Need to Create a 4 step sequencer

I just purchased the USB 6341 DAQ card. I am using Dev1/.Port1 to control 4 driver transistors. The transistors fire 4 SSR. I am trying to create a sequence for the 4 transistors. Sometimes a test unit that is driven by a SSR will fail. So I have to change the sequence for the failed DUT. I will have one less DUT to test.
Basically each SSR will be ON for 6 seconds. There will be a delay of about 5.75 seconds for the next valve to fire. The delay is used to balance the pressure testing. The second valve will need to start at 5.75 seconds later. Basically the two valves must cross at the 50 % turn OFF. How can I perform this task. There are at least 7 different test sequences??
Thanks,
Philip

hello,
in a first time you can have a look on how to use state machine
which is base of sequencer
http://zone.ni.com/devzone/cda/tut/p/id/3024
regards
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte

Similar Messages

Create a stair step function

I need to create a stair step analog function to control a galvonometer. I am trying to scan a small chip with a laser. I have one galvo to move side to side and one to move down the chip. I currently use a triangle wave on a rising slope but this causes the system to zig-zag across the chip. I would much rather have the side to side galvo scan straight across the chip.

Hello Landauer,
Could you please elaborate as to how you are using the PCI-6229 to achieve this and why it is a problem to have the "side to side galvanometer" scan straight across the chip.
Thank you,
Raajit Lall
Applications Engineer
National Instruments
Raajit L
National Instruments

Help needed to create Quik Time VR movies, step by step

Hello,
thank you for your attenction.
I need to create Quick time vr movies, and I need to know the exact sequance of steeps to do it, and if the starting point I use is correct.
1) I shooted a sequence of photos with my digital camera (for example: www.stebianchi.com/quicktimevrhelp/still-photo.jpg).
2) Then, with photoshop (CS4) I choose: Automate/photomerge and I select all them to joint them in a bigger 360° panoramic one (www.stebianchi.com/quicktimevrhelp/pan.jpg). If, untill here, all is correct, the first question: in photoshop Photomerge layout option, do I have to choose one voice "auto, perspective, cylindrical, spherical, etc..." rather than anoter one of these?
3) from here, I really need your help.
First of all: the great doubt:
My photos can not cover a spherical panorama, they're only a "ring" around a center (and not a spherical texture). To cover all the surface (or almost all, ok...) of my ambient, do I have to use a wider lens on my camera or there is a different solution (for ex a vertical photomerge?).
4) Done this, I think I shuold buy a software like Cubic converter, to set and export the QTVR movie. Right?
Thanks a lot guys,
all the best!
Stefano

You can call your local apple store(find one on the home page of apple.com) and they will give you instructions how to convert DVD to iPod. That is what they told me, but from what I heard, you may need more than Quicktime Pro. Just call and ask them, because if you make a manual of how to do it, it could help me a lot.
(I'm looking for a good DVD converter, already know some, beside the internet download ones)

I need to create an animation sequence in photoshop cs6 longer than 5 seconds

I need to create an animation sequence in photoshop cs6 longer than 5 seconds. please help.

What problem are you having that should be easy just create the layer to make frames with. Create a frame animation in the timeline panel. Create the frames and set their display time. Save an animated gif for the web ie "Save For Web"
Prior to CS6 Photoshop only had a Animation Palette in CS Adobe replaced the palette with the Timeline Palette that can do Frame animations and Video. You can render a fame animation as a video but video does not support transparency like and animated Gif.

How to setup Compressor to create video from multiple sequences within FCP?

I am wondering how I can set compressor up to create videos from multiple sequences within FCP. When I click file -> export - > compressor for a sequence and go into the program, it doesn't allow me to go back into FCP. I just get a spinning beach ball. Is there no way to set it up so I can prep a bunch of fcp sequences within compressor and then click submit and walk away? I have over 100 sequences that need to be exported so it would be a little difficult to do this one at a time. Thanks.

Batch processing
*Step one. Make sure everything in every sequence is rendered.*
*Step two. Make a folder somewhere and name it something relevant.*
*Step three. In FCP select all you sequences that you want to compress and right click (option), choose Batch Export from the contextual menu.*
*Step three point one. In the batch export window click on settings and choose the folder you made in step two for the destination. Make sure Make Self-Contained is not check and include Audio and Video.*
*Step four. Click export in the batch window.*
Once that is done you can close FCP.
Now in Compressor
*Step five. Make a setting that will give you the output that you want (mpeg2, AC3, h.264, whatever). Make a destination for where you want to save the output.*
*Step six. Make a droplet from the settings you made in step five.*
You can quit Compressor now.
*Step seven. Take the files that you batch exported from FCP in step three and four and drop them on the droplet you made in step six.*
o| TOnyTOny |o

Is there a step sequencer for drum patterns in logic express?

I was wondering is there a step sequencer for doing drum beats in logic express? It would be much easier if there were, that way I wouldn't have to record it and then try and fix my beat in the matrix editor. I believe that there is a step sequencer included with ultrabeat but I know that that is only with logic pro.

The latest issue of Sound on Sound covers how to do this with the Hyper Editor.
http://www.soundonsound.com/sos/mar06/articles/logictech.htm
That link will only work if you're a subscriber, until SOS declassifies it for everyone in six months.
The GM method will work for something that's GM compatible, and you can use this method to create your own custom version for any other drum instrument you want. It's pretty sweet. The gist of it is you create a mapped instrument in the environment, cable it to your audio instrument of interest, rename the notes to whatever drum/percussion sound they match (if needed), create a MIDI region with one note each, then make a hyper set out of it.
It seems like a lot of steps, but it's pretty simple once you've done it once, and you end up with a very flexible step sequencer-like editor. You can repeat these steps to make editors that are customized for any instrument plugin you like.

How do I move all my files from one User Profile (account) into another? I needed to create a new account and want all of my files accessible in the new one.

How do I move all my files from one User Profile (account) into another?
I needed to create a new account and want all of my files accessible in the new one.

ok, what you're learning right now is 101 unix, which is good. Unix is a good thing
now: the way unix works, and macos (which uses unix underneath) the files and folders work like a hierarchy.
the start of that tree is /
so, if you were to do:
cd /
(cd means change directory)
it will bring you at the highest branch of the file system.
cd /Users
will bring you to where all the users are.
to see whats in /Users you can use your friend ls command
ls means list files/directories
so:
cd /Users
ls -la
(the -la here means show all (even hidden) and long format (very verbose)) this flag is very optional.
you will see
fred
user2
for example.
if you want to see the desktop of user2 you would change directory to it then list the files.
for example:
cd /Users/user2/Desktop
Note that the files and directory are case sensitive, so, desktop is NOT the same as Desktop, or DESKTOP
ls -la
you should then be able to see everything in users2 desktop
you could have done as well the same thing in smaller steps, for example:
cd /
cd Users
cd user2
cd Desktop
this is the equivalent of cd /Users/user2/Desktop
So, for your file, i don't know where it was, but know that if you log in as user2, it will directly put you in
/Users/user2
which most likely the file you had created from the other user was in /Users/user1
if you copied all the files from /Users/original_user to /Users/secondUser
most likely yes, all your mail, bookmarks etc would be copied over.
so in your case.
sudo chown -R seconduser:staff /Users/secondUser
should work
Remember that if you start a path with the character / it means start from the root of the file system, at the highest top you can ever get.
so
cd /Users/fred
is not the same as
cd Users/fred
unless you were in / already
i know it may be confusing at first but it's actually very logical if you play with it.
to simplify, think of it that / means C:\ on windows
you can't go any higher than C:\ (in a way)
if you're unsure which directory you're currently in, you can always type:
pwd
it will tell you where you are.
for example:
cd /
pwd
this shows /
cd Users
pwd
this now shows /Users
cd /System/Library
pwd will show /System/Library
cd /
cd /Users
cd fred
cd Library
pwd will show /Users/fred/Library
unix can look very scary but it's actually vital and very necessary to do tasks sometimes that would take for ever to do via the windows. This is good learning.
so for the myfile you had created, i can't tell you where it is, at the time you created, if you can do a pwd command you'll know the path,
ls -la (this shows all the files where you are)
if you see myfile in the list
do a pwd
whatever is return, the real location of the file would be:
whatever pwd returned / myfile
I hope that makes sense.

I need to create a ghost image of my G4 iBook (OSX 10.3.9) and replace the OS9 on my G4 tower with the created iBook ghost image. How do you do this?

I need to create a ghost image of my G4 iBook (OSX 10.3.9) and replace OS9 on a G4 tower with the Ghost image. How do you do this? Will my applications still work?
The iBook is running Pather, i have tons of programs i use on it, project files, etc... and my G4 Mac tower is more powerful, faster, and more reliable than the iBook. I basiclly just want to take the entire OS, programs and files... create an image, and drop the image on the G4 Tower so it basically will function just like the iBook. Like a mirror image of everything that is on the iBook. I know that you can create image files in the Disk Utility on Panther, but will that back up the entire OS with settings, programs, files and all? ive never done anything like this before, so i wanted to post this up to see if i would get an answer. In the meantime, im reading "Mac OS X, Help Desk Essentials By Owen Linzmayer" to see if i can find the steps to do this.
Any help would be greatly apprciated. Much thanks!

Can't be done as an exact copy from one Mac to the other. The operating systems are system specific. First make sure your system doesn't need a firmware update to get 10.2 or later on it. You'll need to install 9 on it if it does, direct from a 9 retail CD that is compatible with it *. This disc can't say Upgrade, Dropin, or OEM. To determine compatibility, identify your G4 tower:
http://support.apple.com/kb/HT3082
http://docs.info.apple.com/article.html?artnum=42739
Then look at the OS 9 compatibility:
http://docs.info.apple.com/article.html?artnum=25517
Then apply the correct update
http://docs.info.apple.com/article.html?artnum=86117
The last Mac OS 9 to come retail is 9.2.1, and that's newer than 9.0.4, 9.0.2, and 9.1.
Your ghost image can be done using cloning software, but then you'll have to use a retail 10.3 installer and 10.3.9 combo update on the G4 tower. Then use the Migration Assistant to import the data from the clone of the iBook. The 10.3 retail disc looks like * and does not say upgrade, dropin, or OEM. The 10.3.9 combo update is here:
http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
The clone to an external hard drive can be done with these instructions*:
http://www.macmaps.com/backup.html The import of the external hard drive with the migration assistant can be done with these instructions:
http://docs.info.apple.com/article.html?artnum=25773

UCCX 8 - Dramatic change in the Create File Document step that is used by the Create XML Document step in order to read an XML file

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
For the last 5 years (and in IPCC3.x/4.x,UCCX/5.x/7.x) I've used the same basic subflow to read a XML document that contains holiday dates where the queue should be closed. I've re-used this script on 20+ client installs and it's always worked. The structure of the script allows you to pass the path and filename of the XML document as parameters to the subflow. (The document is in the repository)
I loaded this script in UCCX 8.0.2 recently and it crashed with a Java.IO error. It looked like it was trying to read the file system directly and not the repository. (In the Linux appliance model this kind of makes sense but why is the step trying to read the file system directly?)
So I open a TAC case (SR# 615243125) and TAC tells me that the method of using the Create File Document step is not supported anymore and that I should specify the filename directly in the Create XML Document step
The problem that I see (aside from having to edit all my scripts that use XML files) is that the Create XML Document step is looking for the input to be a type DOCUMENT and not a type STRING. This seems to imply that I have to hardcode the document in each script that I deploy for a customer. When it was a string it was easy to construct the full file path from parameters and pass to the subflow.
Questions to the group
#1 Am I missing something here?
#2 Do you assume that you'll be able to load a script that worked fine in UCCX 7 into UCCX 8 and that it should completely function when you're doing everything according to the step reference documentation.
#3 Cisco didn’t document this in any way that I can find.
#4 How can you use the Create XML Document step in a fashion that would let you construct the path of the file and the filename previously in the script so you could pass it to a subflow ? It would seem this functionality has been killed in UCCX 8
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
(Background)
Create File Document Step
The input filename is a STRING, could be an explicit path and filename in the repository or a variable that represents that path and string
The output of this step is a DOCUMENT to be used in the Create XML Document step
The string FILE_FullPathHolidayFiles references en_us\folderName\documentName.xml
The document was properly uploaded into the repository only, NOT trying to directly read c:\foo\blah…
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The create XML document input can only be a type DOCUMENT

#1 Am I missing something here?
You are mixing two different issues together here.
The Create File Document step is indeed not needed or supported for creating an XML document. That is why there is a unique step; to trigger XML parsing within the MIVR subsystem.
Accessing the file system is restricted to a single folder within the VOS model (i.e. 8.0+). This folder is not backed up, replicated, or cleaned up automatically. It was intended to give developers some FS access as a temporary swap location only.
#2 Do you assume that you'll be able to load a script that
worked fine in UCCX 7 into UCCX 8 and that it should completely
function when you're doing everything according to the step reference
documentation.
Assume nothing; read the documentation and attend one of the dozens of partner training sessions that CCBU put on advising of the upcoming changes.
#3 Cisco didn’t document this in any way that I can find.
You're right, I guess, on the Create File vs. XML Document step. AFAIK Cisco never wrote a notice into the Step Reference Guide explicitly stating that you cannot use the Create File Document although the documentation seemed pretty clear to me without it. File system restrictions are documented in the 8.0 release notes.
Scripting and Development Series: Volume 2, Editor Step ReferenceUse the Create XML Document step to create a logical document that maps a document to another document variable (where the document has already been pre-parsed as an XML document and is ready to be accessed by the Get XML Document Data step).Use this step before the Get XML Document Data step to obtain data from a document formatted using the Extensible Markup Language (XML).
#4 How can you use the Create XML Document step in a fashion that would
let you construct the path of the file and the filename previously in
the script so you could pass it to a subflow ? It would seem this functionality has been killed in UCCX 8
No it hasn't; just concatinate a string to build the Source Document parameter the step needs. Example: "DOC[" + myFilePath + "]"

Help need in creating DB objects programatically .

Hi All,
I have a case where i need to create a table in DB from ADF and need to insert/modify/delete their records in java code.
Is that possible to create an update-able view object from java code rather going with conventional declarative steps in ADF?
Regards,
Suresh kumar.k

ADF BC runtime doesn't give you any feature out for the box for creating DB objects, you may need to use standard JDBC API+ DDL. (btw, there may be design time API used by JDev for DB synch . however I'm not sure about the feasibility of using the same in your context) Next step may be building programmatic EO/VO. You can refer this blog post for the same - http://jobinesh.blogspot.com/2010/06/model-driven-approach-for-building.html

Help needed for creating new component in web ui

hi experts,
i need documentation on the component workbench. i need to cretae a new assignment block in web UI, similar ti the items assignemnt block in opportunity screen.
Where can i find material to learn how to develop new components using component workbench?
Thanks,
Shantanu.

Hi Shantanu,
In fact, you need to create a context node. You can create this context node using the wizard. Click with right button in "Context node" of the view and follow the steps.
Best regards,
Caíque Escaler

Do I need to create partition on msata before factory/recovery install?

I am trying to use the recovery media to install the factory settings W7 to a newly installed Intel 310.
I have installed the 310, and it is definitely there and recognized by the computer. I have removed my HDD and plugged in a DVD drive. Also on hand are the successfully created recovery media (1 CD + 3 DVDs).
I put in the CD and boot via the DVD drive. The Windows screen comes on and then it goes to R&R. From there, I cannot for the life of me figure how how to start the ball rolling on installing W7 to the msata drive.
The two options presented appear to be to install a previous recovery backup, and none are listed. Or to recover from an image, which then takes me to a screen that does not seem to identify an image no matter which of the four recover discs I put in.
Is there any Lenovo page that shows step by step to re-installing recovery media from disk? I'm not a complete newb so this is frustrating.
My only guess perhaps is that I need to create a partition on msata before starting the factory recovery. Not sure why that would be the case in that the factory recovery probably has utilities built in to do so, but I can't think of anything else.
Thanks for any help.

Tried it again. Didn't work. But it's now clear to me that Lenovo R&R is failing to recognize the recovery disk that it created earlier today. R&R said the recovery media was successfully created, but I guess not.
I will try installing from a Win7 installation disc. Thanks for your help.

Need to create Customer to multiple sites record in one run.

Hi all,
we have one table called (e.g.) Prospect. To this table we can associate three different sites: one the legal
site, one admin and one for logistic. All the three sites refer to the main Prospect table via the Prospect_id
and related info are all saved into the same Site_all table (the site type is not stored directly into the site_all
table but via a use_site_all table, similarly to what happens with some standard OApps tables).
We need to create the Prospect and associated three sites via an OA Framework page (actually multiple steps).
So to visually resume:
_ Site1 ---- use:legal
Prospect - Site2 -- use:admin
- Site3 --- use:logistic
What's the best approach to achieve the creation of the records in the tables ?
a) to add three EO for the Site table (with related AO) and one big ProspectAllVO view object containing all the fields
from the three EO ?
b) to add just one EO for the site and reference it three times while defiing the ProspectAllVO ?
c) to specify a View Link (but this should be done three times and I'm not sure how to synchronize and manage
the transaction for the creation ?
d) AOB ?
Thanks in advance. Regards.
Giuseppe Naldi

is it really just one IDOC?
I have never seen that SAP just does a part of one IDOC.
the structure of DEBMAS ist like this:
E1KNA1M
--E1KNVVM
E1KNVPM
E1KNVDM
E1KNVIM
--E1KNB1M
which means for your example it should be like this
E1KNA1M
--E1KNVVM
E1KNVPM
E1KNVDM
E1KNVIM
--E1KNVVM
E1KNVPM
E1KNVDM
E1KNVIM
--E1KNB1M
and in this case I am very certain that it would never just process and create the part for one sales area.
Maybe your customer already exists from ealier tests with just one sales area.
Display your IDOC in WE02 or WE05 and make sure you have a value in name1 field

Can I create a RAW image Sequence in Photoshop CS6?

Hello Photoshop Gurus,
I'm posting this because I've tried searching for an answer but I've only found one and it doesn't work for me. I'm trying to create a RAW image sequence in Photoshop CS6 on a mac. the box is greyed out. The only answer I've found is to disable jpeg support in preferences but that didn't work.
Just trying to create a timelapse from an image sequence without having to spend $20/month renting After Effects!
Thanks!

Do you have the Extended version of photoshop cs6?
(not sure if you need the extended version or not)
more info:
Photoshop Help | Importing video files and image sequences
It might be that you need to convert the images to another file format such as tif.

Need to create sale order from the flat file & mail has to be sent

Hi Experts,
I have a requirement to create a sale order from a flat file and once the oder is created, mail has to be sent to customer as well as to internal user with the order details. I want to know how this process can be implemented and what adapters are needed to execute this.
it would be very helpful, if i get an step-by-step procedure.
Points assured for any helpful answers.
Thanks in Advance
Jai

HI Jai,
You need to create two interfaces as file will be sending the Sales oreder details that you need to capture in IDOC or RFC and then have to trigger to create the sales order. For this Standard BAPIs are also available.
These RFC or BAPIs will response with Sales order details that you need to divert to Mail adapter with the use of BPM and also have to go for Async to Sync bridge.
File -
>XI (BPM) ---> BAPI/RFC (Request)
MailAdapter <- XI (BPM) <--- BAPI/RFC (Response)
For this refer below links for step by step
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
If you will use IDOC then In IDOC inbound processing you need to trigger for Sales order creation and then have to send the Sales Order generated IDOC as an Outbound to Mail Adapter
Flat file -
> XI ---> IDOC
IDOC -
> XI ---> Mail
This will be bit easy scenario to develope as compare to using BAPI with BPM
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
configuring IDOC-XI-Mail scenario using following web-log:
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
Thanks
Swarup

Need to Create a 4 step sequencer

Similar Messages

Maybe you are looking for