Need to eliminate the Zero values in the marker text in Bar chart

Hi all,
I have a requrement where i have to show the values in the BAR chart . so i have used the following syntax,
<MarkerText visible="true" markerTextPlace="MTP_TOP"/>
but the condition is i have to eliminate the zero value. i.e when the value is zero it should not be shown.
Kindly pelase help me to solve this.
Many thanks in advance,
Regards,
Dhaya.

Hi all,
I found the solution .
below is wat i did.
i have created a variable and inside the group, i ahev assigned and i will check for the conidion whether it is zero or not. if it is Zero then i will display null .
<RowData>
<xsl:for-each-group select=".//SALARY_SCALE" group-by="SALGRADE" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:sort select="SALGRADE"/>
<xsl:variable name="Fcnt" > <xsl:value-of select="sum(current-group()[GENDER='Female']/COUNT) div $total * 100 "/> </xsl:variable>
<Cell><xsl:value-of select="xdoxslt:ifelse($Fcnt=0,'',$Fcnt)"/></Cell>
</xsl:for-each-group>
</RowData>
Regards,
Dhaya.

Similar Messages

Decrease the size of a series marker on a bar chart

I am trying to decrease the size of a square series marker on a bar chart in crystal reports.
Usually this can be achieved through the 'appearance' tab in the 'chart options' menu.
However as I have changed one of the series(bar) on the graph into a line, this no longer seems possible.
Is there a way around this?
Thanks

Hi Natalie
In order to decrease the size of a square series marker after changing the series into line, you can use Format Series Marker -> Border -> Thickness.
Hope this helps!
Regards
Poonam Thorat

Need to get the selected values from the selectManyShuttle

Hi,
I am using ADF11g newer version.
I have a selectManyShuttle and a command button. Need to insert all the selected values on the right hand side of the selectManyShuttle into a database table.
I created the selectManyShuttle with the values. Need help in getting the values on the right hand side.
<af:selectManyShuttle value="#{bindings.UserMgmtVO1.inputValue}"
id="sms2">
<f:selectItems value="#{bindings.UserMgmtVO1.items}"
id="si6"/>
</af:selectManyShuttle>
Any sample code or link is really appreicated.
Thanks

Thanks for the reply.
I am using a View Object and I dropped it as SelectManyShuttle
<af:selectManyShuttle value="#{bindings.UserMgmtVO1.inputValue}"
id="sms2"
valueChangeListener="#{POBacking.getSelectedValues}"
valuePassThru="true"
autoSubmit="true">
<f:selectItems value="#{bindings.UserMgmtVO1.items}"
id="si6"/>
</af:selectManyShuttle>
public void getSelectedValues(ValueChangeEvent valueChangeEvent) {
System.out.println("Testing Shuttle");
ArrayList list = new ArrayList(Arrays.asList(valueChangeEvent.getNewValue()));
String val = "";
String sqlStmt = "";
try {
if (list != null) {
for (int i = 0; i < list.size(); i++) {
int l = list.size() - 1;
val = list.get(l).toString(); //returns , delimited string
System.out.println(" value:" + val);
if (val != null) {
val = val.replaceAll("[\\[\\]]", ""); //remove []
StringTokenizer st = new StringTokenizer(val, ",");
int nto = st.countTokens();
for (int j = 0; j < nto; j++) {
String users = st.nextToken().trim();
System.out.println("Users:" + users);
//sqlStmt = " update xxpp_project_clip set clip_status='true', clip_seq = "+j * 10+
// " where project_id = "+rHdr.getAttribute("ProjectId") +
// " and clip_name ='"+ clip_Name +"'";
//System.out.println("sqlStmt:" + sqlStmt);
//stmt.executeUpdate(sqlStmt);
//am.getDBTransaction().commit();
//if (stmt != null)
// stmt.close();
// am.getDBTransaction().commit();
} catch (Exception ex) {
ex.printStackTrace();
I don't see the values in the list.
I gets printed as
value:[Ljava.lang.Integer;@1b10691
Users:Ljava.lang.Integer;@1b10691
how to get the individual values in the list?
Thanks
Saru

Zero values in the database

Dear BPC Experts,
I am getting incorrect results when running SPRUNCONSO. It seems that the error is due to zero values that are in the database. Would you know how i am getting zero values in the FACT tables? What should i do to prevent this situation in the future?
Best regards,
Grace

Hi!
Thanks for your comments/inputs. I am getting wrong amounts in the calculation of minority interest expense, equity in net earnings and investments. However, only a few entities are affected.
Minority interest expense = PMIN * Net Profit >>> Using the data in BPC, i dont get the correct results for some entities.
System was calculation correctly in the previous month.
Any idea what is causing this wrong calculation?
Thanks and regards,
grace

Iam using a table in numbers to plot daily graph lines. If I fill a cell with a text box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is tho

I am using a table in Numbers to plot daily graph lines. Mood swings of how I am on the day, i"m a depressive.
If I fill a cell with a step box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is there a work around. so thatbgraph only plots on the day?

The answer is (sort of) in your subject, but edited out of the problem statement in the body of your message.
When you use a stepper or a slider, the value in the cell is always numeric, and is always placed on the chart if that cell is included in the range graphed by the chart.
But if you use a pop-up menu cell, you can specify numeric or text values in the list of choices for in the menu. Numeric values will be shown on the chart. Text values will not.
For the example, the values list for the pop-up menu was:
5
3
1
Choose
-1
-3
-5
The first pop-up was set to display Choose, then the cell was filled down the rest of the column. Any text value (including a single space, if you want the cell to appear blank) may be used instead of Choose.
For charts with negative Y values, the X axis will not automatically appear at Y=0. If your value set will include negative values, I would suggest setting the Y axis maximum and minimum to the maximum and minimum values on your menu list, rather than letting Numbers decide what range to include on the chart. Place a line shape across the chart at the zero level, and choose to NOT show the X axis.
Regards,
Barry

Intrastat - The statistical value of the document is zero - how to update?

Dear gurus,
I have a problem in Intrastat and maybe you can help me.
When running VE01, I have incomplete billing documents with the message EIP020 'The statistical value of the document item is zero'.
How can I update these billing documents? How can I prevent it from happenning in the future?
Thank you in advance for your help

Please.....anybody knows the answer for this issue?

Need help Take out the null values from the ResultSet and Create a XML file

hi,
I wrote something which connects to Database and gets the ResultSet. From that ResultSet I am creating
a XML file. IN my program these are the main two classes Frame1 and ResultSetToXML. ResultSetToXML which
takes ResultSet & Boolean value in its constructor. I am passing the ResultSet and Boolean value
from Frame1 class. I am passing the boolean value to get the null values from the ResultSet and then add those
null values to XML File. When i run the program it works alright and adds the null and not null values to
the file. But when i pass the boolean value to take out the null values it would not take it out and adds
the null and not null values.
Please look at the code i am posing. I am showing step by step where its not adding the null values.
Any help is always appreciated.
Thanks in advance.
============================================================================
Frame1 Class
============
public class Frame1 extends JFrame{
private JPanel contentPane;
private XQuery xQuery1 = new XQuery();
private XYLayout xYLayout1 = new XYLayout();
public Document doc;
private JButton jButton2 = new JButton();
private Connection con;
private Statement stmt;
private ResultSetToXML rstx;
//Construct the frame
public Frame1() {
enableEvents(AWTEvent.WINDOW_EVENT_MASK);
try {
jbInit();
catch(Exception e) {
e.printStackTrace();
//Component initialization
private void jbInit() throws Exception {
//setIconImage(Toolkit.getDefaultToolkit().createImage(Frame1.class.getResource("[Your Icon]")));
contentPane = (JPanel) this.getContentPane();
xQuery1.setSql("");
xQuery1.setUrl("jdbc:odbc:SCANODBC");
xQuery1.setUserName("SYSDBA");
xQuery1.setPassword("masterkey");
xQuery1.setDriver("sun.jdbc.odbc.JdbcOdbcDriver");
contentPane.setLayout(xYLayout1);
this.setSize(new Dimension(400, 300));
this.setTitle("Frame Title");
xQuery1.setSql("Select * from Pinfo where pid=2 or pid=4");
jButton2.setText("Get XML from DB");
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
catch(java.lang.ClassNotFoundException ex) {
System.err.print("ClassNotFoundException: ");
System.err.println(ex.getMessage());
try {
con = DriverManager.getConnection("jdbc:odbc:SCANODBC","SYSDBA", "masterkey");
stmt = con.createStatement();
catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
jButton2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e) {
jButton2_actionPerformed(e);
contentPane.add(jButton2, new XYConstraints(126, 113, -1, -1));
//Overridden so we can exit when window is closed
protected void processWindowEvent(WindowEvent e) {
super.processWindowEvent(e);
if (e.getID() == WindowEvent.WINDOW_CLOSING) {
System.exit(0);
void jButton2_actionPerformed(ActionEvent e) {
try{
OutputStream out;
XMLOutputter outputter;
Element root;
org.jdom.Document doc;
root = new Element("PINFO");
String query = "SELECT * FROM PINFO WHERE PID=2 OR PID=4";
ResultSet rs = stmt.executeQuery(query);
/*===========This is where i am passing the ResultSet and boolean=======
===========value to either add the null or not null values in the file======*/
rstx = new ResultSetToXML(rs,true);
} //end of try
catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
======================================================================================
ResultSetToXML class
====================
public class ResultSetToXML {
private OutputStream out;
private Element root;
private XMLOutputter outputter;
private Document doc;
// Constructor
public ResultSetToXML(ResultSet rs, boolean checkifnull){
try{
String tagname="";
String tagvalue="";
root = new Element("pinfo");
while (rs.next()){
Element users = new Element("Record");
for(int i=1;i<=rs.getMetaData().getColumnCount(); ++i){
tagname= rs.getMetaData().getColumnName(i);
tagvalue=rs.getString(i);
System.out.println(tagname);
System.out.println(tagvalue);
/*============if the boolean value is false it adds the null and not
null value to the file =====================*/
/*============else it checks if the value is null or the length is
less than 0 and does the else clause in the if(checkifnull)===*/
if(checkifnull){
if((tagvalue == null) || tagvalue.length() < 0 ){
users.addContent((new Element(tagname).setText(tagvalue)));
else{
users.addContent((new Element(tagname).setText(tagvalue)));
else{
users.addContent((new Element(tagname).setText(tagvalue)));
root.addContent(users);
out=new FileOutputStream("c:/XMLFile.xml");
doc = new Document(root);
outputter = new XMLOutputter();
outputter.output(doc,out);
catch(IOException ioe){
System.out.println(ioe);
catch(SQLException sqle){

Can someone please help me with this problem
Thanks.

How can i get the all values from the Property file to Hashtable?

how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............

The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is);

How to update the table value in the valuechange event?

I have an input field in the datatable with the valueChangeListener
<rich:dataTable id="cart" value="#{cart.cartList}" var="item">
<h:inputText value="#{item.cost}" id="qty" valueChangeListener="#{items.updateCost}" onchange="submit()">
<h:outputText value="#{item.errorMsg}"> </h:outputText>
in the backing bean
     Item item = (Item) model.getRowData();
// do some update, if the cost too larger, change to max_cost
     item.setCost(max_cost);
     item.setErrorMsg("Error Msg");
After calling the valuechange method, the screen output doesn't update the cost.
How to update the table value in the valuechange event?

As you're misusing the valueChangeListener to set another input field, you need to skip the update model values phase. Otherwise the value set in the valueChangeListener will be overridden by the submitted value. You can do this by calling the FacesContext#renderResponse() inside the valueChangeListener method. This will shift the current phase immediately to the render response phase, hereby skipping the update model values and invoke application phases.

Format the total value in the column of the graph table

Hello all,
I have a graph table and I need to format the total value in the column of the table.
I am trying to find my table bean with the code below but it's not working in the processRequest. Is there anything else that should be done?
// Get the graph
OAGraphTableBean graphBean = (OAGraphTableBean)webBean.findChildRecursive("MyGraph");
// Get the table
OATableBean tblBean = (OATableBean)graphBean.findChildRecursive("MyTable");
The tblBean is null in the processRequest. In the processFormRequest the tblBean is not null.
Thanks and Regards,
Andrea

Hi,
The code OAGraphTableBean graphBean = (OAGraphTableBean)webBean.findChildRecursive("MyTable"); does not work because in this case I am getting the table but casting to a graph.
The MyTable bean is a child of MyGraph.
When creating a graph bean we have the option to create a table as a child (select your graphTable region in the Structure pane, and choose New > tabularFormat - to create the table).
The table bean child I can get just in the processFormRequest, but the graph I can get in both processRequest and processFormRequest.
I need to get the table bean in the processRequest to format the total value column.
Do you know if is there anything else that should be done to format the total column?
Thanks and Regards,
Andrea

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

How to use the prompted value in the filter expression

Hi
Is it possible to use the prompted value in the filter expression?
My requirement is that user will be prompted for a date field and I need to filter the records such that the records are displayed for the last 5 weeks from the date entered by the user.
If somehow I know how to use the prompted value in the filter expression then this requirement is easy to be done. If this is possible, please guide me?
If there are other ways to acheive the desired results then please suggest.
Thanks
-Jaz

Edit: example added
SQL> create table tb_test
2 ( id number(5)
3 , tot number(5)
4 , mon_tot number generated always as (tot*15) virtual
5 );
Table created.
SQL> insert into tb_test (id, tot) values (1, 5);
1 row created.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1          5         75
1 row selected.
SQL> update tb_test
2 set    tot = 15
3 where id = 1;
1 row updated.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1         15        225
1 row selected.

Freight Calculation based on the net value of the Line item

Hi SAP Gurus,
I have one requirement for Freight calculation(Sales order is created through an IDOC) :
In the idoc,we will receive a freight dollar amount - which will be the total amount of freight.(example 100)
We will also receive sales dollar for each line item ,which is then passed to the pricing procedure, for a total amount of sales for that Sales order.
(examples below, for a total of 1500)
The 100 is to be posted to a freight G/L account.
The 100 is further divided by each profit center of the materials on the Sales order.
The freight is split out amongst the profit center , based on the net value of the line item.
Freight value to be allocated = Line item value/total value of the sales order * Freight amount.
Total of the sales order =1500
     Line item value     Freight value calculation     Profit center
Material A:      800          800/1500*100 = 53     Profit center A
Material B:     500          500/1500*100 = 33     Profit center B
Material C:      200          200/1500*100 = 13     Profit center C
Please let me know how to achieve this functionality in pricing procedure or what changes i need to make in Freight condition type.
Thanks in advance,
Bhakar Saha

Were you able to resolve this issue of allocating freight costs to line items/profit centers using the net value of the line items?

How to capture the selected values of the filter?

Hi Everybody
I have created a dashboard using a 4 column filter. It all works well - no problem.
I now need to enhance the functionality of the dashboard which needs the selected values of each of the parameters of the filter. As far as I know, the selections of the fiilter columns are not "Inserted In" any cell, only the data values of the corresponding row not including the filter columns are inserted in the "Inserted In" row, is there a way to capture the values of the filter column selections in some cells on the spreadsheet?
An early response from you all shall be highly valued.
Also, does anyone know which is the current equivalent version of Xcelsius to the old Xcelsius Workgroup version. This Xcelsius Workgroup version supported the "XML Integration Dynamic Refresh" wherein you didn't have to reinserted the updated Excel spreadsheet into Xcelsius have an updated dashboard - as long as the corresponding XML files were updated with the latest data, the exported dashboard would refresh.
Best regards
Deepak Agarwal

Along with the PBO and PAI event, add a POV event in the flow logic of the screen
DEMO_DROPDOWN_LIST_BOX -is a good demo example.
PROCESS ON VALUE-REQUEST.
FIELD structure_name-field_name MODULE create_dropdown_box.
In the report :
MODULE create_dropdown_box INPUT.
SELECT carrid carrname
                FROM scarr
                INTO CORRESPONDING FIELDS OF TABLE itab_carrid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'CARRID'
            value_org       = 'S'
       TABLES
            value_tab       = itab_carrid
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
ENDMODULE.
In the layout, assign a Function Code , for eg : 'SELECTED' to the listbox and lets say name of the field is SDYN_CONN-CARRID. So in the PAI module,
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'SELECTED'.
      MESSAGE i888(sabapdocu) WITH sdyn_conn-carrid.
ENDCASE.
ENDMODULE.
sdyb_conn-carrid will contain your selected field

How to change the initial value of the list.

Hi,
I have to change the initial value of the list.In the 'When-new-block instance' trigger, i wrote the following:
set_item_property(list_id,initial_value,
'2000');
But when I run the form, it says this property is not recognised.
I need to change the initial value.
Please help me out.
Thanks
Viji.

Do you mean the default value ?
Set_item_property('list_item_name', default_value,2000);

Need to eliminate the Zero values in the marker text in Bar chart

Similar Messages

Maybe you are looking for