New forum features, again

Hi all,
And once again, there are new features and updates for you rolling out within the next day or so.
1. The avatar issue that some of us were having last week has been resolved, so avatars should be working for you. As I mentioned in the previous thread, I would give it 24 hours for your avatar to be approved, but it will most likely be faster than that.
2. You may have already noticed some UI changes related to our new communities coming on board, and there will be a handful more. All communities share a common set of public pages such as communications and dashboard, so you'll start to see a message on those pages indicating that they are public. There will also be a similar message popping up on the OTN home page in the next week or so. This is a temporary workaround to a larger issue that will eventually be fixed in Jive 7. In the meantime, we tried to make the messages as unobtrusive as possible.
3. Direct messaging, as we've mentioned before, is being enabled. This will only work for you if you are mutually following someone. We have a thread on Pros and cons of personal messaging. if you'd like to weigh in on the philosophical aspects of this feature.
4. Finally, I am still working on fixes to the editor, monitoring the email notification issue, and gathering information about the create document feature. I'll keep you posted.
I've locked the previous thread, so you can report glitches with any and all of the new features here.
Thanks!
Monique

moniquevdb-oracle wrote:
2. You may have already noticed some UI changes related to our new communities coming on board, and there will be a handful more. All communities share a common set of public pages such as communications and dashboard, so you'll start to see a message on those pages indicating that they are public. There will also be a similar message popping up on the OTN home page in the next week or so. This is a temporary workaround to a larger issue that will eventually be fixed in Jive 7. In the meantime, we tried to make the messages as unobtrusive as possible.
If I go to my Communications tab it shows the message "This is a shared public page. To go to your community, use "Go Directly To.""
I'm a little confused how my own communications are a 'public' page?
I know you're trying to help those who are 'internal' to recognise when they're possibly going to post something in public, but not sure if having this on a persons own communications is valid.

Similar Messages

OT: New Forum Feature

Has anyone noticed the new breadcrumb links at the bottom of the topic pages?
-Jeff

Oh, the "flags." How I miss my flags. I want my flags - I want my flags!
The "New" bug/banner was also nice and is missed. "Last Post" is good, but obviously only shows the "last post." There could well be a dozen, since the previous visit. Those little bugs were great too.
While I miss both of those in most of the Adobe fora, I REALLY miss them in the Encore Forum/sub-fora.
Dang, I feel like a whinner, and DO like some aspects of the new forum layout. I also realize that it is a work in progress. I can even take having to log-in about half the time, and will tolerate being kicked off, even if I posted 40 sec. before. That this new scheme does try and save much of the post, that did not go through, is a positive. Do not know what its timing is, but I've actually gotten back ~ 50% on some posts.
Hunt

AWESOME new forum feature!

Check this out!
They have just added the ability to not only post your question but to also reply after someone has taken the time to try and help you out...so cool!
They've even added a new feature that allows you to mark posts as 'helpful' or 'solved'.
Man, this is so great...look into it people.
(and yes, I do feel better now thank you)

i feel kind of strange beating this originally funny, now just "tweet tweet, who let the buzz-kill in" post ... chowever,
good to know the 2 yellow, 1 green rule
now, i tried to go back & give a 2nd helpful person a yellowhelpful, but i couldn't figure out how;
also, i couldn't figure out how to "call it" and mark the forum as solved
i guess, you've got to enter those stars on the reply to the helpful/solved post -- if not, you forego the right/opportunity to mark them with stars
it is absolutely ridiculous that i care this much about this --
at the same time,
i care to make music
i am using logic to make music
this forum is invaluable to flowing with logic
& so, i should know how to flow with this forum
off off topic:
the real question:
why do i care to make music
it does not seem to care for me
Dual 2.3 Mac OS X (10.4.5)

New forum feature: A button or option to jump to the first unread message in a thread.

It would be handy if we had a way to open a thread and jump to the first unread message in the thread. This is especially usual when reading very active threads and it would save us some time getting back to the point in the discussion where we left off.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

altenbach wrote:
Another variation of this would also be useful: ....
Actually, we already have that, but I tend to forget. We simply need to click on the nonzero number all the way on the left.
LabVIEW Champion . Do more with less code and in less time .

I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?

I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?
In the previous versions of Firefox when you went to you Bookmarks menu it gave you the options to either Bookmark This Page 'command' + 'D', Subscribe to this Page, Bookmark All Tabs 'up-arrow-key' + 'command' + 'D', and Organize Bookmarks 'up-arrow-key' + 'command' + 'B' however in the newest version of Firefox there is no Bookmark All Tabs so you can bookmark all the tabs that you have up in one window at a time. So I need to know if it is possible that the feature is now in a different place, is gone altogether, or if you can get that feature another way?
For me personally and my work I go through hundreds of web pages a day and save around half of those so it is imperative that I be able to bookmark more then one tab at a time because I can't be bothered to bookmark every single page separately and then go through hundreds of tabs in my Unsorted bookmarks in order to sort those bookmarks. It is simple inconvenient to sort every bookmark individually that is why the previous version of Firefox with the Bookmark All Tabs button was superior in its convenience.

Right click any tab and choose "Bookmark All Tabs".

I am using Firefox 3.6 on my PC , and now, when I select File New Tab (Ctrl+T), no new Tab shows up. Nor does it show up when I click the new Tab symbol next to my other tabs. How can I get the New Tab feature to work again?

In the past 48 hrs, all of a sudden, the New Tab feature on my PC< using Firefox 3.56, simply stopped working. I did not change settings, or download a new version of Firefox. it just stopped working. There are other scenarios where it does still work (for example, if I want to open a link on a web page, I can right click and open the link in a new tab), but if I simply want to have multiple websites open at once on my PC, I am forced to have multiple versions of Firefox open, as my New Tab option seems to be disabled or something. Can you help?

Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

New Forum FAQ

This is a work in progress and will be re-formatted soon into individual Question/Answers in an FAQ subforum.
Can I over write the forums style sheets to change the layout?
Yes, Please see this discussion of scripts that can help you change your view of the Forums: http://forums.adobe.com/thread/294008?tstart=30
How can I see the interface in Japanese, French, German, Spanish, or Simplified Chinese?
In order to see pages in these languages, you can click the Region links at the top of page (where it lists a country name and says “Change”), choose your region and language from the pop-up menu. Click on "Remember this choice" under the menu.
Why do some older messages appear with parentheses around user names?
For a three-month period before our new forums were launched, we encouraged users to go through an account migration process to associate their former User to User forum IDs with their Adobe ID. Accounts with the parentheses are from those users who had content in the old Adobe User to User Forums, but who have not yet signed into the new system. The parentheses were added to these account names so they could be imported into the new system without clashing with screen names associated with Adobe IDs.
Once a user logs in with that account in the new system the parentheses will go away.
How do I participate in the Adobe Online Forums via email?
Visit the forum you wish to participate in and click on the link to "Receive email notifications". You will start receiving new messages posted in that forum. You can reply to the messages directly from your email or you can click on a link in the message to come back to the forum.
Can I start a new discussion topic via email?
Yes. Once you have subscribed to a forum you can click on the “Your Stuff” link in the forums, click on “Mailing Lists” and find a "Create Discussion" email link for each forum you are subscribed to. Copy the full email address (it may wrap onto two lines) into your email client's address book and send new discussions to this address.
Can I include a file attachment via email?
You can include a file attachment in an email that starts a new forum discussion, but you cannot attach a file to an email reply to an existing discussion.
How do I stop receiving email notifications from the Adobe Forums?
To discontinue receiving thread subscription updates, you can change your personal settings in the web-based forums. To do this, login to the Adobe Forums by visiting http://forums.adobe.com/ and click on "Login".
Once you've logged in with your Adobe ID and password, click the menu item labeled "Your Stuff" and select "Profile". Select the "Email Notifications" tab, check the threads for which you would no longer like to receive subscription updates and click "Remove Selected Notifications."
How do I prevent myself from being automatically subscribed to threads I post messages in?
Go to the Your Stuff link in the User Bar, click on Preferences, and uncheck the to radio buttons for subscribing to threads you create and threads you reply to.
How do I embed an image or a video in a forum message?
When posting a message in the Forums there are two buttons in the Rich Text Editor to include a video or an image file in the message.
For video, click on the clapboard button/icon then select the video site and enter the Video URL or embed code and click Insert.
For an image, click on the camera button/icon then select the appropriate tab (From Your Computer, Uploaded Images, or From the web) and follow the onscreen instructions.
What if I want to link to an image on an external site, such as Pixentral or Flickr, instead of uploading the image to the Forum server?
Flickr's Terms of Service state that if you post an image hosted on Flickr on another site you have to link back to the image page on Flickr. To do that you need to go to your image on Flickr, click on the All Sizes link above the image, select the size image you want, then Copy the HTML code from the first box of code underneath the image. Then, in the Forum's Rich Text Editor, click on the >> button/icon and select Insert Raw HTML. This will open a frame within your message where you paste the HTML code you copied from the Flickr site. Then continue on with composing your forum message and click “Post Message” to post the message to the forum system.
For Pixentral images, you will need to go to http://www.pixentral.com and upload your image following the instructions there. You do NOT have to check the box to make images public. Once your image is uploaded there copy the HTML code from the box below your image. Then, in the Forum's Rich Text Editor, click on the >> button/icon and select Insert Raw HTML. This wil open a frame within your message where you paste the HTML code you copied from the Pixentral site. Please note that there is an extra "/" character in the Pixentral URL that will prevent the image from showing up, so you need to make one change to the HTML that you copied from the Pixentral site. The beginning of the HTML code will look something like this:
<a href="http:www.pixentral.com/show.php?picture=16xx5748rt9fhd"/>
Please remove the forward slash that appears between the quotes and the greater than symbol so that this part of the HTML code looks like this:
<a href="http:www.pixentral.com/show.php?picture=16xx5748rt9fhd">
Then continue on with composing your forum message and click “Post Message” to post the message to the forum system.
Can I attach a file to a forum message?
Yes. Each message in the Forums can have up to three files attached. Each file cannot exceed 5MB. These numbers are subject to change.
To attach a file, create a new forum message as usual and then click on the “Browse” button below the Rich Text Editor box to select a file from your computer.
Are forum messages presented in Threaded or Flat order?
The Forum messages can be presented in either Threaded or Flat order. This can be set in your forum Preferences. Click on the “Your Stuff” link and select “Preferences”. The first setting on that page is for how you want to see the messages.
In Flat mode, each message posted in the Forum will appear directly below and in line with the message posted before it. You will be able to view the discussion as if it were a live discussion with each person taking a turn in successive order.
In Threaded mode, each message will be posted below the message it is direct reply to and will be indented. This makes it easier to follow sidebar or sub-discussions, but can make it more difficult to follow a long conversation.
When you are reading messages in a forum, you can select to reply to the original message or to any of the replies to that original message.
How do I edit a message that I have posted in the Forum?
After you have posted a message you will find an “Edit” link at the bottom of the message. Click on the link to open the message editor and make your changes. The edit feature is good for fixing a typo or a link. But if you have extensive changes to make to your message we suggest that you post a new reply to your message instead of editing the original message. Editing is not available if someone has replied to your message. At that point, you have to add a new reply to the thread with the updated information.
How do I delete a message that I have posted in the Forum?
You can delete a message you have posted if there have been no replies. Once someone has replied the Delete option goes away.
How do I send a forum message to a friend?
While reading a message in the Forums, you can send a link to the discussion to someone outside the forum system by clicking on the "Send as email" link in the Actions panel. You can select user names from the system or email addresses of people outside the system and they will be sent a link to the forum. The actual message is not included in the email. The recipient will need to click on the link in the message to view the contents.
How do I report an abusive post in the Forums?
When viewing messages in the Forum you will find a "Report Abuse" link in the Actions panel on the right side for the original message and you will also find an individual “Report Abuse” link listed for each reply to the original message. Click on the link to send a report.
How do I upload an Avatar for my Forum account?
To upload a custom avatar for use in the Adobe Forums you must first create a 128x128 (max size) image file.
Then log into the Forums and click on “Your Stuff” and select “Profile”
Click on “Change avatar” in the Actions panel on the right side of the screen.
Scroll down to the “Upload Avatar” section and click “Browse” to find the avatar file on your system, then click “Upload”.
Once you avatar file is uploaded, it has to be approved by an administrator (this might take several hours to several days). Until it is approved it will be marked as "pending." Once the pending notification is gone, you can select that avatar and click “Save Settings”.
How do I upload an image for my profile page?
Log into the Forums and click on “Your Stuff” and select “Profile”.
Click on the “Edit Profile” link in the Actions panel on the right side of the screen.
Click on the “Browse” button to select an image file from your system.
Click on the “Save” button to upload and save your new profile image
All profile images will be scaled to be 320 pixels wide.
How do I access Private Messages?
The Private Message feature is located under the “Your Stuff” link.
If you have a private message waiting for you in the forum the “Your Stuff” link will be orange.
Click on the “Your Stuff” and select “Private Messages” from the drop down menu.
From there, you will be able to read incoming messages, create new messages, and manage old messages.
You can also manage an Address Book and sort messages into folders.
Can I attach a file to a Private Message?
No. But you can include a link to an image or a video.
How many Private Messages can I have?
40 (subject to change)
Can I subscribe to a feed from the Forums?
Yes, you can get an RSS feed from various parts of the forums: Announcements, Discussions, and you can even subscribe to an individual user by going to their profile (click on their name or avatar any place in the forums) and getting the feed link from there. You can also get a feed of your private message inbox.
Some messages have odd linebreaks and random characters in them, such as lines that start with B or I that don't seem to make sense.
The Adobe Online Forums is a new system that has data imported from two previous systems. One of the previous systems had its own message formatting codes, such as B for Bold and I for Italic. These codes import into the new system as plain text and lead to the formatting issue that you might run across on old messages.
I marked a reply to my question as the correct answer, but then discovered that it was not correct. Can I remove the Marked as Answered setting?
No, you can only set this for one reply and it cannot be removed. Please post a follow up message in the discussion thread with updated information, such as a clarification or rebuttal to the marked answer.
I am not clear on the points system in the Forums. Will I get points for simply posting questions or replying to questions?
No. Points are not given for simply posting a question or a reply. Points are awarded by the person who started a discussion. They can mark a reply to their question as either The Answer or as Helpful. They can mark one “Correct” answer and two “Helpful” answers per discussion thread.
I've clicked to edit my profile and now I'm lost. I can't get back to the discussion I was viewing.
Use the History link in the user bar.
Is there an alternative to the Rich Text Editor?
Yes, if you are comfortable with some basic HTML, you can click on the “HTML” link in the upper right corner of the Full Editor to switch to an HTML editor. If you use the HTML editor you need to remember to put in <p> and <br> tags between paragraphs, otherwise the HTML editor will remove extraneous white space (including carriage returns) in your message.
How can I Jump the last message in a thread?
Click on the XX minutes ago link in the list of threads to go to the latest message instead of to the first message.
How do I change my name or screen name?
At the very top of the page, click on “Your account”. Under “Account Information”, click on the “Edit Your Account Information” link. Edit the desired information on this page and click “Update”.
How do I change my email address?
At the very top of the page, click on “Your account”. Under “Account Information”, click on the “Edit Your Account Information” link. Your Adobe ID/email is listed here, and you need to click on the “Change” button. Enter your email address, your password, and click “Update”. Note that your email address is also your Adobe ID which you use to login, so if you change your email address, you will also need to login using the new email address.
How do I change my password?
At the very top of the page, click on “Your account”. Under “Account Information”, click on the “Edit Your Account Information” link. Your password is displayed as a series of asterisks (*****). Click the “Change” button. You will need to enter your current password, your new password, and a password hint. Click on the “Update” button to save your changes.

@ adobe-admin (J.C.?):
Thanks for fixing the "backslash" error. Accuracy is important, and doubly so when presented as an F.A.Q.
The sad thing is how prevalent the usage of "backslash" is when a plain old slash is meant (generally, the "forward" attribute is assumed and unneeded), and by people who should know better. It's a direct result of people knowing just barely enough about the Windows file path naming protocols, and then applying the only terminology they're familiar with incorrectly to URLs.
I went about 10 rounds—TWICE!—with a labyrinthian succession of people at the Discovery & History cable TV networks because they were saying "backslash" in voice overs whenever their commercials promoted their websites. It took some doing, but I finally got in touch with somebody who was savvy enough to recognize that it was a rookie mistake made by a clueless marketing copywriter. The voice over person just read the copy they were given, oblivious to the difference. It amazes me that it wasn't caught by somebody early in the recording/production process and rectified.
They then had it correct for about a year, until new commercials started popping up with the same error. Unfortunately, the person I had talked to previously no longer worked for the History channel and I had to go through the process of finding someone who understood all over again.
Yeah, you can call me a nitpicker with nothing better to do.
But I've earned that dang badge, and I wear it proudly!

Thanks for the new Forum!

I would like to personally thank and (welcome all others to thank) the administrators, moderators or anybody involved with the evolution of our new forum. This new feature rich format is by far the best I have seen and I am a member of quit a few other forums. MSI should consider themselves very fortunate to have such a great team working on their forum. I know as users we are very appreciative, Thanks again!
P.S. Yes it seems like you have fixed the slowdown problems as the pages seem to be loading at normal speeds again.

I too have benefited from good advice on my MSI K8n Neo2 mb questions. The members here are knowledgable and polite. Questions asked nicely are answered by good suggestions. Thanks to MSI for sponsoring such a useful owner's forum.

Welcome to our new forums!

Hey all,
We are very excited to announce the release of Edge Animate 1.0 and welcome to the community. During our Preview period we hosted our community discussions on http://forums.adobe.com/community/labs/edge/, which is now archived and read-only. We encourage you to continue your Edge Animate discussions, feedback, requests and bug reports here on our new forum.
To our new users, we hope you find this forum useful with feedback provided from both the core Animate team and valued community members. To our existing users, thank you for your invaluable contribution to Animate and for helping us shape the product you know today. We couldn't have done it without you.
Happy posting!
Sarah Hunt
Product Manager, Adobe Edge Animate

Animate Free is great news indeed A big thank to Adobe.
And even bigger thanks to those who made it all possible... huge kudos and thanks to all the ladies in the Adobe House (like Sarah and Elaine ^_^) and gents (Mark'n'Co!) who have been providing support 24/7 along with the whole Adobe Edge Team Wizards working their magic behind the scenes . Also thanks to the community members for being so helpful sharing their knowledge helping us dig each other out when one of us got stuck in a rut or found a major bump on the road.
I enjoyed being a little part of this evolution from preview 3 onwards as see how Edge now "Edge Animate" had grown into a more mature product. In a short time much has been accomplished and that's for sure an achievement to be proud of at all levels from the Adobe team all the way to those who blasted with requests and have been nagging Mark with unsolicited e-mail suggestions and feedback... yep, that'd be me and no I ain't done yet Mark since you haven't replied asking me to stop ! LOL
Either my emails have been auto-routed to trash, or you are listening in silence (judging to what happen between Preview 4~5 and 7). Those who may know what I sent over may be grinning proudly with a "we made it all the way down the laundry list... mostly" And I'd say yes you did... congrats for doing such a great job guys (and girls of course!)
Now I wouldn't want to quote "The Wolf" and repeat here what he said after Julius and Vince were done cleaning up the mess in the car at Jimmy's LOL ! So a mention should suffice for those who remember that scene and getting my drift, realize that despite this awesome achievement, there's still a lot to be done
It's an Edge, not a Peak... the Edge does not remain steadily in the same place and once conquered can be conquered all over again in the same way. An Edge is has a life of its own and is indeed "animated" as it keeps moving in various directions. So the the Wiz Team at Adobe have their job cut for themselves with all that will come in the future where the evolution will intevitably move towards making evem simpler and more intuitive the UI adding more interactive and powerful features to Edge Animate, while continuing to empower creatives across the globe by making the process from conceptualization to realization increasingly smoother, easier and painless via the intuitive Edge Animate workspace UI.
So once again thanks, kudos and much love to the entire community... and here is a toast to you all with the hope that we'll continue the journey in the same fun and fruitful direction that has led us here today.
Cheers!
tfbkny

Welcome to the new forums

Welcome to the new forums for GroupWise 2014. You can find more information about GroupWise 2014 at http://www.novell.com/products/groupwise/
Here you can ask questions, share experiences, and talk to others about your 2014 experiences and/or get the information you need about upgrading to this new version of GroupWise.
Thank You for participating with us in this community and sharing your knowledge/experiences!

Forums,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

X Series is here – New Counter Features!

Hey All,
The new X Series Multifunction DAQ devices have been announced – check them out here.
I’m posting here because I think X Series has several new counter features that many on this forum have been looking for. The user manual
will have all of these details and more with timing diagrams but I
thought I’d summarize a few of the sexier features and open it up for
comments/feedback.
First off – what stayed the same between
M Series/TIO counters and X series counters? The pinouts between M and
X series are the same so the PFI lines and default counter pinouts are
the same. The DAQmx programming is the same (you’ll need DAQmx 9.0, it
should be up this afternoon) and all the functionality that was
supported by M Series is supported by X Series, though a few behaviors
may have changed. Counters are still 32 bit.
Now on to
the fun stuff – the big one that I tend to overlook: X Series has 4
counters per board! They all have the same features and Freq Out is
still there too (with an additional 20MHz timebase).
Timebases:
X Series devices have 100MHz, 20MHz and 100kHz timebases. Note the
difference between 80MHz on M series and 100MHz on X series. DAQmx will
take care of the difference for you, unless you were programming in
terms of ticks and hardcoded in numbers based off of a 80MHz clock.
Counter
FIFOs: X Series has a 127 sample FIFO per counter. When combined with
PCIe/PXIe, our benchmarked buffered counter rates went from ~350k on M series
(with a 2 sample FIFO) with a single counter to 10MHz on all four
counters (160MB/s streaming rate). The FIFO also allows us to implement…
Buffered Counter Output: Probably my favorite new feature. You can
now use a multi point write on counters and write out a buffer of pulse
values. There are two timing modes for this: implicit and sample
clocked. With implicit timing, every idle/active pair you write is
generated as a pulse. You can vary the idle/active time for every pulse
in your pulse train. Check out the "Gen Dig Pulse
Train-Buff-Implicit-Cont.vi" shipping example. With sample clock
timing, the idle/active time are updated every time a sample clock is
received. Check out the "Gen Dig Pulse Train-Buff-Ext Clk-Cont.vi"
shipping example. These modes give you much more control over your
waveform – now everything about it can be hardware timed. Also, I’ve
benchmarked the output rates at 10MHz on all four counters at the same
time.
Finite pulse train with one counter: Each X Series
counter has an Embedded counter paired with it. The embedded counter
isn’t directly programmable, but it does allow you to do counter
operations on one counter that used to take two. A finite pulse train
used to take two counters – one to generate the pulse train and one to
gate it. Now a counter generates the pulse train, and its embedded
counter counts the TCs and disables the counter when it reaches the
number of pulses to generate.
More sample clocked
measurement modes: Edge counting and encoder measurements always
supported sample clocks, all other counter measurements were implicitly
(timed by the measurement waveform) timed. With the addition of the
sample clock terminal to the counters now all counter measurements
(except for semi-period) support sample clock timing. You can now get
the pulse width of the pulse just before the sample clock rather than
getting all the pulse widths and figuring out where they happened in
time. Why not semi period? We added a new “pulse” measurement instead
that returns a sample that contains the high and low time (or high and
low ticks, or frequency and duty cycle) so for each sample clock edge
you get a full pulse spec. Semi period still supports the same
measurements it used to, just not sample clocked. Speaking of sample
clocked…
Sample clocked frequency/period measurement
with averaging: X Series still supports the three frequency modes: Low
frequency 1 counter, 2 counter High Frequency and 2 counter Large
Range. In addition it supports sample clocked averaging. This is
essentially a method that is high accuracy method based on the sample
clock rate. With the same measurement time it has the same accuracy as
the Large range mode but it doesn’t take two counters. Note, counters
do not have their own internal sample clock so you have to provide them
with an external signal.
Hope this helps,
Andrew S
National Instruments
Multifunction DAQ Product Support Engineer
Getting Started with NI-DAQmx
Measurement Fundamentals

Hi guys,
I drew up a schematic of one of the applications I need to get running in our lab. To recap:
1)      We have several piezo controllers for nanopositioning of samples under a microscope, some of them driven by a digital circuit that handles coordinate programming and trigger line programming (for syncing detectors to the piezo motion), other controllers are analog and need to be driven by voltages.
2)      We would like to emulate the behavior of the digital controller using the analog HW (we have much more analog controllers than digital ones).
3)      The basic implementation is like this (see also slide one in the attached pdf file) and runs perfectly:
a.       A global pulsetrain ticks with a certain frequency
b.      At each tick a voltage is written on an AO line and this tick is also sent to an RTSI line to sync multiple detectors
4)      To fully emulate the digital controller we also need to implement 4 trigger lines that exist on the digital controller. These trigger lines allow for fully programmable pulsetrain output that is in sync with the movement of the piezo. Slide two in the attached pdf illustrates what is needed. These trigger lines allow for much more intricate syncing of our detectors (only measure during certain parts of the motion instead of all the time).
After a lot of thinking and experimenting with the existing M series boards back here I came to the conclusion that the desired behavior is not possible with an M series board since they only allow for the output of “simple” pulsetrains with a given frequency.
Looking at this webpage (http://zone.ni.com/devzone/cda/tut/p/id/9384#toc3) however, I think that the X series board would offer exactly what we need since it allows for buffered counter output that enables definition of very complex pulstrain “shapes”.
Looking at the schemes I provided, could someone confirm that the X-series covers our needs? If this is the case, we would be interested in purchasing these kinds of boards.
Cheers,
Kris Janssen
Attachments:
Raman Imaging Timing Implementation.pdf ‏76 KB

New forum not very user friendly (to me anyway!)

I may be missing the obvious. If anyone can post some pointer on how to use this new forum, I'd be greatful. Issues I have are:
1) I can't seem to tell which threads have new posts since my last visit. Some say "updated" after the title, but some which should be updated according to when the last post was don't say so, and vice versa.
2) Is there a way to get directly to the unread posts without having to go through the thread from the top?
3) Is there a way to navigate to other posts without having to return to the top of the thread?
These are just a few problems I'm having so far. Any help would be greatly appreciated.
Thanks,
Mike

the only thing I found remotely better, was the ability to upload jpg and screenshots... but the rest leaves a lot to be desired.
For example, when scrolling through the 50 or so posts on one page -> Then you press next -> next -> next page until you're at page 19... and find a post that seems exciting at the headline, you click it, and read it and find that "naaah, it wasn't about what I thought it was..." then you go back...
and voila!
You end up at page one again!!!!! Havin to klick - perhaps - 19 times next until you get to the next page, if you hade the abilitly to remember on what page that last post where... I mean, c'mon. Adobe.... ?! This huge giant have such lame forum technology?

Mark for Review Forum Feature hides posts after 5th time

Hi SDN and BPX Forum Aficionados,
The abuse button has another little known feature that has the potential to really improve the quality of forum content.
You mark a post for review by hitting the ! icon, select a category and please add a couple of words why and it gets marked for moderation.
If there are 4 other people that think a post doesn't belong to this forum, the thread automatically goes into hiding until a moderator has time to look at it and can take action accordingly.
It puts the community back into the driver seat. If enough people think a post doesn't belong it is gone. You have to be logged in to do this. See the [documentation|http://www.jivesoftware.com/jive/entry!default.jspa?categoryID=33&externalID=1321&fromSearchPage=true]
The threshold is set to 5 at the moment throughout all forums. Probably it will have to be fine tuned over time depending on how active a forum is.
This is going to be really interesting in 2008.
Happy New Year to all of you, Mark.

Althea Madigan wrote:>
> Does the offender get "notice" that the question/thread as been hidden and "why"? - keeping the reproter anonymous, of course - would hate to start a sniping war
>
> I think there should be some more obvious education/advertising of what constitutes "abuse" so that contributors and askers are aware of what is acceptable - Of course I suppose that this can be missued too.
>
> PS - I had been looking for an explanation of the "report abuse" icon and "SEARCH" revels very little. Your topic: "Mark for Review Forum Feature" contains no word related to "report abuse"
Hi Althea,
Happy New Year to everyone.
At the moment the poster doesn't get a message automatically. Once a moderator has looked at it and rejected the post, there is a possibility of an email being sent. We are looking into that.
It is true, we have to explain a bit more about the functionality of the Report Abuse feature.
Will do so soon, Mark.

NEW FORUM DESIGN: Post Feedback Here

Posting everything in one place will allow Comcast to better monitor what feedback is given.

andyross Member Since: ‎10-17-2003 Posts: 3,647 HORRIBLE Forum updateShare Topic Options Subscribe to this discussion Are you deliberately trying to make the forums so hideous that nobody will use them? The subject text is so tiny, I can barely see it, plus it's virtually impossible to see the difference between read and unread. The subject listings have a huge amount of wasted space between them. You could double the number of on-screen lists (or shorten the scrolling) if you cut it down. There used to be a link on the right that would take me back to the Bookmarks page (what I use as a home page for these forums.) No easy way to get back there that I can see, other than directly from my browser bookmark. At least the text entry seems to properly work with Firefox. Posted on :‎03-09-2015 05:22 PM Kudos 0ReplyFollow Options ResponsesReply Posted byWelcome_to_Post Member Since: ‎07-02-2003 Posts: 5,381 *sigh* Happens every. Single. Time. They downgrade upgrade the forum software. Too bad no one listens to us. Posted on :‎03-09-2015 05:26 PM Kudos 0Reply Options Posted byQueen-Evie Member Since: ‎02-04-2004 Posts: 14,621 One not-so-wise new "feature" is that when a topic is more than one page long the FIRST post of the topic is now at the TOP of each topic page. If that post is long that is just some extra scrolling to do in order to get through it and to the replies.And if you are at the bottom of the page and scroll back to the top you gotta get past the first long post on your way back up the page. There is no clear demarcation between posts. Posts are no longer numbered. About the only things that are good are that the toolbar features when replying now work with SeaMonkey and Firefox and other browsers AND the default font size seen when composing a reply is big enough to easily see instead of being teeny tiny as it was before. Yippee!!! No more nose prints on the screen when trying to see what I was composing.
Comcast employees must be authorized to post in the forum in an official capacity. Employees posting here have their names in red and are designated as employees. Names not in red are customers. This is done to protect customers and for assurance that they are dealing with a Comcast employee.
Non-Authorized Employees are allowed to post but cannot state they are employees nor can they allude to being employees. Posted on :‎03-09-2015 06:40 PM Kudos 0ReplyFollow Options Posted byQueen-Evie Member Since: ‎02-04-2004 Posts: 14,621 Do me a favor. Repost this here http://forums.comcast.com/t5/Xfinity-com-Website/NEW-FORUM-DESIGN-Post-Feedback-Here/td-p/2490433 After you do that, I will lock this topic. To anyone else who wants to post feedback do so in the topic I linked to.

How to add 'forum' feature in my personnel website ?

I am new to web-development and Dreamweaver. I have one static personnel website which was developed by using Dreamweaver. I used to give online training to college students. Interacting with students all the time is not possible. I would like to add 'forum' feature in my personnel website, so that student can post their Queries and I can get opportunity to answer in my free time. And access to my forum is allowed to registered users only.Please share the tutorial for implementing this idea to my website using Dreamweaver .
Your suggestions are valuable.

Start with your web hosting provider. Some hosts have Forum plug-ins you can activate in your server's Admin or C-Panel. If no such feature comes with your hosting, you'll need to find out which server-side programming languages and databases your server supports. Also make notes about the versions of each as this will effect which Forum solutions you can use.
Then figure out what features are most important to you:
Price range,
How many forum members can it support at once?
Automated or manual Sign-up process?
Can it be customized?
Emoticons,
Avatars,
WYSIWYG editing,
How complex is the set-up & maintenance?
How about tech support?
Etc...
Nancy O.

New forum features, again

Similar Messages

Maybe you are looking for