New Format for creating Attribute Sets.

Hi,
In SAP CRM webclient ui 7.0 there is a new format for creating Attribute Sets. The format is 'value table'.
On selecting Format=Value Table the field 'Table' comes up.
There is a message: Here you can enter a table that contains all the values you want to use. This is particularly useful for attributes with a lot of values or if you want to enter multiple attributes with the same values. The table must be a check table with a search help.
Do I need to create a table with all the fields in in marketing attribute assignment block with search help on attributes field.
Can you please guide as to how I should go about this issue.
Regards,
John.

Hi John,
The Attribute Set of Format type 'Value Table' is for the Mutiple Attribute Sets. These can be either a Single Attribute Set with Multiple values or the Multiple Attribute Sets with One value.
You can include all such marketing attributes into one table which is a check table with search help. and use this as the Value Table.
Hope this helps you out!
Regards
Veena.

Similar Messages

Creating Attribute Sets

Hi:
On OA Framework Developers Guide Chapter 3 there is a sectioin of
" Creating Attribute Sets"
I followed the example and try to execute the command on the tiltle
"Generating Attribute Sets Automatically (Only on Linux)" which I tried the following
/jdevbin/<SelectedJDevBuild>/build attributesets APPS APPS ................
but I could not find the /build command that will help the execution on the command line
Does any one tried?
I am trying to create attributesets for XMLType table.
Please help
Ali_2

Hi John,
The Attribute Set of Format type 'Value Table' is for the Mutiple Attribute Sets. These can be either a Single Attribute Set with Multiple values or the Multiple Attribute Sets with One value.
You can include all such marketing attributes into one table which is a check table with search help. and use this as the Value Table.
Hope this helps you out!
Regards
Veena.

Invalid date format for 'Created' field in the getVersions web service Response.

Hi all,
I am trying to get all versions for selected document by calling getVersions method Versions.asmxweb service, but getting ‘Created’ date attribute value is in the format "29-05-2012 12:01"
but I am expecting either one of the following date formats.
1.      yyyy-MM-dd HH:mm:ss or yyyy-MM-ddTHH:mm:ssz
2.      MM/dd/yyyy HH:mm a   (a means AM/PM)
3.      MM/dd/yyyy
4.      yyyyMMdd HH:mm:ss
where do I need to change?
what are all the formate will be support by SharePoint?
please find attached response xml of getVersions call.
<results xmlns="http://schemas.microsoft.com/sharepoint/soap/">
    <list id="{6A6F6CD1-2E9C-44CC-B1F5-56G7JB5C8778}"/>
    <versioning enabled="1"/>
    <settings url="http://hbngjfgj47s20/reg/_layouts/LstSetng.aspx?List={7S6F6CD1-2E9C-44CC-B1F5-KO9J8Y7Y6H78}"/>
    <result version="@0.3" url="http://vmesxsrv47s20/register/Shared Documents/Parent/child/my_doc" created="29-05-2012 12:01" createdRaw="2014-12-02T12:46:02Z" createdBy="my_dom\agi_sharepoint"
createdByName="AGI_Sharepoint" size="288" comments=""/>
    <result version="0.1" url="http://hbngjfgj47s20/register/_vti_history/1/Shared Documents/Parent/child/my_doc" created="29-05-2012 10:01" createdRaw="2014-12-02T10:55:18Z" createdBy="my_dom\my_sharepoint"
createdByName="my_sharepoint" size="288" comments=""/>
    <result version="0.2" url="http://hbngjfgj47s20/register/_vti_history/2/Shared Documents/Parent/child/my_doc.txt" created="29-05-2012 11:01" createdRaw="2014-12-02T10:59:25Z" createdBy="my_dom\my_sharepoint"
createdByName="my_sharepoint" size="288" comments=""/>
</results>
Kindly help me on this.

Hi,
According to your post, my understanding is that you want to change date format for ‘Created’ field in the getVersions web service.
Per my knowledge, you can get the date format for ‘Created’ field as “MM/dd/yyyy HH:mm a”.
For more information, you can refer to:
Versions.GetVersions Method (Versions)
Best Regards,
Linda Li
Linda Li
TechNet Community Support

I received a new IMac for Christmas and set up a new .me account and I'm using this on my IMac and IPhone4S. how do I transfer my music from my old Windows iTunes account to my new Mac account?

I received a new IMac for Christmas and set up a new .me account and I'm using this on my IMac and IPhone4S. how do I transfer my music from my old Windows iTunes account to my new Mac account?

You can red this article about transfering your tunes - http://www.myfirstmac.com/index.php/mac/articles/how-do-i-move-my-itunes-library -from-pc-to-mac-and-keep-my-settings-intact
MJ

How to create attribute & set types with customer namespace COMM_ATTRSET?

Hi CRM Gurus,
I want to create some attributes and set types on CRM system with
`/FITGL/` namespace but system is not allowed to create objects
according. After debugging derives that SAP standart coding given below
on LCOM_ATTRIBUTE_NEWF19 include.
IF ( lv_systemname <> gc_sap_system ) AND
( iv_object_name(1) <> 'Y' AND iv_object_name(1) <> 'Z' ).
Should we make an enhancement on this include? Is there any side
efffects of this enhancement creating attribute & set types on CRM
system during the packaging in terms of related with other attribute & set types objects?
Kind Regards,
Fahrettin

Hi CRM Gurus,
I want to create some attributes and set types on CRM system with
`/FITGL/` namespace but system is not allowed to create objects
according. After debugging derives that SAP standart coding given below
on LCOM_ATTRIBUTE_NEWF19 include.
IF ( lv_systemname <> gc_sap_system ) AND
( iv_object_name(1) <> 'Y' AND iv_object_name(1) <> 'Z' ).
Should we make an enhancement on this include? Is there any side
efffects of this enhancement creating attribute & set types on CRM
system during the packaging in terms of related with other attribute & set types objects?
Kind Regards,
Fahrettin

What is the Procedure for Creating BC sets In PI

hi
what is the Procedure for Creating BC sets In PI
Thanks

Hi Venkata,
Read this SAP official document on creating BC Sets:
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/6f/3c3f91fbef11d2958c00a0c930dcc1/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/6f/3c3f91fbef11d2958c00a0c930dcc1/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/6f/3c3f88fbef11d2958c00a0c930dcc1/frameset.htm">Create Business Configuration Sets</a>
Regards,
Subhasha Ranjan

Set new value for VO attribut

I have function in package on database which is param is String and return value is also String(VARCHAR2).
That function calculate some field on db and return a result.That is OK
I made VO in my AM.
"SELECT package_name.func_name("string") from dual" and that is OK also.
When I start that module I recive valid result from database based on string which I passed to function.
And that works fine.
Question :
How can I change value or how can I set new value for the package_name.func_name(variable) in VO
during runtime in my application ? ^^^^^^^^
JDeveloper 9.0.3.988

I have function in package on database which is param is String and return value is also String(VARCHAR2).
That function calculate some field on db and return a result.That is OK
I made VO in my AM.
"SELECT package_name.func_name("string") from dual" and that is OK also.
When I start that module I recive valid result from database based on string which I passed to function.
And that works fine.
Question :
How can I change value or how can I set new value for the package_name.func_name(variable) in VO
during runtime in my application ? ^^^^^^^^
JDeveloper 9.0.3.988 1. When using stored procedures it would be better to use it in following way:
Connection conn = //get it some how
CallableStatement cs = conn.prepareCall("{call myPackage.do_something(?)}");
cs.registerOutParameter(1, java.sql.Types.VARCHAR);
cs.execute();
2. You could parameterize it like this:
CallableStatement cs = conn.prepareCall("{call " + packageName "." + funcName + "(?)}");
cs.registerOutParameter(1, java.sql.Types.VARCHAR);
cs.setString(1,"someString");
cs.execute();
String result = cs.getString(1);
where packageName and funcName are defined elsewhere
--hery

Invalid format for Marketing Attributes

Hi colleagues,
I have marketing attributes of type NUM 5,2 which are causing erros of type Invalid Format.
I would like to know where do I change this configuration (path in SPRO/Cutomizing Implementation Guide) in CRM.
And If someone knows what type generally is used... it seems strange that standard validation is not accepting this...
thanks,

Can you please let me know what is this 5,2? Is this a value for the attribute?
In the Attributes table, you can only mention the decimal place and in the value table you have to maintain the exact number of decimal places as you mentioned in the attributes.
e.g.
if you create an attribute say "Frequency of Purchases", Format - Numeric Format, Decimal Places - 2, In that case, you have to maintain a values like 35,02 or 34,00 or 37,59 etc.
If you want to change the decimal separator say "," to ".", you can do it in CRM system, as follows
-login to CRM system using sapgui command
-login with your credentials
-go to system->user profile-> own data or you can directly use the transaction SU3
-go to tab "Default" -> change the field "Decimal Notation" as per your liking.
For this you must have an authorization to change your data or ask your administrator to change the same.
Hope this helps.
Edited by: Harsh Singal on Apr 5, 2011 12:47 PM

New operation for reference operation set

Hi,
I want to create a new operation for an existing reference operation set. Is a function for that use available?
It would be optimal if there is a function that copy one operation and insert it the same reference operation set as an new operation.
Can anybody help me? That would be great.
Thanks
sylvie

Hi Naik
This is a big question.
You need tod quite a bit of QM reading.
Go through the Best business practices base line packages.
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
Best regards
Ramki

Group policy preference for creating printers setting the wrong printer as default

Hi
We have a a group policy preference applied to users. At the moment we create a shared printer and set it as default for all users in a specific OU. Now we need to add another shared printer. I have updated the policy and set it to create
the new shared printer and have set item level targeting to the same OU as the first printer. I want to keep the existing printer as the default, however when the policy runs, the new printer is created fine but it is set as the default
printer. Is this because it has been added last ? There doesn't seem to be a way of changing the order that the printers are applied.
Both printers are Shared printers and are set to Create
The existing printer (printer A) is set as the default printer. It is targeted at the London OU.
The new printer (printer B) has NOT been set as default. It is targeted at the London OU.
No other options have been set.
When the policy is applied both printers are added but printer B is being set as the default.
Any help would be appreciated.
Thanks
G

Hi G,
>>however when the policy runs, the new printer is created fine but it is set as the default printer. Is this because it has been added last ? There doesn't seem to be a way of changing the order that the printers are applied.
Before going further, what's the operating systems of our clients? Here, I need to double confirm that the checkbox of
Set this printer as the default printer... is not selected in the new GPP Printer item. Besides, we can change the orders of the printer items. To do this, select the printer item, right click, click All Tasks, and choose Move Up or Move
Down to change the order.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

New format for USB devices.

I am facing an issue with new USB drives. There is a new standard for windows 8 when usb device in detected as an hard drive and not external driver. Thus SCCM is not able to create a boot media.
I have not done much research on it. I want to see if someone had same issues and got it to work?
Thanks for the help.

Hi,
This is a known issue, best advice, by a cheap USB memory which doesn't present itself as an Hard Drive. There is no good workaround.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

NEW FORMAT FOR DISCUSSIONS

does anyone else wish that apple would stop reinventing the wheel and leave a good thing alone?
i used to solve every problem thru the great posts on this site. now i cant find anything.
this new format is the most user unfriendly i have ever experienced. if i have to scroll through one more interminable lists of iphone or itunes topic i am going to scream.
i feel like it's catering to kids now. going to start using macforum or other sites until applegets it together...anyone have this experience? maybe they'll listen to a bunch of us.

amy
Why not narrow the search?
Click on the 'More Options links and you can refine the search to a specific forum, specific, specific poster even.
Regards
TD

What is the accepted format for creating animated emoticons for the iPhone and iPad? Are they .gif files?

I'm new to creating apps for iOS and am interested in creating an app that uses animated emoticons in messaging. I wasn't sure what format was accepted, however. I presumed that .gif files would work but want to know for sure before we begin working on them. Thanks!

So...how does one make animated emoticons for iOS? That's my question, I suppose. Thanks!

Path and Name field in SPD 2010 Workflow for creating Doc Sets

Hi Guys,
Here's hoping you can help out and give a few pointers. I'm currently trying to implement what I thought was quite a simple workflow involving the creation of a Content Type (similar to Doc Set but with additional field) within an alternative library when
a new item is added to the current library.
Create Item in CaseFileLibrary (Output to Variable: CaseFile)
When running the workflow, I keep getting the following error:
"The workflow could not create the list item because the file name is either missing or invalid. "
It seems to be related to the 'File and Path' field within the 'Create New List Item' field mappings. For this I have tried the CurrentItem:Title as some other forums suggest and have also tried entering the URL path e.g. /subsite_name/library_name/CurrentItem:Title.
(as the name of the CaseFile (Doc Set) is going to be the same as the current item name)
If anyone has any suggestions, I would be truely greatful.
Luke

Hi Luke,
This error indicates there is an error in the workflow logic. Ensure that the file name entered in the Path and Name field is a valid file name. Common reasons for a file name to be invalid include a missing or incorrect file extension or a file/path string
that is too long and exceeds the allowable number of characters.
More information, please refer to :
Common error messages in SharePoint workflow development
For the URL that you used in the ‘Create New List Item’, whether the CurrentItem:Title is a lookup, not typed by yourself. If not, please type /subsite_name/library_name/, then lookup CurrentItem:Title, like the below, then save and publish the workflow,
compare the result.
In addition, please use another name for the name, compare the result.
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Date Format for Spry data set sort

Hi
Just feeling my way through the use of Spry Datasets for the
first time and have a couple of issues hopefully someone with more
knowledge of it than me know the answer to.
I had an issue with my Spry Dataset initially that it would
not work in ie7 but was OK in FF3.
After some mucking round I realised the error I was getting -
albeit obscure in IE was telling me it was a date format issue in
my data set.
The db data I am playing with here is fairly simple: I have a
couple of text fields, an integer field that contains the
unixtimestamp of the entry (its a simple diary application) and a
formal date field that holds the same date in mysql's date format.
When I display the date in the dataset I do so in the format
"23rd May 2009" (as an example)- I code this using phps date
function in my xml query.
I had set this field to date format in the Spry dataset
conditions but IE seems to barf on this- I can change it to
textstring but then my sort is done on Alpha/Numeric sort of the
first character in the date field which is rubbish.
I only display the date in this format and one of the other
text fields in my dataset- the unixdate is for programmatic
purposes not general display so I cannot sort on this field if its
invisible. How can I acheive a date based sort with this set up- or
what date formats does Spry code prefer for date sorts? (My client
wants the date to show as I have explained). Many thanks. I have a
second query which I will post separately!
Kenny

"Tanushiheadbash" <[email protected]> wrote
in message
news:gqa70o$iat$[email protected]..
> I think I follow what you are saying and in fact I think
its what I
> already
> have. I have set the sort order to use the unixtime when
the page
> initially
> loads and thats OK.
I am sorry, but you aren't following my explanation. English
isn't my mother
tongue, and I am not able to explain it any better.
> However what I need to be able to do is to have the
AJAX/Javascript sort
> (done in this case with Spry- ) to sort on the date when
the column header
> is
> clicked. The problem I have is the date format in this
visible column is
> in
> DDth Month YYYY format and Spry does not recocnise this
as a date format-
> it
> wants it as a string ( or ie gives an error). Maybe its
not possible what
> I am
> trying to do- just thought there might be a clever way
to implement this.
You can take a look at this page:
http://visual.unipv.it/tmt_calendar/admin/reports/events.cfm
Even if all the dates here are incidentally using the
yyyy-mm-dd format, the
dataset display the date from the "start_date_formatted"
field:
<td><a href="javascript:"
onclick="showUpdate('{event_id}')">{start_date_formatted}</a></td>
But uses another field to sort the table:
<th scope="col" spry:sort="start_date">Start
date</th>
You can have the same date, using two different formats,
inside two,
separated dataset fields. One is used for display, the other
one is used for
sort.
You may try to read again my previous explanations, look at
the code in the
page above and see if you get the idea.
Massimo Foti, web-programmer for hire
Tools for ColdFusion, JavaScript and Dreamweaver:
http://www.massimocorner.com

New Format for creating Attribute Sets.

Similar Messages

Maybe you are looking for