Network users not showing up

I installed a clean 10.5 standalone server and put in two users. Then I went in WGM and upgraded to advanced mode and set up mobile home directories for these two users. After binding a clean 10.5 client machine, the login window does not show any of the network users despite saying the 'network accounts available'. What tools can I use to diagnose this problem?
Thanks for your help,
Tom

Called the friendly folks at enterprise support. They were having their own troubles getting their network users to work and basically told me to wait until 10.5.1. Is there anything wrong about upgrading a standard standalone server to an advanced configuration with regards to network users? I would prefer to go this route since the standalone server sets everything else up just the way I want it. How can I probe whether the client is getting all the required information through Open Directory?
Thanks in advance for any help.
Tom

Similar Messages

  • Network users not showing up at login screen

    Hello, I am new to Server and I have set up an Open Directory setup (using smb for home folders, I heard that it was faster or something somewhere) on my server iMac 27".  This iMac is running Mavericks 10.9.4 and the latest version of Server 3.  On my client iMac 24", I have bound the server to the iMac, as evidenced by the green dot next to the server IP in System Preferences Users and Groups.  The iMac is running Mavericks 10.9.4 as well.  For the network accounts, I have chosen to store the home folders on the server itself, so they are not mobile.  When I try to log in to the network accounts from the client iMac 24", the "Other..." selection does not appear so that I can input the username and password for the network user.  However, I am able to log in to the network accounts just fine from the server iMac 27", as well as another MacBook running Lion 10.7.5.  How can I get the "Other..." selection to show up on my login screen so that I am able to log in to the network accounts?
    And yes, "Allow network users to log in at the login window" is checked.

    Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
    1. The OD master must have a static IP address on the local network, not a dynamic address.
    2. You must have a working DNS service, and the master's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
    3. The primary DNS server used by the master must be 127.0.0.1 (that is, itself) unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
    4. Follow these instructions to rebuild the Kerberos configuration on the master.
    5. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases.
    6. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
    7. Reboot the master and the clients.
    8. Don't log in to the server with a network user's account.
    9. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.

  • Network shares not showing up in finder osx Lion

    The shares on my network are not showing after I tried this SMBup. I tried to follow this guide but things didn't turn up as I was expecting them to work.http://knowledgebase.hsti.com/re-installing-smb-on-mac-os-x-lion-10-7-x
    This is the official website where in the middle of the page there is a note stating that "SMBUp installs Samba, which in turn replaces Apple’s OS X’s native netbios and SMB services. This means that while connecting to servers from the Finder remains functional, the Finder won’t be able to “browse” network services and servers from the network won’t show up in the Finder’s sidebar. Be advised."http://eduo.info/apps/smbup
    So i uninstall the samba restart the machine and now my shares don't show in the left side pane of finder. How can I get them back. Is the netbios service disabled

    Open Terminal and issue the following command
    ps aux | grep netbios[d]
    if you get a line similar to this
    _netbios          45   0,0  0,0  2477156   2456   ??  SNs   9:14am   0:02.44 /usr/sbin/netbiosd
    then the daemon is running, otherwise issue the following command to start netbiosd permanently
    sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.netbiosd.plist

  • Wireless network connection not showing up in network connections

    Hi, Experts,
    I recently re-image my Toshiba laptop (using window xp installation disk) due to I deleted few system files accidentally and can not boot the system up.
    Before I re-image, I have no problem to connect Fios internet. After the re-image, the wireless network connection not showing up in network connections, so I cannot set up my Fios internet. 
    How to set up the  wireless network connection that it will show up in network connections?  Thank you very much for your help. 

    Issue Resolved.  I did not turn on the wireless switch.

  • Adding shared printers? Network printer not showing up in list

    I have a network printer not showing up in the Bonjour Printer Wizard. There is not a place to add a printer to this list. Does my network printer need to be installed under the Windows side as well, or can I share it using Bonjour? I'm confused as to how the shared printer program works. Also, my Adobe "print to pdf" option shows up as a printer, but how do I change the file destination location? It doesn't give me an option to change the "saved to" location. I am using these printers through Parallels in AutoCad, and that should be the only reason I will need to share printers. But I am in AutoCad a good deal of time, so I need to know how to quickly print my drawings.

    Welcome to the forums!
    You don't say if you installed after downloading the Printer you deleted, but I suspect it's one not showing, and that you need to reinstall.

  • Why is it my network does not show up any longer on wifi for ipad? Have tried network reset still not tere  cannot go to internet

    have tried network reset but my network is not showing cnnot access internet.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iphone problem is network bar not show for searching why how can resolved my iphone

    my iphone problem is network bar not show for searching why how can resolved my iphone
    my iphone model is MD239B/A
    my iphone serial no: DQ******TD2
    <Edited by Host>

    Hi mirza_ali,
    The article below may be able to help you with this issue.
    Click on the link below to see more details and screenshots. 
    iOS: Understanding cellular data networks
    iPhone: Wireless carrier support and features
    I hope this information helps ....
    Have a great day!
    - Judy

  • Ort Express- my network suddenly not showing up. System preferences, advanced/network shows network. Opened Airport Utility options grayed out except configure other but no luck. No set up assistant option to reenter.  Not sure where to go from here?.

    Airport Express.
    My network suddenly not showing up.  Openend system preferences/Network & my network is there. When I open Airport Utility, most option are grayed out except "configure other" with no change.  Utility does not provide option for setup assistant where I could just start over.  So no wifi without network set up and can't use ethernet/router to troubleshoot.  I am stuck any assistance helpful.

    So I went back to the PC after my original post, and somehow I was able to connect to the AirPort wireless network in the Windows Wireless Network List. Once I did this, it showed up in the AirPort Utility, and I was able to access the internet. I have no idea what fixed the problem, but maybe it was simply a matter of waiting a few minutes before connecting to the network?

  • Network devices not showing up under "shared" in finder bar

    Ok so i have a network that consists of a maxtor nas device, 2 win xp pc's, 1 win7 pc, d-link 524 router, and my macbook pro. I would like to be able to transfer files between my mac and the devices and use the printer attached to my maxtor. My issue is that none of the computers show up under the "shared" section of finder or under network. I use to have this issue with leopard but it resolved itself. Now under snow leopard for a couple months and i have yet to get it work. I can access my mac and other pcs from a pc. Anyone know how to get my network to show up on my mac?

    Your problem is very common under Snow. At first my shares did not show up under shared in finder windows. I, then, of course, used "Connect to Server" to connect to the shares--both Mac and PC. I found that the more I kept the shares active the more likely they were show up under shared. Then, I discovered that if I kept the computers from sleeping during the period of needed access they would tend to stay in shared without nearly so much keeping the connections active.
    If you do not like the above work around, then there are two other possibilities. You can elect to show mounted items on your desktop. Do that and connect to each share. Then, go > users > unlock > + login options > try dragging the mounted shares to the login item window. If successful, then the shares should be available at login.
    Another approach is to mount and connect as indicated above. Then, making an alias to the share should at least make things faster.

  • User not showing in Buddy List 10.9.4 Server/3.1.2

    I have added a new user to our server, but for some reason they are not showing up in others' Buddy Lists to be able to message them on a local network. If I enable Bonjour they show there, and they are able to access the file server just fine. To make the situation more confusing, looking into the logs I see them appear to be connecting to the chat server correctly. Any ideas as to what may be wrong?
    Aug 21 05:47:08 mavserve.local jabberd/c2s[3995]: Authentication succeeded, mech: DIGEST-MD5 client IP: ::ffff:192.168.1.46 client port: 49190 username: krislg
    Aug 21 05:47:08 mavserve.local jabberd/c2s[3995]: int od_auth_check_service_membership(const char *, const char *): checking user "krislg" access for service "chat"
    Aug 21 05:47:08 mavserve.local jabberd/c2s[3995]: int od_auth_check_service_membership(const char *, const char *): mbr_check_service_membership returned 0
    Aug 21 05:47:08 mavserve.local jabberd/c2s[3995]: int od_auth_check_service_membership(const char *, const char *): user "krislg" is authorized to access service "chat"
    Aug 21 05:47:08 mavserve.local jabberd/c2s[3995]: [10] DIGEST-MD5 authentication succeeded: [email protected] ::ffff:192.168.1.46:49190 TLS
    Aug 21 05:47:08 mavserve.local jabberd/c2s[3995]: [10] bound: jid=[email protected]/kris's iMac
    Aug 21 05:47:08 mavserve.local jabberd/sm[3993]: session started: jid=[email protected]/kris's iMac
    Thanks in advance!

    I was able to message the user directly [email protected] and he received it fine, apparently he is just invisible in the Buddies window. Stumped.

  • AD Users not showing up in Workgroup Manager

    Hi, I'm configuring a new installation of 10.4 server on an Intel Xserve to integrate with an already existing AD domain and provide group policies to Mac users via OD.
    So far, the install has been so smooth, fast, and simple. The Xserve has been joined to the AD domain, Kerberos is running, and I have an active OpenDirectory Master.
    Now, when I go to Workgroup Manager, the users in the AD domain do not show up and if I try to authenticate with the same username and password I used to bind to the domain I get the error "The login information is not valid for this server". Also, if I use dscl I can navigate to "/Active Directory/All Domains/Users" but if I try to run ls I get "ls: DS error: eDSCannotAccessSession".

    Hi Tim
    You are almost there but not quite.
    Firstly its not important if the AD Server does not have a reverse pointer. As long as the OD Master does that should be enough. Ultimately it would be better if there was one configured but there is not much you can do about that is there? I doubt very much if the AD Admin is going to want to fiddle with a 'live' DC's DNS Service if its likely to affect his domain?
    What I generally do is this:
    Make sure SMB Digital Signing is Not Enabled on the AD Server. There should be at least two places where this has to be disabled. If the 'powers that be' have defined SMB Digital Signing then SFM (Services For Macintosh) must be installed. If its 'nada' to both then you will be severely limited in integrating OSX Server and mac clients with AD. Yes of course make sure there is an (A) and Reverse PTR for the mac server. Next bind all mac clients to the AD Server and make sure the AD Server is listed first for Authentication and Contacts, also make sure mac clients are using the AD for authentication. Test and verify a mac client to see if (a) home folders are created and accessed and that mac clients successfully log in. You sometimes don't get the two.
    Now turn your attention to OSX Server. Make sure you have (a) reserved a fixed IP address for it in the AD's DHCP Service and you have placed the AD's IP address as the primary IP address in the DNS Server's field in the Network Preferences Pane (b) tested DNS fully and that OS X Server resolves correctly on the forward and reverse pointers for itself. Now bind OSX Server to the AD using the Active Directory plug in in Directory Access and an AD admin account that has authority for the Domain. Launch Workgroup Manager and you should see AD Users and Groups have 'flowed' into the /Active Directory/All Domains node. Quit out of WGM and launch Server Admin. Enable the AFP Service and set the authentication method to Any Method. Select Open Directory and change the Role from Standalone to Open Directory Master. You will be prompted to create the default Directory Administrator account diradmin (UID 1000). You should see the Kerberos Realm and search base fields autofill with the fqdn of the Server. Change both of these to reflect the fqdn of the AD Server. For example if the fqdn of your mac server is osxserver.addomain.com and the windows server is adserver.addomain.com then change the information presented in thos fields to ADSERVER.ADDOMAIN.COM and dc=adserver,dc=addomain,dc=com. As you can see you should only need to change the first part. Click OK or Continue and you should now have an OD Master that is not the KDC (Kerberos has been stopped). This is the state you want it be in before going any further. You can now 'kerberize' the AFP Service you started previously by selecting the kerberize button and using the same AD admin account you used to previously bind the server to the AD. To doublecheck if the AFP Service has been kerberized launch terminal and issue:
    sudo kadmin.local -q list_principals
    You should see an entry for [email protected] amongst others.
    Now launch Directory Access and make sure the server's loopback address is listed in the LDAPv3 plug in. Make sure that the server is listed first in the Authentication and Contacts fields. Quit out of Server Admin and launch WGM. Navigate to the /LDAPv3/127.0.0.1 node and you should see diradmin waiting for you. Open another connection window in WGM and navigate to the /Active Directory/All Domains node. When you authenticate the /LDAPv3 node you use diradmin, when you authenticate the /Active Directory node you use the AD admin account. Create a Group in the /LDAPv3 node select the + icon and toggle between the two nodes as you select users or groups and add them to your /LDAPv3 node. Once you are happy select a preference to manage, apply desired changes and save the changes. This is better done on a client machine with the Server applications installed.
    Back to your mac clients. Begin to join these to the LDAP node using the LDAPv3 plug in in Directory Access. Use the Server's IP Address or its FQDN if the DHCP Server is also doling out DNS information to networked clients. Its IP address should be good enough. Don't bother with authenticated binding and make sure clients are not using the OD master for authentication and contacts. Lastly make sure the Active Directory/All Domains and the /LDAPv3/OD Master IP address or fqdn are in that order for browsed directories.
    Its best if you have a secure local admin account on all your mac clients and that each mac is named differently. Set this in the Sharing Preferences Pane.
    Begin to test. If everything is OK you should now have mac clients logging into home directories controlled by AD as well as OD Managed Preferences being applied.
    One final thing. Avoid using .local as the basis for the DNS Service. I realise in your environment you have no control over that. In which case make sure all mac clients have the AD's .local domain name in the Search Domains field in the Network Preferences Pane. If your clients have Leopard installed you should not have to bother as Leopard copes with .local name resolution better than previous versions of the OS.
    As ever how successful you are and how long it takes will depend mostly on how well the AD is configured. There is no magic bullet that can be used on the mac side to fix a poorly configured AD environment. If everything is as it should be regarding the AD Server it should not take you longer than 10-20 minutes (after server installation) for the server and possibly 2-3 minutes for each client. It really should not take that long.
    Does this help?
    Tony

  • Network users not appearing on login screen

    Hi all. I have just started setting up Lion Server for my household however have a slight issue with allowing network users to logon to devices. If I allow usernames and passwords to be typed in manually then network users can login, however if I want to have them show up as users on the login screen it doesn't work.
    Is there a way for network users to be visible on the login screen at all times please? There are only two network users in my house.
    Thanks,
    Jordan

    See my reply here https://discussions.apple.com/message/16280642 where I previously described how to do this.You will need Workgroup Manager installed for Lion if you have not already downloaded and installed this. You can get it here http://support.apple.com/kb/DL1419

  • Network Location not showing domain name in Server 2012 R2 after demoting 2003 PDC

    The single active NIC in my new Server 2012 R2 no longer shows the Network Location of "DOMAIN.LOCAL" like it did before I demoted the only Server 2003 domain controller. The NIC now shows "NETWORK" as the Network Location.
    The registry still shows a Profile with the correct PROFILENAME in
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles
    but that name does not show up in the Network List Manager Policies inside Local Security Policy.
    The 2012 R2 Srv has all of the FSMO roles, Client PC's can connect to the domain but will not get new map drives from a script, they must be created manually. My Quickbooks Enterprise clients cannot see the QB Server Manager on this server and I think it
    is related to this issue because of firewall restrictions.
    The Windows Firewall pointed me in this direction because the "Private Networks" is connected to my NIC named "Network" but the Firewall "Domain Networks" is reported as "Not connected."
    Any Help is appreciated,
    CrazyDog

    Hi,
    Based on my research,
    Network Location Awareness (NLA) service expects to be able to enumerate the
    domain’s forest name to choose the right network profile for the connection. The service does this by calling
    DsGetDcName on the forest root name and issuing an LDAP query on UDP port 389 to a root Domain Controller.
    If something hinders the DNS name resolution or the connection attempt to the DC, NLA is not able to set the appropriate network profile on the connection.
    Therefore, I suggest you check the DNS settings on DCs and other domain-joined machines, which should point to the existing DC as preferred DNS server, and secondary DC as alternate DNS server, IP address of demoted DC should be
    removed. In addition, please do not use loopback IP address.
    Here are some articles below I suggest you refer to:
    Network Location Awareness (NLA) and how it relates to Windows Firewall Profiles
    http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
    Network Location Awareness
    http://technet.microsoft.com/en-us/library/cc753545(v=WS.10).aspx
    Complete Step by Step to Remove an Orphaned Domain controller
    http://msmvps.com/blogs/acefekay/archive/2010/10/05/complete-step-by-step-to-remove-an-orphaned-domain-controller.aspx
    Best Regards.
    Amy

  • Error for Budget exceeded for Network does not show up while creating PR.

    Hi SAP Gurus,
    We have an issue while creating a purchase Requisition from Network. When we enter the Toatal Amount in the PR and if the total Amount is greater than the total Budget for the Network, the error "For item 001 Ntwk actvty XXX &  WBS element XXX budget amount XX USD exceeded " is not showing up in the foreground by the system and hence not able to create PR. It seems that while trying 30-40 times, the system will show this error in the foreground once or twice only and we want this to be appears in the foreground consistently. Can you please advice how to fix this? Thanks,
    Reagards,
    Imran.

    Hi,
    you need to maintain sufficient budget in respective WBS element by using transaction CJ30 and by releasing budget through CJ32.
    Check the budget availabilty in report s_alr_87013558.
    It will resolve your issue
    Regards,
    Sandesh Sawant

  • New users not showing up while trying to set folder permission settings

    Server 2012
    This is a new virtual domain server and file server in a starwind cluster, I just started migrating users last week.
     This last weekend (two days ago) the cluster crashed while doing windows updates on this server. I have been unable to get it to download any updates since without crashing, not sure if that is related to this issue somehow.
    I added some new users today and got them all logged in and their data transferred over. good. But then I went to this shared folder that everyone has a mapped drive too and tried to add them in the security tab of a sub folder but their accounts will not show
    up when I search for them. Any account I added previously to last weekend  show up, students, mine, etc.
    even if I select the exact OU the accounts are located in, even if I type their whole name and domain. In AD the accounts are there.
    If I log into the backup domain controller Their accounts show up there while in a folder security settings tab. They are listed in active directory on both domain controllers.
    I have exhausted myself on Google search.
    What the heck did I break?
    Maybe I should run 
    DISM.exe /Online /Cleanup-image /Restorehealth
    Not sure if I will lose any data doing that or what the repercussions would be..

    Hi Dustin,
    If the DC is having USN rollback issue, we can resolve it by demote then re-promote or restore the DC using a supported method such as using System State backup to restore.
    More information for you:
    USN Rollback, Virtualized DCs and improvements on Windows Server 2012
    http://blogs.technet.com/b/reference_point/archive/2012/12/10/usn-rollback-virtualized-dcs-and-improvements-on-windows-server-2012.aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Maybe you are looking for