Need to mention subject also in Invite Supplier User page

In Purchasing Responsibility there is Supplier User Management Section . Invite Supplier User page is there . We can enter email address there as well as Text .
Problem is we also want to enter subject there . Is it possible ??

Can any one Please suggest ..Its urgent ?

Similar Messages

  • ISupplier Portal-Register Supplier User

    Hi All
    After i Register Supplier User i get Confirmation that the password was generated and emailed to the supplier user but the Supplier user not receipt any e-mail .
    Does anyone know what workflow sends to Supplier that information .
    or what i can do to insure that the password sent to supplier user
    thanks
    Essam Essmat

    Essam,
    As far as remember - In the registry page (Invite Supplier user) , the field named 'Email address' is not the supplier email to which the notifications should be sent.
    This is used to define the user name in the system.
    Please check this it might be the reasn.
    Nira.

  • Project Actual Cost Line Items (CJI3) - Need Invement Profile Key also

    Hi All,
    We are trying to execute the report "Project Actual Cost Line Items" through Transaction Code CJI3.
    We need Invement Profile Key also in the out report of CJI3.
    Is there any Standard SAP report to get Invement Profile Key as well along with normal CJI3 output.
    Please let me know in case you find any such Standard SAP report.
    Thanks in advance for your help.
    Regards,
    Srinivas

    Hello Sreekanth
    Thanks for your input. Yes it is working now after posting cost under same CE as what I have maintained in Base of costing sheet on required WBS..
    I was under impression that the cost lying in cost center can be pulled out indepedantly on WBS through costing sheet  based upon percentage mentioned in overhead.However I am observing now that the cost posted on WBS is taken as base amount to calculate overhead.
    In my case, Eur 100 cost is posted under primary cost element 652100 on WBS and Eur 2000 cost is posted on Cost center under same Cost element Actually I am required to pull out some percentage of cost Eur2000 on cost center to WBS. However,
    currently it is taking Rs 100 (posted on WBS) as basline cost and calculating overhead over it and posting it to WBS again under overhead cost element.
    Can we handle this through costing sheet or for that Assessment distribution is must?  May I expect the answer.
    Best Regards
    Adwait

  • I have downloaded five hours of video of my band playing and have edited it down to two hours but I can't fast forward it or jump to the next song. what do I need to do. Also is there anyway to eq the sound before making a dvd

    I have edited five hours of my band playing and after burning a dvd it won't fast forward or go to the next song. what do I need to do. Also is there a way to add eq to the video before I burn it. (the bass is weak)

    Hi Steve,
    The following suggestions assume you are using iMovie '11 (but are also mostly applicable to iMovie '09 from memory - but not sure about the Equalizer).
    You mentioned in the topic header that you had edited the project down to 2 hours. In iDVD that is the maximum time allowed for a standard single layer DVD, including time taken for the theme and menus. Perhaps things are a bit tight, and you may need to shorten the project by a few minutes before exporting again for iDVD.
    Note that for the Best Performance setting the maximum duration is 1 hour. For 2 hours duration you need to use either High Quality or Professional Quality (the latter takes about twice as long to encode, as it does a 2 pass operation).
    In your iMovie project did you insert chapter markers for the beginning of each song? If so, don't place them within a transition. Also, don't insert a marker at the very beginning of the project - iDVD will do this for you automatically - all you need to do in iDVD is rename it. In case you aren't familiar with the markers, see this picture (just drag the marker onto the clip where you want the chapter to start, then give it a name in the marker box that appears):
    Regarding the Equalizer, in the iMovie project, double-click on the audio track to bring up the Inspector. Select Audio - you will see an Equalizer item. Use the Custom setting, or by clicking on the disclosure triangles (little arrow heads), you can choose from a range of presets. See this picture:
    Hope this helps!
    John
    Message was edited by: John Cogdell

  • I have the Photoshop Elements 11 and when I use the stamp effect the image becomes totally black. It used to have my line drawing in white, now, just a black image. I need the stamp effect. also, most other effects simply crash the program.

    I have the Photoshop Elements 11 and when I use the stamp effect the image becomes totally black. It used to have my line drawing in white, now, just a black image. I need the stamp effect. also, most other effects simply crash the program.

    Which operating system are you using?
    Some filters like Filter>Sketch>Stamp need to have two different colors for the Foreground and Background set in the toolbox.
    Press the D key to set the default toolbox color swatches to Black and White and then try the Stamp filter.
    If your using mac os x 10.9 or 10.10, then some of the filters under Filter>Sketch will crash pse 11
    They are Filter>Sketch>Comic, Graphic Novel and Pen and Ink
    Otherwise resetting the pse11 editor preferences might resolve the crashing.
    Go to Photoshop Elements Editor(Edit)>General, click on Reset Preferences on Next Launch and then restart the pse 11 editor

  • My ipad seems to now be using up the battery much faster. What do I need to check. Also seems to charge slow.

    My ipad seems to now be using up the battery much faster. What do I need to check. Also seems to charge slow.

    im not too sure about the slow charging, but i would recommend altering the way in which you use your ipad i.e turning your brightness as far down as possible, making sure you close all your apps etc... smaller things like that have a massive effect. my phone battery was awful at the start, however simply lowering the brightness has made it way more efficient and it has a much longer life.

  • I have a Mac purchaesd in India. Now i am travelling to USA. In India power is at 220V but in USA it is 120V (if i am right). What i need to do. Also what  type of plugs are used in USA. Type A,B,C etc.

    I have a MacBook Pro purchaesd in India. Now i am travelling to USA. In India power is at 220V but in USA it is 120V (if i am right). What i need to do. Also what  type of plugs are used in USA. Type A,B,C etc.

    All you will need is a USA adapter for your MBP power adapter since it will work in  electrical environments from 100v. to 220V.  It seems that a type B will be needed.
    en.wikipedia.org/wiki/Mains_electricity_by_country
    Ciao.

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • Can't Login to SharePoint as an invited External User / Can't Remove All Traces of External User with Microsoft Account

    Hi TechNet,
    I have an MS SharePoint Online (SharePoint Plan 2) team site, quite simple, one document library etc.
    I have successfully added all users (E3) within the organisation to groups, and permissioned correctly.
    I have added myself (separate organisation, also Office 365 E3) as an External User, and have access to the website without any problems by authenticating with my Organization account e-mail address.
    I have a single user (separate organisation, also Office 365 E3), who's setup is identical to mine (Also Office 365 E3).
    However, when this user is added as an External User, they are unable to login, and get "Sign In is not complete":
    That didn't work
    We're sorry, but [email protected] can't be found in the CLIENT1.sharepoint.com directory. Please try again later, while we try to automatically fix this for you. 
    Correlation ID: dc1f7f9c-092b-20b8-7b35-89348ba22f71
    Date and Time: 3/20/2014 7:06:55 AM
    URL: https://CLIENT1.sharepoint.com/
    User: [email protected]
    Issue Type: Partner User Invalid.    
    I then remove the user using the Site Collection, and using the PRofile Manager, and using Remove-SPOUser, and using Remove-SPOExternalUser. Which is great, he's gone. However when I go to add him back to a group, as soon as I type his e-mail address, it
    'Resolves' into his full name! If I have completely(?) removed him form the site, how is he being resolved? And therefore me trying to remove him to re-add him to try and solve the user/directory/auth issue is not working.
    Furthermore, upon clicking on said client's username inside SharePoint (after I've 'added him back' of course), his ID, in format: i:0#.f|membership|live.com#[email protected] has an entirely different e-mail address, his Microsoft Account! 
    I'm assuming he must have been already signed into his Microsoft Account when he clicked on the External User e-mail invite? If so, I clearly do not want this, how can I remove lal traces of his Microsoft Account, given that I have gone to the lengths as
    detailed above?
    I have already completed these steps: http://community.office365.com/en-us/forums/148/p/228263/709905.aspx
    Some possible further reading regarding Microsoft ID's and Organization ID's:
    http://sergeluca.wordpress.com/2013/09/23/sharepoint-online-and-external-users-this-invitation-has-already-been-accepted-with-another-account-bug-or-feature/
    Please let me know if you need any more information regarding this issue, and thanks in advance to anyone who can shed some light on this situation for me and anyone whom encounters it in the future.
    Regards,
    Evanly.

    Hi Scott,
    Thank you so much for taking the time to read and respond to my issue.
    Certainly, it makes sense that regardless of where the invitation it sent, the user would authenticate with their Microsoft ID.
    In my case, I want the user to authenticate using their Microsoft Organisation ID, that they use for their seperate Office 365 account.
    This is the way I was able to log in, and worked great. With my client, they are unable to access Sharepoint because once they sign in with their Microsoft Organisation / Office 365 ID, they are told they are not in the directory, because their Microsoft
    ID is in the directory and it doesn't match up.
    I am simultaneously trying to 1) Remove all traces of this users Microsoft ID, which so far using the above steps, has been unsuccessful; and 2) Invite the user using his Microsoft Organisation ID, and have him authenticate with that (which is proved to
    work, as my account uses this).
    Looking forward to any more suggestions. Thanks in advance!

  • How to find the supplier user who done the confirmation

    We have the setup- Supplier can confirm either through Web UI or by uploading a XL file into SNC.
    we have several supplier user account per BP, Say (user1,user2...user5 - BP 2000010). Now i need to find which user have made the confirmation and Published.
    I knew its possible to get that information through PO history details but its possible only for those confirmations which are made through Web UI.
    In my case - confirmation is done by file upload
    Distribution status - Published by Supplier
    Changed by - PIREMOTE (system name).
    Thanks in advance
    regards
    Vinoth

    Hi Vinoth,
    I assume that the file transfer is done via File Upload in Web UI.
    If you would like to which supplier user has uploaded the file / done the confirmations, you can ask the supplier user to create his own upload profile and then upload the file.
    Once this is done, in PO details you would get to see "Changed By" as Supplier user. You can also check the same thing in "PO History".
    This may not be the best option but will met your requirement.
    Regards,
    Sandeep

  • Supplier users are not receiving notification

    Hi - I am implementing iSupplier portal.
    When I try to invite any supplier user, no notification is sent to given e-mail ID.
    Please provide the pointers if I am missing on any set up part.
    Thanks in anticipation.

    Please post the details of the application release, database version and OS.
    Was this working before? If yes, any changes have been done recently?
    Is the issue specific to iSupplier or to all notifications?
    Can you find any errors in the Workflow log file?
    Please see old threads for the docs you need to refer to troubleshoot the issue.
    Users not receiving notifications
    http://forums.oracle.com/forums/search.jspa?threadID=&q=Users+not+receiving+notifications&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • SUS - MM Scenario: notification mail not sent to all Supplier Users

    Hi,
    we're in a SUS-MM scenario and we publish Purchasing documents (PO and/or SAR) to SUS portal.
    The notification mail for new published documents are sent only to the e-mail address of the Supplier (imported from SAP to SUS) which is in the SAP Supplier Master data. But if the Admin supplier creates other users for the supplier (F1 / F2 / F3), the notification mail for new published PO/SAR are not sent to the mail address of F1 / F2 / F3 users. Is it the standard behavior or is there some missing customizing setting missing?
    Our customer wants that notification mail are sent to all the mail addresses of the Supplier Users.
    Has someone had this kind of requirement? and, if it is not achievable via standard customizing, which could be the right solution to meet this requirement?
    Thanks in advance

    Hi,
    This is a standard SAP process which SAP has provided,
    The other way is to develop a custom program,
    1) Select the Supplier.
    2) Check the available contact persons of the Supplier.
    3) When a document is created in ECC (Hope you are in MM-SUS), select the list of contact persons for Supplier. (I assume need a RFC FM to develop to SUS)
    4) Send a e-mail to all users linked with this Supplier.
    You can find the linked Contact persons in BP transaction and Table BUT000.
    Please change the Status of the Issue once your problem solved, other will get benefitted. If possible post the soulution.
    Thank you,
    Anil

  • Can't access my user profile with the supplied user information from Oracle

    I can't access my user account at oracle.com with the supplied user name and password supplied by oracle email.
    user = [email protected]

    I have deleted all cookies and files, can you please give me some feedback asap. I am registered on an Oracle event that I need to be able to unregister but I can't do it since I can't access www.oracle.com.

  • We need to restict doc.type sa for specific users only

    Hi,
    we need to Restrict document type SA for Particular users i.e
    1. they Should not allow to post SA document types .
    2. But they allow to view the documents(SA types only)
    Regards
    Ganesh

    Dear Tarimela,
    1. In transaction OBA7, you should fill up the field for all the
       document types which you want to control.  If it is left blank, then
       all the users will be able to post document with that document type.
       Hence, if user A is authorised to post to document type X and in
       the configuration of document type Y field authorisation group is
       left blank, then user A will be able to post document with document
       type Y.
    2. Also you need to enable authorisation check in transaction PFCG and
    need to assign the authorisation group in the profile.
    3. I would recommend you to go through SAP notes 198238 and 150496 for the
       purpose of your information.
    I hope this can help.
    Mauri

  • Looking for screen to change Supplier User Registr.. workflow process name

    Hi,
    The question relates to Supplier User Management.
    Does anybody know if there is a page where you can pickup the workflow (the shipped one has internal name POS_REG) process name for supplier registration?
    Thank you.
    Anatoliy

    Hi Bala
    What enhancements were you adding to the Workflow Reassign/Delegate feature, which included being able to add comments? A good idea is to look for any differences between how workflow implements the reassign feature, and your customization.
    Also, make sure you only use the Public documented PL/SQL APIs and do not update the tables directly to ensure no Support or Upgrade Issues.
    Cheers
    Mark
    I am using Stand alone Workflow 2.6, In my workflow process
    which is an Issue tracking system which is working fine. On Enhancement I would like to create my own RE-ASSIGN function which will, Change the ownership of an issue totally to other user.
    For this I Created a package(CHANGE_OWNER.CREATE)which will show list of Users and Comment field(Just like Re-Assign).
    Here user can pick other user, and add comment,
    once submit for that Item key I am updating the workflow notification table so that paritcular issue ownership will be changed.
    In my workflow process I created a lookup code called "Change Owner". On click of Change Owner it will call the Function
    in workflow process which will call CHANGE_OWNER.CREATE, here
    the workflow process supposed to wait and get the User to be
    changed. BUT THE PROCESS IS NOT WAITING, IT JUST DISPLAYED THE
    SCREEN AND CONTINUED THE WORKFLOW PROCESS. I WANT THE MY
    WORKFLOW PROCESS TO BE ACT AS RE-ASSINGN BUTTON WHICH WILL WAIT
    FOR THE USER INPUT.
    HOW TO DO IT.
    Thanks
    Bala.

Maybe you are looking for

  • Errors in emoms.log file

    Greetings, I have been poking around a bit trying to better understand some problems and how the OEM works. In the Middleware/gc_inst/em/EMGC_OMS1/sysman/log/emoms.log file I see numerous occurrences of the following error - 2013-11-18 07:09:56,740 [

  • Update to 4.1 now

    I haven't updated to 4.1 yet as I'm waiting for the Downloading "traffic" to die down. Would it be fine to update to 4.1 later tonight (when I get off work) or the weekend? Can anyone tell me if they notice a difference in 4.1 Message was edited by:

  • No time refresh on OSX Mountain Lion

    i lately noticed that on my iMac running Mountain Lion (properly updated), the time display in the upper right corner doesn't get refreshed anymore. i have to click on the time in order to get an update. a real annoyance, since i've already been clos

  • Iphoto won't import from iPhone at all

    I can't figure it out.  At first it said there was a file which wouldn't allow it to continue.  I do have iCloud photos turned on but I want to back up all photos onto my hard drive so I have them securely elsewhere too.  Suggestions?  Usually I back

  • Beta changes missing in final LR4

    What happened to all the cool Develop module changes that were in the beta, like being able to paint in white balance, etc. with the Adjustment Brush? White point? So far as I can tell, the Develop module looks identical to LR 3.5.