Error in commitment check when creating maintenance orders

I'm getting an error " Error in commitment check" when creating the maintenance order for procuring the spare parts which is an non-stock item. I checked the cost for the particular Cost center/GL there is no money in that, so thatu2019s the reason for getting the error, so when we did testing in DEVL and QA, we put money into the cost center/fund/functional area and the issue has been resolved.
Now my client said they donu2019t want that control and they want to remove the commitment check so that you can create maintenance order even though you donu2019t have money on particular cost element.
FICO person told that there is no AVC check in place, also there is no budgeting control implemented, she also told that when they create Purch requisition directly they are not getting the error even though cost is not in that particular cost element but she wonder why it is giving error when we create the purchase requisition thru Maintenance order.
I have referred the experts forum to figure out this issue, but everywhere they mentioned this is due to budgeting or funds management issue and ask me to contact FICO person to remove the control, but there is no such person as current FICO person is an end user trained in SAP.
Your help is appreciated

Hi,
We got same error , while procuring through PM order , Please help us , what settings required .., Our version is 4.7EE .
The note mentioned up to level of 4.6 ,
Regards,
Sujana

Similar Messages

  • Error on ATP check when Creating a Sales Order

    Hello,
    I encounter error  on ATP check while creating a Sales Order.
    The error is when I create Sales Order using material A, with or with out indicating the Plant and Storage Location, the Purchase Order quantity is returned on ATP check, but when I create an SO with out indicating the Plant and Storage Location, no PO quantity was returned. Note that we applied SAP Note # 387482 to automatically determine the Storage Location. I have also checked material maintenance in MM03 of Materials A and Material B and nothing was different, they have the same Availabity check condition.
    Is it possible that the SAP note that I applied causes the error?
    By the way I have noticed that when I create Material B and manually populate the Plant and Storage Location there is a pricing error(but it returns the PO during ATP check).
    Thanks.
    Noreen

    Hello,
    I encounter error  on ATP check while creating a Sales Order.
    The error is when I create Sales Order using material A, with or with out indicating the Plant and Storage Location, the Purchase Order quantity is returned on ATP check, but when I create an SO with out indicating the Plant and Storage Location, no PO quantity was returned. Note that we applied SAP Note # 387482 to automatically determine the Storage Location. I have also checked material maintenance in MM03 of Materials A and Material B and nothing was different, they have the same Availabity check condition.
    Is it possible that the SAP note that I applied causes the error?
    By the way I have noticed that when I create Material B and manually populate the Plant and Storage Location there is a pricing error(but it returns the PO during ATP check).
    Thanks.
    Noreen

  • Error in Depot Repair when creating repair order for SR

    Hi,
    I am getting the following error in Depot repair when creating a repair order for a Service Request :
    "The Service Request Customer (GEJ Service Provider) does not own this item instance (&ITEM_INSTANCE). Please choose another instance. (IB_INSTANCE=21777)"
    An Item Instance was created for customer A (Owner), then party relationship was created in IB with another customer (GEJ Service Provider).
    Now a SR is created with customer as GEJ Service Provider and this item instance is selected.
    The error is coming up when trying to create repair order for this SR.
    Any idea how to resolve this issue?
    Regards,
    Mohammed

    Mohammed
    Please refer to this in Metalink note that says Deport Repair 11.5.10 enhancements and search for this ER number.
    ER: 4723163
    Service Request and Repair Order blocks of Depot repair do not allow ability to change Installed Base ownership of an item or creation of TCA relationships between existing TCA parties before creating a service request or repair order.
    Ability to automatically change ownership for an install base tracked item when returned for repair.
    ER 4723163
    Patch 4910836
    Look like you have applied this patch.
    Coming to the issue you cannot achieve what you are trying. The only option is to add this subfunction Depot: Allow Change of IB Ownership to your menu of the resp you are trying to use and the message will be different:
    This allows you change the ownership and create a repair order.
    Unfortunately customer relationship is not going to help at this time. YOu may want to log an SR and see if that is intended in the future. I checked R12.06 but the same behavior is exhibited there as well.
    Good luck!
    Thanks
    Nagamohan

  • How to check, when the Maintenance Order was deleted

    Hello Experts,
                          Can you please tell me of how to check for the maintenance order that when it was deleted and who has deleted that.
    If any T-Code is there or at the Table level also to check the requirement.
    Regards,
    Yawar Khan

    If you want to track when you have put deletion flag, you can track it using above mentioned techniques.
    If you archived (deleted) permanently, then using archival history only, you can check I guess.
    Check these links. While deleting maintenance order, we can hisorical order with same number. Using that creation date, you can track.
    http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e6552462a11d189000000e8323d3a/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e4d2f462a11d189000000e8323d3a/frameset.htm

  • Error, missing customer master when creating sales order, master data exist

    Hi,
    i am trying to create a sales order but the systems gives me an error that the customer does not exist, whereas the customer record does exist and was created centrally.
    please help me resolve this issue.
    Thanks
    Admire

    Dear Admire,
    One such query has been addressed by me in thread:
    Re: Incompletion Log for customer
    I hope, this may help you.
    Best Regards,
    Amit

  • Error while creating Maintenance order

    Hi,
    While creating Maintenance order with any order type (PM01,PM02 & PM03) & entering material in component Tab, the system is giving this Error 'Entry does not exist,check your entry'
    The used material is already maintained in the Material Master with all necessary information.
    Kindly suggest the best possible solution for this problem.
    Thanks in advance 
    Rohit8384

    Hi,
    The following error is coming while order processing.
    Entry    does not exist - check your entry
        Message no. 00 058
    Diagnosis
        Input values must be defined in Table MARA. The value or values '  ' are
        not specified in this table.
    Procedure
        Check whether the input is correct and correct if necessary.
    Procedure for System Administration
        If this is not an incorrect entry, check the system settings and change
        them if necessary.
        If there is a connection to the Customizing system, you can maintain the
        system settings by choosing Maintain entries (F5)
    Thanks in Advance.
    Rohit

  • Error when creating Production Orders: -5002 Invalid Code  [OWOR.Status]

    When creating Production Orders, I receive the error: -5002 Invalid Code  [OWOR.Status] on certain of the entries. Typically 200 orders are created at once.
    What could be causing the error?

    You may check this thread to have a reference:
    Setting the repByIns to Null
    Thanks,
    Gordon

  • Run Time Error in e-commerce crm 5.0 when creating new order

    Hi all,
    I am getting Run Time Error in e-commerce crm 5.0 when creating new order, shopping basket is comming , but while creating order , getting run time error.
    Thanks,
    Nagesh

    Hi nagesh,
    Are you able to resolve the issue. Please let me know the solution.
    I had started a thread with a same problem but in ERP E-commerce.  Points will be rewarded if you provide the solution in the thread below
    Re: Run Time Error in e-commerce crm 5.0 when creating new order
    Thank You
    Ram

  • Block PP Work Center capacity  when breakdown maintenance order create on that work center

    Hi All,
    My Client want to Block PP Work Center  capacity when breakdown maintenance order create on that work center, how can i do it ..
    Please help me.
    Payal

    Dear Sir,
    I have Done Every think but still Production Order is create.
    CM50
    OIOI
    CO02
    Payal

  • Getting error when creat sales order and Stock Posting

    Hi
    I have created enterprise structure, xd01, mm01, ovkk but I count't post stock.
    When create sales order getting error is that
    1.This material is not defined for sales area 1000, 10, 00.
    And if i use this T.Code MB1C,
    2. Parameters for plant 1000 not maintained in Inventory Mgt.,
    *3. Unit *** is not created in language EN.*
    Thanks in advance

    Dear selvi sankaran
    1)  Compare the sales organization, distribution channel and division of customer and material.  In your case, either of that should have been created differently.  Maintain the same sales area and retry
    2)  Go to omi8 and maintain the required parameters to your plant
    3)  Go to Material Master, select "Additional data" and click on "Descriptions".  There maintain "EN" under language.
    thanks
    G. Lakshmipathi

  • Error in commitment check

    Hello Guys,
    I could not able to save my PM work order for non stock or external services used control key as PM02 .When I try to save it..it throws an error says "error in commitement check -see costing log"
    Please help to fix this asap.
    Akash

    Thanks for your responses. I checked with FI team and it looks like all the settings are activated from their end. They asked me ot check whether I can able to write the PR outside thru me51n instead of auto creation thru maintenance order and I can able to create it...only I have the problem of this error in commitment when I try to do thru maintenance order....
    I am not sure whether I need to do any config from PM as my clients are using budgeting.
    I dont have any idea abt budgeting...pls guide to fix this.
    Akash.

  • Subcontracting Check Box in Maintenance Order

    Hello
    Help me to know if we are able to create the PR via control keys PM02 & PM03 then what the use or funcationality of subcontracting check box in maintenance order.
    Regards
    Kapil

    Dear Abhishek,
    The same error message refers to one of the following material provision indicators getting to me also:
    "S" - an entry within table T417 is missing where KZBRS (A&D-Specific Material Provision) is not set
    "X" - an entry within table T417 is missing where KZBLF (Rework Material from Subcontractor) is not set
    "F" - an entry within table T417 is missing where field ADSUB_DEFDLV (Deferred Delivery) is not set
    also, i Insert a row with S and keep MPCust and MPVend blank and Check the A&D MP box
    getting following error "
    Op. 0010 must have exactly one component as 'Rework Material to Subcontr.'"
    Can u tell me the config for MPI??

  • Object RESB within Critical Area - creating Maintenance Order

    Hi All,
    We are getting warning message while creating Maintenance Order. It says " Object RESB within Critical Area". After checking we found that 90% of the number range for reservation documents have been consumed and it is maintained in settings that the warning will come up when number range enters last 10%.
    we have changed this setting to 5% but still the issue is not resolved. We are still facing the same warning message.
    Kindly guide.
    Regards
    DM

    DM,
      This maybe due to the buffering of the number range numbers on the application servers.once these numbers are exhausted and new  block of numbers are picked up  from the database server this should go off.  Ideally you may want to adjust to a new  number range so that this warning message doesn't irritate the end users.
    Regards
    Narasimhan

  • Error in Commitment Check - see costing log

    I've encountered error when saving after release of wbs. "Error in commitment check (see costing log)", this error hinders me to create PR for several wbs. please advise how to resolve this issue.

    I looked everywhere in CJ20N to find this Costing Log and I can't find it or figure out how to open it!!
    in my case here I deliberately caused the error by assigning a budget of 95% of the plan --> the plan is all commitment items (material components)
    but I want to check that so called costing log and see the errors in it.
    Your help is highly appreciated

  • Error in Commitment Check message

    We are on SRM 4.0 and have funds availability turned on in the backend system (ECC 5.0).  A user created a shopping cart using multiple sources.  However, after the cart was approved, it would not transfer to the backend.  We are getting the error message "error in commitment check".  I looked everywhere I can possibly look and have not found anything wrong with the accounts.  I even tried to create the requisition on the backend using the same sources and did not encounter any problems.
    Does anyone have any suggestions as to what is causing this problem and how to resolve it?
    Monique Stephens

    We were able to correct the problem (sort of).  The user had created the shopping cart using multiple accounts and split them by percentage.  The percentages were two decimal places (for example, one account was getting charged 16.66).  But, if we changed the percentage to a whole number (ie 17), the cart went through successfully.
    That brings me to another question...is there a limit on the number of decimal places in SRM.  I know in SAP, we can only go one decimal place.  But, I don't know if that is in config or not.  If there is a limit, is there a way to prevent users from going beyond the limit while creating the cart so that we don't encounter this problem in the future?
    Monique

Maybe you are looking for

  • TransformerFactory.newInstance cannot be resolved to a type"

    Hi Techies, i am writing simple application for creation of XML using java, but while compiling i am getting the following error "Exception in thread "main" java.lang.Error: Unresolved compilation problem:      TransformerFactory.newInstance cannot b

  • Rman backup with no archivelog mode

    Hi Friend, I did this backup many times before, to backup a test db which is not in archivelog mode. My procedure are the following: $ rman target / rman> run { shutdown immediate; startup mount; backup format '/u02/RMAN/%d_LVL0_%T_%u_s%s_p%p' databa

  • Item Price Import Price List wise

    Dear All, How do we import Item price, price list wise in DTW.? Is there any specific template..? Thanks in Advance Regards. Aditya

  • Printing Address in table

    Hi all, I am printing 6 to 7 fields in the table of main window. In first coloumn, i am printing address of the vendor 2nd third fourth coloumns with  vendor number, po number and quantity fields . My problem is : for the first record it is printing

  • CR2008, C# and DB2 - Connection Info

    I have a report, originally created in Crystal Reports ver 9, and I have loaded it successfully in CR 2008 (stand alone).  I am able to run that report just fine, it prompts me for the parameter needed for the report, then it promts me for an ODBC da