Needed: WebTools 2007 Implementation Partner

If you have experience implementing WebTools, please contact me at [email protected]
We are looking to implement our webstore as soon as we can to start generating revenue. The basic CSS look and feel is complete, so we just need someone who can finish what has already been started and work out any kinks so we can start driving traffic to the site.
You can view what we have done already at <a href="http://vpn.seatability.com/b1webtools">http://vpn.seatability.com/b1webtools</a>. The sooner we can get started, the better!
Thanks,
Derek Perkins

James,
Thank you so much for sending those files over to me. They are really helping me to get a hang of the integration.
What if I want to change the look and feel of things outside of the plugins? For instance, I've included below how I am changing some information on the My Account screen (\common\account\myaccount.aspx). Basically, I want to add this same header (CSS STYLING INFO) to every page of the account management process, as well as the commerce transactions and almost every other page on the site. I don't see how I can make those changes without editing the .aspx files.
<%@ Page Language="c#" MasterPageFile="~/masters/common.master" Inherits="netpoint.common.accounts.myaccount" Codebehind="myaccount.aspx.cs" %>
<asp:Content ContentPlaceHolderID="mainslot" runat="server" ID="main">
<div class="widget" id="myaccount"><div class="title"><h2>My Account Information</h2></div><div class="content">
<table class="npbody" cellspacing="1" cellpadding="2" width="100%" border="0">
</div></div>
On the part detail page itself, I want to take the every single .aspx file and give it a CSS ID so that I can make it look exactly how I want it to. There are 21 .aspx files in the catalog controls alone!
I apologize if I'm just not understanding something basic about how ASP is setup, and I really do appreciate your help and suggestions.
Thanks,
Derek

Similar Messages

WebTools 2007 - Messaging Set Up

Hello everyone,
Are there any instructions to setting up messaging in WebTools 2007? I am using patch 4, but cannot find any documentation out there to set this up. If someone could please point me in the right direction it would be greatly appreciated.
Thank you,
Kristen

Hi Fristen,
I just been working through this and finally have most of it working. The key for me for outbound emails was to use the local SMTP server instead of trying to send straight out to an external smtp server.   If you haven't done this I'd suggest:
1. admin/common/webconfig/webconfigs.aspx - Messaging options
    - Make sure you have C:\Inetpub\mailroot\Pickup (or relevant path for your local SMTP server pickup dir).
    - Make sure you have no value in the SMTP server host field (so it uses the local pickup dir)
    - Make sure you have any options tcked you need for sending emails (campaigns, orders, deliveries etc).
2. In IIS, for the SMTP server properties, go to the Delivery tab (windows server 2003) and choose advanced. You need to
   set the smart host value to the external SMTP server.
3. To test from here, firstly stop your local SMTP server and run your scenario. WebTools should generate the outbound
    emails and leave them in the Pickup directory. Open one and check the content is as expected.
4. Restart your SMTP server and it should send out the pending emails. If that works, but they never arrive you may have
    spam filtering or something else outside of webtools intercepting them.
The only loggin I know of is under Program File\SAP\SAP Business One Web Tools\Installer\logs. The current.log is an XML log capturing the high level steps of messaging. It will only tell you which phases of messaging it's going through though - I don't believe there's any way to enable low level loging.
Good luck with it. I have all the above working fine, but have not been able to get processing of bounce emails working - which is needed for campaign reporting. If you get that working I'd love to hear that!

Webtools 2007 Admin/Developer Guide

Do anyone know where I can find an Admin/Developer guide for Webtools 2007? It has been almost impossible to set up webtools without any guide to explain how to start.
Edited by: Russ Nolan on Jun 17, 2008 8:25 PM

Hello Russ,
Are you simply trying to skin the site, or are you developing custom ASP.NET controls?
For a quick way to get started with skinning the site (building a theme) take a look at this thread/webex:
[WebEX Demo - How to implement any web design into a Theme - 2007|WebEX Demo - How to implement any web design into a Theme - 2007]
If you have specific questions, maybe i can help you better.
Jay

Webtools 2007 Theme Samples

Can someone point me to some Webtools 2007 Theme Samples? I'm trying to build a site based on extracting what CSS data I can find from the basic theme that came installed, and I'm not being very successful.
Specifically, the beginning of my implementation is at <a href="http://vpn.seatability.com/b1webtools">http://vpn.seatability.com/b1webtools</a>, and I want to make each plugin in my slot look like the corresponding widgets in the header sample code. I just can't figure out how to deal with the widgets individually.

James,
Thank you so much for sending those files over to me. They are really helping me to get a hang of the integration.
What if I want to change the look and feel of things outside of the plugins? For instance, I've included below how I am changing some information on the My Account screen (\common\account\myaccount.aspx). Basically, I want to add this same header (CSS STYLING INFO) to every page of the account management process, as well as the commerce transactions and almost every other page on the site. I don't see how I can make those changes without editing the .aspx files.
<%@ Page Language="c#" MasterPageFile="~/masters/common.master" Inherits="netpoint.common.accounts.myaccount" Codebehind="myaccount.aspx.cs" %>
<asp:Content ContentPlaceHolderID="mainslot" runat="server" ID="main">
<div class="widget" id="myaccount"><div class="title"><h2>My Account Information</h2></div><div class="content">
<table class="npbody" cellspacing="1" cellpadding="2" width="100%" border="0">
</div></div>
On the part detail page itself, I want to take the every single .aspx file and give it a CSS ID so that I can make it look exactly how I want it to. There are 21 .aspx files in the catalog controls alone!
I apologize if I'm just not understanding something basic about how ASP is setup, and I really do appreciate your help and suggestions.
Thanks,
Derek

WebTools 2007 Released?

Has Webtools 2007 been released yet (in Australia). I couldn't find it on the portal? Is there a substantial difference to the 2005 beta version?

Hi Peter,
2007 will not be released before spring 2008 (ouch!). I can not give you as date as that has not been deteremined.
2005 Webtools?
I expect you mean 5.9. I believe that is was was demoed in Australia. Is this what you are referring to?
Is so, the answer is yes. 5.9 and 2007 are functionally similar, but the look and feel is entirely different. 5.9 is built on the .NET 1.1 framework. 2007 is built on the .NET 2.0 framework and does not run on SQL Server 2000. The upgrade between the two is problematic and any customizations will need to be redone.

Need help on implementing the BADI ME_GUI_PO_CUST

Hi All,
As per my requirement I need to do Enhancement for Unloading point field on PO.This filed will get all the department numbers applicable for the site on the line item.
For this I need to Implement the BADI BADI ME_GUI_PO_CUST.
The Method which needs to be Implemented is : TRANSPORT_TO_DYNP.
Instructions have been given for the Screen design.
Can anyone help me (with the sample code how) to Implement this method of the BADI in SE19.
This BADI method is taking a view as an Input and I am not understanding how to proceed.
Thanks and Regards,
Smriti Singh

Hi,
my suggestion is to check the standard documentation of the interface IF_EX_ME_GUI_PO_CUST.
After that you can check the method IF_EX_ME_GUI_PO_CUST~TRANSPORT_TO_DYNP in the example implementation class CL_EXM_IM_ME_GUI_PO_CUST.
Usefull links:
[Re: Implementing badi ME_GUI_PO_CUST;
[Re: ME21N - PO Enhancement using BADI;
Kind Regards.
Andrea

For file to IDOC scenario, do i need to make a partner profile in XI ?

for a file--->XI--->IDOC scenario, do i need to make a partner profile in XI(for the R/3 system which is going to receive the IDOC),
or only a port maintenance in idx1 will do.....

hi Sudheer,
yes u need to maintain partner profile in R/3
Check below link in WIKi for complete File to IDOC
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/fileToIDOC&
Sachin

Need to update trading partner from T-code: FINTAP or FINT

Hi all,
When i run T-Code FINTAP(Item Interest Calculation) or FINT(Item Interest Calculation), i need to update Trading Partner automatically.
Kindly let me know is there any BTE's or User Exit for the same.
Regards,
Rohini

Hi all,
When i run T-Code FINTAP(Item Interest Calculation) or FINT(Item Interest Calculation), i need to update Trading Partner automatically.
Kindly let me know is there any BTE's or User Exit for the same.
Regards,
Rohini

Why do i need outlook 2007 or 2010 for i cloud

why do i need outlook 2007 for i cloud i dont understand.

iCloud will still work for free, i.e sync your contacts between ios devices and the cloud (icloud.com) but for the calendar and addresses to sync with a windows PC you will need outlook 2007+.
However as you dont use that part at the moment i'm sesning no great loss - icloud bookmarks and photo stream will sync with a windows pc without outlook so the rest of icloud will still work for you for free

Is notes 1170688 needs to be implemented in both BW and R/3?

While executing an infopackage, the error " R3 016 "DataSource &1 has to be replicated (time stamp, see long text)" occurs. After investigation, we found notes 1170688 may fix this problem. After the notes been implemented, we did see the relevant code is changed, but we still cannot extract data.
My question is: Is this notes also need to be implemented in R/3? Currently, we only do this in BW system.

Thanks for replying. From the note, we see the affected release are SAP_BW and SAP_BW_VIRTUAL_COMP. Seems not effect to ecc.
Actually, the thing is to implement a notes into R/3 will trigger a complex process in our side even in non-production system. So we just want to make sure if it is fully necessary, then can trigger the process.

Need to determine which partner function level is pulling in the currency (

need to determine which partner function level is pulling in the currency (sold to, ship to , bill to or payer)on sales invoices
Also I my requirement is to have different currency based on different ship to party for same sold to..then how set up the same

Hi,
Yes, that is true. The field borders are not drawn when there is no data for that field.
Here's a workaround though. Create this formula and use this formula field instead of the original database field on the report
if isnull({database_field}) or not({database_field} > 0) or not({database_field} = "") then
space(1) else totext({database_field})
You can then apply borders on this field and you'll see that the field draws the border when there is no value.
If the field that is in the Subreport, then it needs to be done in the Subreport, otherwise in the Main Report.
-Abhilash

Adding new page in WebTools 2007

How can I create my own page in webtools 2007 that will inherit the theme? I was able to do this in 596 using the sample below but this doesn't work in WT. Am I inheriting from the wrong class now?
<%@ Import Namespace="netpoint.classes" %>
<%@ Page language="c#" Inherits="netpoint.classes.NPBasePage" %>
<form id="Form1" method="post" runat="server">
<h1>My Custom Content</h1>
</form>
Thanks,
Steve

Nevermind, I figured it out. This is how it looks now:
<%@ Import Namespace="netpoint.classes" %>
<%@ Page language="c#" MasterPageFile="~/masters/common.master" Inherits="netpoint.classes.NPBasePage" %>
<asp:Content ContentPlaceHolderID="mainslot" runat="server" ID="main">
<h1>My Custom Content</h1>
</asp:Content>

Need Help Regarding Dynamic Partner Link

Hi all
I am new to this Oracle BPEL.
I need to configure dynamic partner link.
need help with this.........
any useful links.. pls.

Hi',
Check this
http://blogs.oracle.com/dasoa/entry/11g_dynamic_partnerlink_example
there are plenty like this.
-Yatan

When is Patch Level 04 for WebTools 2007 Going to Be Available?

When is Patch Level 04 for WebTools 2007 Going to Be Available?

Nevermind, I can't believe I'm answering myself.
It seems to be available in the "Accessory Outlet Store" for a major discount ($25) here at Verizon Wireless. I guess the $30 off the original retail price is worth the trouble I've had for some time. But still, why doesn't anyone online or people in the stores know this?
https://store.verizonwireless.com/store/AccessoryOutlet

Batchmaster add-on Implementation partner chennai

Hi
Tell good Batch master add-on Implementation partner in chennai

Hi Ramesh,
Contact BatchMaster Software Pvt. Ltd. Company | ERP Solution Providers
Open this link and call to given Contact number and ask your query directly.
Thanks
Mohammad Imran

Needed: WebTools 2007 Implementation Partner

Similar Messages

Maybe you are looking for