786)
at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:688)
... 19 moreI get the above Error.
I have checked the bindings and it has 2 instances of the taskflow.
I have changed the backingbean scope to backingBean -
I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please
http://www.apple.com/support/itunes/contact/
-
Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"
I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.
-
forgot icloud password, how to get it recover without any question and also alternative email because someone hacked my alternative email id. need password for using icloud hopefully i will get result from you as your earliest.
I'm sorry, but I know nothing about iCloud email. I stayed away from iCloud email and only use iCloud for limited purposes.
But take a look at this discussion and read the response from randers4. He is one of the iCloud experts in the Apple Support Communities.
https://discussions.apple.com/message/24358339#24358339
If that doesn't help, you might be better off posting in here where there are other more knowledgable iCloud users.
https://discussions.apple.com/community/icloud/icloud_on_my_ios_device -
Solution for scanning multiple pages from inside the form6i/10g
Hi All,
I need to scan multiple pages from Oracle forms (6i/10g) using a scanner which is scanning multiple pages per minute. Can any one post a solution for me.
Hafeezhere are the two ways I use to scan images.
1) if the image is a single TIF image then d2kwutil can upload the image into a BLOB field on the database (but it is limited to only SINGLE-page TIFs).
2) if the image is a single or multi-page PDF, then your forms client must copy the image to a filesystem location known by the database (where the filesystem location is a directory on the database), and then the database can import the image into a BLOB field within the database.
either solutions work pretty fast for me (<10 seconds per image)
Chris -
Css style class can't be used in Page Fragment?
I need to use css to modify pages. When I open a page fragment and want to apply a css rule to a button, i can't find any styleClass available in popup window: Properties->Appreaance->styleClass.
Does anyone have any idea?Hi,
You are correct - there is a current limitation that we are working to fix. For now, you can manually add style parameters to the <div in the .jsp. I have also seen div id rule classes in the stylesheet e.g. div#content and then manually applied the div id="content" in the .jsp before the directive include.
/krys
Creator Team -
Looking for a nice solution for different cases with nearly same operations
Hi everybody:
I'm looking for a nice solution for the following problem:
I'm measuring different data at the same time (with different devices).
I would like to save these data all in one array (or cluster?), but I
don't know exactly the way to do this. All values have corresponding
time values. So for one data type it would result in a 2d array,
wouldn't it? But how can I save different data types with their time
values in one array? Or should I take a cluster? And how can I get only
a certain type of data out of this array or cluster again? E.g. if I
only need data type "3" with its time stamps for evaluation? I would
really appreciate an example, I work with LV 7. Thanks!
Then - for evaluation - I only need one data type of these different
data. Which one I would like to choose via the frontpanel (it changes
from test to test). So, I thought of a case structure (where I can
choose which data type and correspondingly which evaluation way). The
evaluation steps for the different data types are quite the same, but
can vary in order of execution. I could write for every case the
(nearly) same evaluation steps, but this would take a lot of time, plus
if I need to change one step I need to change it in every case.
Does anybody know a better way?
Thank you very much in advance,
Steffisteffi.kono wrote:
In this example I have four arrays, which I would like to save alltogether in one file. First column should consists of time stamps, second column of value type 1, third column of value type 2, ... How can I solve this?
Built the 4 1D arrays into a 2D array, the use write to spreadsheet file.
steffi.kono wrote:
And, after that, how can I display only the second coulmn (e.g.) and time stamps in a waveform chart from this file? Or how can I say in LabVIEW: "display the last 30 values of column three over the time in a waveform chart"?
There is "array subset", which allows you to get any desired subset from an array. If yoyu want entire rows or colums, use "index array".
To display the last 30 values in a chart, just feed the data to a chart with the history size set to 30 elements. The rest will fall into place.
LabVIEW Champion . Do more with less code and in less time . -
Need Solution for iWeb/QuickTime viewing problem in IE 6 for Windows
When viewing an iWeb page in IE 6 for Windows with a background picture and a QuickTime movie embeded, the QT movie frame will "smear" when the page is scrolled. More specifically, The QT movie frame will not lock into its proper position as long as the page has a background picture selected in iWeb when viewing w/ IE 6 for Windows. Does anyone know of a solution for this? Does this problem still exist w/ later versions of IE for Windows?
By the way, if you don't already know this, changing the Page Background setting back to the default of 'Color Fill' in iWeb and republishing will not correct the problem once a background picture is selected for a page. You have to set the Page Background setting to 'None' and republish. The movie frame will then be locked into place when scrolling the page in IE 6 for Windows.
MBP 17in (1 GB RAM), PB G4 15in, PB G4 12in, iMac G3 Mac OS X (10.4.7) Loyal to Apple since the Apple ][+Someone else posted that you may have to remove the image altogether, publish, then place the replacement image. The images for the background of my newest pages use this as a tiled background successfully.
http://web.mac.com/makentosh/iWeb/tipsfromtheiceberg/Images/background.jpg
I'm not sure how well tiling would work on your page though since it would begin to repeat vertically when you don't want it to (for me, tiling is exactly what I needed). -
Need solution for dynamic pick lists in Crystal Reports
Does anyone have a good solution for creating a dynamic pick list for a Crystal Report that is based off of a BW Query without having to use a BW user input variable? In many cases it is not practical to use a BW variable to generate a dynamic pick list due to the high number of possible member values and the highly dynamic nature of the particular characteristic (customers, materials, etc.). In my understanding the LOV Server is not an option when dealing with SAP BW. Anyone else running into this issue with Crystal and SAP BW?
Hi Mike,
we once solved this by creating LOVs in BusinessView Manager. I am not sure if you can use the BW Publisher in this scenario as we did not use it. We published the reports directly to the BOE server for some reasons.
Creating a LOV in BusinessView manager is really easy. You can create cascading prompts, shedule refreshing of the lists, ...
By using the cascading prompt feature you can make prompts like this:
First enter the customer number (or pick it from a list) and then the second list, which holds the materials only has shows the ones which had been purchased by that customer. I think this is what you are looking for.
You should give it a try!
Thorsten -
Need solution for a Reporting Requirement
Hello Experts,
I need design a solution for Report, where in I need to show ageing of Invoice based of Due date of Invoice for last four weeks as explained below:
In cube i have records like this:
Industry Invoice Number Due Date Amount
8111 IV1 13/04/2011 1000
8111 IV2 17/04/2011 1000
Say current week end date is 03/05/2011, now I need to show data for last 4 weeks in report, by calculting what is due at that weekend date e.g. there is no amount due on 12/04/2011, but next week on 19th amount due in 1000, then subsequent week there are 2 Inv. due, amount for 26th is 2000. Similarly there is additional invoice after 26th, so amount on 3rd remains the same i.e. 2000.
Industry Week End date AR Amount due
8111 12/04/2010 0
8111 19/04/2010 1000
8111 26/04/2010 2000
8111 03/05/2010 2000
Please let me know what is the best solution to achive this, as data volume would be high i.e.
1. In Bex query, is this can be done, if yes how?
2. Or we need to do this in EDW, by having additonal cube, if yes how?
Please let me know if you have solution for this.
Regards,
VipulHi All,
Thanks for the replies.
Please tell me if I can call a file sender communication channel from an UDF and pass the dinamic configuration values at runtime.
If this is possible, I think the above requirement is addressed.
Please tell me in case of any more solutions too.
Thanks once again.
Regards. -
Need solution for opening multiple connection to server in parallel
Hi..
I have used URL and URLConnectin classes to open connection to server,
and i used URLConnection.getInputStream( ) to download HTML pages.
Now my requirement is to open more than one connecton to single HTML document and download the file in parallel.
for example, if the HTML file size is 60KB..then i open three connection and
connection 1 downloads first 20KB
connection 2 downloads second 20KB
connection 3 downloads final 20KB
all the above should be done in parallel....by threading or else..
first of all i want to know is it possible to do the above in java?
anybody having solution for the above requirement?
venuhi,
i too have the same problem
actually i am designing a download manager ,and had the same problem
that how to put multiple threads for doing it ,,,,
have u got solution for it..
if so please help me..
my mail id is [email protected]
i want help in designing the download manager
can any one help me out plzzzzzzzzzzzzzz
bye -
Need solutions for PC to HDTV connection
Alright folks after searching around and not finding exactly what I'm looking for, it's time to post a new thread. I've been to multiple sites reading their information, watching their videos, trying what they say to do. No joy still. I have a question about connecting my bosses older computer to a new HDTV, the vision here is a room full of decision makers with my boss at his computer running a PowerPoint presentation, (so we can all see it without crowding around his desk) then we make decisions as a workgroup, looking at the HDTV from around the table. He also needs to have the PPT presentation on both his monitor, and the HDTV screen. Computer Specs: DELL Optiplex 760 Video Adapter: ATI Radeon HD 3450 w/DVI-D out, and 4 pin S-video out The video adapter DVI out has a splitter cable attached that connects via VGA connectors to two DELL monitors. The S-Video port is unused (I tried to connect this way but could not). HDTV Specs: The HDTV has S-Video in, HDMI x3, RCA, VGA x1. Cables available for use: 25' VGA w/audio 20' S-Video 4-pin Can we connect using current hardware or do we need to purchase extra hardware? What type of hardware? We have BestBuy stores # 763 and 852 at our disposal if materials need to be purchased.
There is no reason other than hardware failure for your S-Video not working. Make sure that when your S-Video is connected, you change the PC's display to clone mode. Right click anywhere on the desktop and click on the ATI Catalyst Control Center. If it prompts you to choose between basic or advanced, choose advanced. The menu to left should have a "Manage Displays" option or something similar. You can set the monitors to clone from there. If you do not have a Catalyst option after you right click, you can go into display properties then settings then Catalyst Control Center.
This is probably something you already know, but just in case... Make sure the TV's source is set to S-Video
Maybe you are looking for
-
I have 6GB of ram, a fresh install of Windows 7 x64, and the screenshot shows what happens after leaving my PC on for a couple days. (3782+MB being used by modified memory ATM). http://wow.deconstruct.me/images/ExcessiveMemory.jpg Any ideas on this?
-
Hi I have list of some products on my jsp page. If you click some product hyperlink is constructed like this: products.jsp?id=smth&smthelse=smthelse but I don't want my parameters to be displayed in URL. I created buffer page where I put my parameter
-
I want to securely extend my network to improve strength of signal in the basement, where I have an Apple TV. Now signal strength is 4 (out of 5), but have had some problems streaming from Netflix.
-
Why i can't hear the sound from my macbook air on the left hand speaker?
why i can't hear the sound from my macbook air on the left hand speaker? I think it have some problem with the hardware. and what can I do now? Please help.
-
When I choose edit in Silver Efex Pro 2, a TIFF file is created and because I have the setting "Stack with Original" checked, it keeps the photos together. The problem is that it then moves both files (RAW and new TIFF) to the end of my LightRoom li