Need to click to get a key listener

Hi. I need to click in some part of the explorer window to make the movie "listen" my keyboard, and i strongly need to get rid of this click, otherwise it doesn't listen the key and stays freeze.
This looks like the old "click to activate", in fact it works exactly like that, but i'd tried with opera, chrome, firefox a even IE and i can't solve this. Also i've tried some old post that use and noClickToActivate.js, but it doesn't work either.
There is some configuration or file someone use and actually works?
Thanks in advance!

Mista, you are correct! thank you so very much!!!!
how about creating pop up windows? I am talking aboutj
voluntary pop ups. when you click on a link.
go to
http://virtualvisitor.com/portfolio.html
and click on the motorcycle link, then click on one of the
motorcycles on that page. this is my QTVR portfolio. when someone
on a PC and using IE has to still click an Active X warning each
and everytime one of my pop up windows comes up, which is so
annoying that I think most will give up trying to see my Quicktime
VR photography.

Similar Messages

My mail does not come in automatically even though i have it set as auto. I need to click on get mail each time

My email does not come in until I click on get mail. I have the check mail set automatically in my preferences under general. What am I doing wrong? Cheers John

OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

Will only shut down manually? What do I need to do to get it back to where it will shut down when I click the shutdown function?

Will only shut down manually? What do I need to do to get it back to where it will shut down when I click the shutdown function?

Boot holding down the command-r keys into the Lion Recovery Disk. Select Disk Utility and run Repair Disk.

With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window. Can I go back to just double clicking ?

With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window. Can I go back to just double clicking ?

Of course. To do it, open a Finder window, go to Finder menu (on the menu bar) > Preferences > General, and untick "Open folders in tabs instead of new windows".

When I click on the 'help' key in the elements 12 program it wants to open it in Firefox2. Firefox doesn't work on my Macbook Pro Air. I use Safari. How do I get it to open?

When I click on the 'help' key in the elements 12 program it wants to open it in Firefox2. Firefox doesn't work on my Macbook Pro Air. I use Safari. How do I get it to open?

Hmm, that is very strange. I agree with MichelB that it's probably best just to get the PDF, but you can try going to your username>library>preferences and deleting:
com.adobe.PhotoshopElements.plist
Adobe Photoshop Elements 12 settings
Adobe Photoshop Elements 12 paths
To see the library, click the Go menu in the Finder and hold down the option key and it will appear below the little house for your user account. While you're in there it wouldn't be a bad idea to go to the Saved Application States folder and delete anything pertaining to PSE.
Repair permissions and see if that does it.

I got an unused Adobe After effects CS6 from an ebay seller.He said the disc was cracked and sent me the 24 digit number key.Do I still need the disc to get the program?And where do i input the 24 digit key?Also do I have to sign up for CC I can't afford

I got an unused Adobe After effects CS6 from an ebay seller.He said the disc was cracked and sent me the 24 digit number key.Do I still need the disc to get the program?And where do i input the 24 digit key?Also do I have to sign up for CC I can't afford that monthly charge.

You can download from the page linked below:
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

When i use Firefox and do a Google search, find what i need and click on the link I keep getting automatically redirected to another search site

When i use Firefox and do a Google search, find what i need and click on the link I keep getting automatically redirected to another search site called http://www.scour.com
Can someone tell me if this is a problem with Google or Mozilla? or both? or neither?

This type of behaviour can be caused by malware. Try running several malware scanners. It is best to run several as each will pick up things that the others miss. Some scanners you can try are:
* [http://www.malwarebytes.org/mbam.php Malwarebytes]
* [http://www.superantispyware.com/ SUPERAntiSpyware]
* [http://www.lavasoft.com/products/ad_aware_free.php Ad-Aware]
* [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx Windows Defender]
* [http://www.safer-networking.org/en/home/index.html Spybot S&D]
This link may help - http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If the above malware scanners do not find any malware or can not clear it, you should consider posting in one of these forums for specialized malware removal help:
* http://forums.spybot.info/
* http://www.spywarewarrior.com/index.php
* http://forum.aumha.org/
* http://www.bleepingcomputer.com/forums/
* http://www.spywareinfoforum.com/

My home button is not very responsive and I have to click it few times to get it to work. What do I need to do to get it fixed?

My home button is not very responsive and I have to click it few times to get it to work. What do I need to do to get it fixed?

TROUBLESHOOTING iPhone Hardware
http://support.apple.com/kb/TS2802
http://support.apple.com/kb/TS1630
The Home button is slow to respond
If the Home button is slow to respond when exiting one application, try another application.
If the issue exists only in certain applications, try removing and reinstalling those applications. For further assistance in installing and troubleshooting applications see this article
If the issue continues, turn iPhone off and back on.
If the issue continues, reset iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds or until the Apple logo appears.
Restore iPhone. Follow the steps the steps in the iPhone Troubleshooting Assistant.

Please help. getting desperate. i cannot set up 3g on my ipad 2. when i go to mobile data in the settings there is no option to view account. which is apprently what i need to click on, any help greatly apprectiated

please help. getting desperate. i cannot set up 3g on my ipad 2. when i go to mobile data in the settings there is no option to view account. which is apprently what i need to click on, any help greatly apprectiated

I got mine (2 weeks ago) 64GB WiFi+3G (Verizon) from the apple store online
I didnt have to do anything to it, turned it on, activated it, got it on my home network then I signed up for the 3G data service, it works where ever I happen to be. (if there is an unknown WiFi connection available it asks me if I want to join before it continues to connect to the 3G when I am surfing or getting e-mail)
do you have an Apple Store close enough to travel to?
I am only assuming here, but since you have a SIM you are not in the US correct?

In safari, on a web page if you need to double click to get into an entry box, how do you do it?

In safari, on a web page if you need to double click to get into an entry box, how do you do it?

Yes, there seem to be big problems in this area in Safari.
Report the problem to Apple at http://www.apple.com/feedback/iphone.html

When i start firefox 4.0, i get a javascript application box coming up saying "TypeError: Components.classes[cid] is undefined" then i need to click ok to start firefox. Whats going on??????

When i start firefox 4.0, i get a javascript application box coming up saying "TypeError: Components.classes[cid] is undefined" then i need to click ok to start firefox. Once okay is clicked, firefox starts immediately.

This issue can be caused by an extension that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

When I open an email, instead of the site opening I get a long web string that I need to click. Is used to open automatically when I opened the email. How can I go back to that?

When a message comes in from a site such as Amazon or Shutterfly the site itself does not open when the email is opened. I need to click on a long web string to open the message. It all used to appear when the email was opened. How can I make that happen again? It seems an unnecessary step otherwise.

I don't appear to have a toolbar either.

Custom abap iview need to double click to get in to the right page

Hi experts,
I create custom Abap Webdynpro Iview,
but it has to double click to get into the service.
If we only do one click then it got internet error.
how to solve this?
thanks in advance

Hi,
sorry for lack of information.
the error is "the webpage cannot be found"
http 404. (This error (HTTP 404 Not Found) means that Internet Explorer was able to connect to the website, but the page you wanted was not found. It's possible that the webpage is temporarily unavailable. Alternatively, the website might have changed or removed the webpage)
but, when I click the link page again (for second time), it will link to the right page.
is there any missing configuration?
thanks

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on get info . What am I suppose to change in the setting on getinf

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How to get the key values of record in ADF Read-only Form?

Hi
I am using ADF Business Component VO.
I have a search page( ADF Search Form) and I am displaying the results of the search in a ADF Read-Only Table( only few columns are shown) .Then by selecting a record and clicking on the button 'View' , I am navigating to a different page(ADF Read-Only Form) to show all the columns of the table for the selected record.
In the second page, I have one more button 'view child details'.Now when I click on this view child details button, I have to show another page(ADF Read-Only Form) which fetches the data from one of the child tables of parent record.
My idea is to create a ViewLink between the parent and child tables.( I have more than 15 child tables for a parent table).
Is there anyother way to achieve this functionality?
Please respond ASAP.
Thanks in advance.
~Sivaji..
Message was edited by:
Sivaji...the boss

Sijav,
ASAP?
Anyway - yes, you can do this with a view link. When you add the child table to the application model, make sure you actually add it as a child of the parent table instance (select the parent VO first, then use the shuttle to add it). This way, the parent->child relationship should be coordinated for you automatically. You should not need to get the key values manually.
Then, when you create the page to show the detail table, make sure you use the child table that is shown as a child of the parent table in the data control palette (expand parent table to see the child).
Hope this helps,
John

Need to click to get a key listener

Similar Messages

Maybe you are looking for