Network card for G$

Can someone recommend a network card for a G4 ?
My built-in card died recently. I installed a DFE-530TX but couldn't get it to work with 10.3.9.
I am looking at some of the G-wireless options but not sure which one to select.
Any recommendation will be greatly appreciated.
G4 Mac OS X (10.3.9)
power g4 Mac OS X (10.3.9)
G4 Mac OS X (10.3.9)

Hi alexago,
Welcome to the Discussions.
metaphyz had a page of Mac OS wireless compatibility list but it seems to be down. Google has it cacked though. Click on the words in blue above to see the cached page.
John

Similar Messages

Hard code spwr network card for 100-full

How can I hard code a spwr network card for 100-full duplex?
thanks,
Clark

The following lines added to /etc/system sets a hme network card to 100 full duplex,
set hme:hme_adv_autoneg_cap=0
set hme:hme_adv_100T4_cap=0
set hme:hme_adv_100fdx_cap=1
set hme:hme_adv_100hdx_cap=0
set hme:hme_adv_10fdx_cap=0
set hme:hme_adv_10hdx_cap=0

Network Card for PowerBook G3

Hello everyone,
I have an older laptop and I have been told that I can only access the Internet with dialup because the computer does not have a network card.
Is there one available for the PowerBook G3. Better yet, can I get a wireless card?
Thank you very much
N
Macintosh PowerBook G3 Mac OS 8.6 or Earlier Mac OS 8.5.1

Welcome to Apple Discussions!
The Powerbook G3 has a built-in ethernet port. It is the same as a "network card" 10-base-T. It is slightly wider than the telephone cable though looks like a phone jack.
What age Powerbook G3 do you have? Some have a built-in port to insert an older style airport card (not the Airport Extreme), while others require using a PCMCIA WiFi card such as the Lucent Orinico Gold. See this article to identify your Powerbook G3:
http://docs.info.apple.com/article.html?artnum=24604

Replacement network cards for MacPro

My question is for anyone who is familiar with the MacPro motherboard. Lightning blew out my dual ethernet card and the estimate to replace it is around $450. A friend told me I could purchase a compatible network card and plug it directly into one of the three available slots on the mother board. If this is true, could anyone suggest to me a network card that is compatible with the MacPro motherboard? I would appreciate any help with this issue!

Are you considering any particular cards ?
I have had good luck with DEC21040 (10baseT) and DEC21140 (100baseT) cards
in Solaris 7 through Solaris 10 on x86.
The same can be said for 3Com 3C905C-TX cards.
Solaris 8x86 will recognize many chipsets natively,
and a number of third party developers have created working driver packages.
Most of their driver packages are free, but a few are not free.
Solaris 9 works with a few more, and Solaris 10 works with yet more adapters.
The Solaris 8x86 HCL list has the native cards.
This other Sun web page can direct you toward 3rd party sites.

Network cards for Solaris 8 x86

Which network cards are supported by Solaris 8 x86 ?
Thank you !
dorin.

Are you considering any particular cards ?
I have had good luck with DEC21040 (10baseT) and DEC21140 (100baseT) cards
in Solaris 7 through Solaris 10 on x86.
The same can be said for 3Com 3C905C-TX cards.
Solaris 8x86 will recognize many chipsets natively,
and a number of third party developers have created working driver packages.
Most of their driver packages are free, but a few are not free.
Solaris 9 works with a few more, and Solaris 10 works with yet more adapters.
The Solaris 8x86 HCL list has the native cards.
This other Sun web page can direct you toward 3rd party sites.

XPS 8700 - need additional network card for VMware Workstation

Hello -
I'm wanting to add either a dual or quad network card to my XPS 8700 so I can provide physical interfaces for some VMware Workstaion. Is there a specific band or model that is compatible..?
I've tried installing a spare Intel E1G42ET (dual port) card I had laying around, but the OS never saw it even with the drivers from Intel's website loaded up.
Any suggestions..? Thanks,

No - but it's just another card to the BIOS. Also, there's already a Wireless NIC and an Ethernet NIC in there. I appreciate the suggestion - I can test it,. but suspect the issue will remain the same.
Thanks,

Network Card for HP Laser Jet 2420

What type of network card do I need do I buy to put this printer on a network?

Hi,
Sorry, looks like no other choice since they (all models of the series) shown on the following links:
http://h10010.www1.hp.com/wwpc/au/en/sm/WF10a/18972-18972-3328059-3328066-3328066-416419.html
http://h10010.www1.hp.com/wwpc/us/en/sm/WF13a/18972-236251-236263-14638-f51-416419.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Teamed network cards for domain controllers?

can someone help me to resolve a debate we have: my colleage states that domain controllers (in our case Win2003SP2) should "not" have their network cards teamed for high availability (via HP's NIC teaming software).? I've not heard of this and cannot Bing/Google anything like this. I'm under the impression that a domain controller "should" have it's gigabit NICs teamed to make sure that directory services are highly available.
any information on this would be great. thanks...Peter A. Berger Jr.

Fault Tolerance and Network Teaming
                Anyone who has called Microsoft for help with a networking problem has likely heard the question: "Are you using network teaming?" I have often heard this referred to by Microsoft's customers as a "quick out" or an excuse that Microsoft was looking to pass the responsibility on to someone else. As someone that has been on both ends of the phone, and at the highest escalation point within Microsoft's Network queues I can tell you that it is a question born of wisdom and tempered with experience. While working the phones at Microsoft, supporting the largest and most critical systems in the US it was rare to ever get a call about the same problem more than once. Even more rare was for everyone on our group to get the same calls, and have the same experiences. I recall it happening when we fought the blaster worm, and when Microsoft's "Scalable Networking Pack" was released with 2003 SP2. These were bad, but a few months went by and except for a few straggles the phone calls stopped, the world got wise to the issue and the problem was resolved. I was amazed though to experience 1-3 calls a week with network issues CAUSED by network teaming. I could not help but be blown away by the irony of a program meant to avoid network failure so often causing it. I talked to colleagues, (of which I have found no better single source in the industry than at Microsoft), and found that even the old timers having more than 15 years with the company had the same stories of problems caused by networking teaming as we are constantly experiencing today. I am amazed that an industry as wise and agile as the computer industry has been (and is), has stuck with such a poor technology. I always asked my customers as the called with problems, usually critical ones, "What is teaming these network cards getting you". Almost unanimously the answer would come fault tolerance, to which I would reply rhetorically "How often do you NICs or Switches fail and how often has teaming caused network failure?" In my opinion, it is unforgivable for an application to constantly cause the problem that it is written to avoid. It should cause pause and reflection as to whether the technology is well suited for its function, whether it is just written poorly or if all of its implementations have similar problems. Technology today is beyond network teaming. There are far better methods of providing fault tolerance with manual and automatic failover. Most application writers have taken into consideration fault tolerance at the service level superseding anything that network teaming offers, so that network teaming should be a dead technology, because it is killing us.
                Finally, if you are considering using network teaming, or have had reason to reconsider its use, maybe these questions will help your assessment:
                What is my goal with using network teaming?
                Can I gain Availability through use of a more capable NIC card?
                How often have my NIC cards failed?
                When NIC cards have failed were they the only failure, or was it in conjunction with a Motherboard or other failure causing the service to be unavailable?
                What are my needs for uptime for these services?
                Would a manual failover (the simplest of options) be viable for this service?
                What options for automatic failover do I have (since most applications can have multiple providers through configuration)?
                One other note to add. While working on the phones at Microsoft, and later as a consultant to large and federal organizations, I found one thing that seemed to be true most of the time. When a problem occurred, it was rarely the OS itself, but something unnatural to its processes. Simplicity and minimalism is really one of the keys to a healthy server and environment. Often it is necessary to introduce other applications and services, but I do not think near as often as we do.
Note: MSFT does not support network teaming, because they do not own the software that provides it. In certain instances though, like with OCS, they flat out will not support OCS if teaming is enabled on the server.
Note2: I realize my comments above are very general, and so I want to apply these to this exact question. When I consider AD and how to make it fault tolerant, I cannot help but realize that the protocols, clients and services that make up Directory Services, are beautifully fault tolerant. In most cases, the loss of any one DC would not greatly affect the user's ability to authenticate to a computer or service within the domain. Even more, Directory services is inherently so fault tolerant that it can still function with the loss of a major part of the servers that make it up.
Don't forget to give credit where credit is due, vote this as helpful if it helped you.

Where can I find an apple airport extreme wi-fi network card for my Mac pro 2x 2.26ghz nehalem?

I can't seem to locate the correct network card anywhere, so I assume I'm attempting to find it without all the information. Assistance as to which card is the right one and where I can find it would be appreciated.

You mean the card shown here and here?

Utlizing 4 network cards for SUN v245

Hi
I would like to check if using the 4 network cards binded to the same ip address would be able to utlilize 1000Mbps?
Or would just configuring 1 card be sufficient?
How is it done??
thanks

Did a traditional, JETless jump overnight, and had the same effect. So it's not JET.

PCMCIA Network card for public network

Hi All
I am going to setup Oracle RAC on my laptops and would like to use PCMCIA netwrok card as public network, but I am wondering if it there would be any issue at all.
Could anybody advise please.
Thanks
Soheil

Soheil,
Just by adding more memory to your machine you can install RAC on your machine.You dont need two laptops.
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
Hope it helps

Wireless USB Network Card for Mac?

Can the iMac G4 (Flat Panel) recognize/use USB 2.0 (is it reverse compatible?) I For some reason I cannot get my wireless to connect reliably (will try the suggestion I received). My Ethernet connection is also not working. I would like to try a USB connector, but all of them I can find in store and even ebay are USB 2.0.
Thanks

Many of the USB 2.0 wireless adapter will work, but because USB 1.1 is so slow, the speed of the connection will be limited.
I have this one from OWC that is 802.11g capable
http://eshop.macsales.com/item/Newer%20Technology/MXP802GU2/
Your iMac G4 needs to have Mac OS X 10.3.9 or later (due to its driver that you install). It works with my older Mac (a PowerBook) that has USB 1.1. However, due to the port speed, it only works at about the same speed as 802.11b.
As for your current problem, if you have not used the reset PMU procedure, you can give that a try.
http://support.apple.com/kb/HT1712
and you might find some additional useful information here
http://www.apple.com/support/imac/g4/

Looking for PCMCIA network card

I installed Solaris 8 on my laptop(Compaq Presario 1275),
and am looking for PCMCIA network card to configure
networks. Does anyone have Solaris 8 installed on
laptops and configured networks? If yes, what kind of
PCMCIA network card do you have for your laptop?
I plan to purchase a PCMCIA network card for my laptop?
Any recommendation, vendor, model name?
Thanks,

Soheil,
Just by adding more memory to your machine you can install RAC on your machine.You dont need two laptops.
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
Hope it helps

LAN Network Card Ethernet Driver

Computer Crashed, Vista. Loaded Windows 7, Realtek PCIe FE GBE Family Controller Series Driver will not load on Windows 7.
Is there a driver for this Network Card for Windows 7 ?

Can you check the laptop's full model and part numbers from the label on the bottom? Don't include the serial number.
- Peter

Swapping Oracle 7 installation between two network cards

We have an NT server with two network cards for resiliance. We recently tried to swap over to the second card and run Oracle. Oracle started-up ok, but we could not connect to the database from the Aix/PC clients. The tnsnames.ora points to the hostname of the server not a hardcoded address. The hostfile on both clients and server were updated and the server could be pinged. Is there something built into the initialization config, which points to a specific network card? Any help gratefully recieved.

Is the network up? (sudo ifconfig -a). Can you see eth0?
From a terminal session on the server, can you ping localhost, your ip address, gateway?
OL 5.7 boots the Oracle UEK kernel by default. You can also select the original Red Hat Kernel at startup. Does it make any difference?

Network card for G$

Similar Messages

Maybe you are looking for