Needing Visio Stencil for WS-X6716-10GE card

Can't find it in the Catalyst 6500 switches .zip - anybody know where I can find it?

Hello,
Indeed, you will need WS-F6k-DFC4-EXL. WS-X6716-10G will be supported with SUP2T with that DFC upgrade.
Please refer
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/15.1SY/release_notes.html
Haihua

Similar Messages

Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

I've looked at the latest Security-Cisco ASA 55xx stencils on Cisco's website dated Feb 2012 (http://www.cisco.com/en/US/products/hw/prod_cat_visios.html) and they still don't have stencils for the ASA5525, ASA5545 and ASA 5555. When can those be ready?

Hello,
I also had some problems, this was the path taken;
> http://www.cisco.com/en/US/products/hw/prod_cat_visios.html
> All Visio Products
> product_visio_icon0900aecd80095127.zip
> Security-Cisco ASA 55xx_04.13.11.zip
These did not include the X series.
This however does;
http://www.cisco.com/en/US/prod/assets/visio/products_visio_icon0900aecd8050a7d7.zip
Cheers,
James.

I want to download Visio Stencils for ADF Faces

Dear members
I read about Visio Stencils for ADF Faces and I really Like it.
https://blogs.oracle.com/jdeveloperpm/entry/adf_faces_stencils_for_visio_available_on_samplecode
And I want to download it. Has any one tried it before.Can any one tell me where can I download it.
The articular says that it is Available through samplecode.oracle.com but i cannot find it
please help
thanks

http://www.oracle.com/technetwork/indexes/samplecode/jdeveloper-adf-sample-522118.html
Still down to http://download.oracle.com/otn/samplecode/ADF_Faces_Stencils_for_Visio.zip
you need to accept the license before download.
Timo

Unable to find visio stencil for 6506-E FourX Adapter

Hi
Where can i find the visio stencil for Cisco 6506-E FourX Adapter for 10 Gigabit Ethernet Mode. I found the WS-X6904-40G-2T module but I unable to find the FourX 10G Adapter for it.
Thanks in advance,
Martin John

Hi,
I was also getting same error, which is solved now.
For reference following is what we need to check.
- Proper mapping of source data to endeca dimension is made.
- You have made entries in "dimension_values.csv" but dimension is not specified in "schema.csv"
HTH
MS

Visio stencil for ace module

I've been searching but i can't find the visio stencil for the ACE-10 or ACE-20 module.
Can anyone point me in the right direction or is this stencil yet to be made ?

I don't think they are available yet. I needed them a few months ago, couldn't find them, and ended up making my own.
In case you need it, here's a link to the stencils Cisco provides.
http://www.cisco.com/en/US/products/prod_visio_icon_list.html

Visio stencil for a 3500XL

I need a visio stencil for the 3500XL series switches. I've found the ones offered on the cisco site for 3500 series switches but they are only for the 3550 switches. Can anyone point me in the right direction or happen to have the old 3500XL stencils??

They are similar ... but not the same. I've heard there are older stencils for the 3500XL out there but can't seem to track it down.

Visio stencil for ASA 5585-X?

Hello,
Can anybody help pointing me to where I can get a visio stencil for a asa-5585-x.
I really appreciate it.
Thanks,
John

Hi John,
The official Cisco Visio stencils can be found here:
http://www.cisco.com/en/US/partner/products/hw/prod_cat_visios.html
I don't see the 5585 there yet, but once it's available that set should be updated.
-Mike

Update Visio Stencils for UCS

Hi
Would it be possible to update the Visio stencils for the Unified Computing System. There are a number of servers missing as the stencil hasn't been updated since 2012, one in particular is missing and that's the C240M3 LFF chassis. Also there is no option for disks etc
Many thanks
Mike

I too am looking for stencils. Even the Voice_IP_phone stencil is
missing all the new series phones, such as the 69xx, 89xx and 99xx models.
Anyone know where to even open a request for the new ones, or is everyone not using Visio anymore?

Visio Stencils for Cisco Equipment

Does anyone know where you can obtain some good visio stencils for cisco equipment like routers, switches, gateways, cables, ports, etc. The default ones in Visio leave much to be desired. Any input appreciated - thanks.

I too am looking for stencils. Even the Voice_IP_phone stencil is
missing all the new series phones, such as the 69xx, 89xx and 99xx models.
Anyone know where to even open a request for the new ones, or is everyone not using Visio anymore?

Visio Stencil for HWIC-1GE-SFP

Does anyone know if there is a visio stencil for the HWIC-1GE-SFP for a 2951 router? I have looked through the index of stencils, but it is not listed there. Any suggestions would be appreciated. Thanks!
Gil

Hi Bruno,
I have just emailed the product group to request funding for the following:
EHWIC-4ESG
EHWIC-4ESG-P
EHWIC-D-8ESG
EHWIC-D-8ESG-
EHWIC-4SHDSL-EA
EHWIC-1GE-SFP-CU
Those are all of the EHWIC module part numbers that I could find. We are dependent upon the product groups to authorize and fund the Visio work and hopefully I will hear from them soon.
Regards,
Brett Newman
Cisco Visio Production
Visimation Inc.
www.shapesource.com

Does anyone have current Visio stencils for the newer wireless products?

Does anyone have the latest Visio stencils for Cisco's wireless products? Specifically looking for 3502 and 1260 series access points and the 5508 series controllers.
Thanks in advance!

Cisco does not seem to have an official stencil for the 5508. However I found this link and it seems to have 5508 stencils:
http://www.4shared.com/file/m_dueG18/Cisco-WLC-5508.html

Cisco Visio Stencils for newer modules

I have been trying to find stencils for 6500 modules released in the last couple of years, and have had very limited success. I need stencils for WS-X6748 modules, WS-X6724 modules, WS-X6848 modules, WS-X6816-2T modules and SUP-2T modules, as well as the NAM3.
If anyone can tell me where these can be found, it will be greatly appreciated.

Hi,
Most of what you listed are on the latest Switches-Catalyst 6500 located on the Visio download page:
http://www.cisco.com/en/US/products/hw/prod_cat_visios.html
The WS-X6748 and WS-X6724 modules are not in that file. I will ask the product group if they will approve production of those items.
Regards,
Brett Newman
Cisco Visio Production
Visimation Inc.
www.shapesource.com

Need UEFI Bios for my MSI Video Card R9 290 4GD5

Hello Need a UEFI Bios for my MSI Video Card R9 290 4GD5
S/N:912-V803-844B1310000906-249
Thanks you.

its some generic card, don't have info about it
have ask msi here about it: >>How to contact MSI.<<

Where are the latest VISIO stencils for logical network device icons

I want to use the same icons commonly used in the Cisco white paper documentation. Where is the stencil for VISIO?

Microsoft provided many Visio Stencils at Visio websites, however, if you want to create your own Visio Stencils you can create it in Visio 2010 in the following way
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
1. On the File menu, point to Shapes, and then click New Stencil.
2. To save the stencil, right-click the stencil title bar, and then click Save.
3. Type a name for your stencil, and then click Save..

New Visio Stencils for Catalyst 3750, Telepresence 1300

In response to customer requests, there are new images on the Visio Stencils web page at http://www.cisco.com/en/US/products/hw/prod_cat_visios.html
The updates include images for:
ASA 5510 Rear
ASA 5520 Front
ASA 5520 Rear
ASA 5540 Front
ASA 5540 Rear
ASA 5580 Front
ASA 5580 Rear
ME-C6524GT-8S Front
ME-C6524GT-8S Rear
ME-C6524GS-8S Front
ME-C6524GS-8S Rear
PWR-400W-AC - 400W AC
PWR-400W-DC - 400W DC
Catalyst 3750 Metro Front
Catalyst 3750 Metro Rear
PWR-ME3750-AC
PWR-ME3750-DC
CTS-1300-47
CTS-1300-65

Hi Kevin,
We updated the 3750 on 2/23/12 and the CRS on 2/20/12. Please check the download page.
Regards,
Brett Newman
Cisco Visio Development
Visimation Inc.

Needing Visio Stencil for WS-X6716-10GE card

Similar Messages

Maybe you are looking for