Need to embed a pdf in report

I am using CONOS and ApplicationXtender.  COGNOS generates the report - ApplicationXtender stores the data.  I need to EMBED a PDF, possibly as a link in the report
AH

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription.  This is only one forum among the many that are on the TechNet Discussion Forums, and given
your post, you likely chose the wrong forum.  This is a standard response I’ve written up in advance to help many people (thousands, really.) who post their question in this forum in error, but please don’t ignore it.  The links I share below I’ve
collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize!  Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing. 
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you!  It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic. 
Thanks, Mike
MSDN and TechNet Subscriptions Support

Similar Messages

  • How to embed the needed fonts in a pdf file

    Dear Sir/Mam,
    We had purchased licenced version of adobe acrobat x pro
    We are facing issues while embedding the font in the pdf file
    Please find the below mentioned requirement
    Requirement:
    We have a pdf file (template) with some static images and static text in it
    We need to populate dynamic data in the pdf file for this we may use text boxes
    We need to set the font name for the text box and embed that font in the pdf template (Eg:Font to be used in textboxes is "RotisSansSerif-Bold")
    Queries
    Please let us know how to embed the needed fonts in the pdf file?
    Once user exports the pdf file, even if user doesnot have the fonts installed in his system the text need to be displayed in the same fonts,how to acheive this?Eg:if we define "RotisSansSerif-Bold" as font in the textboxes,after exporting the data the text need to be in the same font.
    Note:
    Fonts will only installed in the application server and not in the client system
    The mentioned requirement need to work on below mentioned specifications
    OS:Windiows-XP,  Browser:IE
    OS:Mac osx, Browser:Safari
    Regards,
    S.N.Prasad

    There is a similar post just a few away from yours. I will suggest what I would try. Open your job settings file (press or print preferred to get all fonts) and then select the properties and the font tab. At your font to the always embed list and you will likely need to uncheck the subset box. Then save your job settings (give it a name that is meaningful to you, you can not use the settings file you started with as they are read only and I do not recommend changing that). Maybe that will do the job. Of course that is for the creation of the PDF, I forgot you were talking about a form. You might check the form field properties, but I suspect you have already tried that. Guess I don't play with forms enough. Others may be by to answer.

  • Correct pdf from report 9i

    Wanted know as it is correct to get pdf from reports 9i. I necessary to get the report with Cyrillic symbol. Use section [ PDF:Embed ] beside me was not got. I have taken Type1 font from resource Acrobat reader 5.0, made sure by means of program fontview.exe from supply Windows that this font contains Cyrillic symbols, has described his use: "Courier New" = "COM_____.pfm COM_____.pfb". As a result pdf file was got with embedded font, but Cyrillic symbols are don't care displayed not correct. When use [ PDF:Subset ] is got correct displayed pdf, but with use font Type3 that on my not quite well.
    Thanks.

    Hi,
    Using PDF embeding with Type1 fonts will not give you the symbol as the Type1 fonts have characters only upto 256. The way to get the Cyrillic symbols properly is to use PDF subsetting. You need to use either UTF8 or any Cyrillic charcater set and use True Type fonts. Add proper entried to uifont.ali for subsetting. An example would be to add, "courier = courier.ttf". The ttf files location should be included in Reports path. Internaly when doing PDf subsetting, these are converted to Type3 fonts so you will always get that. It works properly with Acrobat reader 5.0 for displaying and printing purpose.
    Hope this helps!
    Thanks,
    Rohit

  • Report Rendering (Print & PDF) trashes report that looks fine on screen

    Since installing SQL Server 2012 SP2 CU3 (11.0.5556) a number of reports look fine on screen but when printed or exported to PDF the format is totally altered so that either many blank lines are inserted between lines, or lines are squashed together. It
    doesn't affect all reports. Reports (both affected and not affected) use Tablix with both Row Groups and Column Groups. There is no obvious consistency between those reports that are affected.
    All of our SQL Server instances are hosted on VM-Ware virtual servers.
    I've raised the issue via Microsoft Connect: https://connect.microsoft.com/SQLServer/feedback/details/1063641/report-rendering-print-pdf-trashes-report-that-looks-fine-on-screen
    Any thoughts or workarounds? Is this a bug?
    Thanks!

    Hi nsam,
    We installed the sqlserver 2012 sp2 cu3 in our lab, but unfortunately the issue cannot be duplicated, so I provided the following options for your reference.
    1),Please help to provide a way with detail steps to duplicate the issue.
    2),If you don't know how to duplicate the issue, please try to remove the sqlserver 2012 sp2 cu3 update by the following steps to see if the issue can be fixed.
    In Control Panel, open the Add or Remove Programs item.
    2. Click Change or Remove Programs .
    3. To see all the updates for the SQL Server 2012 installation, click to select the Show Updates check box.
    4.Uninstall the cumulative hotfix package.
    3,)Please visit this link to see the various support options that are available to better meet your needs: 
    http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone

  • How to embed a BI publisher Report in welcome page of fusion app?

    Hi,
    I was a ADF developer, new to fusion app and BI publisher. We are using Oracle Fusion Application version 11.1.7.0.0 for compensation implementation and BI publisher is a part of it.
    I've developed a BI publisher report, placed it under Shared Folder \ Custom, want to embed the same in welcome page of the fusion app. By following the video How do I embed a report in a sales dashboard? - YouTube, I followed below steps
    1. Administration -> Customize Work area page
    2. Add Content
    3. Clicked on 'Reports and Analytics'
    4. Clicked on 'BIPresentationServer'
    5. Shared Folder
    6. Custom
    Issue: Though I have some reports under this 'Custom' folder, it says 'Empty folder'. It only shows the 'Analysis' but not any reports. Problem is not with this folder alone but all. I've also ensured that I am able to see all the reports when I navigate using Navigator -> Tools - > Reports and Analysis.
    Can any of you guide me on what is the issue and what to be done?
    Thanks in Advance.

    Thanks for the link. I am reading it for better understanding.
    I just came to know from SR that, In order to see the BI Publisher in the Presentation Server list of values, we have to embed the BI Publihser report inside an OTBI Dashboard.
    So we need to create a 'Dashboards' folder (It is must only then we are able to see it via fusion apps. to select and embed), then Dashboard and add the desired report to this dashboard. Now we can navigate to this dashboard, open it and select the page to embed it.
    Might be useful for the ppl who faces similar issue. Thanks.
    Raghu

  • Open pdf in reports 10g

    hi every one.
    I have a problem that, I need to open the pdf file, which is store in the data base, on the reports.
    can any one help me
    ITS URGENT.

    hi
    the syntax used in given question is wrong.
    let me know ur mail id.. i will send u some sample..
    [email protected]
    regards
    prasanth a.s.

  • Embed Word/PDF Documents in Documaker 12.1

    Hi
    We have a requirement to embed word/PDF documents during runtime . The path for the PDF/Word document comes as an input in a XML node and we would need to have them embeded/inserted in between the formset. We use Documaker 12.1 ODEE and would like to know if there is any built in utilites/rules that would support adding word/PDF documents during run-time. The documents can be inserted anywhere on the policy package. Though the Rules reference manual says the rule AddMultipageBitmap can be used to embed word/PDF, it doesn't seems to work with them in UNIX. It works perfeclty well for TIFF images. Let us know if we would need to add entries in the INI files to support the rule to embed word/PDF documents.
    Any other approach out of the box is also appreciated. Thanks in advance..

    Hi,
    If it is Linux or Solaris the Word attachment to the document should work out-of-the-box with configuration. For AIX the Oracle Outside In Image Export runtime component that converts the documents for most document types (except for specific types of TIFF) needs a X11 DISPLAY context with user authorization for which to run the rule in because that what it uses to do the conversion to an image.
    Is this AIX you are trying to do this on? If so the ODEE installer for 12.1.x sets a DISPLAY variable in the docfactory.sh startup script in a section for that platform that you would have use to point to a X11 Motif or Lesstif DISPLAY (e.g. my.server.com:2) that has a running X11 server. VNC server option will work also so that the system can remain headless.
    I thought that the Oracle Documaker Enterprise Edition document covers this requirement under its attachments notes, not sure.
    See documentation on Oracle Outside In Image Export for supported documents it can handle and platforms.
    I am not sure if the version Oracle Documaker uses but here is a document reference for v8.3.5 for the Unix particulars, http://docs.oracle.com/cd/E14154_01/dev.835/e12885/c03_unix.htm .
    SCCOPT_RENDERING_PREFER_OIT settings referenced in the above document is only option on Solaris SPARC and Linux x86_32 platforms according to the Oracle Outside In Image Export Developer's Guide for v8.3.5 (http://docs.oracle.com/cd/E14154_01/dev.835/e12885.pdf).
    Regards,
    -Steve

  • Export to pdf crystal report

    staff
    I have a report that uses fields from the
    stored procedure, and it is working
    with out problems, only need to
    export to pdf automatically, only it
    is giving the following message:
    Missing parameter values
    I triedthe following commands:
    rptPrint.ExportToDisk(ExportFormatType.PortableDocFormat, "E:\test\rpt_sis\pdf\projecto_test.PDF")
    or
    Dim CrExportOptions As New ExportOptions
    Dim CrDiskFileDestinationOptions As New DiskFileDestinationOptions()
    Dim CrFormatTypeOptions As New PdfRtfWordFormatOptions()
    I'm using Visual Studio 2010 with
    vb.net Windows forms.

    Hi,
    Because this is a 3rd party product, you'd better to ask question at its official website for better support.
    Thank you for your understanding.
    Best Regards,
    Franklin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • SWF embed into PDF...white screen problem

    Hello,
    I have created a SWF Flash application using Flex 4.6, and I need to embed it into a PDF file.
    I have created the PDF via "Create from file" under Acrobat Pro X.1.4...no problem, my SWF application works perfectly into my acrobat Pro as well as acrobat reader.
    So, I have sent the file to my client, and he told me that he was unable to read the file : the PDF works, but he just have a white page without any flash application inside.
    Is there a way to correct the problem...Maybe there is something to do during the export to avoid this. But I don't know what ?!
    For information, my curstomer have an inferior version of Acrobat Pro (10.0.4) and i'm not sure he have installed Acrobat reader.
    Many thanks in advance for your help.
    Best regards.

    Updating Flash Player currently has no effect as Acrobat X uses an embedded copy of Flash Player. It only changes when you update Adobe Reader or Acrobat.
    The embedded Flash Player instance in the Acrobat X Family (10.1.4) right now is FP10.3.183.

  • Needed  sample program for emailing the report output

    hi all,
    neede sample program for emailing the report output

    Hi,
    Please refer this program for sending e-mail with attachment.
    ***INCLUDE ZHZLPP_CLZSN_DAILY_MIS_PRINT .
    *&      Form  print
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM print .
      DATA:  wa_output_options     TYPE ssfcompop,
             wa_control_parameters TYPE ssfctrlop,
             t_otfdata             TYPE ssfcrescl,
             t_pdf_tab             TYPE TABLE OF tline WITH HEADER LINE.
      DATA: t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE.
      DATA: w_filesize TYPE i.
      DATA: w_bin_filesize TYPE i.
      DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
      i_tline TYPE TABLE OF tline WITH HEADER LINE,
      v_form_name TYPE rs38l_fnam,
      v_len_in LIKE sood-objlen,
      w_return TYPE ssfcrescl.
      DATA : l_mean  TYPE p DECIMALS 2,
             l_mean1 TYPE p DECIMALS 2,
             l_mean2 TYPE p DECIMALS 2,
             l_mean3 TYPE p DECIMALS 4,
             temp    TYPE p DECIMALS 2,
             v_header LIKE zmisdisp3-remark,
             disp_d_kwh_mt TYPE zmisdisp5,
             disp_m_kwh_mt TYPE zmisdisp5,
             disp_d_mt_mw  TYPE zmisdisp5,
             disp_m_mt_mw  TYPE zmisdisp5,
             l_bptarget(16) TYPE p DECIMALS 2,
             l_act_d(16)    TYPE p DECIMALS 2,
             l_act_c(16)    TYPE p DECIMALS 2,
             l_pow_gen      TYPE p DECIMALS 2,
             l_pow_gen_d    TYPE p DECIMALS 2,
             l_pow_gen_c    TYPE p DECIMALS 2,
             l_no_of_days   TYPE p,
             disp_bptarget  TYPE zmisdisp5,
             disp_act_d     TYPE zmisdisp5,
             disp_act_c     TYPE zmisdisp5,
             disp_d_kwh     TYPE zmisdisp5,
             disp_c_kwh     TYPE zmisdisp5,
             disp_d_mw      TYPE zmisdisp5,
             disp_c_mw      TYPE zmisdisp5,
             disp_pow_gen_d TYPE zmisdisp5,
             disp_pow_gen_c TYPE zmisdisp5,
             disp_pow_gen   TYPE zmisdisp5,
             disp_ftd_h1    TYPE zmisdisp5,
             disp_ftd_h2    TYPE zmisdisp5,
             disp_ftd_h3    TYPE zmisdisp5,
             disp_ftd_h4    TYPE zmisdisp5,
             disp_ftd_h5    TYPE zmisdisp5,
             disp_ftd_o1    TYPE zmisdisp5,
             disp_ftd_o2    TYPE zmisdisp5,
             disp_ftd_o4    TYPE zmisdisp5,
             disp_ftd_o5    TYPE zmisdisp5,
             disp_***_o1    TYPE zmisdisp5,
             disp_***_o2    TYPE zmisdisp5,
             disp_***_o4    TYPE zmisdisp5,
             disp_***_o5    TYPE zmisdisp5,
             disp_cath_d    TYPE zmisdisp5,
             disp_cath_c    TYPE zmisdisp5,
             disp_anode_d   TYPE zmisdisp5,
             disp_anode_c   TYPE zmisdisp5,
             l_rec_con_d_kwh(16) TYPE p DECIMALS 2,
             l_rec_con_c_kwh(16) TYPE p DECIMALS 2,
             l_rec_con_d_mw(16)  TYPE p DECIMALS 2,
             l_rec_con_c_mw(16)  TYPE p DECIMALS 2,
             tot_kah      TYPE p DECIMALS 2,
             avg_kah      TYPE p DECIMALS 2,
             disp_tot_kah TYPE zmisdisp5,
             disp_avg_kah TYPE zmisdisp5,
             v_ftd_h1 TYPE p DECIMALS 2,
             v_ftd_h2 TYPE p DECIMALS 2,
             v_ftd_h3 TYPE p DECIMALS 2,
             v_ftd_h4 TYPE p DECIMALS 2,
             v_ftd_h5 TYPE p DECIMALS 2,
             v_ftd_o1 TYPE p DECIMALS 2,
             v_ftd_o2 TYPE p DECIMALS 2,
             v_ftd_o4 TYPE p DECIMALS 2,
             v_ftd_o5 TYPE p DECIMALS 2,
             v_***_o1 TYPE p DECIMALS 2,
             v_***_o2 TYPE p DECIMALS 2,
             v_***_o4 TYPE p DECIMALS 2,
             v_***_o5 TYPE p DECIMALS 2,
             l_cdiff1 LIKE imrg-cdiff,
             l_cdiff2 LIKE imrg-cdiff,
             l_cdiff3 LIKE imrg-cdiff,
             l_cdiff4 LIKE imrg-cdiff,
             l_path   LIKE rlgrap-filename,
             l_flag.
      DATA :prod_disp TYPE TABLE OF zmisdisp1 WITH HEADER LINE,
            keyp_disp TYPE TABLE OF zmisdisp2 WITH HEADER LINE,
            keyp_dis1 TYPE TABLE OF zmisdisp2 WITH HEADER LINE,
            rmat_disp TYPE TABLE OF zmisdisp4 WITH HEADER LINE,
            rcur_disp TYPE TABLE OF zmisdisp6 WITH HEADER LINE,
            rhrs_disp TYPE TABLE OF zmisdisp4 WITH HEADER LINE,
            brkd_disp TYPE TABLE OF zmisdisp7 WITH HEADER LINE.
      DEFINE fill_kpp.
        clear l_flag.
        loop at it_mic_data where kurztext = &1.
          l_mean1 = it_mic_data-mittelwert.
          l_mean = it_mic_data-mean.
          if l_flag = ' '.
            move : &2                     to keyp_disp-desc,
                   l_mean1                to keyp_disp-ftd.
            if     it_mic_data-kurztext = 'Ingot Pb SHG Zinc'.
              l_mean2 = v_mean_pbshg.
              move   l_mean2                to keyp_disp-avg.
            elseif it_mic_data-kurztext = 'Ingot Cu SHG Zinc'.
              l_mean2 = v_mean_cushg.
              move   l_mean2                to keyp_disp-avg.
            elseif it_mic_data-kurztext = 'Ingot Cd SHG Zinc'.
              l_mean2 = v_mean_cdshg.
              move   l_mean2                to keyp_disp-avg.
            elseif it_mic_data-kurztext = 'Ingot Fe SHG Zinc'.
              l_mean2 = v_mean_feshg.
              move   l_mean2                to keyp_disp-avg.
            elseif it_mic_data-kurztext = 'Ingot Zn SHG Zinc'.
              l_mean2 = v_mean_znshg.
              move   l_mean2                to keyp_disp-avg.
            else.
              move   l_mean                 to keyp_disp-avg.
            endif.
            if     it_mic_data-masseinhsw = 'GLI'.
              move 'g/l'                  to keyp_disp-unit.
            elseif it_mic_data-masseinhsw = 'PPM'.
              move 'ppm'                  to keyp_disp-unit.
            elseif it_mic_data-masseinhsw = 'NO'.
              move 'no'                   to keyp_disp-unit.
            else.
              move it_mic_data-masseinhsw to keyp_disp-unit.
            endif.
            append  keyp_disp.
            clear keyp_disp.
            move 'X' to l_flag.
          else.
            move : l_mean1                to keyp_disp-ftd.
            append  keyp_disp.
            clear keyp_disp.
          endif.
        endloop.
        if sy-subrc is not initial.
          move &2 to keyp_disp-desc.
          append  keyp_disp.
          clear keyp_disp.
        endif.
      END-OF-DEFINITION.
      DEFINE fill_kp1.
        clear l_flag.
        loop at it_mic_data where kurztext = &1.
          l_mean1 = it_mic_data-mittelwert.
          l_mean = it_mic_data-mean.
          if l_flag = ' '.
            move : &2                     to keyp_dis1-desc,
                   l_mean1                to keyp_dis1-ftd.
            if     it_mic_data-kurztext = 'Ingot Pb SHG Zinc'.
              l_mean2 = v_mean_pbshg.
              move   l_mean2                to keyp_dis1-avg.
            elseif it_mic_data-kurztext = 'Ingot Cu SHG Zinc'.
              l_mean2 = v_mean_cushg.
              move   l_mean2                to keyp_dis1-avg.
            elseif it_mic_data-kurztext = 'Ingot Cd SHG Zinc'.
              l_mean2 = v_mean_cdshg.
              move   l_mean2                to keyp_dis1-avg.
            elseif it_mic_data-kurztext = 'Ingot Fe SHG Zinc'.
              l_mean2 = v_mean_feshg.
              move   l_mean2                to keyp_dis1-avg.
            elseif it_mic_data-kurztext = 'Ingot Zn SHG Zinc'.
              l_mean3 = v_mean_znshg.
              move   l_mean3                to keyp_dis1-avg.
              clear  l_mean3.
              l_mean3 = it_mic_data-mittelwert.
              move   l_mean3                to keyp_dis1-ftd.
            else.
              move   l_mean                 to keyp_dis1-avg.
            endif.
            if     it_mic_data-masseinhsw = 'GLI'.
              move 'g/l'                  to keyp_dis1-unit.
            elseif it_mic_data-masseinhsw = 'PPM'.
              move 'ppm'                  to keyp_dis1-unit.
            elseif it_mic_data-masseinhsw = 'NO'.
              move 'no'                   to keyp_dis1-unit.
            else.
              move it_mic_data-masseinhsw to keyp_dis1-unit.
            endif.
            append  keyp_dis1.
            clear keyp_dis1.
            move 'X' to l_flag.
          else.
            if it_mic_data-kurztext = 'Ingot Zn SHG Zinc'.
              clear  l_mean3.
              l_mean3 = it_mic_data-mittelwert.
              move   l_mean3                to keyp_dis1-ftd.
            else.
              move : l_mean1                to keyp_dis1-ftd.
            endif.
            append  keyp_dis1.
            clear keyp_dis1.
          endif.
        endloop.
        if sy-subrc is not initial.
          move &2 to keyp_dis1-desc.
          append  keyp_dis1.
          clear keyp_dis1.
        endif.
      END-OF-DEFINITION.
    *FIRST PAGE
    ********PLANT HEADER
      MOVE 'CLZS HYDRO I PLANT - DAILY PRODUCTION REPORT' TO v_header.
    ********Production figure
      LOOP AT it_disp1.
        prod_disp-desc        = it_disp1-desc.
        prod_disp-d_plnmg     = it_disp1-d_plnmg.
        prod_disp-d_menge     = it_disp1-d_menge.
        prod_disp-u_plnmg     = it_disp1-u_plnmg.
        prod_disp-u_menge     = it_disp1-u_menge.
        prod_disp-avg         = it_disp1-avg.
        prod_disp-ask_rate    = it_disp1-ask_rate.
        prod_disp-m_plnmg     = it_disp1-m_plnmg.
        prod_disp-y_plnmg     = it_disp1-y_plnmg.
        prod_disp-y_menge     = it_disp1-y_menge.
        prod_disp-y_variance  = it_disp1-y_variance.
        APPEND prod_disp.
      ENDLOOP.
    ********Key performance parameters
      MOVE 'ROASTER :' TO keyp_disp-desc.
      APPEND  keyp_disp.
      fill_kpp '% S/S IN 45 DEG'            '  S/S in Calcine'.
      MOVE 'LEACHING :' TO keyp_disp-desc.
      APPEND  keyp_disp.
      fill_kpp '% S/S IN  CAL'              '  S/S in Calcine'.
      fill_kpp '%water soluble Zn'          '  W/S Zn in Jarosite Cake'.
      fill_kpp '%total Zn in HBF'           '  T/Zn in Jarosite cake'.
      fill_kpp 'ZINC IN CT'                 '  Zn in Conditioning tank'.
      fill_kpp 'g/l zn in neutral overflow' '  Zn in Electrolyte Prod (gpl)'.
      fill_kpp 'PPM CU IN PS25'             '  Purified Solution Cu'.
      fill_kpp 'PPM CADMIUM IN PS25'        '  Purified Solution Cd'.
      fill_kpp 'PPM COBALT IN PS25'         '  Purified Solution Co'.
      MOVE 'CELLHOUSE :' TO keyp_disp-desc.
      APPEND  keyp_disp.
      fill_kpp 'g/l zinc in cell feed'      '  Cell Feed Zinc gpl'.
      fill_kpp 'GPL ACID IN CELL FEED'      '  Cell Feed acidity gpl'.
      fill_kpp 'g/l manganese in cell feed' '  Cell Feed Mn gpl'.
      LOOP AT t_imrg_add_disp.
        MOVE:  t_imrg_add_disp-desc    TO keyp_disp-desc,
               t_imrg_add_disp-d_value TO keyp_disp-ftd,
               t_imrg_add_disp-c_value TO temp,
               temp                    TO keyp_disp-avg.
        IF t_imrg_add_disp-units = 'NO'.
          MOVE:  'no'                    TO keyp_disp-unit.
        ELSE.
          MOVE:  t_imrg_add_disp-units   TO keyp_disp-unit.
        ENDIF.
        APPEND keyp_disp.CLEAR keyp_disp.
      ENDLOOP.
      fill_kp1 'Ingot Pb SHG Zinc'          '  Ingot Pb SHG Zinc'.
      fill_kp1 'Ingot Cu SHG Zinc'          '  Ingot Cu SHG Zinc'.
      fill_kp1 'Ingot Cd SHG Zinc'          '  Ingot Cd SHG Zinc'.
      fill_kp1 'Ingot Fe SHG Zinc'          '  Ingot Fe SHG Zinc'.
      fill_kp1 'Ingot Zn SHG Zinc'          '  Ingot Zn SHG Zinc'.
    ********Cellhouse power
      CATCH SYSTEM-EXCEPTIONS bcd_zerodivide = 1.
        v_m_kwh_mt = v_ind8_m / cathode_recipt.
        v_m_mt_mw  = cathode_recipt / ( v_ind8_m / 24000 ).
      ENDCATCH.
      MOVE : v_d_kwh_mt TO disp_d_kwh_mt,
             v_m_kwh_mt TO disp_m_kwh_mt,
             v_d_mt_mw  TO disp_d_mt_mw,
             v_m_mt_mw  TO disp_m_mt_mw.
    *SECOND PAGE
    ********Raw Material
      LOOP AT it_disp3.
        rmat_disp-desc    = it_disp3-desc.
        rmat_disp-opstk   = it_disp3-opstk.
        rmat_disp-d_recpt = it_disp3-d_recpt.
        rmat_disp-u_recpt = it_disp3-u_recpt.
        rmat_disp-d_cons  = it_disp3-d_cons.
        rmat_disp-u_cons  = it_disp3-u_cons.
        rmat_disp-clstk   = it_disp3-clstk.
        APPEND rmat_disp.
      ENDLOOP.
    ********Work in Progress
    ********Finished Goods
    ********power consumption
      l_no_of_days = v_mm_en_dt+6(2).
      CATCH SYSTEM-EXCEPTIONS bcd_zerodivide = 1.
        l_bptarget   = ( v_bp_nrms_p * v_gross_d ) / l_no_of_days.
        l_act_d      = v_ind6_d + v_ind2_d - ( v_ind3_d + ( v_ind4_d / 2 ) ) - v_ind5_d.
        l_act_c      = v_ind6_m + v_ind2_m - ( v_ind3_m + ( v_ind4_m / 2 ) ) - v_ind5_m.
        l_pow_gen    = ( v_ind2_d / 1000 ) / v_ind7_d.
      ENDCATCH.
      l_pow_gen_d  = v_ind2_d / 1000.
      l_pow_gen_c  = v_ind9_m / 1000.
      l_rec_con_d_kwh = v_ind8_d.
      l_rec_con_c_kwh = v_ind8_m.
      l_rec_con_d_mw  = v_ind8_d / 24000.
      l_rec_con_c_mw  = v_ind8_m / ( 24000 * v_days_pased ).
      LOOP AT t_disp_curr.
        rcur_disp-time    = t_disp_curr-time.
        rcur_disp-current = t_disp_curr-current.
        rcur_disp-kah     = t_disp_curr-kah.
        APPEND rcur_disp.
        AT LAST.
          SUM.
          tot_kah = t_disp_curr-kah.
        ENDAT.
      ENDLOOP.
      avg_kah = tot_kah / '24'.
    *********************running hrs
      LOOP AT it_disp6.
        rhrs_disp-desc    = it_disp6-desc.
        rhrs_disp-opstk   = it_disp6-d_runhrs.
        rhrs_disp-d_recpt = it_disp6-m_runhrs.
        APPEND rhrs_disp.
      ENDLOOP.
      rhrs_disp-desc    = 'Turbo Generator'.
      rhrs_disp-opstk   = v_turbod.
      rhrs_disp-d_recpt = v_turboc.
      INSERT rhrs_disp INDEX 2.
    **********************BREAK_DOWN & OIL
      CLEAR value.
      LOOP AT itab2.
        IF itab2-equnr = 'NMZ-EH01G001'.
          PERFORM s_conversion_h.
          v_ftd_h1 = v_ftd_h1 + value.
          CLEAR value.
        ENDIF.
        IF itab2-equnr = 'NMZ-EH01G002'.
          PERFORM s_conversion_h.
          v_ftd_h2 = v_ftd_h2 + value.
          CLEAR value.
        ENDIF.
        IF itab2-equnr = 'NMZ-EH01V003'.
          PERFORM s_conversion_h.
          v_ftd_h3 = v_ftd_h3 + value.
          CLEAR value.
        ENDIF.
        IF itab2-equnr = 'NMZ-EH01V001'.
          PERFORM s_conversion_h.
          v_ftd_h4 = v_ftd_h4 + value.
          CLEAR value.
        ENDIF.
        IF itab2-equnr = 'NMZ-EH01V002'.
          PERFORM s_conversion_h.
          v_ftd_h5 = v_ftd_h5 + value.
          CLEAR value.
        ENDIF.
      ENDLOOP.
      LOOP AT t_oil.
        AT END OF ind.
          SUM.
          IF t_oil-ind = 1.
            v_***_o1 = t_oil-cdiff * 1000.
          ELSEIF t_oil-ind = 2.
            v_***_o2 = t_oil-cdiff * 1000.
          ELSEIF t_oil-ind = 3.
            v_***_o4 = t_oil-cdiff * 1000.
          ELSEIF t_oil-ind = 4.
            v_***_o5 = t_oil-cdiff * 1000.
          ENDIF.
        ENDAT.
        IF t_oil-idate = p_repdt.
          IF t_oil-ind = 1.
            l_cdiff1 = l_cdiff1 + t_oil-cdiff.
          ELSEIF t_oil-ind = 2.
            l_cdiff2 = l_cdiff2 + t_oil-cdiff.
          ELSEIF t_oil-ind = 3.
            l_cdiff3 = l_cdiff3 + t_oil-cdiff.
          ELSEIF t_oil-ind = 4.
            l_cdiff4 = l_cdiff4 + t_oil-cdiff.
          ENDIF.
        ENDIF.
      ENDLOOP.
      v_ftd_o1 = l_cdiff1 * 1000.
      v_ftd_o2 = l_cdiff2 * 1000.
      v_ftd_o4 = l_cdiff3 * 1000.
      v_ftd_o5 = l_cdiff4 * 1000.
    *********Breakdown details----3rd page
      LOOP AT itab INTO wa.
        CALL FUNCTION 'FLTP_CHAR_CONVERSION'
          EXPORTING
            decim = 0
            expon = 0
            input = wa-auszt
            ivalu = 'X'
          IMPORTING
            flstr = wk_char_auszt.
        CONDENSE wk_char_auszt NO-GAPS.
        wk_flt_auszt = wk_char_auszt.
        wk_flt_auszt = wk_flt_auszt / 3600.
        duration = wk_flt_auszt.
        brkd_disp-eqdesc = wa-eqktx.
        brkd_disp-nodesc = wa-qmtxt.
        brkd_disp-hrs    = duration.
        APPEND brkd_disp.
      ENDLOOP.
      MOVE : v_ftd_h1 TO disp_ftd_h1,
             v_ftd_h2 TO disp_ftd_h2,
             v_ftd_h3 TO disp_ftd_h3,
             v_ftd_h4 TO disp_ftd_h4,
             v_ftd_h5 TO disp_ftd_h5,
             v_ftd_o1 TO disp_ftd_o1,
             v_ftd_o2 TO disp_ftd_o2,
             v_ftd_o4 TO disp_ftd_o4,
             v_ftd_o5 TO disp_ftd_o5,
             v_***_o1 TO disp_***_o1,
             v_***_o2 TO disp_***_o2,
             v_***_o4 TO disp_***_o4,
             v_***_o5 TO disp_***_o5,
             l_bptarget      TO disp_bptarget,
             l_act_d         TO disp_act_d,
             l_act_c         TO disp_act_c,
             l_rec_con_d_kwh TO disp_d_kwh,
             l_rec_con_c_kwh TO disp_c_kwh,
             l_rec_con_d_mw  TO disp_d_mw,
             l_rec_con_c_mw  TO disp_c_mw,
             tot_kah         TO disp_tot_kah,
             avg_kah         TO disp_avg_kah,
             l_pow_gen       TO disp_pow_gen,
             l_pow_gen_d     TO disp_pow_gen_d,
             l_pow_gen_c     TO disp_pow_gen_c,
             v_cath_d        TO disp_cath_d,
             v_cath_c        TO disp_cath_c,
             v_anode_d       TO disp_anode_d,
             v_anode_c       TO disp_anode_c.
      wa_output_options-tdimmed = 'X'.
      wa_control_parameters-device = 'PRINTER'.
      wa_control_parameters-preview = 'X'.
      IF rb3 = 'X'.
        wa_control_parameters-getotf  = 'X'.
        wa_control_parameters-no_dialog = 'X'.
      ENDIF.
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = 'ZHZLPP_CLZSN_DAILY_MIS'
        IMPORTING
          fm_name            = v_form_name
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      IF sy-subrc <> 0.
      ENDIF.
      CALL FUNCTION v_form_name
        EXPORTING
          control_parameters         = wa_control_parameters
          output_options             = wa_output_options
          user_settings              = 'X'
          header                     = v_header
          date                       = p_repdt
          l_bptarget                 = disp_bptarget
          l_act_d                    = disp_act_d
          l_act_c                    = disp_act_c
          disp_d_kwh                 = disp_d_kwh
          disp_c_kwh                 = disp_c_kwh
          disp_d_mw                  = disp_d_mw
          disp_c_mw                  = disp_c_mw
          disp_tot_kah               = disp_tot_kah
          disp_avg_kah               = disp_avg_kah
          disp_d_kwh_mt              = disp_d_kwh_mt
          disp_m_kwh_mt              = disp_m_kwh_mt
          disp_d_mt_mw               = disp_d_mt_mw
          disp_m_mt_mw               = disp_m_mt_mw
          disp_pow_gen               = disp_pow_gen
          disp_pow_gen_d             = disp_pow_gen_d
          disp_pow_gen_c             = disp_pow_gen_c
          disp_ftd_h1                = disp_ftd_h1
          disp_ftd_h2                = disp_ftd_h2
          disp_ftd_h3                = disp_ftd_h3
          disp_ftd_h4                = disp_ftd_h4
          disp_ftd_h5                = disp_ftd_h5
          disp_ftd_o1                = disp_ftd_o1
          disp_ftd_o2                = disp_ftd_o2
          disp_ftd_o4                = disp_ftd_o4
          disp_ftd_o5                = disp_ftd_o5
          disp_***_o1                = disp_***_o1
          disp_***_o2                = disp_***_o2
          disp_***_o4                = disp_***_o4
          disp_***_o5                = disp_***_o5
          disp_cath_d                = disp_cath_d
          disp_cath_c                = disp_cath_c
          disp_anode_d               = disp_anode_d
          disp_anode_c               = disp_anode_c
      IMPORTING
        job_output_info              = w_return           " .    
        TABLES
          prod_tab                   = prod_disp
          keyp_tab                   = keyp_disp
          remk_tab                   = it_remarks
          rmat_tab                   = rmat_disp
          rwip_tab                   = it_disp4
          rfng_tab                   = it_disp_fg
          rcur_tab                   = rcur_disp
          rhrs_tab                   = rhrs_disp
          brkd_tab                   = brkd_disp
          keyp_tab1                  = keyp_dis1
        EXCEPTIONS
          formatting_error           = 1
          internal_error             = 2
          send_error                 = 3
          user_canceled              = 4
          OTHERS                     = 5
      IF sy-subrc <> 0.
        MESSAGE 'Error in printing form' TYPE 'I'.
      ENDIF.
    ********Downloading in pdf format.
      IF rb3 = 'X'.
        IF l_usract <> 9.
          MOVE fullpath TO l_path.
          i_otf[] = w_return-otfdata[].
          CALL FUNCTION 'CONVERT_OTF'                   "
            EXPORTING
              format                = 'PDF'
              max_linewidth         = 132
            IMPORTING
              bin_filesize          = v_len_in
            TABLES
              otf                   = i_otf
              lines                 = i_tline
            EXCEPTIONS
              err_max_linewidth     = 1
              err_format            = 2
              err_conv_not_possible = 3
              OTHERS                = 4.
          IF sy-subrc <> 0.
          ENDIF.
          CALL FUNCTION 'WS_DOWNLOAD'
            EXPORTING
              bin_filesize            = v_len_in
              filename                = l_path
              filetype                = 'BIN'
            IMPORTING
              filelength              = w_filesize
            TABLES
              data_tab                = i_tline
            EXCEPTIONS
              file_open_error         = 1
              file_write_error        = 2
              invalid_filesize        = 3
              invalid_type            = 4
              no_batch                = 5
              unknown_error           = 6
              invalid_table_width     = 7
              gui_refuse_filetransfer = 8
              customer_error          = 9
              OTHERS                  = 10.
          IF sy-subrc = 0.
            MESSAGE 'File downloaded successfully' TYPE 'S'.
          ENDIF.
        ENDIF.
      ENDIF.
      IF sy-batch = 'X'.               " SENDING MAILS IF SCHEDULED IN BACKGROUND
        DATA: formname           TYPE tdsfname,
              fm_name            TYPE rs38l_fnam,
              control_parameters TYPE ssfctrlop,
              output_options     TYPE ssfcompop,
              job_output_info    TYPE ssfcrescl,
              otf_data           TYPE tsfotf.
        DATA: otf                TYPE TABLE OF itcoo WITH HEADER LINE,
              doctab_archive     TYPE TABLE OF docs WITH HEADER LINE,
              lines              TYPE TABLE OF tline WITH HEADER LINE,
              bin_filesize       TYPE i.
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
          EXPORTING
            formname           = 'ZHZLPP_CLZSN_DAILY_MIS'
          IMPORTING
            fm_name            = v_form_name
          EXCEPTIONS
            no_form            = 1
            no_function_module = 2
            OTHERS             = 3.
        IF sy-subrc <> 0.
        ENDIF.
        control_parameters-no_dialog = 'X'.
        control_parameters-getotf    = 'X'.
        CALL FUNCTION v_form_name
          EXPORTING
            control_parameters = control_parameters
            header             = v_header
            date               = p_repdt
            l_bptarget         = disp_bptarget
            l_act_d            = disp_act_d
            l_act_c            = disp_act_c
            disp_d_kwh         = disp_d_kwh
            disp_c_kwh         = disp_c_kwh
            disp_d_mw          = disp_d_mw
            disp_c_mw          = disp_c_mw
            disp_tot_kah       = disp_tot_kah
            disp_avg_kah       = disp_avg_kah
            disp_d_kwh_mt      = disp_d_kwh_mt
            disp_m_kwh_mt      = disp_m_kwh_mt
            disp_d_mt_mw       = disp_d_mt_mw
            disp_m_mt_mw       = disp_m_mt_mw
            disp_pow_gen       = disp_pow_gen
            disp_pow_gen_d     = disp_pow_gen_d
            disp_pow_gen_c     = disp_pow_gen_c
            disp_ftd_h1        = disp_ftd_h1
            disp_ftd_h2        = disp_ftd_h2
            disp_ftd_h3        = disp_ftd_h3
            disp_ftd_h4        = disp_ftd_h4
            disp_ftd_h5        = disp_ftd_h5
            disp_ftd_o1        = disp_ftd_o1
            disp_ftd_o2        = disp_ftd_o2
            disp_ftd_o4        = disp_ftd_o4
            disp_ftd_o5        = disp_ftd_o5
            disp_***_o1        = disp_***_o1
            disp_***_o2        = disp_***_o2
            disp_***_o4        = disp_***_o4
            disp_***_o5        = disp_***_o5
            disp_cath_d        = disp_cath_d
            disp_cath_c        = disp_cath_c
            disp_anode_d       = disp_anode_d
            disp_anode_c       = disp_anode_c
          IMPORTING
            job_output_info    = job_output_info
          TABLES
            prod_tab           = prod_disp
            keyp_tab           = keyp_disp
            remk_tab           = it_remarks
            rmat_tab           = rmat_disp
            rwip_tab           = it_disp4
            rfng_tab           = it_disp_fg
            rcur_tab           = rcur_disp
            rhrs_tab           = rhrs_disp
            brkd_tab           = brkd_disp
            keyp_tab1          = keyp_dis1
          EXCEPTIONS
            formatting_error   = 1
            internal_error     = 2
            send_error         = 3
            user_canceled      = 4
            OTHERS             = 5.
        IF sy-subrc = 0.
          otf_data = job_output_info-otfdata[].
          CALL FUNCTION 'CONVERT_OTF_2_PDF'
            IMPORTING
              bin_filesize           = bin_filesize
            TABLES
              otf                    = otf_data[]
              doctab_archive         = doctab_archive[]
              lines                  = lines[]
            EXCEPTIONS
              err_conv_not_possible  = 1
              err_otf_mc_noendmarker = 2
              OTHERS                 = 3.
          IF sy-subrc = 0.
            SUBMIT rsconn01 with mode = 'INT' AND RETURN.
    *                                    ----<<distrubution list>>----
            PERFORM mail_users TABLES lines USING 'MIS-HY1A' v_header.   " Donot put more than 8 email-ids
            PERFORM mail_users TABLES lines USING 'MIS-HY1B' v_header.   " in a distribution list
            PERFORM mail_users TABLES lines USING 'MIS-HY1C' v_header.
            PERFORM mail_users TABLES lines USING 'MIS-HY1D' v_header.
            PERFORM mail_users TABLES lines USING 'MIS-HY1E' v_header.
            PERFORM mail_users TABLES lines USING 'MIS-HY1F' v_header.
            PERFORM mail_users TABLES lines USING 'MIS-HY1G' v_header.
            PERFORM mail_users TABLES lines USING 'MIS-HY1H' v_header.
            PERFORM mail_users TABLES lines USING 'MIS-HY1I' v_header.
            PERFORM mail_users TABLES lines USING 'MIS-HY1J' v_header.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDFORM.                    " print
    *&      Form  get_download_path
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM get_download_path .
      CALL FUNCTION 'GUI_FILE_SAVE_DIALOG'
        EXPORTING
          window_title      = 'Download as pdf file'
          default_extension = 'pdf'
        IMPORTING
          fullpath          = fullpath
          user_action       = l_usract.
      IF l_usract = '9'.
        STOP.
      ENDIF.
    ENDFORM.                    " get_download_path
    *&      Form  mail_users
    *       text
    *      -->P_LINES  text
    *      -->P_2153   text
    *      -->P_V_HEADER  text
    FORM mail_users  TABLES   p_lines STRUCTURE tline
                     USING    p_dist_list
                              p_v_header.
      CONSTANTS: c_raw TYPE so_obj_tp VALUE 'RAW',
                 c_pdf TYPE so_obj_tp VALUE 'PDF',
                 c_255 TYPE i VALUE 255,
                 c_134 TYPE i VALUE 134,
                 c_x   TYPE c VALUE 'X'.
      DATA: document_data LIKE sodocchgi1 ,
            tab_lines     TYPE i,
            contents_txt  TYPE TABLE OF solisti1 WITH HEADER LINE,
            contents_bin  TYPE TABLE OF solisti1 WITH HEADER LINE,
            packing_list  TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
            object_header TYPE TABLE OF solisti1 WITH HEADER LINE,
            receivers     TYPE TABLE OF somlreci1 WITH HEADER LINE,
            l_str(255) ,
            v1 TYPE i,
            v2 TYPE i,
            v3 TYPE i.
      document_data-obj_name  = 'EMAIL'.
      document_data-obj_descr = p_v_header.  " SUBJECT LINE
      CONCATENATE 'Please find the attached SAP generated Daily Production Report for the day'
                  p_repdt+6(2)
                  p_repdt+4(2)
                  '.' p_repdt+0(4)
             INTO contents_txt.
      APPEND      contents_txt.
      CLEAR       contents_txt.
      APPEND      contents_txt.
      APPEND      contents_txt.
      DESCRIBE TABLE contents_txt LINES tab_lines.
      READ TABLE     contents_txt INDEX tab_lines.
      document_data-doc_size  = ( tab_lines - 1 ) * 255 + STRLEN( contents_txt ).
      document_data-doc_size  = tab_lines .
      CLEAR packing_list-transf_bin.
      packing_list-head_start = 1.
      packing_list-head_num   = 0.
      packing_list-body_start = 1.
      packing_list-body_num   = tab_lines.
      packing_list-doc_type   = c_raw.
      packing_list-doc_size   = document_data-doc_size.
      APPEND packing_list.
      LOOP AT p_lines.
        CLEAR l_str.
        l_str+0(2)   = p_lines-tdformat.
        l_str+2(132) = p_lines-tdline.
        v2 = v1 + c_134.
        IF v2 LE c_255.
          contents_bin-line+v1(c_134) = l_str. v1 = v2.
        ELSE.
          v3 = v2 - c_255.
          v2 = c_255 - v1.
          IF NOT v2 IS INITIAL.
            contents_bin-line+v1(v2) = l_str+0(v2).
          ENDIF.
          APPEND contents_bin.
          CLEAR  contents_bin.
          v1 = v3.
          v3 = 134 - v1.
          IF NOT v1 IS INITIAL.
            contents_bin-line+0(v1) = l_str+v3(v1).
          ENDIF.
        ENDIF.
      ENDLOOP.
      APPEND contents_bin.
      CLEAR  contents_bin.
      DESCRIBE TABLE contents_bin LINES tab_lines.
      READ     TABLE contents_bin INDEX tab_lines.
      CONCATENATE 'Hy-I Report'
                  p_repdt+6(2)
                  p_repdt+4(2)
                  '.' p_repdt+0(4)
                  '.pdf'
             INTO object_header.
      APPEND object_header.
      packing_list-transf_bin = c_x.
      packing_list-head_start = 1.
      packing_list-head_num   = 1.
      packing_list-body_start = 1.
      packing_list-body_num   = tab_lines.
      packing_list-doc_type   = c_pdf.
      packing_list-obj_name   = 'text1'.
      packing_list-obj_descr  = 'Production report'.
      packing_list-doc_size   = tab_lines * 255 + STRLEN( contents_bin ).
      APPEND packing_list.
      receivers-receiver      = p_dist_list.
      receivers-rec_type      = 'C'.
      APPEND receivers.
      CLEAR  receivers.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
        EXPORTING
          document_data              = document_data
          put_in_outbox              = ' '
          SENDER_ADDRESS             = 'CZPPPLG'
          SENDER_ADDRESS_TYPE        = 'B'
          commit_work                = 'X'
        TABLES
          packing_list               = packing_list
          object_header              = object_header
          contents_bin               = contents_bin
          contents_txt               = contents_txt
          receivers                  = receivers
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
      IF sy-subrc = 0.
        WAIT UP TO 2 SECONDS.
        SUBMIT rsconn01 with mode = 'INT' AND RETURN.
      ENDIF.
    ENDFORM.                    " mail_users

  • Air for Android - Embed a pdf in Air Mobile app

    Hi at all,
    i would like to embed a pdf directly in a View Component and use the Adobe Reader features like zoom, navigation page etc.
    Any suggest?
    Thanks.
    F.

    You can call native code from AS3 by writing an AIR Native Extension (ANE):
    http://www.adobe.com/devnet/air/native-extensions-for-air.html
    BTW: Flash already contains quite a few image processing filters and image compositioning algorithms. They may be suitable, depending on your needs.

  • Do I need to install forms 6.0 & reports 6.0 on separate homes

    Hello All,
    I need to install Oracle developer suite 6.0 & Oracle Developer suite 10g on the same computer.
    I have planned to install both on separate homes.
    My question is that "Do I need to install forms 6.0 & reports 6.0 on separate homes?".
    Regards,
    D

    Hello,
    no, it is not necessary to Install Forms6i and Reports6i in a different Oracle Home.
    Francois

  • Need to convert AP Invoice Aging Report in Excel format

    Hi,
    Need to convert AP Invoice Aging Report in excel format..there was an existing Invoice Aging report in AP and that was in paper format. That we need to convert to rtf template..
    There was an other concurrent program called 'Invoice Aging Report (XML) - Reserveed for future use', when i am using that rtf template..to get the report output it was taking more than 1 hr time.
    1)Is there any way/patch to get that XML report to be used in 12.1.3 EBS version
    2) is there any other way to get the report output faster.
    Thanks..

    Hi,
    When submitting the request, you may change the output to Excel and get the output in Excel. Otherwise as you mention if you getting the output in text format, you may download the text format and open the document in excel and use the delimitation to format in excel as per your requirement.
    1)Is there any way/patch to get that XML report to be used in 12.1.3 EBS version
    2) is there any other way to get the report output faster.
    Is your statistics up to date, when did you last run gather schema statistics program in Sysadmin responsibility.
    Also what is the record quantity that you are expecting here? Is date range parameter available in the report and if yes, did you try running the report for a day to check the output.
    Thanks &
    Best Regards,

  • Need standrad program for vendor aging report

    Hi
      Need standrad program for vendor aging report.
    Please reply me only standrad programs.
    Point are sure.
    Regards,
    kumar

    Hi Pankaj
       sorry to say that this is not my required program.
    I need vendor aging report like s_alr_87012178 tc leads to customer aging report.
    Thanks for your effort.
    points are awarded.
    Regards,
    kumar

  • Need Date manipulation in BI Publisher report template

    Hi All,
    I need date manipulation in BI Publisher report template for e.g sysdate+4 this means i need 4 days after todays sysdate.
    That menas if today date(sysdate) is 09/01/2008 then i need (sysdate+4) i.e 13/01/2008.
    Please help me.
    Thanks
    Edited by: user562690 on Jan 9, 2009 3:21 PM

    Hi M14,
    I have doubt on similar type.I have AgreementStartDate as
    <AgreementStartDate>12/03/2008 07:24:10</AgreementStartDate> in XML format.
    I am not able to apply same formula for thsi date format in similar manipulation.
    Please help me.
    TIA
    skr

Maybe you are looking for