Negative Consumption Checking when Implementing Installation Groups

Hello,
I would like to Implement Installation Groups and I want to check for a negative consumption.
I didn't find any possibilities to make it through Custumising.
Maybe you know how to do it ?
Thank you very much in advance,
Michael.

Hi,
You can define Grouping types for Installation Groups as part of Master Data configuration.. You can do the same
Mater Data -> Utility Installation -> Define Grouping Types for Installation Groups..
You can control negetive consumption check here as well..
Have look at the doucument in SPRO pertaining to this for understanding.
Thanks
Vinod

Similar Messages

Mandatory is checked when exiting radio groups, but not text fields?

I have a form with many questions, and most all of them are required. When tabbing out or otherwise exiting a radio group, the user gets warned if they did not select an item. When tabbing out of a text field, nothing happens. The user does get warned about the empty text fields if they try to submit the form.

The following is a very basic/general script used to check/test if a field's value is null after the user exits out of the field. Note that it will not prevent the user from submitting the form, however, it seems you are covering that "validation" via other means (i.e. field property).
if (this.rawValue == null){
xfa.host.messageBox("Please enter a value in this field. It can't be left empty", "REQUIRED", 0, 0);
else{

The error occurs by correspondence check (WinVerify Trust) of the signature when Windows Installer with the digital signature is executed.

The following errors occur by correspondence check (WinVerify Trust) of the signature when Windows Installer with the digital signature is executed.
"Error 1330. A file that is required cannot be installed because the cabinet file C:\<tool>\Data1.cab has an invalid digital signature. This may indicate that the cabinet file is corrupt. Error 8230 was returned by WinVerifyTrust."
Please teach the following of Error 8230.
1) Occurrence condition.
2)Approach to avoiding.

So I found my own answer to the issue. The error was being caused by an the following xml in the assertion:
<ds:Reference URI="">
The value of URI attribute must have a '#' followed by the same value of the ID attribute in the parent 'Assertion' element (in our case a random string):
<saml:Assertion xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion" ID="a5k42vnhsywezqzyufq15c4bb9xuzeozrmbppj38xe" IssueInstant="2012-03-12T14:33:25.986Z" Version="2.0">
<saml:Issuer>ISSUER_NAME</saml:Issuer>
<ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
<ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
*<ds:Reference URI="#a5k42vnhsywezqzyufq15c4bb9xuzeozrmbppj38xe">*
How this is related to the digital signature is beyond me, though I admit I'm very new to saml and digital signing. However I spent a great deal of time investigating my certs and how I was creating the signature, which it seems is unrelated to the actual issue. I also wasn't able to find any docs specifying that this attribute was required, though I might have just missed it.

Billing using Installation Group

Hi,
Following is the scenario :
I have created two Devices 1 and 2. After technical installation of both the devices,Serial switching relationship maintained between 1 and 2 with 1 as the Main register and 2 as the Secondary register.
With ES32, Primary installation and Secondary installation are created. For the Primary installation, Grouping type is assigned.
For the Secondary installation, the installation role and Primary installation number are assigned. Different Rate categories are assigned to these primary and secondary installation. Rates are maintained with correct vairable programs suitable for installation group.
Configuration (Define Billing Rules for Installation group) is setup in such a way that only data exchange happens from Secondary to Primary (i.e) Consumption-relevant.
Billing relevant installation (EG34) of the secondary device is done against the secondary installation.Billing relevant installation (EG34) of both main and secondary device is done against Primary installation. This was done because the system insists
that both the devices in the register relationship should be installed in the primary installation.
Move-in process is executed for the both the installation, as a result, two different contracts created.
Meter reading results are entered for the Secondary Installation. Because of the Register relationship maintained, Meter results are entered for the both the registers.
Device1 : 150 kwh for the month of Jan
Device2 : 100 kwh for the month of Jan
While billing is executed (EASIBI) for the secondary installation, system calculated amount for 100 kwh.
Now, When I execute billing for primary installation, system throws the following error :
"Device 1 Register 001 has negative consumption deduction".
Expected behaviour is the system should calcuate for 50 kwh (150kwh - 100 kwh).
Can anyone help me to understand why this error occurs ?
Regards,
Sathya.

Hi ,
If you are using Installation grouping in that case you do not have to define serial switching relationship between primary and secondary register.
In case of Installation grouping ,billing relevant installation for Primary device is done at primary installation and secondary device is installated at secondary installation.
Please remove serail switching relationship and also correct the billing relevant installation for primary & secondary device and then try to bill both Installation.
Hope this helps.

Help - Installation Groups with Hierarchies

Hi experts ,
I created Installation Grouping with Hierarchies Set-up (Please find the attached Doc)
Using UTILIT85 Variant to derive Primary Installation billing relevant consumption , & Billing of primary is happening perfectly fine but When I am performing Billing of 2nd level Secondary installation (Which also have 3rd level Secondary installations) 3rd level installations consumption is not deducting from this 2nd level Secondary installation .
If I check DBERCHV table for Primary Bill Doc then there is -ve consumption line present for this installation , But during billing system is not deducting this consumption from Secondary meters consumption .
Please tell where I am doing wrong or what step I am skipping .
Please find the attachment with more clarity (What exactly I am doing)

Manoj:
Asking for documentation is not the appropriate approach in the forums. Please read Research Resources and Rules of Engagement. Ask a specific question, indicating what you have tried and where you have failed or are having issues.
This thread is locked.
regards,
bill.

Error when do installation

Hello,
I've got following error when do installation. I checked and libexpat.so.0 is exists in /home/oracle/oracle/product/2.0.1.2.0/beehive_4/lib and the path is on LD_LIBRARY_PATH
IMPORTANT NOTE: Now going to 'use XML::Parser' module which is a wrapper built around a perl binding to Expat XML Stream parser implemented in the 'XML::Parser::Expat' module. This module requires the 'libexpat.so.0' shared object. If you encounter a failure because libexpat.so.0 cannot be found then please re-try after prefixing '/home/oracle/oracle/product/2.0.1.2.0/beehive_4/lib' to the 'LD_LIBRARY_PATH' environment variable.
Please advice me.
Thanks

Did you use http://labs.adobe.com/downloads/acrobatcleaner.html ? That should clean up everything related to Adobe Reader.
Then download the installer from http://get.adobe.com/reader/enterprise/

Error when creating purchasing group.

Hi,
i am facing two issue when creating purchasing group. i never had such a situation before.
i have created two p.groups successfully and moved to quality.later i figured one of them is missing USER ID now when i try to enter user ID in user column getting below mention error.
Entry XXXX Does not exist in USR02-check your entry.message no 00058.i have checked in USR02 None of ID's exist i used in newly created groups.but ID i used in other groups has no issue even doesn't exist in USR02,but it shows value US in OB(Object type filed).
both ID's are not being created in Development in other words SAP ID's with SU01 but we never had such issue before while changing or creating now purchasing group.
Another thing i have noticed that OB(Object type field is missing in Dev.) i can see that field in Quality even in sand box but not visible in Dev.that when i use OME4.but when i use SM30-V_024 i can see the OB field.Somehow OB field is hidden when going through SPRO or ME04.
This is about Sap ver.4.7
Suggestion are much appreciated.

Hi,
Before creating new purchasing groups- 1st check your user ID is authorized to purchasing groups create in t.code: OME4.
In development system you can creates new purchasing groups with USER ID and telephone numbers, upon saving system will create a transport request. Later you can transfer related transport request to quality system for your testing.
For example: You can creates new purchasing groups with USER ID and telephone numbers
Purchasing groups-------------USER ID ---------------Telephone numbers
Z01-----------------------------------USR01------------------232569875
Z02-----------------------------------USR02------------------232589876
Regards,
Biju K

Sequence of check when saving customer/vendor

For customers, I am aware that there are 3 possibilities to check the contents of the entered data before the customer is really saved:
- Settings of field status group
- Message control
- User exit
Can anyone advise me in which order these settings are checked when saving a customer?
Best regards
Martin

Hello,
No, you can't. BP will always be created first and then a corresponding supplier/customer will be created depending on CVI configurations.

Database instance: You are not a member of the specified Installer group

Hi,
When I start ./RUNINSTALLER in HP-UX to install oracle, as a part of database instance instalation of SAP, the following message appeared.
"The Oracle Universal Installer Inventory on this system does not exist or is not writable. the possible cause are:
        1. The /tmp/orainstRoot.sh script was not executed with root priveleges, or an error occured during execution
        2. You are not a member of the specified Installer group"
Mention that I have executed the script by root user without any error.
Requesting your kind help to solve the problem.
Regards
Wahid

Hi,
I am trying to install oracle 9i as required by SAP ECC 5.0. Instance name is PRD as disaster recovery will be tested in that system. In the same time our SOLMAN is running in that system with database oracle 10g. We are planning to run parallel process in same time SOLMAN and DR PRD.
Till now we have done SAP Central instance installation. While trying to install database instance SAP asked to go /oracle/stage/920_64/Disk1/SAP and run the script RUNINSTALLER in HP-UX system for oracle.
To do this I have done the following
a. Logged on the system as oraprd
b. Set up environmental variable
          ORACLE_HOEM to /oracle/PRD/920_64
          DISPLAY to My work station IP:0.0
and started OS> ./RUNINSTALLER
After some time a window appeared headed by "Inventory Location"
I Specified base directory /oracle/oraInventory and pressed OK.
Then a window asked to run script /tmp/orainstRoot.sh by root user and then press continue
The script run successfully by user root. But when I press continue the following message appeared.
The Oracle universal Installer Inventory on this system does not exist or is not writable. The possible cause are:
        1. /tmp/orainstRoot.sh script was not executed with root priveleges or an error occured during execution.
        2. You are not a member of the specified Installer group.
Please help me how can I resolved the problem.

XL Reporter Composer Shut down when UDF as Group

Hi All,
I'm need to group the report using the UDF. When I run XL reporter, group the data by UDF generate or Edit report, the XL reporter shut down.
May I know any one facing this issue?
Looking forward advice and reply.
Thanks.
Regards,
Foong Yee

Group by UDF in XLR is always problematic. You should check other option to group by system field. Otherwise, try Crystal report or other tools.
Thanks,
Gordon

Getting Exception when implementing badi 'hrpad00inftydb'

Hi friends..
My need is to update infotype 0207 when ever employee changes address thru ess.
I implemented the badi 'HRPAD00INFTYDB' and inside it called 'HR_MAINTAIN_MASTERDATA'. But its giving the following two exception :
1. Exception 'CX_HRPA_VIOLATED_PRECONDITION' occured in the
procedure "INITIALISE_PS_ADAPTER'.
2. Exception named 'cx_sy_ref_is_initial' occured in the procedure 'HRXSS_PER_CLEANUP'.
I have checked the implementation by running it separately. It is working fine and is updating 0207.
Bt when i do the address change through portal, it is giving the above mentioned exceptions.
Please post a solution, if possible.
Thanks and Regards.
abhi

encountering the same error
anybody has answer to these? why is the standard old FM for updating infotypes is not supported by this BADI?

Problem using a group which has a space in it's DN when using LDAP Group mappings in UCS 1.4

Hey,
We've been implementing LDAP authentication (Active Directory) using LDAP group mapping in UCS 1.4, and we've noticed that when using a group which has a DN with a space in it (such as "UCS Admins") it wouldn't authenticate the user with the appropriate role.
Using a DN without spaces (such as "UCSAdmins"), works just fine.
I should mention that having a base DN with spaces works just fine as well, it's just the group mappings that doesn't work.
I should also mention that Cisco's "Quick guide to configuring ldap for ucs 1.4" shows an example in which the group's DN doesn't include a space.
Is there a workaround available which can make it possible using a group which has a space in it's name?
Thanks,
Dor

Hey Roman,
Thanks for your prompt reply.
We've tried putting quotes using UCSM which is not possible at all - not for the entire entry nor for the part with spaces.
We've also tried using CLI ("scope security/ldap/ldap-group") where you have to put quotes if you use a DN with spaces, and it still doesn't work. Furthermore, we tried adding quotes only to the part with the spaces, i.e. - CN="UCS Admins",OU=TEST,DC=TEST. It adds the entry without an error, but shows like we would use "CN=UCS Admins,OU=TEST,DC=TEST". Anyway, it doesn't work either.
Thanks again,
Dor

RMI-Server "checks" when Client closes RMI-Connection

Hi there!
I hope somebody can help me...
I'm developing a client/server application where my client calls a remote method and my server starts working (i.e. 5-7 minutes batch processing).
Is there a way my server "gets informed", when RMI connection is closed (network failure, client closes)? In this situation the server should perform a rollback, delete generated files, etc.
I don't know if there is thrown a exception inside the server method, which I can catch ....
Any suggestion is welcome ..
Best Regards
Anton

Thanks a lot, I will have a look at the tutorial.
Initially my thoughts on this issue were:
-) The Client-RMI call is made in an own Thread (There are several things to do before job processing can start on the remote machine).
-) when the RMI call is processed, the thread gets blocked, so doesn't add load to the machine (hope so).
-) RMI does the "alive-checking", when network connection fails the client can mark the job as failed. The called server should also do some rollback. So I do not have to implements callback-listeners to react on server callbacks
-) But I'm worried about open connections, running out of socket resources and that there is no way to abort a endless running job.
This is my first aproach to solve this problem, I would be very glad about any comment ...

Error in commitment check when creating maintenance orders

I'm getting an error " Error in commitment check" when creating the maintenance order for procuring the spare parts which is an non-stock item. I checked the cost for the particular Cost center/GL there is no money in that, so thatu2019s the reason for getting the error, so when we did testing in DEVL and QA, we put money into the cost center/fund/functional area and the issue has been resolved.
Now my client said they donu2019t want that control and they want to remove the commitment check so that you can create maintenance order even though you donu2019t have money on particular cost element.
FICO person told that there is no AVC check in place, also there is no budgeting control implemented, she also told that when they create Purch requisition directly they are not getting the error even though cost is not in that particular cost element but she wonder why it is giving error when we create the purchase requisition thru Maintenance order.
I have referred the experts forum to figure out this issue, but everywhere they mentioned this is due to budgeting or funds management issue and ask me to contact FICO person to remove the control, but there is no such person as current FICO person is an end user trained in SAP.
Your help is appreciated

Hi,
We got same error , while procuring through PM order , Please help us , what settings required .., Our version is 4.7EE .
The note mentioned up to level of 4.6 ,
Regards,
Sujana

Column with hide checked when I don't want it to be.

I have a subject area when I add a column, it has the hide check box checked. If I uncheck it , it still will have it checked when I go back in to it. They happen to be date fields in a materialized view. The columns will not show when the results tab is selected. I do not find nay errors in the nqquery.log or nqserver.log. Any ideas?
I still suspect it has something to so with the data type. A select from the view in sql looks fine.

Hi,
Steps to implements,
"The columns will not show when the results tab is selected. I do not find nay errors in the nqquery.log or nqserver.log. Any ideas?"
1) for the above issues, its know bug and its fixed in obiee11.1.1.6.0 make sure your version.
FYI:bug ref
13580620 COLUMNS ADDED IN THE CRITERIA TAB ARE AUTOMATICALLY ADDED TO ALL EXISTING VIEWS
2) by workaroun way in obiee11.1.1.5.0 and 11.1.1.3.0 version --> remove the existing view and re-create the view it will bring up newly added coulmn. otherwise when ever you just want to add new columns in your exsiting analysis view just edit and go to the result tab and you can find the required SA presentaion table columns in left side -->select it required columns and double click it then its will get displayed in result view.
Thanks
Deva

Negative Consumption Checking when Implementing Installation Groups

Similar Messages

Maybe you are looking for