Need step by step directions to install a replacement Power Supply for a HP Color LaserJet 1215

I have a HP Color LaserJet 1215 printer that is only a couple of years old. Had a power problem at home that burnt out the power supplies of two HP Towers, a DSL Modem, and (I think) the power supply of my printer. I have located a replacement power supply but would sure appreciate any one that would know how to replace. I need a step by step guide aas to how to perform such a task.
It would also help to have a diagram of the printer showing precisely how to get to the power supply.
Thanks in advance for any and all help. I have spent days looking for this information and can't seem to find any.

How do I start using the reciept scanner

Similar Messages

"You need to restart your computer. Hold down the power button for seve..."

Hello,
I have recently been getting this same message "You need to restart your computer. Hold down the power button for several seconds or press the Restart button." whenever I start up my computer. It happens about 95% of the time. I have been reading on different forums that I should reset the PRam and the NVRam and I have been doing so and it does help as it does EVENTUALLY start up (sometimes takes me 5-10 min. to get it to start up).
I have also read that it may be the RAM that is loose, so I did check that and made sure that the ram is properly placed (which it is).
I don't know what else I can do. Should I reformat and reinstall Mac OS X?
Here is the exact error form the dump:
IOAPIC: Version 0x20 Vectors 64:87
AppleACPIPlatformExpert::start failed
panic(cpu 0 caller 0x55c095): "Unable to find driver for this platform: \"Macbook 2,1\".\n"@/SourceCache/xnu/xnu-1504.9.26/iokit/Kernel/IOPlatformExpert.cpp:1389
Debugger called: <panic>

Well just got around to installing the new HDD and RAM yesterday, and I am sad to say... that the problem persists. :/
I reseated the memory and made sure they were in there properly, and I also installed the HDD and ran DiskUtility before I erased/reformatted and installed a fresh version of MacOSX Leopard, then updated to Snow Leopard.
As long as I am using my computer everything works fine, the problem occurs when the machine is shut off or put to sleep for a long period of time. Because when I shut it off and turn it right back on a few minutes later it works, or if I shut the lid and open it 10-20 min. later everything works fine, it's only when the machine is off or asleep for long periods of time.
So, I do not know what else can be wrong.
Should I try to take out the old RAM and just leave the new module in and see if that works out? See if that specific module is faulty?

I need a monitor power supply for HP2711X. Where can I buy one?

I need a monitor power supply for HP2711X. Where can I buy one?
This question was solved.
View Solution.

Because the XP597A3 (actually any of these product numbers; XP597AA, XP597A3, XP597AS) is a HP 2011x 20" LCD/LED widescreen monitor. The OP was looking for an A/C adapter power supply for the HP 2711x 27" LCD/LED widescreen monitor, which is product # XP600AA or XP600A3. The adapter power supply I linked to, is the correct part for the 2711x monitor.... that is why not those other parts.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

I need a print driver for the HP Color LaserJet 3600 for OS X 10.8.3

Now that I have updated to the newest OS I'm frustrated because neither Hewlett Packard nor Apple has a driver for the printers that I have. So I can't print from my laptop to any of my printers. I just need a driver option for and HP Color LaserJet 3600, Canon MF5900 Series, and a Hewlett Packard CP1518.

Information/possible solution:
Printer Setup
https://discussions.apple.com/message/4367330#4367330
HPIJS for Mac OS X
Gimp - Print

Need 110-240V Power Supply for WRT54G Ver 8.0 12V 0.5A DC

Can anybody sell me a power supply for my WRT54G Ver 8 wireless router?
Need 110-240VAC to 12V 0.5A DC
If you cannot sell me this item, can you recommend an online vendor?
Thanks a lot.

I checked on the wireless routers adapter .. it shows ...
Ac Input 5V 2A Jack Type : BIG BARREL AC Input 110~120V

Need to Replace Power Supply

I have a iMac G5 20" with the built-in iSight. My computer has progressed from having occasional issues to not being able to boot up at all.
It started w/the freezing and the fan kicking in...to grey screens of death...to kernel panics. I tried multiple times to use the disk utilities both from the install disk and from the applications - it found nothing wrong.
I wiped out the hard drive and reinstalled the OS...happiness was brief as it crashed within minutes of restart. Tried this multiple times - it wouldn't even make it through the install sometimes.
Took it to the Apple Store - Genius Bar - the only suggestion was to replace the hard drive. She gave me the cards of some outside techs stating that it would be cheaper since I'm out of warranty anyways.
I bought a new hard drive and with the help of my boyfriend (and a handy YouTube video) we replaced it ourselves. I got as far as again trying to install the OS and was not successful. It will only occasionally boot far enough to get to the disc utility. I was able to format the volume at least.
From what I've read the Power Supply is probably my next stop. I found the part I need (661-3780), but can't figure out WHERE it goes.
Can someone point me in the right direction? Help!!

Look at some of these:
http://www.kodawarisan.com/imacintel/imacintel01.html
http://xlr8yourmac.com/systems/imacisight_internals/imac_g5_isightinside.html
http://nl.youtube.com/watch?v=iVgL9u7ySUk
http://nl.youtube.com/watch?v=fI_QmBueWg4&feature=related
They should help you,

How to install drivers for HP Color Laserjet 1215 and HP Scanjet G2410 on Mavericks?

I recently purchased MacBook Pro and upgraded the OS to Mavericks. I am unable to find drivers for my HP Color Laserjer CP1215 printer and HP Scanjet G2410 scanner which I was using with HP Laptop. Google search yielded instructions at http://foo2zjs.rkkda.com/INSTALL.osx for the HP CP1215 printer. However, the instructions don't seem to be working on Mavericks. So, I am stuck with a printer and scanner which don't work with Mac. Thanks in advance for any help.
Ajit Singh

I don't see either of those models on http://support.apple.com/kb/HT3669. You should probably check with HP to see if they are still supported.
https://discussions.apple.com/message/23611767#23611767

I need help to replace my power supply for the hp pavilion elite m9510f

This computer has given me many problems since I bought it in '09. From graphic card fan issues, a hard drive crash, and now the power supply has failed.
I did the blow dryer trick but it still ends up breaking a week later. I want to know what new power supply should I buy. One that will be able to fit in the hp pavilion elite m9510f and is an upgrade to the 350w that it has. Maybe somthing under 60-70 dollars if possible. Thanks for any help.

It appears to be a normal case and motherboard. A normal ATX supply should work: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=50001333&IsNodeId=1&Description=Computer...
Just an example of what is availble, but most any should work as long the physical dimensions match the one installed now.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

I need guidance in choosing an xterm all portable power supply for iPhone 5 and iPad Air. Can U help?

Traveling intl. Need a rechargeable external power supply. I can't find any restrictions in choice. Need to chg iPad Air and iphone5. Any thing to avoid? Any advantages in specific choices/brands?

DNArizona wrote:
No charger at my seat on the plane..
How many planes routinely stay in the air for the 8-10 hours your battery lasts?

I need help picking the correct power supply for my HP Pavilion a1000

Hello,
I need to replace my power supply on my HP Pavilion a1000. It currently has the original (A Bestec Model: ATX-300-12Z CDR. The HP P/N is 5188-2625.
I found one on ebay that has the same numbers but instead of CDR, it says DDR. I don't really know what that means. The listing is below. Will this work? If not, could you give me a link that would work?
Thanks ahead of time for your help!!
http://www.ebay.com/itm/Not-Noisy-Replacement-PC-Power-Supply-fo-Bestec-ATX-300-12Z-DDR-HP-P-N-5188-...
This question was solved.
View Solution.

jimmycaps wrote:
Hello,
I need to replace my power supply on my HP Pavilion a1000. It currently has the original (A Bestec Model: ATX-300-12Z CDR. The HP P/N is 5188-2625.
I found one on ebay that has the same numbers but instead of CDR, it says DDR. I don't really know what that means. The listing is below. Will this work? If not, could you give me a link that would work?
Thanks ahead of time for your help!!
http://www.ebay.com/itm/Not-Noisy-Replacement-PC-Power-Supply-fo-Bestec-ATX-300-12Z-DDR-HP-P-N-5188-...
Hi,
Yes the PSU will be ok. It's a desktop so you don't have to use exactly the same PSU. It can be even more powerful but make sure there are all compatible connectors. It looks like the CDR version is only 300W and the DDR 400W. The connectors are the same..
http://www.newpowersupply.com/bestec_atx_300_12z_cdr_300w_300w_24_pin_ps2_replacement_power_supply_p...
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Installing uninterruptible power supply for iMac

I'm trying to set up an APC RS 1500 Battery backup for my iMac(2.66 GHz Intel Core 2 Duo), and the APC specs show a stepped sine wave as the on-battery wave shape; is this compatible with incoming line voltage the iMac needs?
Thanks

It is my understanding that most affordable un-interruptible power supplies will be outputting a stepped sine wave when on battery. Considerable energy would be lost in a smoothing filtered output.
Therefore - I do think that you will not have any problem using the aforementioned UPS.

When I boot up my machine, the apple logo comes up and the little pinwheel comes up as if it is loading up. Then another screen comes up stating "you need to restart your computer. Hold down the power button for several seconds...." any thoughts?

I have already tried to start in safe mode. No go. I tried the single mode option as well. Volume ok. I don't have the os x disc. The computer was given to me because they could not fix the problem. Not computer smart. Does anyone have any ideas?

Apple may still supply the original restore CDs/DVDs for a nominal fee. Have your serial number and model information available when you call them. You do not have to be the original owner.
AppleCare Support Phone Number: 1-800-275-2273
open 6am to 6pm Pacific Time
Apple Phone Sales 1-800-692-7753
International Technical Support Numbers
http://www.apple.com/support/contact/phone_contacts.html
"You have to call Apple & likely ask for a Product Specialist to get it (Leopard), if they still have it... helps if you tell them you have a new iPhone (iPad) that needs it!"
BDAqua
Requirements for Mac OS X v10.5
http://support.apple.com/kb/HT3759

I need a replacement power cord for my Sony Xpold boombox

I need a replacement cord for my Sony Xplod Boombox

Let me check for that. What's the complete model number of your Sony Xplod boom box? Please click here to know how to find the model number. Thanks!

I need a replacement power cable for my white macbook - which one do I buy?

Whic power cable do I buy for my white macbook? I need a new cable and I can't go to the apple store to ask...
Thanks

You can get a new third party 60W power adapter on eBay for under $20.
http://www.ebay.com/sch/i.html?_nkw=macbook+power+adapter&_sacat=0&_sop=12&_dmpt =Apple_Laptops&_odkw=macbook+power+adapter&_osacat=111422&_trksid=p3286.c0.m270. l1313
Or for $80 from Apple http://store.apple.com/us/product/MC461LL/A

What caused "You need to restart your computer. Hold down the Power button for several seconds or push the restart button."

This was displayed in four lanuages. When I restarted I was asked to submit an error report. The gave programmer details and indicated my OS 10.4 had quit. I was reading a news article on DailyMail.co.uk at the time.
I ran a Sophos antivirus scan on the whole disk and no threats were identified.
This has apparently happened a couple times previously. I thought the computer had not booted up properly since it had a black box where this message appeared and the machine was unresponsive.
Any suggestsions for cause and/or solution.

Apple won't work on it anymore. And, take it from me (hard experience: three boards changed and the G5 finally croaked from the graphics chip problem) you don't want to bring it to an AASP either, because if they are able to get a new logic board from Apple, it will croak in short time also. These were not refurbed properly. And, by now, the caps on a refurbed board will be ancient, anyway. In addition, there is a serious potential issue with the graphics chip. There was a repair extension in effect for both issues, the caps and the chip, but it's long since gone.
There might also be bad caps in the power supply.
Those three bad caps, and possibly others, are enough to bring this machine down.
There are some delicate soldering skills involved in replacing the caps. Most people with experience recommend practising first on a disposable board.
You can get a set of the caps which will fit properly from
http://jimwarholic.com/2008/07/how-to-repair-apple-imac-g5.php
There's also badcaps, who I think will work on these.
http://www.badcaps.net/
Also have a look at the posts inside these threads from resident expert spudnuty.
https://discussions.apple.com/thread/2287036?threadID=2287036&tstart=0
https://discussions.apple.com/message/11896037?messageID=11896037#11896037
And there are one or two others who will do the repairs. I can't remember right now, but I'll look into it and post here again, probably tomorrow.
Basically, I don't think you want to put any big money into this.
EDIT: just remembered another. There was another one located in Oregon and I think he's now out of business.
http://www.dttservice.com/imacg5.html
Get the caps and maybe have some local guy work on it.
Message was edited by: WZZZ

Need step by step directions to install a replacement Power Supply for a HP Color LaserJet 1215

Similar Messages

Maybe you are looking for