Need to show the Condition amount or percentage(KBETR) in display mode.

Hi,
i need to show the Condition amount or percentage(KBETR) in display mode for VA02 transaction based on the condition type. the KBETR in the table control. so how it will become in display mode?
already i tried with this code.
in MV45AFZZ form userexit_field_modification.
case screen.
when screen-name = 'KOMV-KBETR'.
read table xkomv with key kschl = c_xr1(XR1).
if sy-subrc = '0'.
SCREEN-INPUT = '0'.
endif.
in debugging mode the condition is satisfying but not modifying the screen.
can anyone help me . please it is urgent.

Hi Praveen,
See in Exit 'LV69AFZZ' and subroutine 'USEREXIT_FIELD_MODIFICATION',
code should be like this
if komv-kschl eq 'your condition type'.
    case screen-name.
      when 'KOMV-KBETR'.
          screen-input = 0.
    endcase.
endif.
For header level conditions you need to use "form userexit_field_modific_kopf"
try it.
i hope it will solve your problem.
ENJOY SAP.

Similar Messages

I just downloaded itunes 11.. and now i cant find out how to display duplicates and also it doesnt show the total amount of songs in my library...anybody know..???

I just downloaded itunes 11 and now i cant find the display duplicates..and it doesnt show the total amount of songs in my library..anybody know..??

Two Windows scripts to make playlists of Duplicates and Exact Duplicates. Use shift-delete to remove selected tracks from the library as well as the playlist.
There is also my DeDuper script if you don't want to do it by hand. Please take note of the warning to backup your library before deduping. See this thread for background.
tt2

Summary filed to show the total amount

Hi ,
Version : Jdeveloper 11.1.1.5
Table : Revenue ( Columns - RevId ,InAmount, OutAmount)
Based on the Table i Created Entity Object and Based On Entity I Created View Object (RevenueVOW)
I Created one method --> RevenueVOW to show Create Mode and 4 new Records to show
how i will create summary field to show the total amount on InAmount
( In forms and reports we will create formula column)
Thanks
shk

HI,
Did you try with groovy expression
Check
Sum of field in af:table

Need to calculate the monthly amount based to the annaul salary

Hi Expert,
I need to calculate the monthly amount based to the annual salary.
Some countries use a multiplier more than 12 to calculate the annual salary (e.g : 13,14 ...).
My problem is to calculate the monthly increase.
The increase amount is on the annual salary but for the monthly increase, normally, the system divides by the mutliplier.
But some countries would like calculate these amount on 12 and not the real multiplier.
So, could you please tell me there are user-exits or other to make this ???
Thanks in advance,
Virginie

Hi Virginie,
Check both feature PFREQ (Edit with transaction PE03) and user-exit corresponding to enhancement PARA0001.
rgds,
Carlos.

I need help with the conditional build tag option RoboHelp 10

I need help with the conditional build tag option. I want to apply CBT to content in a topic. I looked at the Help topics and believed that I applied the feature correctly. Howver, it is not working as desired. In the 2nd sentence below I want the text highlighted in blue to only appear for the printed output and the text printed in purple to only appear for the .htm /online output. Please help.
There are common tasks used to manage the folders in the Navigator and the folders
in the BBS Folders Viewer Grid. For more information on these common tasks see Help
and Support in Success Enterprise. click the links below.

Hi there
Using tagging is a two part process.
Part One
You create and apply the tags to the information you wish to control.
Part Two
You create a Build Expression that is used when you generate your output. The Build Expression typically reads something like: NOT Tag1 (or whatever your tag name is)
Then when you generate and use the Build Expression, the information tagged is not included in the build.
Cheers... Rick

In sales order for the condition type MWST, **Tax code** is displaying wron

Hi
In sales order for the condition type MWST, *Tax code* is displaying wrongly at header level i.e. FF instead of AO (under account determination tab)
AO tax is 0% but for FF it is 19%
I have checked with the Access sequence it is picking access 08 correctly according to this it should show AO in tax code field for MWST but it is not so..
There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
Even if I consider material tax classification and customer tax code should not be FF because tax code FF is not maintained for the combination of access sequences for condition type MWST
Please help me.
Rajendra Prasad

Dear Rajendra,
There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
Definitely material Tax classification will influence to determine the Tax code.
-->So Make sure that customer and material master having proper tax classification indicator.
-->Have you Update the price after changing the tax classification in the sales order.by going to item dat -->condition tab then click on Update push button bottom of the conditions screen.
-->Once again the check the condition record maintanence also for your MWST access sequence.
I hope this will help you,
Regards,
Murali.

Need to show the images in calculated column based on the condition in sharepoint 2013.

Hi ,
I'm working in sharepoint 2013, In this i want to show an image in calculated column based on the condition, but image is not showing .
In sharepoint 2010 its working with help of javascript in content editor on the same page. Same thing i tried in SP 2013. but doesn't work.
Could any one please give proper solution for this?
Thanks in advance.
by,
Siva.

Hi please provide the JS you have used in the content editor as well as the calculation for the column so we can better understand what's maybe differs?
Blog: chrisstahl.wordpress.com Twitter:
@Cstahl

Po list showing the total amount with advances given & open GR quantity

Hi Gurus,
My client need to know the list of total p/os showing its gross total amount only (& not with the line items) with the advances rendered to them & its open GR quantity against total qunatity mentioned.
I hv tried in ME80FN, ME2N, ME2L ME2M..etc and all other reports but the system is showing the same with the line items. Kindly advise.
Regds
Prashant Bijutkar

Prashant,
All three informations will not be available in one report(gross total amount not with the line items and the advances rendered to them & its open GR quantity against total qunatity mentioned).
You have to dovelop this report. please take help from technical consultant.
One more thing the open GR quantity will always at PO line item level not at header level.
Regards,
Manish

My ipad is showing 7gb of storage being used on photos but there's no where near that many pictures! How do i get it to show the correct amount of storage available?

My ipad is showing 7gb of storage being used on photos but there's no where near that many. I turned off photo stream but nothing has changed yet. How do i get it to display the correct internal usage now that photo stream is off? I also thought that icloud used another form of storage outside of the internal storage for photos, so im not exactly sure why the photos were ever in my internal storage to begin with. Does anyone know how that happens, or how to correct this problem? Im also trying to sync my ipad with my computer hoping that'll help, but nothing so far, its just taking a long time to back up.

If you are syncing now, that may correct the incorrect storage reading - assuming that it is incorrect.
You can also try something like this. While the iPad is still connected to iTunes - but after you sync - go into the Photos Tab in iTunes and toggle setting for Sync Photos From. Uncheck the setting and then check it again. See if that affects the capacity bar to show the correct storage amount.

If I add a row to my spreadsheet, how do I get the footer cell to show the last amount in the table automatically?

Balance Forward
$0.00
Date
Code
Check Number
Transaction/Description
Deposit
Withdrawl
Ending Balance
I am able to set up the Ending Balance to show the value of the cell right above it as long as I dont need anymore rows. If I add a row the value of the ending balance is stuck on the row or rows above the newly addd ones. All of my other formulas contiune on when a row is added, Is there a formula that can be added so that when a row is added the ending balance value moves to the last cell in the row?

Cobb425 wrote:
Thank you badunit for your responses and help. Jerrolds formula worked for me a little bit better for what I was looking to do. Thank you again for your help
Whatever works best for you. Jerry's formula assumed your table might not be totally full, that there might be empty rows at the bottom. Mine assumed there were no empty rows; it gave the value of the cell directly above it, as you asked. With Jerry's formula, be sure you enter your data in order by date or keep it sorted that way to ensure you get the correct "Ending Balance". If your last row does not have the most recent date, the formula will return the balance from a different row.
I don't see the advantage in Jerry's "Balance Forward" formula over the simpler one I provided.

Need to show the text as 2009 - 10

HI,
I am enter the fiscal year value as 2009 at the run time. how to show the text value as 2009 - 10 on the same report.
Is it possible without creating "Customer Exit" ?
Please help me ..
Thanks and Regards
Rajesh

HI ,
I created 2 text variable for 2009 - 2010. 2009 (ZYEAR1- Replacement path) is populating from the year variable (ZFY) which I resticted. For pupulating 2010 (ZYEAR2 - Customer exit) I wrote a customer exit. I checked in the customer exit it is showing 2010, but it is not populating in the variable screen...
WHEN 'ZYEAR2'.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
DATA: ZNUM(4) TYPE N.
     IF I_STEP = 2.
       LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'ZFY'.
          CLEAR L_S_RANGE.
          L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(4).
          ZNUM = L_S_RANGE-LOW.
          ZNUM = ZNUM + 1.
          L_S_RANGE-HIGH = ZNUM.
          L_S_RANGE-SIGN = 'I'.
          L_S_RANGE-OPT = 'BT'.
          APPEND L_S_RANGE TO E_T_RANGE.
          EXIT.
        ENDLOOP.
     ENDIF.
I placed in the text as &ZYEAR1& - &ZYEAR2&.
Plz suggest me..
Thanks and Regards
Rajesh

Rate (condition amount or percentage)

Hi All,
We need to change the rate from fixed value to %ge value for 5000 Articles(Materials).
For individual articles we were doing through the transaction VKP5. How can we do in mass.
Regards,
Madhukar

Hello,
perhaps I didn't understand well your requirement or the scenario. But can't you run transaction VKP5 for all the 5000 articles you need to update price for?
Let me know.
Best regards,
Andrea

I need to show the date of a file

I tried to take a screenshot with command control shift 4 click and drag which would include date created and a thumb. I select the area, hear a
good click, but no save window. Can it be done or should I give up?

Nini Tjader wrote:
Screenshots has nothing to do with Bridge unless you mean taking a screenshot of something IN Bridge that shows the thumbnail and date etc from within Bridge…
Even in that case, the screen shoot of any Bridge window or panel is taken by the Mac OS, not by Bridge.
This screen shot of a thumbnail being displayed by Bridge in the Bridge's Content panel was created by the Mac OS (Command+Shift+4).
Wo Tai Lao Le
我太老了

I am new to Macs and, although I like it, I still don't understand it's behavior. When would you need to provide the administrative password at boot time? Safe Mode?

Background...
I joined the Mac bandwagon about 2 months ago. I am still getting used to it, but like it so far. Last week, I activated a new Iphone on my Imac. I needed to key in my userid and password. 3 days later, my itunes account was hacked into. My itunes information was scrambled. My itunes email, home address, and password were changed. Also, they didn't use my credit card which was attached to my account to make any purchases (they deleted my card and put someone else's card on my account to buy $100 worth of gift cards). I didn't receive any emails from Apple that my password, or email were changed, but I did get 2 receipts from the Itunes Store identifiying the purchases. Apple support fixed everything, but couldn't offer any explanation on what happened, other than to say my account was "modified". I don't like coincidences.
I freely admit that I didn't do enough to protect my login credentials as I used the same userid and password on multiple sites (since corrected). I still don't know how my account was accessed. I started to wonder if there may have been a key logger installed on my Imac without my knowing it. I am pretty careful with installing software and have purchase about 15 applications, all either from the itunes store, or from other reputable sources. I have never made any in-app purchases.
I understand that to install a key logger you would need to supply the admin password, which brings me to my question....
About 4 weeks ago, my wife was using the Imac on facebook. While she was there, the Imac experienced a hard crash. We had to do push and hold the button on the back of Imac to get it to shut down and reboot. When it came up, it required the admin password, and dropped me into a mode where it wouldn't recognize the external disk drive which was attached via USB. I needed to restart the machine and everything appeared to be normal. I assumed that this was Apples version of "safe" mode, but now I am not so sure. Could a key logger have been installed during this event? Is this expected behavior after a hard reset?
I have McAfee for Mac installed and it hasn't detected any threats, but McAfee is pretty wishy-washy on it's ability to detect key loggers. I am thinking about Macscan or Little Snitch. I would do a reinstall of the OS, if I only knew how.
Any help?

your itunes accoutn have nothing to d with your computer
you can go to any computer with internet access in the world and
login into your itunes account if you have the appleID and password
the itunes account is placed on apples itunes servers

Delivery cost condition type in PO coming as display mode

Hi Experts,
In my Purchase order having delivery cost condition types, for ex freight. For this PO i have done Goods receipt. PO all the delivery costs are showing in display mode. i have reversed the Good receipt.Again also all the delivery costs are showing grey mode in PO.
I want to make as editable for this PO after reversal of GR. Kindly do the nedful.

HI makarand ,
the condition type you have created is this assigend in Item Level or Header level. Plz check this in Header and item Conditions Tab. If you can assigned Delivery cost condition type in item level than it will changed by item level itself.
In Header Level it displays in Display Mode.
Vraj

Need to show the Condition amount or percentage(KBETR) in display mode.

Similar Messages

Maybe you are looking for