Netui:select default value on top instead of bottom

Is there anyway that I can change the netui:select tag to show the default value
on the top of the list instead of the bottom?
thanks
kunal

Kunal--
If you are binding to a data set (a LinkedHashMap, for example), you can insert the default value
into the data set in code in the JPF before binding to the select box, but it's not configurable
when simply setting the defaultValue attribute.
Apologies for the limitation.
Eddie
Kunal Mittal wrote:
Is there anyway that I can change the netui:select tag to show the default value
on the top of the list instead of the bottom?
thanks
kunal

Similar Messages

  • Netui:select default value at the top

    I am using netui:select with following syntax:
    <netui:select defaultValue="--Select--" dataSource="{actionForm.contactType}"
    optionsDataSource="{pageFlow.contactTypes}" styleClass="app-commomForm"> </netui:select>
    The problem is "--Select--" is shown at the bottom of the drop down. What do I
    do to show at the top of the list?

    Maybe you can use the default value attribute, that way the user will always see the select selected...
    or maybe try using a string array and place select at the start of the array...

  • Netui:textbox default value

    Hi,
    I am trying to use the following code as per the sample given in the help doc. But everything is working fine except the defaultValue attribute. I want to dynamically create 5 textboxes with defaultValue and use form bean while submitting the same. The code is as follows,
    <netui-data:repeater dataSource="{actionForm.test}">
    <netui:textBox defaultValue="123" dataSource="{actionForm.test}" />
    </netui-data:repeater>
    Here test is the array in the form. Instead of default value, I am getting the array reference value as the default value like [Ljava.lang.String;@18d551d is displayed. Anyone could help me out.
    Please Reply immediately.
    Thanks,
    Bala.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    hi,
    I just used {container.item} as datasource and solved
    the error. Anyway thanks for ur response.
    Thanks and Regards,
    Bala.I had a similar problem and this fixed it, thanks.
    But, now I have a different problem.
    If I initialize the array in my form and then display the jsp, the array is displayed with individual textboxes as desired.
    But, when I submit the form I get an index out of bounds exception.
    I'm assuming that it is trying to set the submitted values back into the array which has been reset to a zero length array, and this is causing the exception.
    The workshop automatically put this code in my Form when I added the array member (myList):
    public String[] getMyList()
    // For data binding to be able to post data back, complex types and
    // arrays must be initialized to be non-null.
    if(this.myList== null || this.myList.length == 0)
    this.myList= new String[1];
    return this.myList;
    The getMyList() method appears to be called for every textbox that gets submitted (each array element).
    How do I know how many elements to make my array in getMyList() since the length could vary?
    Jeff

  • Combo box select default value.

    Hi,
    I am using Combo box to display the status of the document.
    my code is
    oForm = SBO_Application.Forms.Item("I8_BGU_")
                            Dim oCombo1 As SAPbouiCOM.ComboBox
                            oForm.DataSources.UserDataSources.Add("ComboSrc5", SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 1)
                            'oItem = oForm.Items.Item("21")  ''for accessing the combo box item
                            oCombo1 = oForm.Items.Item("21").Specific
                            '' to bind the combo box item to defined user data source
                            oCombo1.DataBind.SetBound(True, "", "ComboSrc5")
                            ''giving some static values to combobox
                            oCombo1.ValidValues.Add("Open", "Open")
                            oCombo1.ValidValues.Add("Closed", "Closed")
                            oCombo1.ValidValues.Add("Extended", "Extended")
                            ' oCombo.Select("Open")
                            oCombo1.Select("Open", SAPbouiCOM.BoSearchKey.psk_ByValue)
                            oForm.Items.Item("21").Specific.DataBInd.SetBound(True, "@I8_BGU", "U_STATUS")
                            oCombo1.Select("Open")
    In this code when it reaches last lineof line it is throwing  error.
    Object refertence not set to any instance..
    some time it is throwing
    error,,
    " Unble to cast COM object sbouiCom.itemeventClas to Interface Type IItemevent. This application Cal is failed.
    The same logic working form for another form..
    Is there any modification needed.
    Please.. get to me..
    mahi.

    Hi Mahendra,
    In case of selecting a default value in a combo, it has 2 parameters to be passed.  Its as below.
    objCombo.Select(0, SAPbouiCOM.BoSearchKey.psk_Index)
    Replace this with proper value (1st parameter).  It will work.
    I find that you have already used that line.  So you can remove your last line.
    Best Regards,
    satish. B.
    Edited by: satish b on Jan 12, 2010 8:35 AM

  • Dynamic LOV with dates and selected default value

    Hello,
    I have a dynamic lov with dates. Query looks like this:
    select distinct concat(to_char(b.send_day_time,'YYYY.MM.DD HH24'),':00') display_value, to_char(b.send_day_time,'YYYY.MM.DD HH24') return_value
    from ...
    No I want to select a specific date as the default value. I put the following code for the default value:
    declare
    begin
    return to_char ('2008.02.19 10:00');
    end;
    But it doesn't work.The date (string) exists in the lov but it is not selected.
    Can someone tell me where the problem is?
    Thx in advance.
    Greetings,
    hamburger

    Hi hamburger,
    As return value you specified to_char(b.send_day_time,'YYYY.MM.DD HH24'),
    so your default value should be like to_char('2008.02.19 10'). Also pay attention to select the "Default Value Type".
    Hope this helps.
    chrissy

  • Netui:radioButton - default value

    I am using a netui:radioButtonGroup with 2 options -
    option a and option b.
    The user selects an option and it gets saved to the database. When the user comes back, I want to have his saved option automatically selected using the defaultValue. However, it is not getting selected. Any ideas?
    Thanks
    Kunal

    Set the property of the field in the form bean at the class level and in the radio button it will be defaulted to "A".
    form bean:
    private String radioOption = "A";
    public void setRadioOption(String aRadioOption) {
                   this.radioOption = aRadioOption;
              public String getRadioOption() {
                   return this.radioOption;
    jsp:
    <netui:radioButtonGroup dataSource="{actionForm.radioOption}">
         <netui:radioButtonOption value="A">A</netui:radioButtonOption>
         <netui:radioButtonOption value="B">B</netui:radioButtonOption>
         </netui:radioButtonGroup>

  • Default Value for a selection screen field

    Hi Experts,
    I am having a selection screen with a date field i am defaulting the date field to sy-datum but i also have a option of changing the date field value.
    The issue is i have defaulted the date field value in PBO event,so when i change my field value in selection screen every time the defaulted value is appearing instead of my new changed value.
    Plzz suggest a solution.

    Hi ,
           Actualy u should set the default value at the time of selection screen, but now from the same logic try to write like
       If Date is initial.
         data = sy-datum.
        endif.
    in ur PBO
    Try this.
    THank
    -Anmol
    Hi Experts,
    I am having a selection screen with a date field i am defaulting the date field to sy-datum but i also have a option of changing the date field value.
    The issue is i have defaulted the date field value in PBO event,so when i change my field value in selection screen every time the defaulted value is appearing instead of my new changed value.
    Plzz suggest a solution.

  • Select MULTIPLE default values for a multiple selection list box based on another field in Infopath 2010

    Hello there - Before I explain my issue, I would like to point out that I have reviewed some other discussions on selecting default values for multiple selection listbox. But my issue is specific and different, and not answered by any of the discussions
    I visited.
    I have a multiple selection list box (say for example all countries in the world as values), and I would like to pre-select or setup multiple default values (say five countries) based on some criteria that I query from MS SQL database table.
    I know we can go to Data | Default Values option to setup one or many default values for multiple selection list box. When I enter the default values manually this works. I also right click the field under the Multiple-Selection List Box group, then select
    Add another Value Below and set the Default Value for this field to setup multiple default values.
    However, if I reference a field (either an infopath field or a field from SQL database) I am not able to setup multiple default values. Infopath automatically selects the last field I selected for all instances and in the end I am able to see only one
    default value selected instead of many. How to fix this problem? Why would infopath allow multiple default values when we enter it manually but not when we reference some fields?
    Please let me know if you need more info. Appreciate your help.
    Thanks!

    Hi redhotc,
    According to your description, my understanding is that you want to set multiple default values for a multiple checkbox list in InfoPath form.
    I did a test with SQL database table. I set three default values for the checkbox list by adding three values field under the group field(Data->Default values), each value field is for a default value. Then publish it to my SharePoint site, everything
    was fine.Please have a try as the below link:
    http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
    Note: if you are using SQL databse table, you may need to enable ‘Allow cross-domain data access for user form templates that use connection settings in a data connection file’ in CA. More information, please refer to:
    http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010customization.aspx?ID=418b9423-a96c-4e5e-91f9-6a1b010ebb69
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Set Default value in dropdown box.

    I used selection= "Default Value" in dropdown box to do this functionality.But when i selected other value it is
    selecting the default value and saving also.but i want that page initiated the default value should be there and user can select other values and save.
    Please give me solution for that as soon as possible.
    Thnks in advance.

    Actually i m using the following code and it is fetching value from a table.Can u understand this code n provide me solution for default value.
    <htmlb:gridLayoutCell columnIndex       = "5"
                                  rowIndex          = "2"
                                  colSpan           = "1"
                                  wrapping          = "FALSE"
                                  verticalAlignment = "TOP" >
              <htmlb:dropdownListBox id                = "unitDropdownListBox"
                                     table             = "<%= IT_MSEHI %>"
                                     nameOfKeyColumn   = "MSEHI"
                                     nameOfValueColumn = "ZMSEHI"
                                     onSelect          = "setunitValue"
                                     disabled          = "<%= LV_MODEITEM %>"
                                 selection         = "<%= it_item-unit %>" />

  • Default value in field "requisitioner" in ME51N

    hello all
    when I create a preq with ME51N, the field "requisitioner" should have as default value the user: instead it states "USER!!"
    I recall seing this before but cannot remember why this happens
    can somone help? thanks
    Alisa

    Hi,
    In ME51n, Click on the personal settings and in that click default values tab and in the requisitioner field remove the USER that is maintained there and leave it blank and save.
    Hope this helps..
    Rewardz if helpful.
    Raj
    Edited by: Raj on Apr 27, 2010 5:00 PM

  • How to keep the defaultValue in the netui:select tag at the beginning of the dropdown values?

    Hi,
    I am using <netui:select dataSource="{actionForm.xyz}" defaultValue="Any" optionsDataSource="{actionForm.someMap}"
    />
    Now I am getting the values from database to populate the dropdown using the optionsDataSource.
    As I am using the defaultValue, it is being added to the end of the dropdown and
    selected by default when I a mopening the page on browser.
    In my dropdown, the values are as follows:
    apple
    orange
    banana
    Any
    Now my requirement is, the defaultValue, Any, must be there at the top of the
    list instead at the bottom of thge dropdown values. i.e., In the above list, "Any"
    must be above apple option.
    How can I achieve this using netui:select tag?
    Thanks & Regards,
    Murthy

    Murthy,
    Unfortunately, though a very reasonable requirement, there is no option for
    placing the default item.
    - john
    "Murthy" <[email protected]> wrote in message
    news:[email protected]..
    >
    Hi,
    I am using <netui:select dataSource="{actionForm.xyz}" defaultValue="Any"optionsDataSource="{actionForm.someMap}"
    />
    Now I am getting the values from database to populate the dropdown usingthe optionsDataSource.
    As I am using the defaultValue, it is being added to the end of thedropdown and
    selected by default when I a mopening the page on browser.
    In my dropdown, the values are as follows:
    apple
    orange
    banana
    Any
    Now my requirement is, the defaultValue, Any, must be there at the top ofthe
    list instead at the bottom of thge dropdown values. i.e., In the abovelist, "Any"
    must be above apple option.
    How can I achieve this using netui:select tag?
    Thanks & Regards,
    Murthy

  • SSRS 2012: How to get a "Select All" that returns NULL instead of an actual list of all values from a multi-select parameter?

    I have a multi-select parameter that can have a list of thousands of entries. In general, the user will pick a few entries from the list or "Select All". If they check "Select All", I would much prefer that I get a NULL or an empty string
    instead of a list of all values. Is there any way to do that?
    In experimenting with a work-around, I tried putting an "All" label with a null value in the list, but it is ignored (does not display in the drop-down). If I use an empty string for the value, my "All" entry does get displayed, but so
    does "Select All", which is confusing. Is there a way to suppress "Select All"?
    - Mark

    I adapted the following from a workaround posted by JNeo on 4/16/2010 at 11:14 AM at
    http://connect.microsoft.com/SQLServer/feedback/details/249227/multi-value-select-all-parameter-in-reporting-services
    To get a null value instead of the full list of all values when "Select All" is chosen:
    1) Add a multi-value parameter "MyParam" that lists the values to choose.
    2) Add a DataSet "ParamCount" identical to the one used by "MyParam", except that it returns a single column named [Count] that is a COUNT(*) of the same data
    3) Add a parameter "MyParamCount", set it to hidden and internal, then set the default value to 'Get values from a query', choosing "ParamCount" for the Dataset and the one [Count] column for the Value field.
    4) Change the parameter for the main report DataSet so that instead of using [@MyParam], it uses this expression:
    =IIF(Parameters!MyParam.Count =
    Parameters!ParamCount.Value, Nothing, Join(Parameters!MyParam.Value, ","))

  • Possible bug ? - Default value for select list

    4.2.1
    Hi, I have one page with a couple of reports. I have a time period filter on top. Its a select list with values 7 days, 3 months and 12 months. Default value is set to 3 (where return values of select list is 1,2,3 resp).
    Now in page 1 which has this select list, :P1_SELECT it has a report which shows counts of number of items purchased. When the user clicks on the count(hyperlinked column), it takes the user to another page which runs the details of the items and also uses the Page 1 select. It works fine when I change the time period. However, if I dont change the time period in the select list when I first login, althought I have set the default value to 3, the interactive report on page shows no data found, because the select list default value I guess it does not recognize.
    Is this a bug?
    Thanks,
    Sunil

    ryansun wrote:
    4.2.1
    Hi, I have one page with a couple of reports. I have a time period filter on top. Its a select list with values 7 days, 3 months and 12 months. Default value is set to 3 (where return values of select list is 1,2,3 resp).
    Now in page 1 which has this select list, :P1_SELECT it has a report which shows counts of number of items purchased. When the user clicks on the count(hyperlinked column), it takes the user to another page which runs the details of the items and also uses the Page 1 select. It works fine when I change the time period. However, if I dont change the time period in the select list when I first login, althought I have set the default value to 3, the interactive report on page shows no data found, because the select list default value I guess it does not recognize.
    Is this a bug?NO.
    Default values is only populated on the clien side and NOT in the session.
    This has been discussed thousands of times in the forum..found this with a simple search {message:id=4440597}

  • How-To populate SELECT LIST default value from SQL Query

    OK, I've done my homework, and did not find my answer in the Forum, so here it is.
    I have a Page that displays fields from a SQL Query. The Page also has below that radiogroups, checkboxes, and Select Lists to allow the user to change values in the fields that are displayed at the top of the Region. I am able to pre-populate the radiogroups and checkboxes by performing a SELECT in the 'Source value or expression' of the Source area of the Page Item.
    However, I am unable to do the same for the Select List fields. Their default value ends up being the first value in the LOV ('-- None --' for NULL values). Source Used: Only when current value in session state is null. Source Type: SQL Query. Also, when I first go into the Page when running it, and check the Session State values, they are all null, so I don't understand why the field is not populated by the SQL Query statement as the radiogroups and checkboxes are.
    Any suggestions??? I've tried all sorts of combinations.

    Thank you for the suggestion.
    I had considered that, but cannot do so, because we are using Oracle Application Express more for development than for data containment.
    We have all our data in an Oracle 10.g DB which is separate from the OAEX server, and the OAEX app will reference that data via VIEWs and DB LINKs. We are doing so primarily as an added data security layer, where the data is housed separate from the app, in case the Web site is ever compromised. The data that can be viewed is restricted to a subset of the actual data that is available.
    Since the data is on a separate server, (I assume) we will not be able to set the source type to Database column, because (I asume) that is dependent upon the data being housed by the OAEX server.
    That still leaves me with having to populate the field with a SELECT statement from the Oracle DB. This unfortuneately is almost a show-stopper for me because of down-stream processing data requirements. Have not been able to come up with contingencies yet.

  • Define default value for Select List

    Hello,
    I have an Item on the page, which is a Select list
    And I have a LOV associated with this item, which is a database query.
    How do I make one of the values of this LOV to be a default value of this Select list?
    I need this value to be displayed first, instead of a Null value.
    Thanks!

    That's right - use the Default value area of your Item definition.
    Have a look at this post:
    Re: previous selected option as default value
    May be you will find it useful...

Maybe you are looking for

  • File Adapter Format Issue:.csv target

    Hello When i am trying to write information from DB to a file as a CSV format it is always writing into xml format, though it is named with .csv extension. When you want to write the File as html target i need to do a html encoding but how to do it i

  • Problem with Themes - can't print photos

    Hello, When I try to print a photo I get an error message "No Available Themes- there were no themes located, until at least one theme has been installed this feature will be unavailable". I guess I'm going to have to reinstall iphoto - but what's th

  • Which printer fits my left-over ink cartridges?

    Some advice please....My elderly OfficeJet 6110 has finally gone to the Great Print Shop In The Sky...sad, but these things happen and it has given good service. So I need a new machine. One factor in my choice is that I am sitting on a number of HP

  • PS 32 bit or 64 bit - ?

    I'm on the latest edition of 27" iMac (purcahsed a year ago January), running OSX 10.8.5. I installed PS CS6 a year ago, I don't remember if it was 32 or 64 or both... I don't even know how to check it... I installed lately some PS filters that crash

  • System contiously asking to authorize incoming connections

    For two applications in particular. I already tried to erase and add again those as exception into the firewall (in the PrefPane) but it didn't work. I read somewhere that it could be due to some application signature problem...