New Fonts Not Installing In System

Good Morning All:
I have a disk of fonts that I need to install that are a part of a visual identity package from my University. I am trying to use them in LiveType to no avail. They just come up as .exe instead of the font. The instructions tell me to simply copy them to the library.
Any help would be appreciated

1. Insert the disc that contains the new font, or copy the font to your hard disk from another location.
2. Double-click the icon for the font in the Finder. Font Book opens and displays the font so you can see what the font looks like.
3. Click Install Font.
It should then be available in the list of fonts in Live Type or the text fonts in FCP

Similar Messages

I had a problem in the Hard Laptop MacBook Pro you replace hard I could not install the system

I Abdul Razak from Syria.
Since a short period of OS X system stops working and request a new download system when what do I install the system and I can not show me a message that the disk is locked. I asked one of my friends about the problem and Nsahana that I replace the hard and you do, but I could not install the system or OS X on the new hard?
I wish to help and quickly Thank you.

Zap the PRAM and Reset the SMC, then try again.

Why cant illustrator create outlines of fonts not installed on the computer when opening an eps or p

why cant illustrator create outlines of fonts not installed on the computer when opening an eps or pdf as corel can?

estone,
From PDF (with the font(s) embedded):
In Acrobat, Advanced>Print Production>Flattener Preview, then File>Place into Illy without embedding.

Fonts not installing on new install of AI CS2

Hi; I have reinstalled AICS2 on a new machine and for some reason some of the fonts did not install (Eurostil, for one); after updating via the Adobe Updater, the font still does not appear, even though I have it on the old install. Anyone ever come across this issue?

They may not be fonts Illustrator CS2 installs, as "Eurostil" is not a font Adobe includes with it's programs.
The fonts Illustrator CS2 installs are:
ACaslonPro-Bold.otf
ACaslonPro-BoldItalic.otf
ACaslonPro-Italic.otf
ACaslonPro-Regular.otf
ACaslonPro-Semibold.otf
ACaslonPro-SemiboldItalic.otf
AdobeMingStd-Light.otf
AdobeMyungjoStd-Medium.otf
AGaramondPro-Bold.otf
AGaramondPro-BoldItalic.otf
AGaramondPro-Italic.otf
AGaramondPro-Regular.otf
BernhardModernStd-Bold.otf
BernhardModernStd-BoldIt.otf
BernhardModernStd-Italic.otf
BernhardModernStd-Roman.otf
BirchStd.otf
BrushScriptStd.otf
CenturyOldStyleStd-Bold.otf
CenturyOldStyleStd-Italic.otf
CenturyOldStyleStd-Regular.otf
ChaparralPro-Bold.otf
ChaparralPro-BoldIt.otf
ChaparralPro-Italic.otf
ChaparralPro-Light.otf
ChaparralPro-LightIt.otf
ChaparralPro-Regular.otf
ChaparralPro-Semibold.otf
ChaparralPro-SemiboldIt.otf
CharlemagneStd-Bold.otf
CharlemagneStd-Regular.otf
CourierStd-Bold.otf
CourierStd-BoldOblique.otf
CourierStd-Oblique.otf
CourierStd.otf
GiddyupStd.otf
KozGoPro-Heavy.otf
KozGoPro-Medium.otf
KozGoPro-Bold.otf
KozGoPro-Extralight.otf
KozGoPro-Light.otf
KozGoPro-Regular.otf
KozMinPro-Bold.otf
KozMinPro-Light.otf
KozMinPro-Extralight.otf
KozMinPro-Heavy.otf
KozMinPro-Medium.otf
KozMinPro-Regular.otf
LetterGothicStd-Bold.otf
LetterGothicStd-BoldSlanted.otf
LetterGothicStd-Slanted.otf
LetterGothicStd.otf
LithosPro-Black.otf
LithosPro-Bold.otf
LithosPro-Regular.otf
MesquiteStd.otf
MinionPro-Bold.otf
MinionPro-BoldIt.otf
MinionPro-It.otf
MinionPro-Regular.otf
MinionPro-Semibold.otf
MinionPro-SemiboldIt.otf
MinionStd-Black.otf
MyriadPro-Black.otf
MyriadPro-BlackIt.otf
MyriadPro-Bold.otf
MyriadPro-BoldIt.otf
MyriadPro-It.otf
MyriadPro-Light.otf
MyriadPro-LightIt.otf
MyriadPro-Regular.otf
MyriadPro-Semibold.otf
MyriadPro-SemiboldIt.otf
MyriadStd-Sketch.otf
MyriadStd-Tilt.otf
NewsGothicStd-Bold.otf
NewsGothicStd-BoldOblique.otf
NewsGothicStd-Oblique.otf
NewsGothicStd.otf
NuevaStd-Bold.otf
NuevaStd-BoldItalic.otf
NuevaStd-Italic.otf
NuevaStd-Light.otf
NuevaStd-LightItalic.otf
NuevaStd-Regular.otf
OcraStd.otf
PrestigeEliteStd-Bd.otf
PrestigeEliteStd-BdSlanted.otf
PrestigeEliteStd-Slanted.otf
PrestigeEliteStd.otf
RosewoodStd-Fill.otf
RosewoodStd-Regular.otf
StencilStd.otf
TrajanPro-Bold.otf
TrajanPro-Regular.otf
VivaStd-Bold.otf
VivaStd-Light.otf
VivaStd-Regular.otf
WoodtypeOrnamentsStd.otf

Can't find font already installed in System.

OS: Windows 7
Adobe Acrobat 9 Pro
I'm creating a new form and I can't choose a specific font (already installed on the system) for a text field; the font I need to use is "Gotham-Book" (placed under the Gotham family in the font library in the Windows Fonts folder), when displaying the available fonts in the Appearance tab on the Text Field Properties, the only "Gotham-type" fonts displayed are "Gotham" and "Gotham Italic" as shown below:
Also important, when using the TouchUp Text tool, the dialog box DOES let me choose all the installed fonts on the system, including the "Gotham-Book" font that I need for the text field:
My question is, why does Acrobat can't work with the same font library in all of it's actions?

Here is what I see on mine. Do you not see this? You can't see it while actively editing text.
Pattie

New fonts not working in photoshop...

I have installed new fonts on my mac but they will not work in Photoshop.. can somoene help me? I don't know if I have done something wrong or need to take another step.. I am running CS4 and OS 10.6.4. The message I get when I try to use a font I recently installed is "Could not complete your request because something prevented the text engine from being intitalized." Any help would be greatly appreciated!
Lisa

Most likely you have some corrupt fonts installed.
Try validating the fonts using FontBook to find the most obvious problems.

New font versions installed by Office 2010

Hi Forum,
I know that e.g. the Calibri font is updated with a newer version when installing Office 2010.
What I am missing is a list that tells me which fonts to update on a print server. Running a pure print server includes NOT having Office packs installed. Therefore the fonts will never be updated and I do not like the idea that I cannot upload correct fonts
to the server in good time rather than having to wait until users reports issues printing.
How do others overcome this issue on their print queues? I would assume that rendering on the client would overcome this problem. But then it will give the users extra CPU load and increase the size of the spool jobs from the client to the server.
Thanks,
David

But just getting the list is only part of the solution. How do I prevent this from ever happening. I can never be in control of the font versions installed on the client PCs.
What are others doing?

New font not coming through?

Hi
We use reports 10g and app server/db 10g.
I need to use a new font for our company logo. I have installed this on the server and local PC. I have installed these and then amended a text string on one report to use the new font. It appears correct in reports builder and also correct when i use the run paper layout through reports builder on my local PC the report shows with the new font.
When i run the report from our reports server it changes the font to something else (looks like a standard forn like ariel or something).
Im assuming the reports server does not know this new font but yet i installed it on the server that has the app server installed on. I also gave the app server a reboot just to test this but still no luck.
Any help will be appreciated.

It is pretty weird that it does not work since both the IDS and the AS are in a Windows environment.
IF it is PDF, you can try something, you could configure PDF Font subsetting - this will embed the font in the generated file which would make it completely portable, you would not need to install the fonts in the client PCs.
Try saving and opening the PDF file that is generated with Acrobat Reader, then go into File -> Properties -> Fonts
What do you see ?
Try also generating an XML file from your .rdf, then search for "font face"
Did you find your new Font there ? What's the name ?
face="Arial"
This name "Arial" is the name of the Font as the reports is going to need in the server.
For configuring PDF font subsetting, you can simply copy the .ttf files from the Windows Fonts folder into one folder in the REPORTS_PATH, then you go into the uifont.ali file to configure it.
i.e.
Arial..Italic.Bold.. = "Arialbi.ttf"
Arial...Bold.. = "Arialb.ttf"
Arial..Italic... = "Ariali.ttf"
Arial..... = "Arial.ttf"
Edited by: Rodolfo Ferrari on Jun 12, 2009 11:41 PM

Powermac(s) G5 will not install operating system(s).

I have read many posts, but no posts resolve this issue. With wiped or new hard drives, the operating system install dvd disk fails to install and hangs with a last line panic message repeatably mentioned by others and now me "We are hanging here..."
I have a quad core G5 with a wiped and new hard drive. When using a powermac G5 install of the manufactured time of the machine, the install hangs. The install is 10.4. What was on the hard drive before it was wiped was 10.5. I have tried several different disks all with same result. I have done all the obvious and previously failed thing: pulled the battery, reset PRAM, tried different hard drives, other dvd drives, etc. I read that Apple claims to many that the logic board or processors are bad and to throw out the units.
+*Here is the twist.*+ I have four of these units. Prior to wiping they hard drives, they all were in perfect working order. I have 16 more that have not had the hard drives wiped, and all behave exactly the same way when I try to install the operating system while booting off the DVD install disk. If I launch the install disk from the systems when the systems are happily running, they too fail with exactly the same message. I therefore doubt that hardware is at fault and that they all suddenly have bad logic boards, then good, then bad. Or that they are all breaking at the same time when every single one of them were working fine everyday.
I want to get the ones with the wiped drives up and running again. I don't want to put the systems from the unwiped ones on the wiped ones.
Interesting isn't it? Very I think. How much good hardware has been wasted by this issue?
Any ideas? Please, put on your thinking caps.

Hi SeeHere, and a warm welcome to the forums!
I don't want to put the systems from the unwiped ones on the wiped ones.
I fail to understand why you'd not want to try tat on at least one using FireWire target disk mode...
http://docs.info.apple.com/article.html?artnum=58583
And using carbon copy cloner to make an exact copy of your old HD...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Prior to wiping they hard drives, they all were in perfect working order.
What OS/Mac did you use to do that?
In Disc Utility>blue Info icon, what Format & Partition scheme is reported?

Fonts not installing on FontBook after OS X Yosemite upgrade

After I installed OS X Yosemite, I open FontBook to install new fonts. The font installation windows appears (Validating, Installing, etc.) but then it disappears and none of the fonts installs. Is anybody else experiencing this problem?
I'm on a MacBook Pro (Retina, 13-inch, Late 2013)

I actually looked elsewhere for an answer and found I had to download the Adobe Creative Cloud to successfully download Acrobat Pro.
As a new Adobe user, it is a pretty poor that (a) there is not a full installation guide catering to all user levels and (b) Adobe still seem unaware of the problem judging by the responses to my original post and (c) ACC is another pay monthly option over and above Pro 11.
Forgive me if this is obvious to experienced Adobe users, it is not to me.
James

No Disk-New Hardware Not Installed Successfully .

I have been trying to get my pictures and videos from my new Samnsung Reality for about a month now and add music to it and everytime I plug the USB in ,it tells me I need a disk .Well I did not receive a disk when buying the phone and apparently without this disk ,it will not install to my computer right .
I am going out of town a week from today and would really appreciate it if I had music to listen to on my 8 hour drive .And ,my pictures and videos are piling up in my phone and on my card memory .I have never had this problem before with my last two phones from Verizon and didn't have a disk then either ,I don't understand what the problem is this time .
I also am not finanicially stable to afford any Vcast or Rhapsdy at the moment .

That's cool -- I didn't know that there were phone drivers at that link, too. We've been downloading our drivers from http://www.vzam.net/download/download.aspx
I looked at your link
http://www.vzam.net/vcastmusic/Step2.aspx?manufacturerID=4
and I think the driver you linked to is not for the Reality but instead for a different model the Rogue u960. Unfortunately I don't see the Reality listed among the Samsung models at http://www.vzam.net/vcastmusic/Step2.aspx?manufacturerID=4
We have the u370 which is basically a re-release of the Reality. There's a link for a driver for the Reality u820 / u370 here: http://www.vzam.net/download/download.aspx
When you run the file, it will first install the driver:
"Installing Samsung Mobile USB Driver, this may take a few moments ..."
Then it will try to install a second component which has *not* been necessary for our needs called VZAccess Manager
"Welcome to the InstallShield Wizard for VZAccess Manager"
Just click cancel to cancel the installation of VZAccess Manager.
Upon the driver being installed, we haven't had any problems transferring files back and forth between the phone and the computer.
I want to forewarn you about playing music on the Reality / u370. They have a bug which has never been addressed by Verizon or Samsung. There's no problem playing music through the speakerphone or through bluetooth headphones. But many many people including myself have reported that when you plug in either headphones or a headset to listen to the music that the phone will eventually freeze and/or suddenly be unable to be aware that there's a memory card inserted into the phone. If that occurs, you have to turn off the phone then turn it back on. There are some lucky people out there who have not encountered this bug while headphones or a headset are plugged in.

Changing Fonts to a new font not defined in OBIEE

We are doing a rebranding of our company and we would like to use a new font for all of our reporting. This font is not one that is currently listed in OBIEE. I have the .otf files, I am hoping these read the same as .ttf files, but I don't know where to place them nor can I find where to define them so the Dashboard, Answers and the pdf write picks them up.
Thats for any help,
Jay

Hi,
I'm afraid this will be very hard to implement. In fact, it hasn't much to do with OBIEE, but with your browser. The problem is that GillSans is not a standard font in a browser. So even when you edit all your css files and set GillSans as the default font, it won't be used because GillSans isn't implemented as a font in your browser.
Read here more information about "browser-safe fonts":
http://www.ampsoft.net/webdesign-l/WindowsMacFonts.html
Regards,
Stijn

New fonts not working in Mavericks

I installed new fonts (TTF and ODF). They show up in FontBook under 'computer', but none of my applications (photoshop and word) can find them. I can verify that these exact font files worked fine under Mountain Lion.
I've installed them and restarted a few times but they aren't working. They are enabled and when I verify them in fontbook I get a green tick. This is driving me nuts, any ideas?

Most likely you have some corrupt fonts installed.
Try validating the fonts using FontBook to find the most obvious problems.

Print listing for fonts NOT installed?

Is there an app that will let me print simple font samples for those not installed? I have a large library of fonts and I'd prefer not to install - that would be pretty time consuming. TIA.
BTW - I do have FAP but it only lets me print installed fonts.

You might want to search at www.versiontracker.com. I did a quick search using "print font" and found a few apps that look like they might work for what you want. Among them was http://www.versiontracker.com/dyn/moreinfo/macosx/18451

New fonts not appearing in Pages

I downloaded and copied some true type fonts into the /Library/Fonts folder, however these fonts aren't showing up in Pages (and Keynote, too). Adding them to ~/Library/Fonts didn't work. Just in case, I repaired disk permissions, but they still aren't appearing. The fonts are showing up in the list of fonts in Word, however. Does anyone have any insights on this issue? I'm using Pages 1.0.2. Thanks.

I was going to reply earlier, but I didn't have a chance to play with my computer to figure things out.
I still haven't had time to do so, so forgive me if this is incorrect.
Fontbook is a program which Tiger and (I believe) Panther have for handling fonts. By dragging fonts into the folders manually they may not actually be 'activated' in the system still.
Open Fontbook from your applications folder and see if the fonts show up there. As an aside, double clicking the font in the finder should also give you a small thumbnail of what it looks like and the option to install it. If you don't see anything in the thumbnail, it is rather pointless to install it.
(I will agree with everyone who states that Fontbook is quirky, I know it is. I still haven't found an easier way to install fonts than just doubleclicking on the font file. So much easier than browsing to several obscure folders.)
Gerry

New Fonts Not Installing In System

Similar Messages

Maybe you are looking for