New A03 video driver posted for Venue 11 Pro 7130 - please report any remaining issues here!

We have posted the updated A03 version of the video driver.   If you are having video problems on your 713x, please update to this latest driver ASAP.
http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=3DTCD&fileId=3390560770&osCode=WB64A&productCode=dell-venue-11i-pro&languageCode=EN&categoryId=VI
This driver fixes most known issues.   Note that there are still several monitors with known persistence issues (e.g. what the monitor does after a sleep/resume cycle).   The plan is to address these in the next driver release.
If you see issues with the A03 driver, please provide information here.   Please see this thread for general troubleshooting steps before reporting issues -> http://en.community.dell.com/support-forums/mobile-devices/f/4586/t/19580384.aspx?pi239031352=1#20664209
Thanks!

i updated the video drive and was really excited when i hooked up my DP to DP and the monitor worked. Soon after though, a bunch of issues arised:
1) When the monitor went to sleep it shut of the tablet as well.
2) My CPU is now running high (50%-60%) and my cursor has a constant blue circle spinning around
3) The fan is constantly running, not high but on. It did not do this prior to the driver update
The Venue is working in the sense that i am running an HDMI to HDMI monitor off the dock and my application seem to run at the same speed.
Tech support downgraded me back to A02 but the problem still persists. We are now going to reimage.
I am not super technical, but i almost feel like the A03 driver changed a setting or two in the system which is causing the issues.

Similar Messages

New Intel video driver won't install

The new intel video driver won't install on my T410. Anyone else having the same problem? All I get is a Turbo Boost installation box. The intel video driver version doesn't update. I've tried manually installing via "update driver", but windows says that I already have the newest driver (even when i only have 8.15.10.2202).
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74433
Win 7 Pro x64
T410 2516-CTO

It could be a typo.
http://download.lenovo.com/lenovo/content/ddfm/MIGR-74582.html#video
that shows what you have to be the latest.
After looking at it again it is a typo. It shows .2202 until you bring it up, then it shows .2253. I will let the admins know, ty for pointing it out.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

"fire wire" video capture cards for mac pro

....Have Power Mac ver. 10.9.5 system Maverick w/ 4 MB RAM & am trying to locate hardware for:
acquiring "FIRE WIRE" video capture cards for mac pro.... ? Any suggestions....?(Just purchased Adobe CS 5 premium)

Your question doesn't make much sense.
What type of Mac Pro do you have? Is it the new black cylinder or the old style silver tower?
Firewire is built-in to the old models & the new Mac Pros can use Thunderbolt to Firewire converters to capture from Firewire sources.
Maybe like this http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
Many older cameras used Firewire for capturing, but that has been replaced by other connection types. What are you trying to capture from?

Which is the optimal hard drive configuration for Logic Pro ?

hello people
i would like to ask your advices about possible hard drive configurations for Logic Pro
I have a Mac Pro and thinking to buy 4 x 500GB drives .
there are several combinations in my mind to configure , but first of all i would like to ask which is the best for an optimal system for Logic Pro
model 1 :
1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
1 stripe Raid 0 array drive for ''recording + sound banks'' (500 + 500 = 1000)
which means to using 4 hard drives as 2 drives
model 2 :
1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
1 Single drive for Sound banks (500)
1 Single drive for Recording (500)
which means to using 4 hard drives as 3 drives
Or , it is more healthy to use the drives as single , without raid , stripe sets but with its own capacity instead of combining .
and also if someone has an idea regarding to compare of Seagate and Westerndigital drives (which is the best for audio recording) , would be really helpfull
I am kinda rookie for these subjects :/
thanks in advance

heelo blayzay
thanks for the reply and assistance.
1) how can i create a back up set for the 4th HD to be make back up of the 2nd and 3rd HD
2) what about to make 1st HD for system and 2nd3rd4th (1.5TB) for audio recording, and an external drive for backups ?
For the back ups , is there a special process for the backing up HD (internal or external) ? Or should i just need a Clone software to make the back up
thank you again.

Will the1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1?

Will the 1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1? My details of my Mac Pro is as follows:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          2
Total Number Of Cores:          4
L2 Cache (per processor):          4 MB
Memory:          6 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP11.005C.B08
SMC Version (system):          1.7f10
Hardware UUID:          00000000-0000-1000-8000-0017F2059956

It will say "green" and use less power, park its head probably, and while early units had some trouble they have evolved. Variable rpm or slower rpm also. They can be much less expenisve way to add storage.
WD Caviar Green
WD Green 2TB
For the system, 640GB is a nice size. Look for 64MB cache to help insure your drive is the latest models which will also say "6G SATA 3" which is fine.
WD Caviar Black 1TB 6Gb
WD Black Caviar 2TB
larger means higher density platter, I find the 1TB and larger Blacks to run hotter/warmer and companys want drives to be able to run warmer or with less cooling. - but for really cold drives other than SSD I have found all my WD 10K VRs to have the absolute coldest temps.
Just noticed Amazon having better prices than Newegg on 1TB - and WD and Hitachi.
Green for your external backup, for media libraries that are not high volume access, to run cool and less power. Enterprise for system and performance. TimeMachine sometimes makes a poor backup method with some green cases.

Want to build a video editing machine for Premiere Pro CC

I will only be using this machine for Premiere pro CC.I would like you guys to have a look at the specs I have chosen,give your suggestions:
i5 4th gen 4670K 3.4 Ghz LGA 1150 (Keeping in mind the benchmark tests found on this site for CC)
Ram Corsair 16 GB Corsair DDR3 @ 1333Mhz. Either 4GB x 4 or 4GB x 2 + 8GB X 1.I already have 8 GB of ram so I am stuck with 1333Mhz.Will this really matter? is 1600mhz better for video editing ?
Motherboard has to be in MSI as I had bad experiences with Asus and Intel original.I am confused about the chipset though..Has to be Z series right??
HDD - 2TB x 1 @ 7200rpm Seagate
1TB x 1 @ 7200rpm Seagate I already have the HDDs from the last machine.
Graphics Card - Within 12k INR.No choice in particular though I had good experience with Sapphire AMD 6670 AND R7 250. I hear AMD is no good for video editing?is it true?
Prefrences- Saphire for AMD
Zotac for Nvidia
Please recomend me a PSU.What shoud be the wattage? Also, need some guidance for buying a UPS.Have this one as of now:
http://www.snapdeal.com/product/zebronics-power-ups-u111/653520?utm_source=earth_feed&utm_ campaign=21_56&utm_medium=101239537
psst- Do I need a cooling option if I am not running this machine in an air conditioned room?
As for the OS is Microsoft Windows 8 / 8.1 SL OEM 64 bit ok ?
I am also looking to buy a Full HD monitor under 12K INR.
Thanks a lot in advance !!

The new Haswell E CPU is out now. THAT is what you want for a new editing machine. ESPECIALLY for heading into the future, which will involve 4K and other, maybe more DEMANDING codecs. SEE Eric Bowen's posting here on this forum regarding the test results for video editing using the Haswell E...vs. the older CPUs.
The Haswell E now has a new chipset,( X99), that brings MANY new features, AND, the Haswell E NOW features "quad channel" memory...to handle large amounts of data FASTER. The new motherboards have TEN SATA III ports, for a variety of HIGH SPEED storage options !! The OLDER motherboards are LIMITED to TWO SATA III ports.....PREVENTING creating FAST onboard RAID setups. The Haswell E is available with EIGHT,or, SIX cores...you choose !! Use at least 32 GB of system memory. Soon, Eric will post the results of the new Nvidia 970 and 980 video cards. in his video editing test. The 980 is ALREADY the top card in GAMING...BEATING the 780ti, DESPITE having LESS data throughput. The 980 MAY be the card you want....it is MUCH cheaper than the 780ti......down in the $500 plus range.
Use the new Samsung 850 Pro SSDs in your new system...or, the cheaper Crucial M550 series SSDs. The SSDs are now WAY more reliable than HDDs and are WAY FASTER, in many ways.

Maximum Hard Drive Size for Mac Pro OS X 10.6.4

I would like to install a backup drive in my Mac Pro. What is the largest drive I can install?
A 1.0T would work but a 2.0T would be better.
When I bought my Mac Pro in Oct 2008 it stated I could have up to 4.0T of drive space. Does that mean I am limited to 1.0T drives? I have since upgraded to Snow Leopard OS X 10.6.4. Will it recognize 2.0T drives?
The new drive will be used for backup only. Any recommendations?

A quick look for reviews shows the WD 2TB Black Caviar on numerous sites last October. And before that they had RE3 and RE4 and Green variety.
Latest review of all the 1TB drive offerings.
http://techreport.com/articles.x/19330
Newegg offering Western Digital's 2TB Caviar Green hard drive for a juicy $99.99 with free shipping.
http://techreport.com/discussions.x/19373
And Seagate hopes to be the first with 3TB later this year.
They already have one in USB2 case now.
http://techreport.com/discussions.x/19177
Best bet, check AccelerateYourMac web site drive upgrade database, check vendor for drives and their own knowledge base too.
WD: http://www.wdc.com/en/products/productcatalog.asp

Optimal Hard Drive Configuration for Premiere Pro CS5 and Pro Tools

I am in the process of upgrading a workstation that is used primarily for multi-track audio recording in Pro Tools to use the following Adobe CS5 products for production of promotional videos in HDV (and AVCHD for the web) as well as printed marketing materials for bands and musicians: Premiere Pro, Encore, Photoshop, Illustrator and Soundbooth.
Since Premiere Pro is probably the most demanding application of the group, I have been studying the suggested hardware configurations on this forum with great interest, particularly HARM's suggestions (including his Generic Guideline for Disk Setup) to determine which hard drives to purchase and the optimal manner in which to configure them.
I am upgrading an HP Z800 with dual quad core 2.44 GhZ processors with hyperthreading (16 virtual cores), 12 GB of memory and an overclocked GeForce GTX 470. Without setting up a RAID configuration (which I cannot afford at the moment), I would like to use the 4 available HDD bays in the Z800 in the optimal manner for Premier Pro, using currently available drives. I am currently considering purchasing a 300GB VelociRaptor to use as my C drive because of the extended load times and demands placed on the drive by ProTools and the associated Waves plug-ins.
I would appreciate suggestions to improve my following plan: C (300GB WD VelociRaptor) for OS and Programs; D (1 TB WD Black Caviar) for Media and Projects; E (1 250 GB WD Black Caviar) for Pagefile (approx. 18 GB) and Media Cache; and E (2 TB WD Black Caviar) for Previews, Exports and Pro Tools audio files.
I have great respect for the knowledge of the members of this forum and eagerly await your suggestions.
/Bill

I very much appreciate the responses to my email because I know that all of your time is valuable and that you have chosen to use some of that valuable time to help an unknown individual. This forum is remarkable because of the wealth of knowledge available and the willingness of so many to assist others.
I now wish to narrow my questions to save you time and so that I can get specific advice. I may not have not been clear that I have already upgraded to the HP Z800 with dual quad core processors and overclocked GTX 470, primarily for the improved performance it will provide in ProTools. My question now is how to optimize its performance for Premiere Pro CS5. Based upon my research, I am considering the following two upgrades, but I am open to other suggestions if they would provide better results at a similar cost
1. I am considering purchasing a 600GB WD VelociRaptor ( WD6000HLXH) for my C drive on which I would place OS (Windows 7, 64 Bit) and programs in an effort to reduce loading times of large programs. I have two questions: (1) Are members of the forum seeing a significant improvment in program loading times with the VelociRaptor because I am still not convinced that the price performance of SSD's justifies their use; and (2) There are so many models of VelociRaptors now that I want to be certain that I am purchasing the best version for my needs. In addition to the usual 10000 RPM speed, this model has 32MB Cache and a 3.5" form factor as well as a SATA 6.0GB/s interface (which I doubt my motherboard can take advantage of but it might extend the useful life of the drive with future configurations).
2. I currently have available for installation in the Z800 the following drives: (1) WD 2TB Black Caviar; (1) WD 1TB Black Caviar; (2) Hitachi 1TB. I believe that the Z800 can accept up to 5 SATA hard drives which I will have if I purchase the Velociraptor. Although I am reasonably knowledeable when it comes to hardware, I have never set up a RAID configuration. Therefore, it would be helpful if someone could recommend one of the various RAID configurations and brieflyexplain why it would seem to be best for my needs. I can then focus my research on understanding that one configuration.
I was planning to follow Scott's suggestion for my current 3 drives: OS and programs on C (WD 600 GBVelociRaptor), media and projects on D (WD 1TB Black Caviar), export files and Pro Tools files (all live musician tracks, no samples) on E (WD 2TB Black Caviar). However, I have been reading about the benefits of a RAID configuration so I am interested in further suggestions now that I have clarified my questions.
Thank you all for your help.
Bill

BOOT DRIVE ADVICE for MAC PRO. How Big and Partition Size

So new new Mac Pro (Quad) arrives this week.
I'm doing a drive just for BOOT and another drive (or drives) for data.
The big question is, what size drive should I buy for just BOOT/OS/APPLICATIONS and how much of it should I partition. I want to install everything on the boot drive to be on the outside area of the disc and ignore the inside.... So, do I get a 300GB drive and partition 100GB to use as the boot partition and ignore the rest?
Any advise would be helpful!
Thanks!

If you have Final Cut, X-Plane and such, you'll find even 150GB to be small. You want to have plenty of free space for burning DVD-DL, temp space for programs and files, and so that free space never gets too highly fragmented.
A 200GB partition on a 640GB drive seems to be a good choice and it will still maintain 80MB/sec. Still use the rest as an alternate for your data (put it on a sparse disk image).
10K Raptor 300GB (Amazon, $229) is a nice, fast boot drive if you really need it, though most 640GB drives are more than adequate for most people.
If you plan to install Windows, I'd dedicate a drive just for that purpose and not use your boot drive. Not sure if "BOOT" meant just OS/Apps or more.

Best hard drive setup for Logic Pro?..

Hi all,
I'm about to get a Mac Pro, and I was wondering a bit about the best hard drive set up for running Logic Pro.
1. Should I go with Western Digital Caviar SE ? Noise is a primary issue, I'd like them to be as silent as possible. Could anybody tell me their experiences with this disc?.. I also hear that Samsungs Spinpoint are almost silent. Any truth to this? (I want my discs in sizes of 500Gb.)
2. Is this a good setup:
D1: Mac OS, Logic Pro
D2: Audio for Logic Pro
D3: Sample libraries, including direct from disc streaming.
3. I seem to remember from another post that someone wrote that raiding discs could actually decrease performance when working with audio. Is this the case?
Thanks,
Curvebender.
Message was edited by: curvebender
Message was edited by: curvebender

curvebender wrote:
2. Is this a good setup:
D1: Mac OS, Logic Pro
D2: Audio for Logic Pro
D3: Sample libraries, including direct from disc streaming.
Yes, excellent way to go. One suggestion: on your sample or audio drive, or an external FW, install a basic system + Logic app only. This enables you to have another system to boot from in case of trouble, or you can use it as a test bed for future updates etc. without affecting your primary system. You'd only boot into this drive in case of problems or for testing. I currently have Leopard running on one drive to test it out as I don't want to move to 10.5.x yet.

How to obtain Video and Non Video Serial Keys for Premiere Pro CS6

Discovered that certain codec presets (specifically the AVCHD codec) was not available for Premiere Pro CS6 installed under Creative Cloud for Enterprise.
Understand there are two different serial numbers for use in installation. One of these serial numbers is labeled "Video," and one is labeled "Non-Video.
Where are these serial numbers located? How are the serial numbers obtained?

Hello Ann,
Appreciate your reply..
Here is where some additional confusion arises (reference bottom part referring to Video Serial Keys) Adobe support said that these Video Keys are to be purchased from the reseller (which makes no sense)
Error "...a sequence that could not be opened"
So, if I understand from your replies and what I have read - it is of the belief that by de-activating and re-activating will address the issue of the missing codecs. Do you believe this to be correct as well?
Thank you

PCI Video Interface Card for Mac Pro/FCP

Could someone please recommend a PCI Video Interface card for my Mac Pro? I'm looking for something that will capture in Beta SP, as well as support HD-SDI (bnc connector) -- does such a card exist?
Thanks!
Message was edited by: Matinicus Rock

Matrox:
http://www.matrox.com/video/en/products/mac/mxo2_family/
You are flush with options...
Shane

Ti4200, unattended driver install for Win2k Pro?

Running setup with /? does not reveal any switch options. No standard switches work either. I added $OEM$ to the CD root and have several drivers in:
cdroot\$OEM$\$$\pnpdrvrs
The one I want to work the most: video drivers - so I can start with a better screen resolution. Ironically, all drivers work EXCEPT my MSI/nvidia driver. If I put the MSI driver files in the above folder, the setup works, but the driver does not install. If I do not include the nvidia driver files, my unattended install also works fine - minus the video driver of course. If I include the latest driver from:
http://www.nvidia.com/object/winxp_2k_66.93
Win2k Setup freezes when it is detecting hardware and the progress bar shows 100%.
I'm pretty sure I can install it during GUI mode install by adding it to the svcpack folder and to svcpack.inf, but there is no "unattend" mode switch I've found for the setup installer, so I'm hoping to get it to work the $OEM$ way.
I tried the Microsoft Windows 2000 Setup & Deployment Forum but have had no results.
Any ideas why my setup freezes when I add the drivers? Is there any way to install them silently, GUI or CLI?
winnt.sif contents:
;SetupMgrTag
[Data]
AutoPartition=0
MsDosInitiated="0"
UnattendedInstall="Yes"
[Unattended]
UnattendMode=FullUnattended
DriverSigningPolicy=Ignore
OemSkipEula=Yes
TargetPath=\WINNT
OemPnPDriversPath=\winnt\pnpdrvrs
[GuiUnattended]
AdminPassword=*
OEMSkipRegional=1
TimeZone=10
OemSkipWelcome=1
[UserData]
FullName="Brandon Stout"
OrgName=FamilyHomeVCD.com
ComputerName=Home
; ProductID=NOT FOR PUBLIC USE!
[FavoritesEx]
Title1="myname.url"
URL1="testurl.com"
[Branding]
BrandIEUsingUnattended=No
[URL]
Home_Page=http://www.mozilla.org/products/firefox/central.html
Help_Page=http://www.mozilla.org/products/firefox/central.html
Search_Page=http://www.google.com/
;[Display] COMMENTED OUT FOR TROUBLESHOOTING
; BitsPerPel=32
; Xresolution=1600
; YResolution=1200
; Vrefresh=75
[TapiLocation]
CountryCode=1
Dialing=Tone
AreaCode=801
[Identification]
JoinWorkgroup=WORKGROUP
[Networking]
InstallDefaultComponents=Yes

the last time i played with that it was a bit more complicated that you seem to have made it
OemPnPDriversPath="Drivers\005_AudioDrv;Drivers\007_AudioUtl;Drivers\003_Ethernet;Drivers\000_GART;Drivers\004_IDE;Drivers\002_MemCtl;Drivers\001_SMBus;Drivers\006_storage;Drivers\006_storage\adaptec;Drivers\006_storage\adaptec\aac;Drivers\006_storage\adaptec\aar1210;Drivers\006_storage\adaptec\i2o;Drivers\006_storage\adaptec\u160;Drivers\006_storage\adaptec\u320;Drivers\006_storage\adaptec\u320r;Drivers\006_storage\ali;Drivers\006_storage\amd;Drivers\006_storage\highpoint;Drivers\006_storage\highpoint\hpt366;Drivers\006_storage\highpoint\hpt371;Drivers\006_storage\highpoint\hpt374;Drivers\006_storage\highpoint\hpt3xx;Drivers\006_storage\highpoint\rr182x;Drivers\006_storage\intel;Drivers\006_storage\intel\eide;Drivers\006_storage\intel\sataraid;Drivers\006_storage\intel\u320r;Drivers\006_storage\nvidia;Drivers\006_storage\nvidia\eide;Drivers\006_storage\nvidia\raid;Drivers\006_storage\promise;Drivers\006_storage\promise\fasttrak;Drivers\006_storage\promise\fasttx2k;Drivers\006_storage\promise\sx4000;Drivers\006_storage\promise\sx6000;Drivers\006_storage\promise\ulsata;Drivers\006_storage\promise\ultra;Drivers\006_storage\sis;Drivers\006_storage\sis\eide;Drivers\006_storage\sis\raid;Drivers\006_storage\via;Drivers\006_storage\via\eide;Drivers\006_storage\via\ideraid;Drivers\006_storage\via\miniport;Drivers\006_storage\via\sataraid;Drivers\008_Vga"
and i had 9 files inside the Drivers folder $1 folder which in turn was inside $OEM$
\$OEM$\$1\Drivers\000_GART
etc
http://www.msfn.org/board/index.
i found reading there a big help
especially reading that
http://unattended.msfn.org/

Looking for Satellite P100-PSPA3U driver's for XP Pro SP3

Hi,
I've been looking for the driver's for the Toshiba Satellite P100-PSPA3U. I've try to get the driver's from the European website but I could found them.
I really will appreciate if someone could help me with this issue.
The laptop has Windows XP Pro SP3 32-bit English version.
Regards,
Cesar Garnier

Hi Cesar
What is country of purchase? It is P100-xxx?

Why I am buying a new MacBook Pro now, but, first, any major issues?

With the delay of Ivy Bridge, and with my personal view that the next generation of MacBook Pro notebooks will be dropping FireWire 800 to service a better design, I have decided to purchase a new MacBook Pro now.
I just cannot imagine the new notebooks having a FireWire or Ethernet port, as they add too much thickness.
While I keep MacBook Pros for up to 4-years, I think this new purchase will have to be a transition computer, as the next model will probably be too irresitable. Having the option of then moving my data via Thunderbolt to Thunderbolt (Tarket Disk Mode) is very appealing too.
So, any issues with the current line?
Specifically, has anyone had a screen flicker issue or anything else major?
Would anyone dare say Thunderbolt is unreliable?
I really appreciate any thoughts on this - Thank you!

Shootist007 wrote:
What you think Apple is infallible? They aren't. Just look at this and all the other Mac forums on the net.
I am so sorry, but you are dead wrong.
First, people get their problems resolved here quickly. A majority of the issues here are "Newbie" issues.
I have been a Mac user since 2007, and I have been on these forums since that time too. I have never once seen a horror story like the ones found on the Dell, Lenovo, and HP support forums that pop up on an hourly basis.
Read those forums, and you will get tears in your eyes.
Anytime I have called Apple or visited an Apple Store, they have treated me like a God.
Apple hardware is bullet proof made of the best materials on the planet. A MacBook Pro is far stronger and more durable than any ThinkPad, Dell Precision, or HP Elitebook.
Just open up a MacBook Pro to look at the insides as compared to the disaster zones of the aforementioned PCs.
Oh.... and no bloody stickers on MY notebook.
Everything just works.
Little things come up, but they are always solved.
Now, add programs like Joint Venture, and heaven is a place on earth.
No PC company comes close to treating their customers the way Apple has treated me since 07.
Apple has earned my business for life.
Right now, I can schedule a call with Apple - What PC company does that?
Apple = Unequaled products, service, and support. No PC company can come close to any of those three traits.
PS
And none of those PC forums have people like Kappy, Eww, Bee, Niel, iVmichael, sig, Etresoft, (yourself), and all the other fine members of this community that make it such a pleasure...

New A03 video driver posted for Venue 11 Pro 7130 - please report any remaining issues here!

Similar Messages

Maybe you are looking for