Net value in source system and BW differ

Hi Gurus,
Some times like ' net value in source system is not matching with the net value in BIor BW for example net value of a product' why this happens even though the requests are loaded with out any issues , I mean If any loading errors occur we'll solve them and load the requests right. somebody help me out
Shiva

Shiv,
Use ODS in the dataflow, which will update the figure and no add. Perhaps i think u have loaded data directly to the Cube so that figures are getting added. This happens in cases like partial delivery where only part of total material(e.g 3 qty get despached out of total 10 qty) are despatched.
Regards.

Similar Messages

How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
Regards

DEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information.

Both Source system and BI system under BI tab not comming under SAP tab

Dear Experts
we have installed ECC6.0EhP4 ABAP and Netweaver BI7.0EhP1 ABAP,with AIX6.1,Oracle11G, I am trying to make connectivity between two system
its done successfully,But I am facing following error
1.in BI and ECC i am seeing source system and BI system under BI tab, its not coming under SAP tab,and BI consultant saying they are not able to extract the data from ECC ,they want source system Under SAP tab,how to solve this
2.In BI system they unable to execute the query ( I have applied GUI7.20 BI patch and Query patch) for this do we need JAVA stack?? kindly advice me
Regards
krishna
Edited by: krishna murthy on Mar 31, 2011 8:36 AM

thank you very much after gone through that Snote 1087980
problem got solved
Enter the following values
I_BIW_LOGSYS GDVCLNT200
I_OLTP_LOGSYS GDVCLNT200
I_FORCE_DELETE <X>
< DO NOT ENTER ANY VALUE IN THE FIELD - RFC target sys !!!!! >
Go to RSA1-> Source systems in the BI system connected to the ECC
system.
Select the ECC source system and select RESTORE in the right click
menu.
thanks
regards
krishna

Extraction failing after source system and client copy

Hi all,
We refreshed our source QA system with a copy of production. And basically tried to "restore" the connection from our BW QA system. Some of the datasources can be extracted from BW, others fail with an error of "No transfer structure is available for InfoSource 0COSTCENTER_ATTR in the source system".
Trying to do the same thing with RSA3 in the source system, works fine.
The strange thing is it works for some objects but not others.
here's what we did:
1. System copy from R3 Prod to R3 QA
2. Client copy with R3 QA client 300 -> 200
3. Restore connectivity in BW QA to the R3 QA system (Using RSA1 -> Source System -> Restore)
4. Now some objects can be extracted in BW, others fail as I mentioned above.
I have regenerated the transfer structures in BW and R3.
All of these objects that don't work seem to work in RSA3 on the R3 system but not in RSA1 on BW.
All the SAP documentation is geared to copying the R3 source system and then restoring connectivity between BW and R3. I don't think any of it involves copying the client in the R3 source system - which might be causing our problems.
We are using an SAP delivered PDF and note 886102 mainly for direction.
SAP PDF is "How to... System Copy in SAP Business Intelligence System Landscapes".
Does anyone have any ideas?
Thanks,
Kevin

Hi,
can you isolate somehow the kind of DataSource which works and those who don't?
Master data / transactional or client dependent and not, delta or full....
To which R/3 client is your BW connected? when you succeed loading the data, is it coming from the right client?
RSA3: do you run it specifying your BW client in the target sys field? does it make a difference if yes or if not?
Are your RFC connections and partner profiles all right?
Check some IDOCs sent by BW received in R/3 and vice-versa (RSSEND, RSINFO, RSRQST..). Load a hierarchy (via IDOC)... verify that your IDOC have the correct partner settings....
let us know
Olivier.
Message was edited by:
Olivier Cora

What is source system and open hub destination?

Hello,
Kindly tell me In BI data modeling workbench ,in modeling there is are two areas name as "Source system" and "Open Hub destination".What is mean by this???How we use it in BI?

Hi,
Source system as the name suggests mentions the source of data. The place from where you are extractin data to BW.
http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/27bcf087c7464db8b95eaa717b6e6a/content.htm
OpenHub is for exporting data out of BW.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11e1b990-0201-0010-bf9a-bf9d0ca791b0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3042c5fc-21a8-2910-c79e-ad530260ae2e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01d3a090-0201-0010-9783-bc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/bf/50453c01f4f75fe10000000a11402f/frameset.htm
Thanks,
JituK

How to Create an R/3 source system and load data from there

Hello All,
Till now I have only worked with Flat files. I want to create an R/3 source system and extract data from there on to my Info Providers.
Does anyone has detailed steps for that. I am using BW 3.5 system
Thanks n Regards,
Abhishek

1. Type Transaction WE30. Check iDoc types
2. Type Transaction SM59. Maintain RFC destinations
a.) Open the RFC Destinations. b.) Find your Source System and double click on it. c.) Technical setting should contain information regarding yoursource system d.) Logon Information should contain source system client and name & password for you remote logon. We use RFC_SAB for BW logon to R/3 and RFC_AAE for R/3 logon to BW. Password for both is always xxxxxxx. e.) Execute your 'Test Connection' & 'Remote Logon'. You should NOT be prompted for a password, if you are then the logon info is incorrect. f.) Repeat above to verify RFCs for other systems (CRM etc)
3. Type Transaction WE21. iDoc Processing Ports.
a.) Select 'Ports' and then 'Transactional RFC'. b.) Click on the Port # for you source system. c.) Verify description & SAP R/3 version.(BW 2.1C should be release 4.x) d.) RFC Destination should be one created in SM59. If non-existent then create one
4. Type Transaction SE16. Data browser (for R/3  BW Connections)
5. Type Transaction SM30. Msg Types & Assignment to iDocs
Enter 'EDIMSG' in the Table/View field. Click on the 'Enter Conditions' option for Restrict Data Range. Click 'Maintain'. Select Message Type. Then enter 'RSSEND' in "From' field. Verify that the Basic Type matches what is in your RSBASIDOCtable for each of your connections. If any are missing any entries you must create them as follows: Create another session and type Transaction WE30. Enter IDoc Type (ZSBAXXX) in Obj. Name field (Suggestion: Start new type with 'ZS' + Transfer Structure Prefix + (3)#'s) Select Create. Select "Create from Copy'. Enter 'RSSEND" in 'Copy From' field Enter Description (i.e. IDoc Type for BW Development) Execute (Green Check). Repeat for other missingentries.
6. Go to the SM30 main screen. Clients Overview
Enter 'T000' in the Table/View field. Click 'Maintain'. Verify correct Client and Description. If incorrect enter.
8. On BW Type Transaction WE20. Partner Profiles
9. On R/3 Type Transaction WE20. Partner Profiles
10. Check all is correct

Source System and RFC cnx

Hi Friends!
We have BI connected to ECC and working ok.
Now, the business will create a new instance in ECC, in the same server.
We only need use the second (newest) instance, but we dont want create e new source system.
We are thinking about change the RFC cnx of the source system, and put this pointed to the new instance.
With this solution, we hope that not changes must be take place in BI.
a) is this a good solution? any experience on this?
b) the RFC cnx, can identify each of this ECC instance, if both of them are in the same server?
c) doed I need any aditional change in BI?
Thanks a lot for your suggest!

This will work in case you will set up a new instance of ECC with same logical name, same RFC connection as 1st ECC instance has. Basically all the basis settings should be same.
Also consider that you have to switch off 1st ECC instance before connecting other ECC to your BW with same RFC connection etc...
BR
m./

Different number of data records in source system and BI system

Hi all,
I have been using datasources 0HR_PA_0 and 0HR_PA_1.
When I run and check the records in source system via RSA3 there are 4893 and 360 records respectively.
When I extract the records into my 0PA_C01 cube, however, 3058 and 249 records are coming respectively.
Furthermore, when I create a personnel record in source system, it is not extracted into BI cube.
What may be the reason?
I am looking forward to your suggestions.
Regards,
Dilek

Srinath,
I've created many new personnel records in source system and these records are displayed in the list of RSA3.
However, these newly created records are not reflected in BI cube when I extract data via the specified datasources.
I've checked whether there are some filters defined, however no filter seems to exist.
By the way, I am using full upload; no delta!
Regards,
Dilek
Edited by: Dilek Ersoz on Aug 14, 2009 1:45 PM

Cloning use the different gcc version between source system and target sys

Hi All,
Our system is: Application tier and Database tier is split to two servers.
We should run a cloning, but I found the different gcc version on application tier on source system and target system.
The source application tier server is RedHat Linux ES3, gcc version is 3.2.3
The target application tier server is RedHat Linux ES3, gcc version is 2.9.6
There is the same gcc version on database tier on source system and target system, they are gcc 2.9.6.
My question: Can I use the different gcc version between source system and target system when I run an erp cloning?
Thanks & Regards
Owen

Not necessarily, you might get some errors if the version is higher and it is not supported by the OS. An example is Note: 392311.1 - usr/lib/gcc/i386-redhat-linux/3.4.5/libgcc_s.so: undefined reference to 'dl_iterate_phdr@GLIBC_2.2.4'
To be on the safe side, make sure you have the same version (unless you want to give it a try).

How to create UD Connect Source system and datasources.

I am currently working on BI 7.0 and I need to report on Standard Queries on xPD (Extended Applications Product Defination)
In the BI Cont library it states the data for this application is fetched using UDI rather than Table Extraction. Can anybody please help me with documentation on Steps for creating a UD connect Source system and UD Datasources and how I should proceed.
Edited by: Amit Pal on Feb 19, 2008 6:17 AM

Hi,
Pls chk this link;
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/icc/bw-udc-jdbc%20universal%20data%20connect%20jdbc%20interface.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11cfa83d-0401-0010-9597-d3b7f487d72d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f094ba90-0201-0010-fe81-e015248bc5dd
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/frameset.htm
hope these helps,
Regards
CSM Reddy

Find distribution model in source system and maintain filter in it

I have an inbound idoc which is in status 51(error). The procedure shown by SAP is following:-
It has been determined that the particular employee 11001189 has been received for the first time.
Maintain the filter of the appropriate distribution model. To do this, call transaction BD64 in the source system.
Add new filter group to the data filter. Assign values to it.
I cannot find the distribution model. Please somebody help me in finding the relevant distribution model in the source system. One more thing, when I went to BD64 I found that some of the model views were in grey shade while others were in bold, please tell me why is it so.
Please give me some hint.

I have an inbound idoc which is in status 51(error). The procedure shown by SAP is following:-
It has been determined that the particular employee 11001189 has been received for the first time.
Maintain the filter of the appropriate distribution model. To do this, call transaction BD64 in the source system.
Add new filter group to the data filter. Assign values to it.
I cannot find the distribution model. Please somebody help me in finding the relevant distribution model in the source system.
You never maintain Filters in receivin system those has to me in sender system. Also you
need to distribute the Model from sender to receiver once you model is finalized thru menu
option in sender system. Find the Models with HRMD_A as message type
One more thing, when I went to BD64 I found that some of the model views were in grey shade
while others were in bold, please tell me why is it so
simple, If its greyed out then this model is maintained in some other system and is
just distrinuted over to this system, you shuld not maintain the greyed out entries as Maintaince
system is different. The non grey entires are those for which its same system in which the model
is created

Connection between Source Systems and BW

Hello,
I´m trying to connect our SAP BI 7.0 system to SAP R/3.
At the following link, the topics for connecting BW with SAP source systems aren´t mentioned in detail:
http://help.sap.com/saphelp_dm40/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
I already have setup and tested the RFC-connections, so I primarly need a step by step description for the ALE settings (Partner profiles,Port, IDoc types,IDoc segments) in the
context of BW-SAP R/3 connectivity.
Thank you for your postings
Best regards
Mehmet

Hi Srini,
Thank you for you´re answer.
I have checked WE20 and W21. The ports and the partner profiles are created automaticly in BW and R/3 sides, when creating the new source system in RSA1.
The main problem is, that the R/3 can´t send data to BW, although the ALE and RFC configurations are setup properly. After I replicated and activated several data sources in BW succesfully, I´m requesting data from the R/3 system with an infopackage, but after a few hours the follwing failure message occurs in the monitor :
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
In the TRFC (SM58) log in R/3 there appears an status text with the following entry:
"No service for system SAPABC client 123 in the integration directory".
For this entry I have found the SAPnote 940313. In this note,there is described how to send Idocs over Integration Server. Now I think that our R/3 system tries to send Idocs over the Integration server too.
But is there another alternative to send Idocs from R/3 to BW without using the Integration server?
Best regards
Mehmet

Header net value different in display and change mode in Sales Order.

Hi All,
I am facing a strange problem. When I check an order in display mode, I can see the header net value as 120047 Euro. However, If I open the order in change mode, it shows value as 133099.
Do not understand why?
Please help me to solve the issue.
Regards,
Neha

Dear Neha
Can you please clarify as to whether any header condition type is flowing in the sale order, so that I will try to give a suitable solution accordingly.
thanks
G. Lakshmipathi

New source system and 0logsys

hello,
We already have a BW production system connected to a unique SAP R/3 system.
Our infoproviders (ODS and infocubes) and our infoobjets are not compounded with 0logsys or 0sourcesystem.
We have to connect a second R/3 system to our BW systems.
Our problem is that we will be able to find master data with the same range in each system (for instance costcenter XXX will exist in both system but with different attributes).
My question is :
do I have other solution than adding 0logsys (or 0sourcesystem ?)as a compound of each master data we use and in all providers ?
Can you confirm me that for adding this compound "everywhere" i will have to empty all my infocubes/ods/master data ?
I've never done such transformation in BW so If you have advice to give it will be nice.
Hope my question is clear...
Thanks a lot

Hi Lea,
If you to want the 0legsys value along with historical data then you need to delete all historical data.
In case if you want the 0legsys value information from presnt data loading onwards then the following links will be help you lot...
Addition of new field
Adding a field in Infocube and ODS objects
Re: Infosource -adding new objects
Regards,
PRK
Message was edited by: PRK

A question about item "type and release" of source system creation

Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115     Oracle Applications 11i
TLF 205     Tealeaf 2.05B
XPD 020     SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
Maggie

Hello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie

Net value in source system and BW differ

Similar Messages

Maybe you are looking for