New 17" MacBook Pro Brightness always changing

Just got a brand new MacBook Pro. Like it but the screen brightness keeps changing and its driving me nuts! Often the lights on the back lit keyboard come on and off, for apparently no rhyme or reason. Crazy. Anyone know what's going on? Or how to turn off auto-brightness, or lower its' sensitivity to light changes? This is ridiculous.
Thanks,
Jeff

hummm....even after turn the "Automatically adjust brightness as ambient light changes" the lights that backlight my keyboard continue to blink often!! Often several times in a row....on/off/on/off!
It appears the keyboard back lighting is controlled separately from the screen, as I suppose it might be.
Ahhh......yes in the Keyboard control panel you can turn off "Illuminate keyboard in low light conditions"....and manually set the back lighting with the F5 and F6 keys. Ok, new stuff to learn about that was not on my old PowerBooks

Similar Messages

New refurb Macbook Pro (2010 build)-change to Snow Leopard with TM backup?

During the startup of the new MacBook Pro (Refurbished MacBook Pro 2.66GHz Intel Core i7 that shipped with Lion installed) it asks if I want to use a Time Machine backup to migrate my stuff. If I use a Snow Leopard Time Machine backup will the new computer now run on Snow Leopard? Or will it convert the backup to Lion?

Check this link:
http://pondini.org/TM/14.html
This should put you on the right track.
Ciao.

I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion

I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion

NicholasLiban -
When you use the Lion restore as described, it does a fresh install on the hard drive that you can select at the beginning of the process. This provides a complete install of the very latest version of Lion, including the recovery partition. The drive that you choose for the installation destination winds up like what you would have on a brand new computer from Apple.
- Randy

I've got a power cable from my 2011 macbook air which I would like to use as a spare cable for my new 2013 macbook pro, but the design has changed. Is there an adapter available so that I can use it?

I've got a power cable from my 2011 macbook air which I would like to use as a spare cable for my new 2013 macbook pro, but the design has changed. Is there an adapter available so that I can use it?

Welcome to the Apple Support Communities
Use the MagSafe to MagSafe 2 Converter > http://store.apple.com/us/product/MD504ZM/A/magsafe-to-magsafe-2-converter?fnode =51 However, note that the MacBook Air doesn't provide enough energy to charge the MacBook Pro with Retina display, so it could not work

I had to change to a new Apple MacBook Pro. I deauthorized my old computer, authorized the new one and less than a quarter of my media shows up in the new computer. Everything that was downloaded from a cd is missing. Any help?

I had to change to a new Apple MacBook Pro. I deauthorized my old computer, authorized the new one and the only media that shows up are items with a cloud. Everything that was downloaded from a cd, including personal movie files, are missing. It's as if my former library is gone. How can I find it again? Or is this just Apples way of screwing with me?

No. Firewire and Ethernet are not the same. Ethernet would be used to connect the computers to your network. A Firewire cable is used to connect the computers directly. They are different ports.
The above shows what an Ethernet port and a Firewire 400 port look like.
These are the plugs used for FW800 on the left and FW400 on the right.

I have a new MacBook Pro. I changed settings so I can just TAP on the computer, but on iPhoto I must press hard to drag mouse around. Anyway to change iPhoto to TAP?

I have a new MacBook Pro. I changed settings so I can just TAP on the computer, but on iPhoto I must press hard to drag mouse around. Anyway to change iPhoto to TAP?

Hugo999 wrote:
For some reason I can't see Larry's last reply...
That is an extremely agrevrating "feature" of the JIVE software that Apple choose to drive these discussion forums - and today it is especially bad
LN

OSX 8.2 new Retina Macbook Pro won't wake from sleep.

Since upgrade to OSX 8.2 new Retina Macbook Pro won't wake from sleep. Tablet lights are on in morning and fans running like crazy, but it requires hard quit and start. Tried with no apps running, no change. It was fine before this last update. Wasn't the recent firmware update supposed to fix this issue? It seems to have started one for me.

I have the exact same problem with my Macbook Pro OS 10.8.4. What happens is: I work on the train, press cmd/alt + eject to put to sleep..pop it in my bag...get home or office... open the lid...and nothing! Battery indicator shows I have plenty of juice but it will not wake up no matter what key I press.
The only difference between use on the train and home/office is the plugging in of peripherals and mains power. It happens sparadicially, perhaps once or twice a week and I always send a 'panic report', so somewhere there will be approx 20 reports of this fault at Apple.

New unibody macbook pro time machine backup stalling/stalls

I have been using time machine to back up my Macbook Pro 17 (First Gen), I have 2 external Western Digital Drives connected via USB in a RAID (Striped) Configuration. Everything has worked fine for months and the backups are quite snappy...
I just changed to a NEW Unibody Macbook Pro 17 and formatted the drives, set up the RAID configuration again from fresh in disk utility and reset Time Machine and said OK when it requested to use the drive for backups.
The process gets some way into backing up... sometimes 7GB, 13GB, 17GB even 70GB and then just stops. The hard drives(at least one of them anyway i cant tell exactly) spin down and the file count in Time Machine window just stops. There is no error message and the window just stays there saying its backing up but there is no external HD activity. I have to cancel the backup (which sometimes - but not always - causes everything to stall until i unplug the drives by whipping the USB cable out). Everything then works fine i dont need to restart and it just brings up an error message saying that Time Machine failed to backup...
Any ideas??
I do have antivirus software installed (VirusScan) but i have had that on my previous machine aswell so it cant be that...

I have a MacBook C2Duo (black 2008) customer who has upgraded to 10.5.7 with a new internal and external hard disk and a fresh install of the OS. After doing this, Time Machine constantly stalled at 12.55 GB when backing up to an external disk (USB2). After a lot of reading on the net, I think the problem marks the re-emergence of an old bug where the mdworker task used by Spotlight to index drives is crashing and starting to take up to 99% of the CPUs. At this point, TM simply does not have enough CPU time to work and crawls almost to a halt.
I messed around for a while with Activity Monitor watching the mdworker crash and it is very predictable. Time Machine buddy does not pick it up because of course TM is still working albeit at a snail's pace.
Since mdworker is very associated with Spotlight, I tried setting Spotlight to not index any folderssame problem.
Finally, I set the TM destination drive to be a Private drive in the Spotlight Preferences and it finished without an mdworker crash.
It might be a temporary workaround or it might be coincidence that TM worked this time, so YMMV and Apple should look at this too.

Windows 7 install and/or environment freezing on new 13" MacBook Pro

Hello! Long post, trying to give as much detail as I can... thank you in advance for your help on this!!
I think I posted in the incorrect forum earlier -- reposting here where it's more relevant.
I have a frustrating issue I've been battling all weekend. I can't seem to figure it out.
I'm trying to set up dual boot (Boot Camp) on my new 13" MacBook Pro, installing Windows 7. I've tried x64 (preferable) and x86. This is the mid-April 2010 13" MacBook Pro. C2D 2.4GHz, 4GB RAM, 250GB HD, nVidia 320M.
The problem I'm having is the machine is hard-locking. Sometimes it locks up during install (the 2nd phase, after it restarts and is "Completing Installation" (this step: http://spsexton.files.wordpress.com/2008/11/install-13.jpg). This makes me have to restart the installation completely, which is frustrating. Sometimes it locks up at the login screen. Sometimes it locks up once I'm logged in to Windows.
I have noticed that if the installation completes and I can get to the desktop, I can generally use it OK until I install the Boot Camp Drivers (3.1, from the 10.6.3 install DVD). I had a hunch and had also read that it may have to do with the nVidia drivers it installs, so I have tried uninstalling those prior to restart. It locks up anyway at restart (during login). Note that this generally is the case -- sometimes it locks up before I even get to the Boot Camp Drivers step. I sometimes can then get in to Safe Mode without it locking (sometimes it does, sometimes it doesn't), and I think I had some repeated errors in the Event Viewer that appeared erroneous (certainly not errors that should cause a hard lock) -- I can post these if needed when I get home from work this evening.
I was having consistent lockups during installation (at the "Completing Installation" step I mentioned above) when I'd let the Boot Camp Assistant set up the partition for me. I thought BCA might be doing something funny, so I set up the partition myself using Disk Utility then installed, and the install went in OK, however I still had it lock up after installing the Boot Camp Drivers.
Here's the steps I've been following:
1. Partition drive, either using Boot Camp Assistant or Disk Utility. Format to FAT if using Disk Utility.
2. Boot into Windows installer
3. Format drive to NTFS in installer
4. Install
5. Reboot
6. Complete install (often locks here as mentioned above)
7. If install completes, boot in to Windows
8. Change some system settings -- temp folders, workgroup name, pagefile size, turn off UAC
9. Reboot
10. Install Boot Camp Drivers from DVD (sometimes locks before I get here)
11. (have tried sometimes) Uninstall nVidia drivers installed by Boot Camp
12. Reboot
13. Consistent locks
14. Start over, both trying a new Partition creation (delete old, expand Mac partition, recreate new partition via BCA or DU), or using existing partition
Some other details:
1. This environment seems to work fine via Parallels. I only appear to have locking issues if I try to boot natively.
2. The Boot Camp Drivers installs a bunch of driver crud for devices the machine does not have. Could this be causing an issue? Drivers that Windows is attempting to load and failing, thus causing issues?
3. I'm mainly trying to install x64 due to the 4GB of RAM -- could this be an issue with the Boot Camp Drivers and Windows x64?
4. I don't think this is a motherboard issue as the machine is completely stable otherwise -- I'd think that if it was a hardware failure, especially with the motherboard, I'd see other issues elsewhere..
Any ideas??? I'm pulling my hair out on this one. The machine is brand new (just got it Tuesday last week, just started using it this last weekend). My last MacBook Pro (previous model 13" MBP) took Windows 7 without a single hitch and ran smooth as butter.
Help?

i just got some solution for this... dunno whether it will work for u all... anyone who got the same problem... try to press power button right on welcome screen after u type ur username and password.... or if u didnt put a password, u can press the power button right on the welcome screen... and then it will automatically to the lock state... and then u login again... the windows will appear... i work it on windows 7 64 bit... if u can login for that 1st time, for next time, u dont need to press the power button anymore... for me it works... XD
cheers...
gud luck for u all... =)
Message was edited by: conggg

MacBook Pro: I have changed my old apple id address but cannot now update apps as it sees my old apple id name as the primary holder. I decided to edit back to the old apple id but it won't allow me to do so. What else can I do?

MacBook Pro: I have changed my old apple ID address but cannot update apps now as it still reverts to my old ID address as the primary holder (it is the apple ID that I have purchased the apps, etc). I have tried to edit back to the old address but it will not let me type in the address and there is no blue edit sign on the rhs. What can I do to rectify this problem?. Is there a waiting period after editing an apple ID address? I have spent the good part of yesterday searching the net and know that there is a major problem with this but wondering if anyone has found a solution. Thank you.

Hello Jamcef,
Thank you for the question. Use these steps to change the Apple ID signed into the iTunes Store:
Sign in with a different Apple ID
Tap Settings > iTunes & App Stores.
Tap your Apple ID.
If you see the option to Sign In, you can change your Apple ID now.
Tap Sign Out.
Enter your Apple ID and Password and tap Sign In.
Or if you don't have another Apple ID, tap Create New Apple ID.
You can find the full article here:
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht1311
Thank you for using Apple Support Communities.
Best,
Sheila M.

CS5 Photoshop/Bridge/Suite not working on new Retina Macbook Pro, running Mavericks 10.9.2

I recently purchased a new Retina MacBook Pro laptop running Mavericks OS X 10.9.2. I had Apple perform a data migration of all my apps and files from my older laptop onto the new one. Now when I go to open Photoshop CS5 I receive the following error message, "Could not synchronize the color settings because of a program error." Photoshop will then open but I can't do anything in the app. When I go to quit Photoshop I get this error message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the 'Get Info' command in the Finder to unlock the file or change permissions on the file or enclosing folders."
I am able to open Bridge, however the app in entiretly is noticeably lo-res and pixelated looking, so clearly something is not up to speed there either.
InDesign and Illustrator are also having issues.
I have run the System Update and it does not show anything in the CS5 Suite needing to be updated.
Please advise! Thank you.

I do not get the Airplay icon on my Macbook's menu bar. I have checked the box in the Display settings to show mirroring options but still no icon. Airplay Display shows 'No device Detected'. Both AppleTV and MacBook Pro are on the same physical Network (192.168.1.0/24) and connected directly to my home ethernet switch (not wirelessly). I also made sure MacBook's Firewall is disable. Airplay feature use to work before upgrade to 10.9.2. As far as Home sharing from my AppleTV has a similar issue; it just does not find my MacBook after a while of loading and searching my music library. I am logged in to icloud on both devices (appletv and macbook). Also use to work before upgrade. Any ideas or recommendations. Thanks.

New 2011 macbook pro 13"-

Just got a new 2011 macbook pro 13".
What is the best way to run my guitar into it, to record in garageband without latency issues?
Thanx in advance for your help
Lonesomedave-

davefromlexington wrote:
The problem for me is that I've read reviews on several of the interfaces on the list I was directed to, where one person had no latency issues, and then somewhere else the poster/reviewer testifies that they were plagued by latency issues.
After forking out the cash for a new Mac and then a couple more for an an interface, that'd be a tough pill to swallow!!
Fortunately, it's not one you have to worry about.
The latency you're talking about is caused by the computer, not the interface:
The interface converts the audio from analog to digital and sends it into the computer. Once in the computer, it gets sent into Garageband (or whatever audio program you're using), and any effects you've selected are applied to it, and then it is sent back out to the interface to be reconverted into an analog signal you can hear.
All the "heavy lifting" occurs in the computer itself, so the source of latency is really the time it takes the computer to process the audio, apply the effects algorithms, and send it back to the interface.
(There is latency in any circuit, but the latency in the interface itself is negligible compared to how long it can be delayed in the computer).
Your new computer is plenty fast (and has enough RAM) to do basic recording without latency.
I'm guessing you won't even have to resort to the kind of "zero latency" local monitoring that Hangtime suggested (i.e. listening to your signal locally, bypassing its journey into your computer, through its algorithms, and back out again). Although as it's true that doing that always provides the least latency of all, if that's an important safety net for you, you might want to get an interface with that feature - a number of them now offer it.
But I would guess that if you plug any contemporary interface into your computer, and plug your guitar into it, you shouldn't be bothered by latency.
FWIW - a good online source for gear is Sweetwater. Here's their audio interface page for Firewire:
http://www.sweetwater.com/c683--FireWire_Audio_Interfaces
... and for USB:
http://www.sweetwater.com/c695--USB_Audio_Interfaces
Firewire interfaces tend to be higher end than USB, but cost a little more as well.
Good luck!

Brand new 15" MacBook Pro Retina - unplugged from Thunderbolt Display and Keyboards today find keyboard alpha-numerics not working; except the function keys, delete key, tab key, command/ctrl/shift/alt/fn and arrow keys; and 7/8/9/u/o/j/l nudge cursor

Brand new 15" MacBook Pro Retina - unplugged from Thunderbolt Display and Keyboards today find keyboard alpha-numerics not working; except the function keys, delete key, tab key, command/ctrl/shift/alt/fn and arrow keys; and 7/8/9/u/o/j/l produce cursor nudges.

It's a new machine - and the Thunderbolt Display is meant to work with it. You need to just make an appointment at your local Apple Store and have them fix whatever is wrong.
If you like, you could always try a SMC reset and a PRAM/NVRAM reset to see if either of those will get your keyboard back in working order...
Clinton

Please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

Found these instructions here:
https://discussions.apple.com/message/15388885#15388885
I found an answer that worked for me. I am using an iMac.
(1) Sign out of the iTunes store
(2) Open a NEW account with a new Apple ID
(3) Go through the sign up process and then go to the ACCOUNT INFORMATION page
(4) Go to RECOMENDATIONS & PING POSTING
(5) Turn on Genius there
Once the Genius updates, you can sign out and then sign in under your original Apple ID or the e-mail address you use for the iTunes store. All my store credit was there and now Genius worked.
Rather odd but I actually like the Genius at times except when it can't deal with some of my lesser known bands that I listen to.
Worked for me.

How do I perform a "Suite Product Activation" so that Acrobat will start working on my new Retina MacBook Pro?

How do I perform a "Suite Product Activation" so that Acrobat will start working on my new Retina MacBook Pro?
Like others, I have recently upgraded my MacBook Pro to the next generation and migrated all my information from old to new. Everything works seamlessly EXCEPT Acrobat. Photoshop, Indesign, Bridge and Lightroom all seem functional. Acrobat hangs with an error message "Suite Product Activation Needed. Acrobat was installed as part of a suite. To enable Acrobat, please start another element of the suite (such as Photoshop)." Needless to say, starting another element of the suite has NO impact on Acrobat.
This has to be a common problem. Now that Apple has made it really easy to migrate information from old to new machines, it has to come up all the time. What surprises me greatly is that I can't find any coherent answer in these forums.
So how do I get Acrobat running again?

Hi Anubha,
I do not understand what you said below.
I am running Adobe Acrobat Pro Version 9.5.5. I do not remember whether it came with Photoshop or InDesign.
When I open Photoshop, it opens without my having to follow any instructions to activate the software. As a matter of fact, I cannot find my Photoshop serial number anywhere in the Photoshop program itself. I do know it from my profile at Adobe.com. Are you suggesting I deactivate Photoshop on the new computer and then reactivate it using my serial number? Will it reactivate?
When you say
"/Library/Application Support/Adobe" at the root level of the startup disk (not the Library folder inside a user's Home folder)
what do you mean? I do not have a startup disk. I have the original installation disk but that version of Photoshop has been updated a few times.
After staring at your instructions for a while, I realized that you might be talking about the Library/Application Support folders resident on my Macintosh HD, although why you called it a startup disk is unclear to me. IAC, I went into those folders and duly moved the three folders into a new folder I called “Acrob1” and restarted Adobe Acrobat 9 and got the following error message: “AMT Subsystem Failure The licensing subsystem has failed catastrophically. You must reinstall of call customer support.” with a small (6).
By undoing my actions I am back to the staus quo ante.
Now what?
Regards, Robert

New 17" MacBook Pro Brightness always changing

Similar Messages

Maybe you are looking for