Need to get SOAP request and SOAP response message.

Hi All,
I need to know that how can I get the SOAP request and SOAP response message. Now I am using WSDL2Java tool from Axis to generate the stub classes (such as ServiceLocator, SoapBindingStub, and soapPort ) and applying the classes to make the SOAP request. I have seen the solution for getting the SOAP request with Dynamic invocation interface (DII) style (http://mail-archives.apache.org/mod_mbox/ws-soap-user/200310.mbox/%[email protected]%3e), but not Static stub like what I did. Could anyone suggest me how to do it please ( I can't run tcpcom on the linux server, because x-window is not allowed to install ). Thank you for any help in advance.

You can try writing a client-side handler.
Handler gets called before the actual request is sent, and you can get the SOAP
message in it.
You have to deploy the handler in client-config.wsdd.
Handler is just like Servlet Filter.
I think there might be a simpler solution, but I dont know.

Similar Messages

How to trap SOAP request and SOAP responce

Hello,
I want to trap all soap messages send by WS client.
I am using jdeveloper. How could i do that. please help me.
I want to directly see all soap request(Whole xml document)

Hi All,
SOAP Framework AXIS provided the tool TCPMONITOR to monitor the SOAPRequest,SOAPResponse which is passing between ServiceConsumer and ServiceProvider.To do this just follow the below steps.
Step1:Set axis.jar in the classpath and then Run the java class(it will open a window)
java org.apache.axis.utils.tcpmon [listenPort targetHost targetPort]
For suppose you are running webservice at port number 8888.
Here listenPort is some port number which is not using by anyother give number like 7070 and targetHost is IP address of System where the Webservice is running,targetPort is portnumber where the Webservice is running.
For example java org.apache.axis.utils.tcpmon 7070 127.0.0.1 8888
i.e In client application you have to modify the portnumber to 7070,once user submitted the request that request going to portnumber at 7070 where TcpMonitor is listening,SOAPRequest will come in Request Box and and select submit button then request going to service at port numer 8888,then you can view the response in Response Box.you can get more details in the following url
http://ws.apache.org/axis/java/user-guide.html#AppendixUsingTheAxisTCPMonitorTcpmon
Thanks&Regards,
M.Kumaraswamy.

SOAP request and response message

Hi,everyone:
I am working on one jaxrpc project.
I would like to get a concrete SOAP request and response message.
Do somebody know how and where i can get these two message?
thanks in advance
Hui
[email protected]

I am also interested in the sample. Please post, any examples, I just finished the tutorial looking for further resources too.
R

With Adobe FormsCentral in Creative Teams subscription, do I need to add an Acrobat Pro subscription to get unlimited forms and realtime responses?

We have a number of Creative Cloud for Teams seats but need to FormsCentral unlimited forms and realtime response rate.
The site makes you upgrade to Acrobat Pro subscription to get that, which is included in Creative Cloud. I did order it, but am puzzled at whether or not that was a mistake.
Anyone has an idea about this?

Hi GrattanGuru,
You have creative cloud subscription as you have mentioned. Under Adobe Reader to convert PDF to other formats Adobe offers online service called Acrobat.com services: https://www.acrobat.com/en_us.html
That would be the reason support person might have told you on call, that you have to pay for that service.
Under creative cloud you are getting Adobe applications. However under Acrobat.com you are getting online services which are providing Acrobat functions online.
Regards,
Ajlan Huda.

Issue about BI JAVA SDK-SOAP request failed with return message 2147483653

Dear Experts,
I'm trying to use BI JAVA SDK to connect BW by using XMLA connector.
But there's an error messaet said :
SOAP request failed with return message 2147483653 ( Invalid MDX command with INCLUDING)
I'm really new to this JAVA SDK, and after searching help in SAP Service Market and Google, there's no helpful suggestion.
please help me about how to fix this error.
Here is my code:
IBIConnection connection = (IBIConnection) cf.getConnectionEx(cs);
      IBIOlap olap = connection.getOlap();
      Cube cube = olap.getObjectFinder().
      findCubeFirst((String)null, "ZFI_C11/ZFI_C11_Q001");
    // This is just a sanity check to verify that the
    // cube on which this example relies was retrieved
    if (cube==null){
        System.out.println("no cube found");
// Didn't print out this message, seems it can connect to BW and get the InfoCube and Query.
    Dimension plantDimension = olap.getObjectFinder().
    findDimensionFirst(cube, "ZPLANT");
Dimension materialDimension = olap.getObjectFinder().
    findDimensionFirst(cube, "ZMATERIAL");
IBIQuery query = olap.createQuery(cube);
IBICommandProcessor commandProcessor = query.getCommandProcessor();
commandProcessor.moveDimensionToRows(plantDimension);
commandProcessor.moveDimensionToRows(materialDimension);
IBIDataSet dataset = query.execute(); // After execute this statement, error happens.
Thank you!
Andy

Solved myself, it's because the query used in my code have user input variable.

Parameter JCO.Request and JCO.Response where null

Hi ;
I try to execute RFCtoRFC scenario. I have done all settings including receiver,sender agreement too.
But when i call rfc , i get following error
parameter JCO.Request and JCO.Response where <null>
My code that the calls a remote function is like;
CALL FUNCTION 'ZBAPI_EH_GET_DATA_GEN'
DESTINATION 'OLT200'
What would be the reason ?
Thanks

Hi,
in your RFC call, specify the data which is sent as RFC req msg from R/3 system in EXPORTING parameter if your RFC call is asycnh or both EXPORTING and RFC response msg structure in IMPORTING if your RFC call is synch.........in your report, use pretty printer and specify your RFC in CALL FUNCTION and then you will see the default calling procedure of your RFC.......then create a structue for your RFC req msg structure and response msg struc and fill it with data and then execute your RFC by using this CALL FUNCTION method.........
Regards,
Rajeev Gupta

HT4527 how to transfer info to a mac book pro from a pc i need to get my iTunes and other iTunes related items off of my old computer so i can sync my phone and get my music

how to transfer info to a mac book pro from a pc i need to get my iTunes and other iTunes related items off of my old computer so i can sync my phone and get my music.
I have already tranferd some info to an external hard drive i just need to get my itune items. also i have heard if you plug your phone to a differnt computer you lose of you information.
i need help please.

The tv is a extended display on your mac like a second moitor you want to mirror them (same thing on both)
This should help you

I was getting into iPhoto and got a message iPhoto needs to b e updated. I clicked and all my pictures are gone. How do I get them back?

I was getting into Iphoto and got a message that Iphoto needed updating. I complied and have lost all my pics? Where could they have gone?

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

SOAP request failed with return message 2147483653

Hello everybody!
I've got a constant error while trying to execute following MDX-statement via BI Java SDK:
SELECT {[0BCS_REPMOD].[N],[0BCS_REPMOD].[P],[0BCS_REPMOD].[R],[0BCS_REPMOD].[S]} DIMENSION PROPERTIES MEMBER_UNIQUE_NAME, MEMBER_CAPTION, PARENT_UNIQUE_NAME on 0 , {[0PCOMPANY].[000001],[0PCOMPANY].[000002],[0PCOMPANY].[000102],[0PCOMPANY].[000103],[0PCOMPANY].[000104],[0PCOMPANY].[000200],[0PCOMPANY].[000003],[0PCOMPANY].[000004],[0PCOMPANY].[000100],[0PCOMPANY].[000101],[0PCOMPANY].[000105]} DIMENSION PROPERTIES MEMBER_UNIQUE_NAME, MEMBER_CAPTION, PARENT_UNIQUE_NAME on 1 FROM [$ZBCS_OV12]WHERE{[0BCS_REPMOD].[N],[0BCS_REPMOD].[P],[0BCS_REPMOD].[R],[0BCS_REPMOD].[S]}{[0PCOMPANY].[000001],[0PCOMPANY].[000002],[0PCOMPANY].[000102],[0PCOMPANY].[000103],[0PCOMPANY].[000104],[0PCOMPANY].[000200],[0PCOMPANY].[000003],[0PCOMPANY].[000004],[0PCOMPANY].[000100],[0PCOMPANY].[000101],[0PCOMPANY].[000105]}*
The error is:
SOAP request failed with return message 2147483653 (Log not found (in main memory))
What to do with this message? How to understand what is the cause of the error?
The same query is working fine in MDX-test tool.
WBR, Dmitriy.

Solved myself, it's because the query used in my code have user input variable.

I updated my phone and it cleared everything on it and I don't have an icloud or itunes backup. Please help I need to get my pictures and information back

I updated my phone and it cleared everything on it and I don't have an icloud or itunes backup. Please help I need to get my pictures and information back

Sorry, but without a backup in iCloud or iTunes on your computer, your data is gone and can't be restored anymore.

Why we do not need sender agreement for Mail and SOAP adapter

Hi SDN,
I know, we do not need sender agreement for IDOC ,HTTP,XI adapters. As these three adapters will run in Integration engine of the abap stack.
<b>In our scenario if sender is other than IDOC or HTTP or XI .</b>
By Refering Sivamni's blog.
<b>/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
message will be pickedup by communication channel with the help of sender agreement and prepare XI message header by performing cpa cache lookup. then message will go to module processor etc.
<b>In our scenario if sender is IDOC or HTTP or XI .</b>
As these 3 adapters are run in Integration engine.
Doubt 1:
how the integration engine will create the xi message header like sender interface sender system name etc...
Doubt 2:
I believe SOAP and mail adapter will run in adapter engine.but i came to know that we do not need sender agreement and sender comm channel for these two adapters too...then how the XI message header will create...
Please do correct me if i am wrong
and throw some light on the same..
Appreciate your help....
Regards,
Reehan.

Reehan,
Thanks for pointing me to that link. Guess I was wrong .,But,let me try to put to you why you need a sender agreement for a Sender SOAP Adapter,
1. In the sender SOAP adapter , the Sender Interface and the Interface Namespace as provided in the fields Default Interface Name and InterfaceNamespace. The Name of the Sender Service is provided in the WSDL when you ceate the WSDL in the Integration Directory. So, as all details are available in either the Sender SOAP adapter or in the WSDL url you do not need a Sender Agreement. It is not obligatory but you can always create the Sender Agreement.
2. For the mail adapter , if you select the option XIPAYLOAD, you will have the option to mention the Interface Name and Interface Namespace under XI Parameters and so in this case as once again the details provided in the sender agreement are available in the Sender Adapter itself the sender agreement is not needed for the mail adapter when you have select option XIPAYLOAD.
If you have selected XIALL then you need a sender agreement.
Regards
Bhavesh

Soap Receiver Adapter - No Response Message

Hi, I've got the following scenario: Idoc - XI - Webservice. I've imported the WSDL from the .NET webservice and used the input and output messages in a syncronous interface. I've setup a SOAP Receiver adapter with the Webservice details. Everything is working fine when I call the webservice and the data is received 100% at the target system, but I am not getting ANY response back on XI.
RECEIVER SOAP ADAPTER Audit LOG:
2008-01-24 16:41:57 Success SOAP: request message entering the adapter with user J2EE_GUEST
2008-01-24 16:41:57 Success MP_LEAVE1
2008-01-24 16:41:57 Success The message was successfully delivered to the application using connection SOAP_http://sap.com/xi/XI/System.
2008-01-24 16:41:57 Success Acknowledgement creation triggered for type: AckNotSupported
2008-01-24 16:41:57 Success SOAP: completed the processing
2008-01-24 16:41:57 Success SOAP: continuing to response message 83638fb0-ca8a-11dc-b36c-00145eed9500
2008-01-24 16:41:57 Success SOAP: sending a delivery ack ...
2008-01-24 16:41:57 Success SOAP: sent a delivery ack
2008-01-24 16:41:57 Success The message status set to DLVD.
2008-01-24 16:41:57 Success Acknowledgement sent successfully for type: AckNotSupported
Has it got anything to do with the "AckNotSupported" type? Is "AckNotSupported" the default setting for the receiver SOAP adapter? If so, where do I change this setting?
When I call the webservice with the exact same input using a standalone tool, I get the response message back 100%. Any help will be appreciated.
Thanks
Rudi

Hey
you are confusing between a response and an acknowledgement.
response and acknowledgement and not one and the same thing.
response is basically used when you send some query to the receiver system and expect a set of value(s) for your query.for e.g sending a query to a Database(JDBC) or SAP system(RFC)
and acknowledgement is just a notification that the message was receiver by the receiver correctly,it does not returns you a set of value(s).
now coming to your question,ALEAUDIT IDOC is generated when an IDOC is posted,since in your case you are not posting and IDOC,instead your are sending it ,i m not sure if ALEAUDIT will be generated or not,one thing that will come to your rescue is that every receiver SOAP adapter expects a HTTP response(irrespective of you explicitly asking it or not).
a HTTP 200 means that messages were posted successfully,and HTTP 500 means application error,get this HTTP response and send it back to the SAP system,most probably you would need to use BPM for this.
Thanx
Aamir
Edited by: Aamir Suhail on Jan 24, 2008 11:26 AM

SOAP AXIS sender adapter response message

Hi all,
In our scenario a 3rd party app. is sending a request to our Sender SOAP Axis adapter. The message contains attachments and uses MTOM features. When receiving I have no problems. BUT when I sent a response I the SOAP AXIS adapter sents the attachmnt I received back.
Why does the AXIS adapter sents a response back with our attachment we received???? Any ideas? I tried to use a custom module to delete that part, but It cannot be edited. The modules input is just our normal message. Afterwards the attachment gets added...
Thanks

Not really sure about this, but have you tried to disable the Keep-Attachment option in the adapter (but if you're doing sync Axis comm., I don't think it would work as it would remove attachments when receiving them) ...
Chris

Need to get the name and the Site ID of a specific user using SharePoint Webservices

Hi,
I need to get the User's name by passing the Login Name using SharePoint OOB Web Services.
I need to pass DOMAIN\\Login ID and get the User's Info i.e. Name and the ID of a particular site.
I'm trying to use GetuserInfo:
$(document).ready(function () {
var soapEnv = "<soap:Envelope xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\" xmlns:soap=\"http://schemas.xmlsoap.org/soap/envelope/\">"+
"<soap:Body>"+
"<GetUserInfo xmlns=\"http://schemas.microsoft.com/sharepoint/soap/directory/\">"+
"<userLoginName>DOMAIN\\Login ID</userLoginName>"+
"</GetUserInfo>"+
"</soap:Body>"+
"</soap:Envelope>";
$.ajax({
url: "<http://SiteURL>/_vti_bin/usergroup.asmx",
beforeSend: function (xhr) {
xhr.setRequestHeader("SOAPAction",
"http://schemas.microsoft.com/sharepoint/soap/directory/GetUserInfo");
type: "POST",
dataType: "xml",
data: soapEnv,
complete: processResult,
contentType: "text/xml; charset=\"utf-8\""
function processResult(xData, status) {
alert("Status : " + status);
alert(xData.responseText);
console.log(xData.responseText);
But i get error stating that User does not exist.
Appreciate all your help.
Regards,
Sachin

Hi Sachin,
The following code for your reference:
<script src="http://code.jquery.com/jquery-1.11.1.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(function () {
var url ="http://sharepoint/_api/SP.UserProfiles.PeopleManager/GetPropertiesFor(accountName=@v)?@v='contoso\\administrator'";
$.ajax({
url: url,
method: "GET",
headers: { "Accept": "application/json; odata=verbose" },
success: function (data) {
var results=data.d.UserProfileProperties.results;
error: function (data) {
</script>
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to create Asynchronous request and delayed response Provider ABCS

Hi All,
I am using Jdveloper 11.1.1.5 and AIA FP 3.0
Whenver I am creating Asynchronous Provider ABCS through Service constructor, it asks for the wsdl in Callback tab. Would someone please help me in :
*1.* What wsdl we should provide in Callback tab
*2.* If I provide the EBS wsdl operation response. Then there is no call back in the BPEL process of the ABCS. Instead of that there is an invoke activity which is invoking the response operation of the EBS.
*3.* Does anyone tried to develop a complete Asynchronous (Req/Delayed response) AIA interface. if so please share with us.
Thanks
Sunil

HI Veeru,
Thanks for this quick reply. According to you suggestion I am following this design pattern to create the Async AIA Interface.
==============================================================================================
(1.Request) (2.port Type=ProjectEBS) (3.CreateProject)
Async BPEl Process ---------1-------> CreateProjectReqABCS---------------2--------------------->ProjectReqEBS----------3------------->CreateProjectProvABCS
(4.portType=ProjectEBSResponse) (5.CreateProjectResponse) (6.Response Message)
CreateProjectProvABCS------------------4-------------------------->ProjectRespEBS------------5--------------->CreateProjectReqABCS---------6----------->Async BPEL process
==============================================================================================
Would you please confirm these points :_
1. While connecting to EBS from ReqABCS I am selecting only PortType=CreateProjectEBS, I am not providing Callback PortType, Beacause we are using seperate Service to handle the response. Is this step is correct ?
2. Also while connecting to EBS from ProviderABCS i am selecting tType=CreateProjectEBSResponse, I am not providing Callback PortType. Is this is correct ?
3. In Requester ABCS test page on EM console there are two WSDL service showing. Which one to select while providing wsdl in ProjectResponse EBS while handling response message
Thanks
Sunil
Edited by: 856749 on Apr 23, 2012 12:47 PM

Need to get SOAP request and SOAP response message.

Similar Messages

Maybe you are looking for