WebTools 2007 - Messaging Set Up

Hello everyone,
Are there any instructions to setting up messaging in WebTools 2007?  I am using patch 4, but cannot find any documentation out there to set this up.  If someone could please point me in the right direction it would be greatly appreciated.
Thank you,
Kristen

Hi Fristen,
I just been working through this and finally have most of it working.  The key for me for outbound emails was to use the local SMTP server instead of trying to send straight out to an external smtp server.   If you haven't done this I'd suggest:
1. admin/common/webconfig/webconfigs.aspx  - Messaging options
    - Make sure you have C:\Inetpub\mailroot\Pickup (or relevant path for your local SMTP server pickup dir).
    - Make sure you have no value in the SMTP server host field (so it uses the local pickup dir)
    - Make sure you have any options tcked you need for sending emails (campaigns, orders, deliveries etc).
2. In IIS, for the SMTP server properties, go to the Delivery tab (windows server 2003) and choose advanced.  You need to
   set the smart host value to the external SMTP server.
3.  To test from here, firstly stop your local SMTP server and run your scenario.  WebTools should generate the outbound
    emails and leave them in the Pickup directory.  Open one and check the content is as expected.
4.  Restart your SMTP server and it should send out the pending emails.  If that works, but they never arrive you may have
    spam filtering or something else outside of webtools intercepting them.
The only loggin I know of is under Program File\SAP\SAP Business One Web Tools\Installer\logs.  The current.log is an XML log capturing the high level steps of messaging.  It will only tell you which phases of messaging it's going through though - I don't believe there's any way to enable low level loging.
Good luck with it.  I have all the above working fine, but have not been able to get processing of bounce emails working - which is needed for campaign reporting.  If you get that working I'd love to hear that!

Similar Messages

  • TS4463 I am using Windows Vista with Outlook 2007 and iCloud.  Everything has been great until this morning.  I'm suddenly getting the message "Set of folders cannot be opened.  The information store could not be opened.

    I am using Windows Vista with Outlook 2007 and iCloud.  Everything has been great until this morning.  I'm suddenly getting the message "Set of folders cannot be opened.  The information store could not be opened.  I tried running the repair utlity to repair the iCloud however I am still getting this error message.

    I tried rebooting.  It didn't change anything.

  • Webtools 2007 Admin/Developer Guide

    Do anyone know where I can find an Admin/Developer guide for Webtools 2007? It has been almost impossible to set up webtools without any guide to explain how to start.
    Edited by: Russ Nolan on Jun 17, 2008 8:25 PM

    Hello Russ,
    Are you simply trying to skin the site, or are you developing custom ASP.NET controls?
    For a quick way to get started with skinning the site (building a theme) take a look at this thread/webex:
    [WebEX Demo - How to implement any web design into a Theme - 2007|WebEX Demo - How to implement any web design into a Theme - 2007]
    If you have specific questions, maybe i can help you better.
    Jay

  • "Message"setting options

    HI,
    I am trying to change the setting options in "Message"
    when I go in to "preferences" and into "Alerts" I change the "Event" to "Message Recieved" and then close by the red X, if I go back in, it has not saved it, and its gone back to the default "when I Log In" but I do get the sound when a new message comes in.
    The other problem is, I have selected Ring" as "Play a sound", which works fine, but if I try to change it to something else, the tick stays on the new sound I select, but I still get the "ring" sound.
    Third problem is, I tried the "voice" option, it works fine, but I have unticked it, and I am still getting the voice.
    Is there a way to save any of this, or is it a bug in the system ?
    Thanks for any replies.

    HI,
    What we have here is one app that had some of the functions that are now given to all apps via the System Preferences > Notifications.
    In iChat 5.0.3 (Snow Leopard) if you set the Global Alerts for "When I Log In" to include the Speech option it will say "Logged in to (Screen Name)"
    Messages (version 7.0.1) will also "read" your Account/Screen name when saying "Logged in to (Screen Name)"
    In Both versions you can tick the box to Bounce the icon in the DOCK but in fact it does not.
    I double checked ichat 4.0.9 in Leopard's last version and it also does not bounce the DOCK icon on setting it for logging in yourself.
    I then set the Bounce option in Messages (And iChat 5) to check "Messages Received" and "Text Invitation" and then sent Bonjour Messages to each computer.
    Messages will read the message but not state who from regarding Speech.
    In either case it also will not bounce the DOCK  (even if the app if Quit and restarted)  IF and I repeat IF the App is the front app
    iChat 5 acts in the same way.
    However the behaviour changes once the app is in the "background" or at least behind one other app (in this Case the Web Browser I was composing this reply in).
    Checking iChat 4 and iChat 5 reveals the same behavior.  If the "front" app - meaning your are already watching it in theory, then the icon does not bounce.
    The settings in Messages will override the System Preferences > Noticifications settings for Bounce and Sound.
    The Repeat bounce is very slow in Messages.
    For me the Notifications only work if the app is Open (it does not have to be in front of other apps)
    They do not work if the app is Quit.  (In fact iChat 5 Bonjour window takes away the text entry field and iChat 4 keeps the text field but will not add any messages to the Chat)
    However I have the Messages App Menu > Preferences > General section set to "When I Quit Messages, set my Status to Off line"
    If I un-do this and quit Messages then iChat 5 thinks Messages is On Line and a new Message will "wake" the app, show the Notification Alert or Banner, bounce the Dock and play the sound.
    So... App not the Front App will get the DOCK Icon to Bounce.
    once you have set the Messages Preferences to do so for "Message Received" or "Text Invitation" depending on which point in a chat you want to catch the incoming Message.
    The Notifications pane in System Preferences can be set to Banners or Alerts depending if you want them to stay until dealt with.
    I can't replicate this bit at the moment
    I have once or twice had the notification pop down when Messages was open, but then stopped and went back to only popping down when I had quit Messages.
    I tried having Messages in the background (behind the Browser) and sending it a (Bonjour) message.
    The Notifications were set to Banners (Automatic removal).  I then Quit Messages before bring  the app to the Front and reading the message.  I did not get a repeat Notification.
    8:14 PM      Saturday; January 26, 2013
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Cannot change Hide Sent Messages setting

    I have a user that had his Curve 8530 replaced.  With his previous unit, he had the Hide Sent Messages setting (in Messages - General Options) set to Yes.  With his new unit, everytime he changes that setting to Yes and saves the change the sent messages are not hidden.  He goes back into the options and the setting is back to No.  No matter how many times he's changed and saved the setting it doesn't work.  He can change other settings on this screen (like Hide Read Filed Messages) and those settings remain saved.  He cannot change the Hide Sent Messages for some reason.  He's removed the battery and still doesn't work.  We are on the Enterprise Server and I can't find anything in there that would have changed that would be preventing this.  Any ideas?  Thanks.

    Hello,
    Nope...there is no such setting. My hope is that as they continue to develop the product, that they will even further enhance the replication of the on-device experience into Blend. But, for now, it is what it is.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Adding new page in WebTools 2007

    How can I create my own page in webtools 2007 that will inherit the theme? I was able to do this in 596 using the sample below but this doesn't work in WT. Am I inheriting from the wrong class now?
    <%@ Import Namespace="netpoint.classes" %>
    <%@ Page language="c#" Inherits="netpoint.classes.NPBasePage" %>
    <form id="Form1" method="post" runat="server">
    <h1>My Custom Content</h1>
    </form>
    Thanks,
      Steve

    Nevermind, I figured it out. This is how it looks now:
    <%@ Import Namespace="netpoint.classes" %>
    <%@ Page language="c#" MasterPageFile="~/masters/common.master"  Inherits="netpoint.classes.NPBasePage" %>
    <asp:Content ContentPlaceHolderID="mainslot" runat="server" ID="main">
    <h1>My Custom Content</h1>
    </asp:Content>

  • When I try to access iTunes or safari, I get the following message:The procedure entry point QTCF_CFHTTP message set header field value could not be located in the dynamic link library QTCF.dll  I uninstalled and reinstalled.same result HELP!

    When I try to access iTunes or safari, I get the following message:The procedure entry point QTCF_CFHTTP message set header field value could not be located in the dynamic link library QTCF.dll  I uninstalled and reinstalled.same result HELP!

    Taken at face value, you're having trouble with a QuickTime program file there.
    Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "QuickTime" and then click "Repair".
    Does the repair go through okay? If so, are you able to launch iTunes and/or Safari now?

  • When is Patch Level 04 for WebTools 2007 Going to Be Available?

    When is Patch Level 04 for WebTools 2007 Going to Be Available?

    Nevermind, I can't believe I'm answering myself.
    It seems to be available in the "Accessory Outlet Store" for a major discount ($25) here at Verizon Wireless.  I guess the $30 off the original retail price is worth the trouble I've had for some time.  But still, why doesn't anyone online or people in the stores know this?
    https://store.verizonwireless.com/store/AccessoryOutlet

  • 6230 picture message setting trouble !

    Hi ,Iv'e recently changed to a 6230 which has been unlocked from o2 . I use virgin pay as you go sim.Everything else seems to work but I can't send or recieve pic messages. iv'e spoken to virgin helpline tec's who talked me through manual settings , after which they decided that i had to go to Nokia. I did ,and downloaded the settings for my model but....... No good ,i'm still not able to send or recieve pics ! very frustrating any help pleeeease . Cheers Smudger

    Go to settings->messages-> set MMS to ON

  • I am downloaded ios 5 ..but  i not get imessage apps .......i was go to message setting and enable imeesege....but the i message app is not in my phone ...help me

    i am downloaded ios 5 ..but  i not get imessage apps .......i was go to message setting and enable imeesege....but the i message app is not in my phone ...help  me..????

    The iMessage is built right in the SMS app itself. Apple will automatically check whether the person that you want to send SMS to has iOS 5 and with iMessage turn on, if yes then your SMS Send button will change from green color to blue color to indicate that you are sending iMessage.

  • Webtools 2007 Hardware/Software requirements

    Hi - is there a minimum and recommended hardware/software requirements document for the server setup of Webtools 2007?
    Thanks!

    > Minimal / around 10,000 SKUs / 10,000 unique visitors
    > a week / 500 orders a day
    > 1x Machine (both Web and Database Server)
    > 2GHz processor
    > 2GB RAM / 20GB RAID1
    > Windows XP/2000/2003 Server with IIS & SMTP
    > SQL2000 Processor license, Std edition
    > MDAC 2.8 and .NET Framework 1.1
    > SAP Business-One DI-API Runtime*     
    > 512Kb (up & down) Frame Relay or DSL
    >
    > Firewall with Ports 80 & 443 open to internet
    >
    >
    >
    > Medium / around 100,000 SKUs / 100,000 unique
    > visitors a week / 1000 orders a day
    > 2x Machine (1 Web Server / 1 Database Server)
    > 2GHz Dual Processor
    > 2GB RAM / 40 GB RAID5 Array
    > Windows XP/2000/2003 Server with IIS & SMTP
    > SQL2000 Processor license, Std edition
    > MDAC 2.8 and .NET Framework 1.1
    > SAP Business-One DI-API Runtime*     
    > Dedicated T1 Frame Relay
    > Possible Co-Located Facility
    >
    > Firewall with Ports 80 & 443 open to internet
    > Trusted SQL Connection between servers
    >
    >
    > Web Farm / around half million SKUs / million unique
    > visitors a week / 10,000 orders a day
    > 4x Machine (2 Web Servers / 2 Database Servers)
    > 2GHz Dual Processor
    > 2GB RAM / 80 GB RAID5 Array
    > Fiber Channel SAN
    > Windows XP/2000/2003 Server with IIS & SMTP
    > SQL2000 Processor license, Enterprise ed.
    > MDAC 2.8 and .NET Framework 1.1
    > SAP Business-One DI-API Runtime*     
    > Co-Located Facility
    > With Tier One Infrastructure
    >
    > Firewall with Ports 80 & 443 open to internet
    > Trusted SQL Connection between servers
    >
    > Load Balancer
    Can 2007 be configured to use MS Load Balancing or MS Cluster services? Is there a document or whitepaper that outlines the 2007 installation components etc.
    Thanks

  • Webtools 2007 Theme Samples

    Can someone point me to some Webtools 2007 Theme Samples?  I'm trying to build a site based on extracting what CSS data I can find from the basic theme that came installed, and I'm not being very successful.
    Specifically, the beginning of my implementation is at <a href="http://vpn.seatability.com/b1webtools">http://vpn.seatability.com/b1webtools</a>, and I want to make each plugin in my slot look like the corresponding widgets in the header sample code.  I just can't figure out how to deal with the widgets individually.

    James,
    Thank you so much for sending those files over to me.  They are really helping me to get a hang of the integration.
    What if I want to change the look and feel of things outside of the plugins?  For instance, I've included below how I am changing some information on the My Account screen (\common\account\myaccount.aspx).  Basically, I want to add this same header (CSS STYLING INFO) to every page of the account management process, as well as the commerce transactions and almost every other page on the site.  I don't see how I can make those changes without editing the .aspx files. 
    <%@ Page Language="c#" MasterPageFile="~/masters/common.master" Inherits="netpoint.common.accounts.myaccount" Codebehind="myaccount.aspx.cs" %>
    <asp:Content ContentPlaceHolderID="mainslot" runat="server" ID="main">
    <!--CSS STYLING INFO--><div class="widget" id="myaccount"><div class="title"><h2>My Account Information</h2></div><div class="content"><!--CSS STYLING INFO-->
        <table class="npbody" cellspacing="1" cellpadding="2" width="100%" border="0">
    <!--CSS STYLING INFO--></div></div><!--CSS STYLING INFO-->
    On the part detail page itself, I want to take the every single .aspx file and give it a CSS ID so that I can make it look exactly how I want it to.  There are 21 .aspx files in the catalog controls alone!
    I apologize if I'm just not understanding something basic about how ASP is setup, and I really do appreciate your help and suggestions.
    Thanks,
    Derek

  • WebTools 2007 Released?

    Has Webtools 2007 been released yet (in Australia). I couldn't find it on the portal? Is there a substantial difference to the 2005 beta version?

    Hi Peter,
    2007 will not be released before spring 2008 (ouch!).  I can not give you as date as that has not been deteremined.
    2005 Webtools?
    I expect you mean 5.9.  I believe that is was was demoed in Australia.  Is this what you are referring to?
    Is so, the answer is yes.  5.9 and 2007 are functionally similar, but the look and feel is entirely different.  5.9 is built on the .NET 1.1 framework.  2007 is built on the .NET 2.0 framework and does not run on SQL Server 2000.  The upgrade between the two is problematic and any customizations will need to be redone.

  • WebTools 2007 B1 database requirements

    I know SQL 2005 is required for the WebTools database, but is it also required on the B1 side as well?
    I'm doing a WebTools install.  The WebTools DB is SQL 2005.  But the Business One side is using a SQL 2000 server.  The Synch Manager does not give me a SQL 2000 option on the B1 side, and will not connect to SBO-Common if I leave it at SQL 2005.

    Unfortunately, Webtools 2007 does require that Business One be on SQL Server 2005.

  • Group messaging setting not there!

    I bought a iphone 3gs a month ago and i want to sent a group text but it turns it into a mms group message. I've heard from people i need to turn off group messaging but when i go under settings>messages> there is no group messaging setting there. please help! thank you!!

    That option is available only when AT&T is your mobile carrier.

Maybe you are looking for