Network manager problems

Hi!
I have got some problem, just installed arch following the unofficial guide for newbies [or sonething like that^^], installed gdm and gnome-shell.
Now i cant get my Networkmanager to connect me with a wireless lan network.
If i dont add networkmanager to the demons and let network there and connect with
sudo wpa_supplicant -B -Dwext -i wlan0 -c /etc/wpa_supplicant.conf
sudo dhcpcd wlan0
everything works!
Can anybody help me?
Pls tell me which output u need so u can help me, i am new to all of this!
thx in advance!

daemon.log:
Nov 18 11:02:17 localhost gnome-session[894]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
Nov 18 11:02:17 localhost gnome-session[894]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
Nov 18 11:02:17 localhost gnome-session[894]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
Nov 18 11:02:17 localhost gnome-session[894]: DEBUG(+): GsmManager: last client disconnected - exiting
Nov 18 11:02:17 localhost gnome-session[894]: DEBUG(+): GsmManager: ending phase EXIT
Nov 18 11:02:17 localhost gnome-session[894]: DEBUG(+): Unreffing manager
Nov 18 11:02:17 localhost gnome-session[894]: DEBUG(+): GsmManager: disposing manager
Nov 18 11:02:17 localhost gnome-session[894]: DEBUG(+): GsmStore: Clearing object store
Nov 18 11:02:17 localhost gnome-session[894]: DEBUG(+): GsmStore: Unreffing object: 0x1a25870
Nov 18 11:02:17 localhost gnome-session[894]: DEBUG(+): GsmStore: Unreffing object: 0x1a25950
Nov 18 11:02:17 localhost gnome-session[894]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
Nov 18 11:02:17 localhost gnome-session[894]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
Nov 18 11:02:17 localhost gnome-session[894]: DEBUG(+): GsmStore: Clearing object store
Nov 18 11:02:17 localhost gnome-session[894]: DEBUG(+): GsmStore: Clearing object store
Nov 18 11:02:17 localhost gdm-simple-slave[796]: WARNING: Child process 894 was already dead.
Nov 18 11:02:17 localhost gnome-session[894]: DEBUG(+): GsmStore: Clearing object store
Nov 18 11:02:17 localhost gdm-simple-slave[796]: WARNING: Child process 894 was already dead.
Nov 18 10:02:19 localhost rtkit-daemon[966]: Successfully made thread 1088 of process 1088 (/usr/bin/pulseaudio) owned by '1000' high priority at nic$
Nov 18 10:02:19 localhost rtkit-daemon[966]: Supervising 4 threads of 2 processes of 2 users.
Nov 18 11:02:19 localhost dbus[723]: [system] Activating service name='org.freedesktop.ColorManager' (using servicehelper)
Nov 18 11:02:19 localhost dbus[723]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Nov 18 10:02:20 localhost rtkit-daemon[966]: Successfully made thread 1121 of process 1121 (/usr/bin/pulseaudio) owned by '1000' high priority at nic$
Nov 18 10:02:20 localhost rtkit-daemon[966]: Supervising 5 threads of 3 processes of 2 users.
Nov 18 11:02:20 localhost dbus[723]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
Nov 18 11:02:21 localhost dbus[723]: [system] Successfully activated service 'org.freedesktop.UDisks'
Nov 18 11:02:24 localhost goa[1155]: goa-daemon version 3.2.1 starting [main.c:112, main()]
Nov 18 11:02:51 localhost dbus[723]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
these are the last few lines....
what do the mean? anything in there that indicates my problem? wonder, any idea?

Similar Messages

Gnome-network-manager problems

Hello all,
I'm trying to use gnome-network-manager to connect to my wifi as it is WEP enabled and I don't know how to get it working in 'network'.
I followed this tutorial: http://wiki.archlinux.org/index.php/NetworkManager
However, when I reboot under those settings, I can't connect to anything, including ethernet.
Is there a problem in the wiki or is there a workaround that hasn't been posted there yet? I'm utterly confused as to why it will not work.
Also, if you need me to paste any code from any file, can you also tell me an easy way to copy/paste between aterm and Opera as I haven't found a way to do that yet.
Thank you very much for any help.
Matt

[matt@myhost ~]$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11g ESSID:"3KR98"
Mode:Managed Frequency:2.427 GHz Access Point: 00:18:01:E0:43:1A
Bit Rate:54 Mb/s Tx-Power=20 dBm Sensitivity=8/0
Retry limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=21/100 Signal level=-72 dBm Noise level=-87 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:76 Missed beacon:31
[matt@myhost ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:0F:B0:A1:71:02
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20f:b0ff:fea1:7102/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:82717 errors:300 dropped:592 overruns:300 frame:0
TX packets:61302 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:79395572 (75.7 Mb) TX bytes:9179527 (8.7 Mb)
Interrupt:22 Base address:0x6800
eth1 Link encap:Ethernet HWaddr 00:13:CE:6A:FE:C1
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::213:ceff:fe6a:fec1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:309 errors:0 dropped:76 overruns:0 frame:0
TX packets:41 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2420181 (2.3 Mb) TX bytes:2012 (1.9 Kb)
Interrupt:23 Base address:0x4000 Memory:bc005000-bc005fff
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:232 errors:0 dropped:0 overruns:0 frame:0
TX packets:232 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:20464 (19.9 Kb) TX bytes:20464 (19.9 Kb)
ill post output of disabling gnome-net-manager in a bit (i have to reboot and save it as a file first).
also, im running fluxbox, not gnome, so could that be part of the problem? am i missing something flux specific?

Network manager Problem

I installed the Network Manager, but regardless which button i click when i want to open network access manager / firewall / ethernet i get the following error in IE:
Error in NMI : Application is disabled. This application is not allowed to run on this system. This has been disabled by the Administrator.
Can someone tell me where to enable this?

I installed the Network Manager, but regardless which button i click when i want to open network access manager / firewall / ethernet i get the following error in IE:
Error in NMI : Application is disabled. This application is not allowed to run on this system. This has been disabled by the Administrator.
Can someone tell me where to enable this?

Network(Manager) problems after messing with netctl

Hello, and thanks for taking time helping me!
The story so far:
I was trying to bridge my wired and wireless network on my laptop, using netctl: https://wiki.archlinux.org/index.php/Bridge_with_netctl
It dind't worked and it messed my network up (I could see the wifi-indicator in the topright of my screen frozen in its "connecting" state), but I could still use wifi.
So I removed netctl and deleted its files from /etc/netctl and disabled/stopped the zombie-bridge. And then I could not connect wireless anymore (wired still works altough still frozen in the "connecting" state according to Gnome).
My system:
PC: An Acer aspire v3 laptop
OS: Arch x86_64
DE: Gnome-Shell
using NetworkManager as a.... NetworkManager I
the bridge I was trying to make:
Description="Example Bridge connection"
Interface=br0
Connection=bridge
BindsToInterfaces=(wlp3s0 enp2s0f0)
IP=dhcp
some logs (# systemctl status NetworkManager):
Sep 11 17:15:16 Skynet NetworkManager[299]: <info> Activation (wlp3s0) Stage 3 of 5 (IP Configure Start) started...
Sep 11 17:15:16 Skynet NetworkManager[299]: <info> (wlp3s0): device state change: config -> ip-config (reason 'none') [50 70 0]
Sep 11 17:15:16 Skynet NetworkManager[299]: <info> Activation (wlp3s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Sep 11 17:15:16 Skynet NetworkManager[299]: <info> dhcpcd started with pid 1415
Sep 11 17:15:16 Skynet NetworkManager[299]: <info> Activation (wlp3s0) Stage 3 of 5 (IP Configure Start) complete.
Sep 11 17:15:16 Skynet NetworkManager[299]: <info> (wlp3s0): DHCPv4 client pid 1415 exited with status 0
Sep 11 17:15:16 Skynet NetworkManager[299]: <info> Activation (wlp3s0) Stage 4 of 5 (IPv4 Configure Timeout) scheduled...
Sep 11 17:15:16 Skynet NetworkManager[299]: <info> Activation (wlp3s0) Stage 4 of 5 (IPv4 Configure Timeout) started...
Sep 11 17:15:16 Skynet NetworkManager[299]: <info> Activation (wlp3s0) Stage 4 of 5 (IPv4 Configure Timeout) complete.
Sep 11 17:15:16 Skynet NetworkManager[299]: dhcpcd[1415]: sending commands to master dhcpcd process
Sep 11 17:15:22 Skynet NetworkManager[299]: <info> Activation (wlp3s0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Sep 11 17:15:22 Skynet NetworkManager[299]: <info> (wlp3s0): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5]
Sep 11 17:15:22 Skynet NetworkManager[299]: <info> NetworkManager state is now DISCONNECTED
Sep 11 17:15:22 Skynet NetworkManager[299]: <info> Disabling autoconnect for connection 'Starfleet'.
Sep 11 17:15:22 Skynet NetworkManager[299]: <warn> Activation (wlp3s0) failed for connection 'Starfleet'
Sep 11 17:15:22 Skynet NetworkManager[299]: <info> Activation (wlp3s0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Sep 11 17:15:22 Skynet NetworkManager[299]: <info> (wlp3s0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Sep 11 17:15:22 Skynet NetworkManager[299]: <info> (wlp3s0): deactivating device (reason 'none') [0]
Sep 11 17:15:22 Skynet NetworkManager[299]: <warn> Connection disconnected (reason -3)
Sep 11 17:15:22 Skynet NetworkManager[299]: <info> (wlp3s0): supplicant interface state: completed -> disconnected
My guess is that somewhere my bridge messed everything up. But as I've leared with arch the awser could be very simple.
Thanks Again,
Pascal

I think I know what the problem is. I saw that a deamon called dhcpcd@wlp3S0 was running at the same time NetworkManager was. This would mean that both Networkmanager and netctl where running at the same time. I've disabled "dhcpcd@wlp3s0" and........ nothing.
Does anyone knows witch daemons i should disable/enable to let the system run on networkmanager alone?

Kde4 network manager problem

i'm new to kdebase, can anyone tell me what is the software i need to install in kde base, so i easily manage with my network, like eth0 and wlan0.

Go to the wiki and type: `Wireless Setup` in the search box.
Once there scroll down to "Other network managers" and your choices are well explained.
Hope this helps.
R.

Network Manager: Problem using Mobile Broadband

Hello,
I'm trying to use NetworkManager to configure an Internet connection using a 3G modem USB dongle.
I have a Huawei E160 on O2.
Steps taken so far:
* Installed NetworkManager using the ArchWiki article:
http://wiki.archlinux.org/index.php/NetworkManager
* nm-applet would not start, and the error on the virtual terminal matched that in the troubleshooting section of that article. I backed up and changed those 2 files. I don't know much about PolicyKit but nm-applet started and was able to connect to a WiFi network.
* I tried connecting to O2: the device was detected but on attempting to connect, the nm-applet connecting icon froze or stuttered (as in the animation was about 0.2fps).
* Errors on the tty indicated that nm was looking for files that did not exist. After searching I found a package 'mobile-broadband-provider-info' on LaunchPad which is included in Ubuntu. I found it in the AUR and installed it.
* Tried again, same behaviour of the icon, but this time errors on the tty resembled the errors that occured when nm-applet would not start.
I'm guessing the problem is with the PolicyKit configuration in the 2 files:
/etc/dbus-1/system.d/NetworkManager.conf
/etc/dbus-1/system.d/nm-applet.conf
If we can put together a general solution to 3G modems (rather than my specific problem), I will be willing to help out with the relevant wiki articles (probably after my exams).
Thank you very much for your help,
James Haigh.

Hooray! It's working!
I booted into Arch to run nm-applet from the terminal emulator to collect the exact error message to post, but then I noticed the mast icon!
I couldn't figure out why this now worked but I wondered if Ubuntu had sort of initialised the modem somehow (when I started this thread using the LiveCD, that was the first time I'd got it to work).
I don't think it was the restart because I'm pretty sure I restarted after installing mobile-broadband-provider-info.
So I started to read the new replies. I thought I'd set pacman to download (and install) arch-wiki-docs while I write a reply. My USB wireless mouse stuttered and stopped working. I tried replugging it, syncing it, wouldn't work. The download which was going at about 20KB/s (I thought this was due to bad reception; my O2 phone gets 1 or 2 notches here at college), stuttered and spewed out errors.
My tablet PC annoyingly has only 2 USB ports and no CD drive. So to use a LiveCD, keyboard and dongle I had to use a hub. I left the hub in when I booted Arch, and unplugging it fixed my mouse and dongle. The download went about 100KB/s!
But I wasn't using the hub before I used the LiveCD. I was just using the keyboard and dongle, and a great Firefox add-on called LoL, which makes browsing with no mouse easier.
(If interested, this list including LoL is useful:
https://addons.mozilla.org/en-US/firefo … n/keyboard )
So the initial problem is at least 1 of these:
* Bad reception
* Ubuntu initialised the modem but my installation/configuration of Arch could not
* I forgot to restart if/when it mattered
And the 2nd problem was the hub.
These weren't problems:
* ConsoleKit configuration
* Settings
I tried to understand those 2 files using GVim's diff with the backups and I couldn't see anything to try, so I left them unchanged.
My settings are in the manual for the dongle. They're not in mobile-broadband-provider-info so I will file a bug to make it easier for Ubuntu users etc. Looking at /usr/share/mobile-broadband-provider-info/serviceproviders.xml I made this:
<apn value="m-bb.o2.co.uk">
<name>Pay & Go</name>
<username>o2bb</username>
<password>password</password>
</apn>
The manual also says that:
* Tel no: *99# (which appears to be default and is never specified in serviceproviders.xml)
* Authentication: PAP (Also not specified, the default of try all methods works for me)
I could add a mobile broadband subsection to the troubleshooting section of the wiki article:
* Check signal
* Check USB
And add relevant links on articles like 'USB_3G_Modem' etc.
owain wrote:...I felt a bit let down that some update, somewhere, had changed my settings without letting me know (there certainly wasn't a pacsave or pacnew which I'd missed).
I like pacman and I like the way upgrading my system is my responsibility but that shouldn't have happened without a message. I'll be aware of things like this now, thanks.
Misfit138 wrote:Moved, as requested.
Thank you.
schuay wrote:
JamesHaigh wrote:
To install packages from the AUR, I suppose I'd have to:
* look at the PKGBUILD and figure out what files I need
* download the files onto my hard drive and save relevant wiki articles
* restart and boot into Arch
* modify the PKGBUILD
* build and install.
Also, command line configuration of connections might not be very practical at college; if something goes wrong I won't be able to access the ArchWiki, Google or other help. Although it might be worth a try.
Yeah that sounds about right (except you don't need to modify the PKGBUILD, just place the downloaded files in the same folder as the PKGBUILD and run makepkg).
That's useful to know.
Once you've got your internet running you can install 'community/arch-wiki-docs' for offline wiki access.
Thank you so much! This could be a life saver! I've installed it.
If you're in the UK, mkwvconf output for O2 is:
I will explore this alternative sometime. For something as important as this, a backup plan is useful. I've been using netcfg for WiFi for quite some time before I installed nm. It'd be great to use netcfg (and the nice menu) with wvdial.
Thank you all very much,
James.

Killer Network Manager Problem

Hy guys i've a problem with this program..i can't see the application installed on my pc
Have you any idea to resolve this problem ?

No need of 2 threads about same issue!
Continue your #1 one
https://forum-en.msi.com/index.php?topic=250713.msg1441395#msg1441395

Wireless, Network-manager, dbus problem

Hey, I'm trying to connect to wireless network at school using dhcdbd, gnome-network-manager, nm-applet... and it works but get disconnected constantly. Don't know much about networking so could use some help. Here's some output with lots of dbus errors...any ideas? Thanks.
** Message: <information> You are now connected to the wireless network 'XXXXXXXXXXX'.
libnotify-Message: Unable to get session bus: Unable to determine the address of the message bus (try 'man dbus-launch' and 'man dbus-daemon' for help)
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_call: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_disconnect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_disconnect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_connect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_connect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_call: assertion `DBUS_IS_G_PROXY (proxy)' failed
libnotify-Message: Unable to get session bus: Unable to determine the address of the message bus (try 'man dbus-launch' and 'man dbus-daemon' for help)
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_call: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_disconnect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_disconnect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_connect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_connect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_call: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): WARNING **: <WARNING> nmi_save_network_info (): Error saving secret for wireless network 'XXXXXXXXXXX' in keyring: 2
** Message: <information> You are now connected to the wireless network 'XXXXXXXXXXX'.
libnotify-Message: Unable to get session bus: Unable to determine the address of the message bus (try 'man dbus-launch' and 'man dbus-daemon' for help)
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_call: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_disconnect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_disconnect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_connect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_connect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_call: assertion `DBUS_IS_G_PROXY (proxy)' failed
libnotify-Message: Unable to get session bus: Unable to determine the address of the message bus (try 'man dbus-launch' and 'man dbus-daemon' for help)
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_call: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_disconnect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_disconnect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_connect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_connect_signal: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): CRITICAL **: dbus_g_proxy_call: assertion `DBUS_IS_G_PROXY (proxy)' failed
** (nm-applet:5382): WARNING **: <WARNING> nmi_save_network_info (): Error saving secret for wireless network 'XXXXXXXXXXX' in keyring: 2

When I configure a Wep key to my wireless internet
sharing network, my windows installed notebook can't
connect to my iMac. But when I set up it free the
notebook connects easily.
There does seem to be a known issue with a WEP encrypted software base station and Windows clients.
As far as I am aware there is no way to get a Windows client to connect to a WEP encrypted software base station (sharing internet via Airport on a Mac).
I tried both with ASCII and
HEX keys and generated them from:
You could try a ASCII key of
1234567123456
which will be a HEX key of
31323334353637313233343536
However if this doesn't work then nothing will.
I don't know what to do and I don't want to set a
wireless network free for security problems. Does
anyone know a solution?
Yes, get a wireless router and use that, it really is the only suitable solution.
iFelix

[SOLVED] Network Manager / nm-applet problems on fresh installation

I have just carried out a fresh re-installation of Arch on my old netbook, following a self-inflicted crash!
Previously, networking worked perfectly, but since the new installation, nm-applet is behaving strangely.
All connections (wired and wireless) seem to work OK, but when connected wirelessly, the nm-applet constantly shows the "searching" icon, and hovering over it, the message "Requesting a Wi-Fi network address for '<wlan name>'" is displayed. The Network Connections screen says that the Wi-Fi connections has never been used, despite the fact that it works!
I have tried re-configuring the connections, disabling IPV6 (this stops everything working) and completely uninstalling/re-installing Network Manager and nm-applet, but all without success.
I would be very grateful fo any ideas of how to tackle this problem
Many thanks in advance.
Last edited by myrlin (2014-08-20 19:42:44)

I have fixed the wpa_supplicant problem (changed the .conf file), but the problem still persists. I have even carried out a full re-installation in case I did something stupid.
Nnmtui shows "connecting" permanently, and nm-applet shows "Requesting a Wi-Fi network address for '<wlan name>'" with the cycling connecting icon.
Despite this, the wireless connection seems to work!
Can anyone suggest what else to try?

No interfaces shown in network manager [SOLVED]

Hi All,
I have just done a fresh install of Arch on my new Sony Vaio VGN-FW53GF, all goes well, except for Network Manager.
I can use my wired connection ok as eth0 shows up as active when I hover over the kde applet in the task bar. However when I go to "Manage Connections"
I do not see any Wireless networks or even my "working" wired connection in any list.
Wireless seems to be working as iwconfig shows an interface.
wlan0 IEEE 802.11abgn ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
But a scan gives this:
iwlist wlan0 scan
wlan0 Interface doesn't support scanning : Network is down
This machine is using the Intel driver "iwlagn" supplied by the kernel (2.6.31).
My /etc/rc.conf is:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Pacific/Auckland"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="Laptop2"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
wlan0="dhcp"
INTERFACES=(!eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng !network hal networkmanager netfs crond)
Can anyone offer some suggestion on how to get network manager going, I would like to use it. In the past
I have used Wicd, but it has some limitations.
Cheers,
Bernie
Last edited by bmentink (2009-12-24 04:19:49)

bmentink wrote:
Ok, I found the issue. I was missing the firmware for the card. I downloaded firmware from the intel site as per the wiki on wireless and
my interface comes up (shown with ifconfig) and I can see all the networks.
However, I cannot seem to connect to my network with WPA. When I go to connect I get network manager thinking the access point is WEP and asking for pass phrase.
If I select WPA(personal) and fill in a password, nothing happens .... just says unavailable.
Can anyone give some idea's here. I have not used network manager before for WPA.
Cheers,
Bernie
I use WPA2 with network manager without a problem. It should "just work", im not sure why you have issues, can you switch your router to a different security protocol to test?

How do I install individual driver of Killer LAN without its Network Management application?

I found sometimes the Network Management application would conflict with other online application, and in other forum an user provided a pure driver package that can solve the problem.
Here is the steps:
First you can download MSI pure Killer LAN driver from this link:
http://pan.baidu.com/s/1mgwZs96
Please uninstall old Killer LAN driver package from control panel if you already have the driver in OS.
Download and extract the RAR file to windows desktop. Double click “dpinst.exe” to install the killer driver.
It is normal if you see the message of “No device for update present” in the last step, that’ s because the driver package includes all kinds of killer LAN chip drivers, some don’t exist in your system.
Just click “Finish” to complete the driver installation. Restart system and you can start to enjoy the web surfing.
And if you encounter problem when you uninstall Killer LAN driver, you can use Killer official uninstall utility to completely remove the driver.
32 bit:
https://www.qca.qualcomm.com/drivers/KillerCleaner_32bit.exe
64 bit:
https://www.qca.qualcomm.com/drivers/KillerCleaner_64bit.exe

Just install the Killer LAN driver from MSI website, the manager is always installed with the driver.

Oracle BPM for Network Management Projects

Has anybody used Oracle BPM for network management projects with millions of events?
Can Oracle BPM handle it?

Please follow this step may this solve your problem.
please modify any thing in process "ExpenseReporting" for example any transition or any activity to place some where else or any other modification and then save that process. Then clean the project and build and deploy it.
if this also not solve the problem then export that project to and import it again in your workspace (Create new workspace or change the project name in same workspace ) and then again clean, build and deploy the application then test in work space.
Thanks,
Brijesh Kumar Singh

Gnome-network-manager & XFCE 4.4

Hey guys, someone know if gnome-network-manager also run on XFCE 4.4?
It won't run on my XFCE
Solutions to problem?
Bye,
Riccardo

Captain Spaulding wrote:
OK, open NetworkManager.conf and search for the line
<policy at_console="true">
and add this line:
<allow own="org.freedesktop.NetworkManagerInfo"/>
That, at least, should fix your initial issue. I have only just begun to learn more about dbus, so I have no clue about the second problem.
Mmmmm no entries as <policy at_console="true"> in my NetworkManager.conf....
So here we are my NetworkManager.conf:
<!DOCTYPE busconfig PUBLIC
"-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>
<policy user="root">
<allow own="org.freedesktop.NetworkManager"/>
<allow send_destination="org.freedesktop.NetworkManager"/>
<allow send_interface="org.freedesktop.NetworkManager"/>
</policy>
<policy group="users">
<allow send_destination="org.freedesktop.NetworkManager"/>
<allow send_interface="org.freedesktop.NetworkManager"/>
</policy>
<policy user="hal">
<allow send_destination="org.freedesktop.NetworkManager"/>
<allow send_interface="org.freedesktop.NetworkManager"/>
</policy>
<policy context="default">
<deny own="org.freedesktop.NetworkManager"/>
<deny send_destination="org.freedesktop.NetworkManager"/>
<deny send_interface="org.freedesktop.NetworkManager"/>
</policy>
</busconfig>

[SOLVED] Network manager only works as root

Hello everyone,
I am brand new to arch and have been quite impressed over the past few days over all it has to offer. Everything has been running quite smoothly and I am now in the process of setting up wireless. I installed network manager and was able to connect to a wireless network as root. For my regular user, however, I am running into some issues. First one was that the nm-applet could not be opened in fluxbox. I received the following error:
** (nm-applet:1576): WARNING **: <WARN> request_name(): Could not acquire the NetworkManagerUserSettings service.
Error: (9) Connection ":1.27" is not allowed to own the service "org.freedesktop.NetworkManagerUserSettings" due to security policies in the configuration file
I "fixed" this by adding the following to /etc/dbus-1/system.d/nm-applet.conf. Original credit goes to the user in this thread (I only slightly modified his code): https://bbs.archlinux.org/viewtopic.php?id=63576

<policy user="myusername">
<allow own="org.freedesktop.NetworkManagerUserSettings"/>
<allow send_destination="org.freedesktop.NetworkManagerUserSettings"/>
<allow send_interface="org.freedesktop.NetworkManagerUserSettings"/>
<deny send_interface="org.freedesktop.NetworkManagerSetting.Secrets"/>
</policy>

Now the applet shows up for my regular user, the problem being that it doesn't connect to the wireless networks (only wired). Whenever I try to connect to wireless, nothing happens (the symbol doesn't change in any way, i.e. the green spheres should start circling); I am still able to succesfully connect to wireless using root. Does anyone know what the source of this issue may be? Thank you very much in advance.
Last edited by Ipozya (2011-01-20 04:49:55)

Solved: Had to install consolekit and add "ck-launch-session" to my .xinitrc file when starting fluxbox.
Edit: Please note that this also allowed me to remove the previous change to nm-applet.conf (no longer necessary)!
Last edited by Ipozya (2011-01-20 04:54:20)

[SOLVED]Network Manager dispatcher unexpected unmounting davfs folders

I have used Network Manager dispatcher to configure automatic mount of cloud storage using webdav. i have used davfs2 to perform mounting and wrote a script for NM dispatcher.
If i run /etc/NetworkManager/dispatcher.d/10-YandexDisk.sh manualy all works perfect.
If this script will be executed by NM-dispatcher all will fine(YandexDisk mounts successfully, sycronization - successfully), but after ~10 seconds mount.davfs gets signal 15.
sudo systemctl status NetworkManager-dispatcher
NetworkManager-dispatcher.service - Network Manager Script Dispatcher Service
Loaded: loaded (/usr/lib/systemd/system/NetworkManager-dispatcher.service; enabled)
Active: inactive (dead) since Wed 2013-07-31 23:12:55 EEST; 11s ago
Process: 12132 ExecStart=/usr/lib/networkmanager/nm-dispatcher.action (code=exited, status=0/SUCCESS)
Jul 31 23:12:44 DellLaptop nm-dispatcher.action[12132]: --- yandex.ru ping statistics ---
Jul 31 23:12:44 DellLaptop nm-dispatcher.action[12132]: 2 packets transmitted, 2 received, 0% packet loss, time 1000ms
Jul 31 23:12:44 DellLaptop nm-dispatcher.action[12132]: rtt min/avg/max/mdev = 36.570/37.776/38.983/1.222 ms
Jul 31 23:12:44 DellLaptop mount.davfs[12138]: davfs2 1.4.7
Jul 31 23:12:44 DellLaptop mount.davfs[12138]: mount.davfs -o auto,nodev,dir_mode=755,exec,file_mode=755,gid=users,_netdev,rw,uid=lexa https://webdav.yandex.ru/ /home/lexa/.../YandexDisk
Jul 31 23:12:44 DellLaptop nm-dispatcher.action[12132]: >mounted https://webdav.yandex.ru/ to /home/lexa/Data/YandexDisk
Jul 31 23:12:44 DellLaptop nm-dispatcher.action[12132]: >exiting!!
Jul 31 23:12:55 DellLaptop mount.davfs[12140]: pid 12140, got signal 15
Jul 31 23:12:55 DellLaptop mount.davfs[12140]: unmounting /home/lexa/Data/YandexDisk
Jul 31 23:12:55 DellLaptop mount.davfs[12140]: unmounting failed
Why does this happen? Who send this signal ?
/etc/NetworkManager/dispatcher.d/10-YandexDisk.sh
#!/bin/bash
#this script will mount WebDav folder
# by pirat9600q
#given arguments are
#$1 is interface name
#$2 is state "up" or "down"
eth="enp7s0" #ethernet interface
wlan="wlp8s0" #wireless interface
ignore_connections="Pirat9600q" #WiFi SSIDs that must be ignored
mount_dir="/home/lexa/Data/YandexDisk" #mount point directory
remote_server="https://webdav.yandex.ru/" #server address
#local acces options
local_user="lexa" #files owner user
local_group="users" #files owner group
echo "<<<started with '$1' and '$2' arguments>>>"
echo "> our mount dir is '$mount_dir'"
echo "> and remote server is '$remote_server'"
case "$2" in
up)
#first of all we need to check internet connection
if (ping -c 2 -q yandex.ru); then
#we are online
if [ "$1" = "$wlan" ]; then
#Does this network is ignored ?
SSID=$(iwgetid -r)
for x in $ignore_connections; do
if [ "$x" = "$SSID" ]; then
echo "> WiFi SSID '$SSID' is in ignore list, exiting"
exit
fi
done
fi
if [ ! -d "$mount_dir" ]; then
fusermount -u "$mount_dir"
fi
if(mount.davfs -o auto,nodev,dir_mode=755,exec,file_mode=755,gid=$local_group,_netdev,rw,uid=$local_user "$remote_server" "$mount_dir"); then
echo ">mounted $remote_server to $mount_dir"
echo ">invoking syncronization script"
/home/lexa/.scripts/SyncYandexDisk.sh
else
echo ">error mounting $remote_server to $mount_dir !!!"
fi
else
echo ">network down";
exit
fi;;
down)
echo ">unmounting '$mount_dir'"
fusermount -u "$mount_dir"
echo ">removing $mount_dir"
rmdir $mount_dir
echo ">finished";;
esac
echo ">exiting!!"
exit
/home/lexa/.scripts/SyncYandexDisk.sh
#!/bin/bash
#this script will synchronize local storage
#with mounted Yandex Disk folder
# by pirat9600q
source_dir="/home/lexa/Data/YandexDisk/" #mount point directory
dest_dir="/home/lexa/Data/ARC/CloudSync/" #local storage location
echo "<<<started with:"
echo " source folder '$source_dir'"
echo " and destination folder '$dest_dir'"
if [ ! -L ${source_dir}Foto ]; then #if not link
echo ">invoking syncronization from '$source_dir' to '$dest_dir'"
echo ">syncronizing 'Foto' folder"
if !(rsync --quiet --recursive --update --executability --owner --group --delete-before ${source_dir}Foto/ ${dest_dir}Foto/); then
echo ">>error"
else
echo ">>success"
fi
echo ">syncronizing 'Documents' folder"
if !(rsync --quiet --recursive --update --executability --owner --group --delete-before ${source_dir}Documents/ ${dest_dir}Documents/); then
echo ">>error"
else
echo ">>success"
fi
else
echo ">syncronization will not be made, because source is fake"
fi
echo ">exiting"
exit 0
P.S. sorry for my English
Last edited by pirat9600q (2013-08-02 08:14:44)

I solved the problem. Here is a little explanation.
After NetworkManager establishes network connection, NetworkManager-dispatcher service is started( for ~10 seconds). This service execute /usr/lib/networkmanager/nm-dispatcher.action, which execute scripts in /etc/NetworkManager/dispatcher.d. After exiting nm-dispatcher.action mount.davfs process appears in NetworkManager-dispatcher`s CGroup. By default all processes in CGroup must be killed when service stops. To change this behavior I have added KillMode=process to [Service] section of NetworkManager-dispatcher.service file.
sudo nano /usr/lib/systemd/system/NetworkManager-dispatcher.service
Here is it`s code now.
[Unit]
Description=Network Manager Script Dispatcher Service
[Service]
Type=dbus
BusName=org.freedesktop.nm_dispatcher
ExecStart=/usr/lib/networkmanager/nm-dispatcher.action
KillMode=process
[Install]
WantedBy=multi-user.target
Alias=dbus-org.freedesktop.nm-dispatcher.service

Network manager problems

Similar Messages

Maybe you are looking for