Need to print in german language in output.

Hi,
I need to print my vendor address and delivery address in german language (fetching data from database table) in my form.
How I can achieve this.Please help,
Regards,
Himanshu

Hi,
So i think you should to call fetch the data when your are about to print a form..
best way would be to call a subroutine in a script editor.. this routine will fetch all the data from database table ,, and it wud just like a ABAP form ..
Pls follow the steps,,
1. Create a Z program in SE38, declare all the structure related to data fetching in that,, perform all data selection,, fill these data structure..
2. You should to paste your code within the Form and endform .. Like below:
REPORT Zcall_in_script .
form data_fetch.
all the data retreval part .....
endform.
3. Now in your script ,, to call this form use below syntex,,
/:   PERFORM data_fetch IN PROGRAM Zcall_in_script
/:   USING &w_value1&
/:   USING &w_value2&
/:    CHANGING &w_value3&
/:   CHANGING &w_value4&
/:   ENDPERFORM
4. here you can have the w_value3 & w_value4 as your fetch value .
Edited by: Lokesh Tarey on Jul 26, 2010 2:10 PM

Similar Messages

PLS HELP!!! Need Navi 3.06 german language files (...

Because of very limited HW in holiday I need a direct download link for the 3.06 german language files (with streestnames) for driving and walking.
I have Internet connction, but OVI suite does not run because of very limited HW.
I need the direct download link to the language file to download, tranfer to mobile and install.
PLEASE HELP!!!
Robert
Solved!
Go to Solution.

@Robert_1a
Welcome to the forum!
I know that for English with street names it uses English Female, but not sure if same for German equivalent.
German_TTS
German_F
German_M
Happy to have helped forum with a Support Ratio = 42.5

Invoice needs to be printed in cyrillic language along with english language

Hi All,
We have been printing invoice only in english lanuage for Kazakhstan ,now they need it printed in cyrillic language also.that is they will have two invoices one in english and anothr one in cyrillic.
Can you please guide me through the configuration steps
1.Do i need to create a language specific scripts for this ?
2.Which all config need to be done from SD side ?
Thanks
Manaf

Hi Manaf,
If you want to have multi language invoice layouts then you have to upload the master data like sales org details, customer details in both the languages ( English & Cyrillic languages)
1) You also need to get the Cyrillic language details from your user for hard-coding the details in the invoice layout.Ex- INVOICE, CREDIT MEMO, DEBIT MEMO etc.
See below table shows for French language
Name in English
Name in French language
Invoice
Facture
Date
date
Due Date
redevable le
Account
compte
Terms
terme
Bill To
facturé à
Period
periode
Desciption
description
2) After getting the details in Cyrillic language and we have to work with technical consultant and give the logic of fetching the data from different tables.
3) Now, in billing document header output if you input language key as English(EN) then system will pick the English invoice layout or if it is CY then Cyrillic layout will be picked accordingly.
Regards
Anand.G

How to get output of PO in german Language which uses script MEDRUCK

Hello Experts,
I need to Print PO in German when I set language as DE.
Please Help.

Hey this should work....
Do a select on the table NAST and get spras from NAST...
This spras is the same one which u find in the Language field
of the MESSAGEs tab in ME23n...
When you call ' OPEN_FORM'
PAss this spars which u fetched from NAST as language parameter in this function module...
Eg:
sUPPOSE l_v_spras conatins spras from NAST
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION                       = 'TX'
ARCHIVE_INDEX                     =
ARCHIVE_PARAMS                    =
DEVICE                            = 'PRINTER'
DIALOG                            = 'X'
FORM                              = 'ZSCRIPT '
LANGUAGE                          = l_v_spras.
Thanx,
Navin...
Edited by: NAVIN FERNANDES on Apr 15, 2008 10:09 AM

I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

Go to the bottom of the page, click the flag, then select your country.

Need to print same outputs at different printers

Is there any way we could have the output directed to a different printer. A sales order confirmation output needs to print at printer ABC for user Sam, and printer xyz for user Jude. What configuration change would allow printing of outputs at user specific printer.
Any suggestions

if it is printing immediately , yes it is possible. In the user profile( T Code SU01) have default printer assigned , which ever you want to print for specific user and click on output immediately. when the order is saved then it will print to the printer maintained in the user profile.
If batch program , then itwill be difficult
Regards
Sai

I cannot choose language after update - only" English" and" automatic" is possible on preferences. I need german language.

Hi ,
who can help me? Since update I cannot choose the german language on preferences again.Only English and automatic is possible.Thank you for help.

I managed to get it ^.^ Here's what I did:
Code:
sudo apt-get remove --purge firefox
Then I unpacked the Japanese edition:
Code:
tar xvjf firefox-9.0.1.tar.bz2
I couldn't open Firefox using the terminal, so I went to the folder and opened it from there. The Firefox icon no longer appears, and I can't figure out how to change the shortcut in my menu lol But it's definitely the Japanese version, and all of my bookmarks, plugins and preferences were saved, so everything else will come eventually ^.^
Good luck!! I hope this is helpful ^.^ *bow*

Printing multiple format/language in one submission

I'm new to XML Publisher and want to bounce my understanding off of someone to see if I'm understanding things. I have been requested to have one concurrent manager request submitted that will print all of the days invoices in the proper language and format.
Following is my understanding - please verify:
1. I think I need a RTF template per language/format. I can register one "Template" but assign multiple RTF formats based on Lang/Territory.
2. I could allow the user to submit one request and it would execute a PL/SQL procedure that would submit multiple XML Report Publisher requests with the appropriate language and territory parameters so the correct RTF is used.
3. The part I'm not so sure about is how to generate the XML Data. I'm thinking that I would have to actually submit a language/territory specific XML Data generation process before the XML Report Publisher process and feed that request id to the XML Report Publisher process.
4. Question: is it wise to use the existing Oracle Report with output type XML to do #3 since it is already built and has all of the invoice logic in it?
Any and all feedback on the above is greatly appreciated.
Carl

You can use the existing report logic to get the data out in XML format as you mentioned.

I need more INPUT (not MENU) languages in my E90!

Though E90 Communicator is awesome in majority of functions, usability and comparatively perfect in production quality, it lacks some features that I as business-user definitely need.
The most disappointing issue for me is the language issue. While the "normal" phones have 6 to 8 languages pro firmware/product code, the E90 has only 3!!! (Maybe 4 in APAC region but i do not care.)
I'll try to explain shortly. As a businessman who lives in Germany and is a native Russian-speaker, I have a LOT of partners/clients/friends who do prefer to have a communication profile with me in Russian. I have almost the same amount of people with whom I need to communicate in German or French. The tragic truth is that I cannot approach this with the actual firmware situation on E90.
If I would buy my Nokia E90 in Russia, I would get the predefined languages of English, Russian and Ukrainian. That is nice, but in this case I cannot write in German as it should be written, saying with Ö, Ä, Ü, ß and so on. I also could not use some of the French special characters. If I would use E90 only as a SMS machine, it might be OK. But I use it more likely as a travel PC replacement the device pretend to be, so I use e-mail and document editing, where the lack of those characters are intolerable.
Besides all, I live in Germany and am a client of German service provider, so why should I probably buy the device outside of Germany? So think I and so I doing, saying I renewed my service contract and bought the E90.
In German firmware I got another three (!!!) languages: German, English and Turkish. Wonderful. I may speak out about the pure discrimination from the Nokia side: in Germany we have the same amount of Russian speakers as Turkish fellow ones, both about 8,000,000 persons each. ;-) So why Turkish and not Russian, Italian or French? Every of those "communities" has equal rights, am I right?! Hei, Nokia! Do you hear my voice?!
Is it really so hard to understand, that an ULTIMATE BUSINESS SOLUTION as E90 definitely would be preferred by the people, who really use it - really intensive - as a communication device?! Is it really hard to understand, that thousands of them would get e-mails and documents while on the road that definitely need to be urgent answered some other language than 3 preinstalled?! Should I change the firmware of my phone every time I need to answer e-mail in French or edit the financial contract for my Russian partner?!
Ridiculous and disappointing - what else should I say?! Especially because I know, that the situation as easy to fix from the Nokia side as a single mouse click.
I am sure there are people reading and writing to this Forum who needs for example Chinese Mandarin and German, or Hindi and Farsi, or Arabic and Spanish simultaniously. There is no way to understand why it is impossible to choose the INPUT languages - I do NOT speak about the MENU languages and never pretend to.
So, because this Forum is Nokia's piece of land and Nokia has kindly allowed us to cry out here what I do really appreciate, I want definitely get the answer to following questions:
1) Is it possible to add some INPUT (once again - NOT menu, just INPUT) languages to E90 firmware?
2) If yes, when?
3) If not, what is the reason? The reason - please, no "technical excuses", because I am not that stupid, OK? ;-)
We are living in such a damn globalized world, aren't we? So let's be really globalized and let's help us ourselves to get out the most from this.
Thanks to all for listening.

Since Windows 98 is absolutely not a problem to add ANY input language in ANY localized version of the OS. I do know that Symbian OS has at least the same flexibility options.
Once again: I do not pretend to have any other MENU language - I simply do not need it. But the possibility to choose more INPUT language is simply and quickly to add, that is what I am asking for.
Maybe your statistic research is right, I do not want to argue with you. More than that, this is exactly I expected as an excuse option: "Marginal request". But no, it is not. The device would probably have higher customer interest when the free input would be represented.
Your advice to use laptop instead of E90 is highly appreciated, but it is not unique enough to be accepted "as is". ;-) The idea of E90 as well as previous communicators was to give the customer an option to leave her/his laptop at home and make a 1 or 2 day business trip as lite as possible in every meaning of the word "lite". I have 2 laptops already, 1 Panasonic for traveling and IBM Z61p Workstation as a desktop replacement. I should say that Panasonic, while being one of the best travel-oriented devices on the market, with its almost 2 Kilo travel weight and about 1 minute power-up/power-down time is completely insufficient as a communicator replacement. In addition to it you need a businesscard-scanner and a digicam, you are constantly out of power and so on. It is or will be the same story with UMPC. The only option until now was HTC/Qtek 9000, the most powerful and well-equipped device on the market. But it is completely useless as a phone and its camera is a disaster, so I switched to E90 because of its awesome usability as a phone, a digicam and as a communicator simultaneously just because I HATE to carry on 12 hours a day here and there a 5 Kilo bag with laptop, phone, camera, cables, batteries and other damned stuff around. I am just SICK and TIRED of this and I dreamed about the device that can make free from all that - for YEARS!!!
I remember my conversation with Nokia people at its CeBIT Stand in late 1990-es - the concept was already here, but the materialization of my dreams took Nokia R&D almost a decade. And now, when it is already in my hands, it lacks such a damn little thing to be as perfect as possible! ;-)
I am not that crazy - "perfect" does not mean really perfect. Of course there are and there would be minor and major bugs with later fixes and improvements. Because of the possibility of fixes and improvements I insist on one of the most critical for me. I understand as well, that it needs neither additional research nor hardware changes. All you need to to do is a little software module to be added and/or replaced. The Occam Razor Rule is still in my mind. ;-)

I have a brochure I need to print. When viewed on screen it is pixelated, however when I change to presentation view it is fine. I need to print on presentation view. How do I do this?

I have a brochure I need to print. When viewed on screen it is pixelated, however when I change to presentation view it is fine. I need to print on presentation view. How do I do this?

Sounds to me more like you have the Display Performance set on Typical rather than High Quality Display. Unless there is a problem with a missing or out-of-date link, the display in ID has nothing to do with output quality -- all of the image data is used for output.

Need to print report imediately

i need to print the report output immediately i am pasting some code which i am having problem , in job_open function module exporting parameters are gettting problem.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
        EXPORTING
          mode           = 'BATCH'
          report         = l_repid
        IMPORTING
          out_parameters = l_parms
          valid          = valid.
      IF valid <> space.
        CALL FUNCTION 'JOB_OPEN'
          EXPORTING
            jobname = my_job.
   SUBMIT l_repid VIA JOB 'MY_JOB' NUMBER jobcount TO SAP-SPOOL WITHOUT
   SPOOL DYNPRO SPOOL PARAMETERS l_parms.
        CALL FUNCTION 'JOB_CLOSE'.
      ENDIF.
*Sending the print parameters to this.
      CALL FUNCTION 'GET_PRINT_PARAMETERS'
        EXPORTING
          destination    = 'LP01'
        IMPORTING
          out_parameters = l_parms
          valid          = valid.
      IF valid <> space.
        NEW-PAGE PRINT ON PARAMETERS l_parms.
      ENDIF.

Hi!
*Sending the print parameters to this.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = 'LP01'
immediately = 'X'            "<<< add this line - immediate print
NEW_LIST_ID = 'X'     "<<< add this line - new spool request
IMPORTING
out_parameters = l_parms
valid = valid.
Regards
Tamá

Regarding Invoice and Payment slip both needs to print sub sequently

Hi Guys,
i have problem with smartform ,
the requirement was ,
invoice and payment slip both i need to develop using smartforms,
the thing is invoice will print on white paper(Portrait) and
payment slip will print on pre - printed paper (landscape) ,
subsequently it needs to print one invoice and payment slip for that invoice and
another invoice and payment slip like this in the sequence it needs to print .
this would be done by overnight job scheduling ,
how could i do this ,
what about output types and how can i proceed with technically please guide me .
urgent requirement ..help me out this .
Thanks & Regards
Vijay Kumar Reddy
+91-9789098418
[email protected]

Hi Dewang,
I have a different situation, I posted SD request at contract account level posted using FPSEC1.
Since the contract account is for purpose of Aggregation, I did a aggregated posting then when I prepare a print doc for the same using EA10_AGGRBILL it is not picking up the security deposit request.
I have maintained the necessary entry in Item Selection in Account Maintenance/ Define Sub-Items for RF clearing type.
Please advice.
Thanks
Satyajeet

How to translate std. ABAP report in german language to English in SAP

Dear All,
How to translate std. ABAP code in German language to English in SAP ?

Hi,
code does not need to be translated.
Data elment descriptions, documentation, text elements, etc. can be translated in the transaction se63.
Also you can translate almost each single object in the editor in the menue goto-translation.
Regards,
Gianpietro

PO Printing in Dual Languages

Hi,
I have a requirement wherin i need to print PO in Dual Language.
Like
Lets Say If i Print Purchase Order in French on the First Line I should be printing the same below it in English!!! and the same applies to the complete PO.Hence if anyone who knows either of the language should be able to understand the PO Content.
Regards
Shrini

Check this threads,
PO Print out in different language
Re: PO in foreign langauge

German language to English language Change.

Hi Friends,
Right now iam working in german language.when iam login to english language test and production systems showing
NO TEXT FOUND.How to rectify this problem?bcoz i dont know german.so i need to work on english version.How to transfer all the data from german to english?If any one have documention send to [email protected] for ur kind reply.

HI
your question is not clear, As far as i understood Try language conversions with SE63
Translations -
>short texts---> and here u hve all the varitries
Regards,
Mahadev Shetty
Pl reward points if it is useful

Need to print in german language in output.

Similar Messages

Maybe you are looking for