Netui:select default value at the top
I am using netui:select with following syntax:
<netui:select defaultValue="--Select--" dataSource="{actionForm.contactType}"
optionsDataSource="{pageFlow.contactTypes}" styleClass="app-commomForm"> </netui:select>
The problem is "--Select--" is shown at the bottom of the drop down. What do I
do to show at the top of the list?
Maybe you can use the default value attribute, that way the user will always see the select selected...
or maybe try using a string array and place select at the start of the array...
Similar Messages
-
Netui:select default value on top instead of bottom
Is there anyway that I can change the netui:select tag to show the default value
on the top of the list instead of the bottom?
thanks
kunalKunal--
If you are binding to a data set (a LinkedHashMap, for example), you can insert the default value
into the data set in code in the JPF before binding to the select box, but it's not configurable
when simply setting the defaultValue attribute.
Apologies for the limitation.
Eddie
Kunal Mittal wrote:
Is there anyway that I can change the netui:select tag to show the default value
on the top of the list instead of the bottom?
thanks
kunal -
What are the default values for the NetStream.multicast***** properties
I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
Sorry for my poor english, Thanks.the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream. in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit. setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher. if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4). this is for safety. we recommend you always leave push enabled.
each peer (including the publisher) can change the multicast stream parameters dynamically. changes are local to that peer.
for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called. example:
var ns:NetStream = new NetStream(netConnection, groupSpecification);
ns.multicastWindowDuration = 10; // change default for everybody
ns.publish("mystream");
ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick. overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received. -
URM How to set default value in the "New Check-in" - "Folder" field
Hello everyone,
I'm trying to find out how to set the default value for the "folder" field in a check-in profile created using the Configuration Manager. If I browse to the folder in the "Browse Content -> Folders" menu and check-in a file inside the folder, it will fill this field automatically. I need to replicate this behavior using the "New Check-in" drop-down menu and selecting a profile, in other words, associate a Folder with a check-in profile.
I know it was possible to do so in previous versions using the folders_g component, but I'm unable to figure out how to accomplish it with the new FrameworkFolders component.
Any help is greatly appreciated.
Thank you.Hello,
It is working fine try this.
PARAMETERS :
y_p_list TYPE char32 AS LISTBOX VISIBLE LENGTH 22
MODIF ID rsg. .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR y_p_list.
MOVE: text-200 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-203 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-210 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-211 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-204 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-205 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-206 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-207 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-208 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'FIELD'
dynpprog = sy-repid
stepl = 1
value = ' '
value_org = 'S'
display = ' '
TABLES
value_tab = y_i_listbox[]
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
REFRESH y_i_listbox. -
How to set the default values of the field of the context.
Hi Experts ,
I want to set the default value of the field of the context.
Where and how this declaration should be done.
Thanks in Advance.In the context tab of the view. Select the attribute for which you want to set the default value.it will show the properties at the bottom. set the Default value property to the value which you want to set as the default value.
Regards
Naresh -
How to select multiple values from the parameters in BI Publisher report
How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...
Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj -
How to select multiple values from the Parameters in the concurrent program
How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?
I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc. -
Hi All,
I am new to Siebel and installed Siebel 8.1.1.11 on RHEL 5.5 (64 bit). Everything is fine Siebel server and gateway server are up and running but i am unable to open login page.
Login Error : The server you are trying to access is either busy or experiencing difficulties. Please close the Web browser, open a new browser window, and try logging in again.[15:36:09]
Siebel Server log file error :
GenericLog
GenericError
1
00006c5c52eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6352eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6452eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6552eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6652eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c7152eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c8052eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c8152eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c9052eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c9152eb6e6f:0
2014-01-31 13:06:04
(sccitems.cpp (310) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog
GenericError
1
00006c9152eb6e6f:0
2014-01-31 13:06:04
(sccconfg.cpp (2149) err=2555932 sys=0) SBL-SCM-00028: Key not found
I can connect to Siebel Server manager using command as : srvrmgr /g 192.168.0.163 /e Sieb81 /u SADMIN /p SADMIN
ODBC connectivity is also ok and i can connect as : ./odbcsql /source Sieb81_DSN /u SADMIN /p SADMIN
While installing Siebel i had left one step i .e.. creation of siebenv.sh using CreateSiebSrvrEnvScript because i got error when executed this script as :
Execution command : ./CreateSiebSrvrEnvScript /u01/siebel/ses/siebsrvr 192.168.0.163:2320 ENU Oracle
Error : cp: cannot copy a directory, '/u01/siebel/ses/siebsrvr/locale/' , into itself , '/u01/siebel/ses/siebersrvr/locale/C/locale'
Please suggest me what to do because if i want to configure again the same issue with CreateSiebSrvrEnvScript.
Message was edited by: Prabhakar2991Hi Prameela,
You can see all application objects are online and running. One more thing I have also checked ODBC is also working fine. I mean , user SADMIN can connect using ODBC.
=====================================================================================================================================
[oracle@siebel163 siebsrvr]$ srvrmgr /g 192.168.0.163 /e Sieb81 /u SADMIN /p SADMIN
Siebel Enterprise Applications Siebel Server Manager, Version 8.1.1.11 [23030] LANG_INDEPENDENT
Copyright (c) 1994-2012, Oracle. All rights reserved.
The Programs (which include both the software and documentation) contain
proprietary information; they are provided under a license agreement containing
restrictions on use and disclosure and are also protected by copyright, patent,
and other intellectual and industrial property laws. Reverse engineering,
disassembly, or decompilation of the Programs, except to the extent required to
obtain interoperability with other independently created software or as specified
by law, is prohibited.
Oracle, JD Edwards, PeopleSoft, and Siebel are registered trademarks of
Oracle Corporation and/or its affiliates. Other names may be trademarks
of their respective owners.
If you have received this software in error, please notify Oracle Corporation
immediately at 1.800.ORACLE1.
Type "help" for list of commands, "help <topic>" for detailed help
Connected to 1 server(s) out of a total of 1 server(s) in the enterprise
srvrmgr> list components
SV_NAME CC_ALIAS CC_NAME CT_ALIAS CG_AL IAS CC_RUNMODE CP_DISP_RUN_STATE CP_STARTMODE CP_NUM_RUN_TASKS CP_MAX_TASKS CP_ACTV_MTS_PROCS CP_MAX _MTS_PROCS CP_START_TIME CP_END_TIME CC_INCARN_NO CC_DESC_TEXT
siebelsrvr BusIntBatchMgr Business Integration Batch Manager BusSvcMgr EAI Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr BusIntMgr Business Integration Manager BusSvcMgr EAI Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr SCCObjMgr_enu Call Center Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr CustomAppObjMgr_enu Custom Application Object Manager (ENU) CustomAppObjMgr EAI Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr DQMgr Data Quality Manager Dqmgr DataQ ual Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr EAIObjMgr_enu EAI Object Manager (ENU) EAIObjMgr EAI Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr InfraEAIOutbound EAI Outbound Server BusSvcMgr EAI Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr EIM Enterprise Integration Mgr EIM EAI Batch Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr FSMSrvr File System Manager FSMSrvr Syste mAux Batch Online Auto 0 20 1 1 2014-01-29 02:48:25
siebelsrvr GenTrig Generate Triggers GenTrig Workf low Batch Online Auto 0 1 2014-01-29 02:48:30
siebelsrvr JMSReceiver JMS Receiver EAIJMSRcvr EAI Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr MqSeriesAMIRcvr MQSeries AMI Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr MqSeriesSrvRcvr MQSeries Server Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr MSMQRcvr MSMQ Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr SMQReceiver SMQ Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr SServiceObjMgr_enu Self Service Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr ServerMgr Server Manager ServerMgr Syste m Interactive Running Auto 2 20 2014-01-29 02:48:20
siebelsrvr SRBroker Server Request Broker ReqBroker Syste m Interactive Running Auto 25 100 1 1 2014-01-29 02:48:20
siebelsrvr SRProc Server Request Processor SRProc Syste mAux Interactive Running Auto 2 20 1 1 2014-01-29 02:48:25
siebelsrvr SvrTblCleanup Server Tables Cleanup BusSvcMgr Syste mAux Background Running Auto 1 1 2014-01-29 02:48:25
siebelsrvr SvrTaskPersist Server Task Persistance BusSvcMgr Syste mAux Background Running Auto 1 1 2014-01-29 02:48:25
siebelsrvr AdminNotify Siebel Administrator Notification Component AdminNotify Syste mAux Batch Online Auto 0 10 1 1 2014-01-29 02:48:25
siebelsrvr SCBroker Siebel Connection Broker SCBroker Syste m Background Running Auto 1 1 2014-01-29 02:48:20
siebelsrvr WorkActn Workflow Action Agent WorkActn Workf low Background Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr WorkMon Workflow Monitor Agent WorkMon Workf low Background Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr WfProcBatchMgr Workflow Process Batch Manager BusSvcMgr Workf low Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr WfProcMgr Workflow Process Manager BusSvcMgr Workf low Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr WfRecvMgr Workflow Recovery Manager BusSvcMgr Workf low Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eChannelCMEObjMgr_enu eChannel Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCommunicationsObjMgr_enu eCommunications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCommWirelessObjMgr_enu eCommunications for Wireless Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCustomerCMEObjMgr_enu eCustomer Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eEnergyObjMgr_enu eEnergy Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eMediaObjMgr_enu eMedia Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eEnergyOGCObjMgr_enu eOil Gas & Chemicals Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eSalesCMEObjMgr_enu eSales Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eServiceObjMgr_enu eService Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
37 rows returned.
srvrmgr>
=======================================================================================================================================
Please suggest me what to do.
Thanks
Prabhakar -
How to set a Default Value in the drop down on Account Creation ?
Hi,
i have to set a default value in the drop down as soon as a User in a particular business role clicks on New Account. I have written the following code in do_prepare_output method. But this code is executed in the 2nd server round trip after entering some value or pressing enter. so i am not getting as soon as user clicks on the New Account.
How to set that default value when user clicks on New Account ? and where should i code ?
IF lv_icwc_profile = 'ZCSALESPRO' or lv_icwc_profile = 'Z_SALESPRO' .
try.
lr_entity ?= me->typed_context->header->collection_wrapper->get_current( ).
lv_current = lr_entity->create_related_entity(
iv_relation_name = 'BuilRolesRel' ).
lv_current->set_property(
iv_attr_name = 'PARTNERROLE'
iv_value = 'BUP002' ).
CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
cx_crm_genil_model_error.
return.
ENDTRY.
Thanks and Regards
Raman KhuranaHi,
I have some idea abt it, it is also used in account life cycle.
Please refer SAP note 1097651, Defaulting a life cycle stage.
Let me know if useful.
rgds,
Vinay -
Default values for the controlling area and language
Hello
I have a query.
I need to set default values for the controlling area and language in the screen
"find account assignment data 1"
Is it possible to do so?
Thanks.
Jayawant GokhaleHello
To clarify,
This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
Could someone throw a light on this.
Thanks. -
Can we set a default value for the container variable in BPM?
Can we set a default value for the container variable.?
Suppose if i have a loop step and i have given a container variable i=5 as end condition.What value will it take during its first execution?Can we set the value for container before a recieve step?Hi
Define Container Variable of Type integer and Category Simple Type .Use Condtion in Loop.
In Container Operation Step Assign value and Use Expression to
Increase or Decrease Valus according to your operation.
look Pattern 4 in this blog to understand Container Operation
/people/sharathchandra.girmaji/blog/2008/09/11/bpm-with-patterns-explained-part-1 -
How we can find out the default value of the initialization parameters
Hi All,
How we can find out the default value of the initilization parameters from oracle database.
Thanks
ShijuHi,
you can find currently used parameter values v$parameter and v$parameter2.
if default values is different real values then you can see alert.log.
because in alert.log you will see non default values, rests is default.
Edited by: admin on May 8, 2010 3:41 AM -
Revision: 7553
Author: [email protected]
Date: 2009-06-04 09:32:51 -0700 (Thu, 04 Jun 2009)
Log Message:
Fix the default value of the "required" attribute for asdoc.
Bugs: SDK-21488
QE Notes: None.
Doc Notes: None.
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-21488
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelGenerator.java${ui:cond( uix.current.isNewRow, 'true', ui:cond( bindings.AddProjectNutsoverleg.value == 1, 'true', 'false' ) ) } notice the '.value' it could also be '.inputValue'.
If not there is also an option to make sure that when the checkbox is empty a value is returned anyways this work like this:
protected void processUpdateModel( DataActionContext ctx )
//First look for the request parameter
Object cbInRequest = ctx.getHttpServletRequest().getParameter( "nameofthecheckbox" );
//We only need to do anything if it was not submitted
if( cbInRequest == null )
// Get hold of the Form Bean containing the record
BindingContainerActionForm updateForm = (BindingContainerActionForm) ctx.getActionForm();
//Get the binding for our particular column
JUCtrlAttrsBinding checkBoxBinding = (JUCtrlAttrsBinding)updateForm.get( "nameofthecheckbox" );
//Reset that explicitly to the *unchecked* value
checkBoxBinding.setAttribute( 0, new oracle.jbo.domain.Number( 0 ) );
super.processUpdateModel( ctx );
}Maybe this helps. -
Need to set default values for the fields plant and location in ME21N
Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advancehi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam -
How to set default values on the screen painter parameters?
Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
<b>reward points if useful.</b>
regards,
Vinod Samuel.
Maybe you are looking for
-
Role Assignment Discovery Issue for Files and Folders through Sharepoint REST services
To preface, I am a decided Sharepoint newbie in every sense. I am trying to use the Sharepoint REST services (Sharepoint 2013) to walk the folder and file structure of my Sharepoint server and, determine as I go, the Role Assignments (and subsequentl
-
Problem with plotting XY data from PSD
Hello, I am pretty new to LabView. I am trying to make an XY plot that shows the coordinates read from a PSD (position sensitive detector) over time. I have the code attached so far, but when I get to the XY graph, it says "You have connected two t
-
Copy data between 2 localisations
My client is using Sap business one 2007A. he has a database with localization "Spain". he created another database with UK localization. he needs to copy the accounting entries from the first to the other one. copy express doesnt allow to copy data
-
HH2 - XP/Ubuntu dual boot - unreliable wifi
Firmware update 4.7.5.1.83.3.31 for the HH2B was supposed to resolve connectivity issues for dual boot systems. My experience suggests the problem has been made worse. I have to do a complete HH restart when switching from XP to Ubuntu, even when us
-
E72 - GSM commands dialed over SIP
Normally GSM commands (e.g. *100#) are sent with the green phone key. As soon as a sip service is started, they are dialed over sip, instead of sent through the GSM network. I assume this is a bug and not a feature. Nokia E72