Network shares Not giving the prompt.

We have a share created on a Domain environment but when users try to access over the network it do not ask for the credentials and give me an error message 
You do not have permission to access \\lyncarchive.iyogi.net\Lync-Archive. Contact your network administrator to request access.
For more information about permissions, see Windows Help and Support
I have checked the credential manager and removed all stored usernames and passwords but still get the same error message.
Any help is appreciated....
THanks,
Abhinav Hooda
RIWA

Hi,
Did you access the network share from a domain member server or a non-domain workstation? If from a domain member server, it does not ask for the credentials when user does not have permissions to access the network share. If from a non-domain workstation,
please check if you can using the following settings on Windows server 2012 to achieve this.
Go to Control Panel > Network and sharing center > Change advanced sharing settings > Enable Turn Off password protect sharing option
Best Regards,
Mandy 
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • App.activeDocument.name  not giving the new name entered in save as option from the script

    When I open a document and use save as option and enter a new name. The app.activeDocument.name object is still giving me the old file name, it not giving the new file name that was entered in the save as option. However this issue is comming when I open a document and use the save as option for the first time. From then on for any number of times I use the save as option it gives me the new name.

    Hi,
    In my case I am calling the script from my AI plugin(this is developed in c++) .  My plugin will be called when ever there is a event,  suppose I do ctrl+shift+s ( i,e File > Save as from Illustrator) , then my plugin will call the script.
    Script that I am using:
       var doc = app.activeDocument;
       alert (doc.name);
       var dest;
       var options= new IllustratorSaveOptions();
       dest = new File(app.activeDocument.path + '/' + doc.name);      
       doc.saveAs(dest, options);

  • Get_ddl Not giving the entire DDL

    Hi,
    SQL> select dbms_metadata.get_ddl('TABLE','CS_CSG_SYSTEMS') from dual;
    DBMS_METADATA.GET_DDL('TABLE','CS_CSG_SYSTEMS')
      CREATE TABLE "CUSTSRV"."CS_CSG_SYSTEMS"
       (    "RECORD_NO" NUMBER(15,0),
            "SY
    SQL> desc cs_csg_systems;
    Name                                      Null?    Type
    RECORD_NO                                 NOT NULL NUMBER(15)
    SYSTEM_NO                                          NUMBER(15)
    APP_TYPE                                           VARCHAR2(20)
    SUB_APP_TYPE                                       VARCHAR2(20)
    INCLUDE_FLAG                                       NUMBER(1)
    PRIN_NO                                            NUMBER(4)Why is the get_ddl function not giving the entire ddl ?
    Thanks
    Rajiv

    I think this is it ?
    SQL> set long 2000
    SQL> select dbms_metadata.get_ddl('TABLE','CS_CSG_SYSTEMS') from dual;
    DBMS_METADATA.GET_DDL('TABLE','CS_CSG_SYSTEMS')
      CREATE TABLE "CUSTSRV"."CS_CSG_SYSTEMS"
       (    "RECORD_NO" NUMBER(15,0),
            "SYSTEM_NO" NUMBER(15,0),
            "APP_TYPE" VARCHAR2(20),
            "SUB_APP_TYPE" VARCHAR2(20),
            "INCLUDE_FLAG" NUMBER(1,0),
            "PRIN_NO" NUMBER(4,0),
             CONSTRAINT "CS_CSG_SYSTEMS_PK" PRIMARY KEY ("RECORD_NO")
      USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255
      STORAGE(INITIAL 524288 NEXT 524288 MINEXTENTS 1 MAXEXTENTS 2147483645
      PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
      TABLESPACE "CUST_SML_X"  ENABLE
       ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
      STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
      PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
      TABLESPACE "CUST_SML_D"

  • Can Management Studio connect to a server that is on the same network but not on the same domain?

    Should management studio be able to connect to an instance of an sql server that is on the same network but not on the same domain?  I am trying to have it do so but am unsuccessful, so to continue to troubleshoot what the issue might be I need to know
    whether I am embarking on an exercise in futility.

    Hello,
    That's your issue!
    Since you're attempting to use Windows Authentication you'll need to start the SSMS process under the domain credentials of the domain account that has access to that SQL Server. Otherwise windows is going to send you local user token which is going to quickly
    be rejected as your local computer user account is not the correct domain account.
    You can do this by either using shift+right-click run as different user or from the command line using RunAs /user.
    In either case, if you want to use Windows Authentication you'll need to run the SSMS process as that domain user so that you can pass a valid security token.
    Edit:
    I read that backwards... If it's not on any domain (or member of a workgroup) you'll have a really hard time in using windows authentication as you're limited to LOCAL users on that machine. Thus you could really only use windows auth if you were logged
    in locally on that server. I'd either setup a SQL Login for this or join it to a domain.
    Sean Gallardy | Blog |
    Twitter

  • When I attempt to install a non-Apple app using a CD, I do not get the prompts that are supposed to occur automatically and can't find a way to make them start. I am installing Rosetta Stone.

    When I attempt to install a non-Apple app - in this case Rosetta Stone - I do not get the prompts to follow after inserting the CD.  I have searched for a way to activate them with no luck.

    Rosetta Stone does make a Mac OS X compatible version of their software.  You may be elligible for a crossgrade or a Mac version of their CD.  Or you might need to consider installing Windows on your Mac, if the disc only has a .exe file.

  • I m unable to access apple os after windows 7 instalation and its not giving the boot option

    i m unable to access apple os after windows 7 instalation and its not giving the boot option. plz any one help me out ..  how to fix it or how to delete windows 7 on my macbook

    Reboot, as soon as you hear the chime press and hold the option key, when the Boot Manager appears select OSX.

  • TS1398 my iPad isn't accepting the wifi code - states it is wrong password, though it is the same on my iPhone and laptop. Toggled wifi off/on, tried 'forgetting network' and not getting the option. IP address etc fields all blank

    my iPad isn't accepting the wifi code - states it is wrong password, though it is the same on my iPhone and laptop. Toggled wifi off/on, tried 'forgetting network' and not getting the option. IP address etc fields all blank

    WiFi Troublshooting
    iOS: Troubleshooting Wi-Fi networks and connections
    Is this happening with one particular network or with all?  Make sure iOS is updated on the device.
    Try this:
    Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
    Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
    Reset Network Settings
    Go to settings/general/reset/reset network settings. Then try to connect to network.
    If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
    If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).
    Wifi Settings greyed out or dim
    http://support.apple.com/kb/TS1559
    Recommended wifi settings
    http://support.apple.com/kb/HT4199

  • Why is a network share not showing up in time machine settings when on the wifi?

    Hi all,
    I am currently trying to set up time machine for my Macbook air. I have connected an external harddrive to the network router and made it available as a network share. I have both read and write access to the drive, when mounted as a an SMB volume and while connect to the network via Wifi. However, when opening time machine settings and trying to select the backup volume, the network drive doesn't show up.
    What's wrong?
    Kind regards,
    Martin

    Time Machine cannot backup to a SMB network volume.
    Time Machine may also have problems backing up to AFP volumes on some network attached storage devices (NAS).

  • Network shares not showing in the sidebar

    Since ugrading our clients Macs to Lion, any network shares that are managed using workgroup manager are no longer showing up in the users sidebar, and if I try to drag the share to the sidebar it stays for a second then disappears ( the sidebar preferences are set to show the shares)
    But if I eject the share and re-connect then it does appear in the sidebar as expected, and ideas how to make it show up on first connection without having to disconnect and reconnect?

    Thanks, I did delete the file several times, restating after each attempt. I also tried from guest and other user account - exact same.
    Curiously,... the 'shared" and connected devices have started to randomly reappear. I know there are devices connected all the time. So I dont know whats going on.
    Bring back SL.

  • Using my LinkSys WRT54G as a router in a home network, but not as the Gateway of the same?

    Greetings,
    I am in a situation where I share internet access with roommates. We have a Gateway which is conected to the provider and which delivers ethernet and WiFi signal.
    In order to isolate myself from my roomates and to protect my network connection, both wired and WiFi, I would like to plug in the Ethernet cable I get from the Gateway to my router, and then configure my router's firewall and WiFi enctryption to maximize my safety.
    However, I am having some problems. I have already configured the router as "router" and not "Gateway" and I am trying to assign it an IP address different from the default one, which is the one the gateway has, and a ranger of DHCP IP's, also different from those of the Gateway. In other words, 192.1681.N.1 for the router and start from there.
    Any pointers will be appreciated because so far, my efforts have failed.
    Jean-PIerre

    There are two (2) ways to cascade a Linksys router to another router:
    1. LAN to LAN – Connecting one of the Ethernet ports (LAN ports) of the Linksys router (router A) to one of the Ethernet ports (LAN ports) of another router (router B).
    This type of cascading requires the main and the secondary router to be on the same LAN IP segment to allow the computers and other devices to connect to both routers.  This configuration is recommended if you want to share files and resources within the network.
    2. LAN to WAN – Connecting one of the Ethernet ports (LAN ports) of router A to the Internet port (WAN port) of router B.
    This type of cascading requires the main router and the secondary router to have different IP addresses.  This connection makes it easier to identify which router the computers and other devices in the network are connected to since they will have different LAN IP segments.  However, computers that are connected to router A will not be able to communicate with router B, and vice versa since they are two different networks.
    Here is the link for same: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=d4bfc9fde5284a4b845c9057ffbeb644_4735.xml&pid=80&r...

  • Network shares not showing up in finder osx Lion

    The shares on my network are not showing after I tried this SMBup. I tried to follow this guide but things didn't turn up as I was expecting them to work.http://knowledgebase.hsti.com/re-installing-smb-on-mac-os-x-lion-10-7-x
    This is the official website where in the middle of the page there is a note stating that "SMBUp installs Samba, which in turn replaces Apple’s OS X’s native netbios and SMB services. This means that while connecting to servers from the Finder remains functional, the Finder won’t be able to “browse” network services and servers from the network won’t show up in the Finder’s sidebar. Be advised."http://eduo.info/apps/smbup
    So i uninstall the samba restart the machine and now my shares don't show in the left side pane of finder. How can I get them back. Is the netbios service disabled

    Open Terminal and issue the following command
    ps aux | grep netbios[d]
    if you get a line similar to this
    _netbios          45   0,0  0,0  2477156   2456   ??  SNs   9:14am   0:02.44 /usr/sbin/netbiosd
    then the daemon is running, otherwise issue the following command to start netbiosd permanently
    sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.netbiosd.plist

  • [SOLVED] Network shares not shown in File Explorers

    Hi.
    I absolutely love Arch and I am big fan because it forces me to learn...
    Time to start noob linux questions , I am sorry...
    So....
    In any GUI file manager I am not able to see most of my network shares... Till this point I was mainly using Mint, Ubuntu etc and obviously everything comes preconfigured, so I never had this problem.
    I have installed Manjaro on same machine just to see if I will have same problem, but there I am able to browse network shares on Nautilus and Nemo out of the box. On Arch I can find only local host and one other share (as on the picture).
    Initially I have thought that this is due to network configuration but I have checked with
    smbtree -U
    and I get:
    WORKGROUP
    \\WDMYCLOUD WD My Cloud
    \\WDMYCLOUD\Public Public
    \\WDMYCLOUD\BrightSide
    \\WDMYCLOUD\Aneta
    \\WDMYCLOUD\Piotr
    \\WDMYCLOUD\IPC$ IPC Service (WD My Cloud)
    \\ROUTER Router
    \\MINTSERVER MintServer server (Samba, Linux Mint)
    \\MINTSERVER\SamsungPrinter Samsung Printer on Mint Server
    \\MINTSERVER\print$ Printer Drivers
    \\MINTSERVER\DyskDomowy1
    \\MINTSERVER\IPC$ IPC Service (MintServer server (Samba, Linux Mint))
    \\KOMPUTER_MADZI
    So Samba is discovering just fine...
    I tried to research on it but no luck so far, maybe I am looking for wrong thing.
    Can someone point me out what I am missing here? Should I enable some sort of service to be able to see and browse those shares in file explorers?
    Thanks for any kind tip
    Last edited by hede0n (2015-01-21 19:43:50)

    Ok.....
    After few reboots it started to work on its own....

  • In Nautilus, mounted network shares not showing up right away

    I've noticed a strange problem recently (last couple of weeks) where my mounted network shares don't always show up right away in Nautilus (side bar or desktop- like they used to). For example, if I manually mount an NFS share in CL to /media/files it won't pop up in Nautilus right away like it used to. It will only show up after several minutes or if I plug in a thumb drive to trigger it to refresh. Also, when my computer is in suspend and I resume it, all predefined network share mounts in fstab that are indeed mounted won't be present in Nautilus upon resuming from suspend (they did before).
    I'm not sure where the problem lies as Nautilus or dbus haven't been upgraded in the repositories recently. I tried looking at recently updated packages but I can't pin it on one that would be causing the problem. I'd like to get an idea of what packages are affected before submitting a bug report. If anyone has any idea on the package I can downgrade no problem and test this further.

    Figured out the last filesystem upgrade from Decemeber is causing this. Bug posted- FS#27851.

  • Network is not reading the appropriate DNS Settings

    I went through many trouble shooting rounds with Time Warner Cable to discover that the modem isn't the problem. I also tried replacing my ethernet cable and setting up an entirely new location which resulted in the wrong ISP numbers for TWC.
    I am at my wits end with this issue because internet access is must in our home.
    Problem:
    In short the network settings are not giving me the right ISP numbers and no one can tell me why or how to remedy the issue. Is my Ethernet port burned out?
    Message was edited by: Toyaburris

    Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
    If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
    208.67.222.222
    208.67.220.220
    (You can also enter them if you click on Advanced and then DNS)
    An explanation of why using Open DNS is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
    Wikipedia also has an interesting article about Open DNS:
    http://en.wikipedia.org/wiki/OpenDNS

  • Apps wanting to access my location when not in use (and not giving the option to turn it off)

    For most apps, I can choose to share my location 1) not at all; 2) when the app is in use (my favourite); 3) always (even when not in use).
    Why do some apps not offer the second option?
    For instance, I want to use an app that locates the nearest automatic external defibrillator (if someone has a cardiac arrest) but I can only use the app when I allow the app to access my location all the time. Given the fact that I will use this app perhaps only once every 15 years, I see no point in giving them my location for the next 15 years! That's just a waste of battery power and also a breach of my privacy.
    Second example: Apple's own weather app. I check the weather maybe once every month. I do not want the app to locate me all the time. But I can only choose between option 1) and 3) above.
    Is there a technical reason apps work like this? Or are they just sneakily trying to get as much information about me as possible?
    Thanks for your thoughts.
    PS: I am using iphone 6, iOS8.3

    everything rudegar said is right on.  Still, 10% overnight is more than you would expect - so something is still running.  try-
    double click the home button, and see what apps are listed as recent.  one or more of them might be still churning away.  it is a good idea to close those out fully every night.  Any of those apps with notifications or location services may be checking in every now and then and using your power.
    you mentioned airplane mode is 'off'.  this may be a terminolgy thing - but having airplane mode 'off', means that the radios are on.  WiFi, and 3 G if you have it.    turning airplane mode "on" turns off the radios.
    with everything off on mine - (except I leave the wifi on) -  i use 2 or 3% overnight. 
    But if you really want it off - do what rudegar says.

Maybe you are looking for