New hard drive affects boot time?

Greetings,
I just installed a 320gb 5400 Western Digital into my Macbook to replace the 120gb 5400. Now it takes 55 seconds to boot my Macbook, when before it took about half that time. Any reason that's happening? Anyone else experience this as well? Any solutions? I am not seeing any loss in performance once it's booted.
Thanks so much!
David

My 320 takes about 50 seconds from initial button push to usable system. One thing to consider is that the OS checks the drive on startup. You now have a drive that is probably at least twice as big as your old one. In my case 4 times as big. I had an 80 GB. To me it seems pretty fast considering the size of the drive. I tested the overall performance of the two drives and the 320 GB drive is much better than the original 80 GB drive. My WD drive was 54 and the 80 GB drive 36. I used XBench to test it.

Similar Messages

Install new hard drive, restore from Time Machine, File Vault Problems

Hello all,
I spent way too much time on this seemingly simple task, so I thought I would share my experience with others so they can avoid some pitfalls when upgrading a hard drive in a system that uses File Vault 2 encryption. The basic goal here is to replace a drive in a system that has only one drive, and the OS is Mavericks, and then have the new drive encrypted as before.
The problem is that a Time Machine restore onto a new drive will leave that without a Recovery Partition, which is required for File Vault 2 and some other important things. So we need to build a recovery partition. There are possibly several ways to do this.
Here's what worked for me (this is compiled from many sources that I found and already closed the tabs in my browser so I can't list all my sources):
1) Make a full backup to an external hard drive using Time Machine.
2) Go into the App Store and download OS X Mavericks but dont install it (close the window when it pops up asking to continue the install). Do this even if you already have Mavericks. At this point, there will be a folder in your Applications folder called Install OS X Mavericks (or similar).
3) Insert a USB drive that is at least 8 GB and format it using Disk Utility, naming it the default "Untitled".
4) Open a terminal and type
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
5) Wait for this to finish (took me about 30 min). Eject the USB drive and power down.
6) Remove the old hard drive and set it aside. Keep it for a few weeks until you know the new drive is working as expected.
7) Install the new hard drive and insert the USB drive. Hold the option key and press the power button. Choose to boot from the USB installer.
8) Use the disk utility to erase whatever partition shipped with the new drive, replacing it with a Mac OS Extended (Journaled) system. Verify that GUID is the partition type (in Advanced options).
9) Close the disk utility and install Mavericks. This can take a long time. My new drive is an SSD, and it sat at the "1 second remaining" part for about 20 min. Let it reboot (maybe it was 2 times?) and go through the setup until it finishes the install.
10) Boot into the freshly installed OS and open a terminal and type:
diskutil list
11) If there is a partition listed as Apple_Boot Recovery HD (mine was 650 MB), then you now have a recovery partition. If not, then go into the App store and download Mavericks, but don't use the USB this time, choose to do a regular install (or reinstall to be more correct).
12) Now there will be a recovery partition on the new drive and Time Machine will not overwrite it when restoring. Power down the system.
13) Plug in the Time Machine backup drive used in step 1. Press the option key and power on. Choose to boot from the recovery partiton (Mavericks).
14) Choose to restore from Time Machine backup. Wait until it finishes and log into the old familiar account.
15) Start a terminal and verify the recovery partition is still there (type diskutil list and see that the Apple_Boot Recovery HD is there). If it's missing, choose to download Mavericks from the App Store again and run the installation from this one.
16) Once there is a Mavericks recovery partition on the restored data you can simply turn on File Vault from the System Preferences Security section. It will require a reboot and then you login and wait for it to finish.
What a major pain to go through all of this for the sake of upgrading a hard drive. This should not be anywhere near as complicated. I hope this helps others avoid the very time consuming trial and error I went through in developing this procedure.

Talked with Apple last night. Everything we did to restore lost images failed to fix the issue. I did have the images still on my camera's SD card so I was not breaking out in a cold sweat.
All Time Machine backups showed the same issue. HOWEVER, I suddenly remembered I also had a SuperDuper backup and voila. The images were there.
Moral of the story: you can't ever be too rich or have too many backups (I also have an offsite backup).

Installing a new hard drive and using Time Machine to Restore system

I just upgraded a Macbook (2006) hard drive and had problems importing the Time Machine backup. The problem was that the initial install discs were for Tiger, which did not support Time Machine. After numerous attempts at a work-around I solved this problem the following way:
I connected the 2006 Macbook (with new hard drive) to a newer Macbook (with Firewire port) - one with install discs for Leopard (which supports Time Machine).
I launched the newer Macbook with the install disc (#1)
I connected the two Macbook via firewire cable.
I launched the 2006 (new hard drive) Macbook in the Target Disc mode.
I connected the USB external hard drive containing the Tme Machine data to a USB port in the newer Macbook.
Next I went to the Utilities Menu on the Macbook (operating from the Install Disc) and selected Time Machine. I followed the prompts to match the source and destination. The process worked fine.
The above assumes that a new hard drive is properly formatted using Disc Utility per Apple's guidance prior to the Time Machine restoration described above.
Cheers.
Bill

Bill,
No, the glass is half full!! In this case, we (collectively) have three things to brighten our day:
1) That I was mistaken, and that your usage is completely legitimate. I definitely prefer this to what was inherent in my erroneous assumption, and I do not mind being wrong (not in the slightest).
2) That we can be clever enough to overcome obstacles, then go out of our way to share our newfound knowledge with others. More specifically, that you have done so.
3) That we are willing to police ourselves, if and when one of us might go astray. Even if I was wrong in this case, isn't it nice to know I am willing scold someone for being less than honorable?
Perhaps my greatest mistake was the assumption that, if you had the proper disks at one time, you would still have them, or would have said so in your initial post. My apologies. Technically speaking, the media for a given OS should always be somewhere in your possession when running that OS. In practice, however, I strongly believe that some "wiggle room" exists, guided by common sense. In this case, I believe that the fact that you purchased said media gives you a pass, regardless of whether or not you know off the top of your head where it is.
There. Are you still saddened?
Scott

Mac OS X (10.4) Clone To New Hard Drive - Not Booting

Hello folks,
I have recently bought an iMac G3 Snow, w/ 500MHz processor. This things works well with Tiger installed, but has quite a noisy hard drive. I wish to replace the hard drive with a newer, faster, and quieter 30GB hard drive that I happen to have spare.
I had booted the iMac in "Target Disk Mode", fired up my Macbook Pro, and connected the two computers via Firewire. I had then made a successful image of the iMac's HDD using Disk Utility. I then removed and replaced the hard drive in the iMac, and proceeded to restore the image to the new hard drive using Disk Utility again, also via Target Disk Mode.
Upon successfully restoring the image, I rebooted the iMac, only to find that the iMac cannot find the appropriate boot files. (ie, Question-mark w/ Finder folder logo error).
Any help to fix this would be muchly appreciated.
Many thanks,
Andrew

Hi Jeff - many thanks for your help. Unfortunately, I am still unable to boot from a clone made with SuperDuper or Carbon Copy Cloner.
I'm starting to focus my troubleshooting toward the iMac, or hard drive itself. These are my thoughts, if anyone could suggest any other places to poke around for inquiry.
- the Maxtor 30GB replacement hard drive is being recognised successfully in Target Disk Mode by my Macbook Pro. This shows that the hard drive works correctly, and that the iMac can access all of the data on the hard drive. The hard drive is set to "Master".
- when creating clone in either SuperDuper, or Carbon Copy Cloner, the clone processes report that the final clone on the new hard drive will be 'bootable'. This is reiterated when I look for the 'information' on the one partition in Disk Utility.
I have also reset the PRAM and NVRAM and the Open Firmware, to no avail of the hard drive booting into Mac OS X.
I have looked into my Open Firmware settings to see whether there may be a setting to specifically direct the Mac's bootloader toward the "BootX" file on the hard drive. When querying the 'boot-device', the Open Firmware's response is "hd:,\\:tbxi" - is this the correct function to have?
When I purchased the iMac, the Tiger 10.4 PPC DVD/CDs were not included with the purchase. I'm trying my best to fix the problem without the discs if at all possible.
Any suggestions as to where I can go to help my mac boot into Mac OS X again would be muchly appreciated. Thanks.
- Andrew

New hard drive help (first timer)

alright, i bought a new hard drive to install into my macbook pro, as i am running out of space on my current hard drive, i bought a new one from OWC and it came with this little "instant external" pack to make the hard drive into an external so i can prepare it for making it the main hard drive. my dilemma is that i dont have my snow leopard recovery disks anymore, i must of lost them when i moved, is there anyway to put snow leopard onto the external(but going to be the new main hard drive)?
if not, is there a way i can make new recovery disks?

I am assuming your new drive is a lot bigger than your old one. So why not simply clone your boot drive on to the the new drive mounted in an external enclosure?
You can use any backup utility capable of cloning a bootable backup. Carbon Copy Cloner and Super Duper are two such utilities. I believe even Disk Utility's Restore function can do it too.
Once you have the clone, remove it from the enclosure and stick it in your machine.

New Hard Drive Not Booting Up OSX

Hi,
Ive just purchased and installed a new blank hard drive, using "Carbon Copy Cloner" ive cloned the original hard drive to the blank new hard drive. Once the clone is complete i cannot boot up from my new internal hard drive. When i startup i get a finder icon with a question mark inside, I can boot from my old external hard drive but i want to wipe this and have everything running from my new internal HD as it has a much greater capacity.
Can anyone help with this???

Welcome to the Apple disucssions.
For Cabon Copy Cloner to create a bootable drive, the following conditions have to be met:
1. The target volume cannot be a disk image -- you cannot boot your Macintosh from a disk image.
2. The source and target volumes must be local volumes -- CCC cannot determine the bootability of a remote volume.
3. If the Macintosh is a PowerPC Macintosh, the target device must be an internal volume or on a Firewire hard drive.
4. The files and folders required by Mac OS X must be present on the source volume. These include: /Library, /System, /bin, /etc, /mach_kernel, /private, /sbin, /tmp, /usr, and /var.
5. The files and folders that are required by Mac OS X must be selected to be copied to the target volume (applicable only to the "Incremental backup of selected items" cloning method).
6. If the Macintosh is a PowerPC Macintosh, the hard drive on which the target resides must be partitioned using the Apple Partition Map.
Does your setup meet these requirements?

New hard drive not booting osx from external

Hi guys, I currently installed a new hard drive into my macbook, and I tried holding down the alt//option key to try and boot osx from my external hard drive ((Connected through USB)) but nothing happens. My mouse cursor appears, but nothing shows up. I tried 5 minutes ago to make sure that I was actually able to boot to my external drive from my old hard drive, and it worked perfectly. But nothing shows up on this end. Any help or suggestions?
thanks!

any one have any insight?

Cannot sync my iphone to imac after new hard drive install and time machine restore. Does not see device

Had a new hard drive installed
IMAC does not see iphone therefore cannot sync

Did you already try these suggetions?
iOS: Device not recognized in iTunes for Mac OS X

How to restore my old hard drive into a new hard drive using my time machin

My HD in my Mac Book died. Thank to the apple care Apple change it to me.
Now I have a new HD with nothing on it.
How do I use the backup in the Time Machine to restore my old hard drive?
As far as what I knew I am supposed to have all my old data, applications, and more by doing something with Time Machine.
Thanks

hi,
i have been through this. First if apple techs replaced the drive you do have something on the drive. your internal drive can boot the machine although your user settings, network settings and third-party software applications are net set up.
here's what you do.. connect the time macine drive and turn it on. now boot your macbook. watch the 'welcome movie' and don't panic. you will recieve setup instructions from the macbook. you will of course designate the system language to be english. Now an option screen will appear. there are options for setting up the new computer include using a firewire cable and transfering stuff from another macbook. ignore that option. you will see an option to restore settings from a time machine drive. bingo! choose that.
get the transfer started and go away. usb restoration of big internal harddrives by time machine is **** slow. (it should be slow for alot of technical reasons. don't blame apple.)
make sure you have the macbook plugged into an electrical outlet, not running off battery because this can be an overnight process.
so now you're good to go

Toshiba A500-1H1 after recovery on new hard drive cannot boot

Hi, I had to replace hard drive because old one is broken. I used recovery media I've created after opening laptop first time as you suggested with Toshiba support. Recovery is fine, but during windows configuration I had information about not certified signatures and windows cannot boot. There is error suggesting that maybe hardware was changed. So my question is ? Buying Toshiba laptops I cannot change my harddrive, so if any part of Toshiba is broken I have to buy new notebook ? Or maybe I can access to my Windows764bit key and download from microsoft windows and install and configure this by myself ?
Please help, I need this notebook for work ! Best Regars,Paul

Hi, thanks for your reply - I FOUND A SOLUTION, a quick description about my problems is below. 1. First of all. My Toshiba HDD is broken in that way that it cannot be booted. I did a couple low level tests (one took about 90 hours !!) and surface is free from bad sectors. Disk is in very good condition, but I suppose controller in disk is broken because everything is installed correctly, recovery takes about 20 minutes and after rebooting I have typical information about problem with reading boot information, BCD, 0xC000... And so on. So disk is working now as storage on usb. This disk was 320GB - original from Toshiba. 2. Then I tried use new one disk: Samsung 1TB. And I had this problem with booting again, but info from windows was about not certified drivers (when it tried install WiFi, and other drivers). Then I post this post here, but meanwhile I contact my support in Poland and they suggested me there can be a problem with DISK SIZE - they said this is TOO BIG FOR RECOVERY.. That was very strange for me - I heard first time the problem can be with too much space, not with not enough space Anyway I decided to buy new SSD 250GB (smaller than original Toshiba) hard drive. My recovery took me about 10 minutes. I have SATA3 SSD but Toshiba support SATA1, but anyway my computer seems to work 3x faster than before
So the problem was with original disk, controller (boot sectors maybe), and with too large new disk so Toshiba recovery disk couldn't manage.
Thank you for your concern. Best Rgards !

New hard drive, restored with time capsule -- safari won't open

Just successfuly replaced my crashed 500gb hard drive with a 2TB drive. Used time capsule to restore the system (what a godsend), but now programs on the computer arent working. I tunes opens, then crashes, the app store just bounces down in the application bar for a while then stops, safari opens 80% of a page and then the window crashes and goes away. I get a feeling it has something to do with my recent repairs, but what? Any help would be appreciated. this is very frustrating.
Original system is a white intel iMac 500GB 20 inch screen EMC# 2018.

ok, sorry for being new at this, but I just tried "repair disk" and have an almost infinite array of permissions errors....so many that it crashes when doing the repair. Is this a problem with the drive itself, or the fact that i restored an entire system onto a new drive? Either way, is it fixable?

New Hard Drive - Cannot Boot From Install Disc

Hi guys,
I just replaced the hard drive in my macbook and I want to re-install Tiger on the new drive. When i insert the install disc and hold option on startup, the cursor appears but no boot options. When i hold c, nothing happens at all.
When i put the old hdd back in, both the hdd and the install disc appear as boot options, but nothing with the new drive.
Any ideas??
Thanks

Use the original OS X Installer Disc One that came with the computer. Insert it into the optical drive and restart the computer. After the chime press and hold down the "C" key until the spinning gear appears below the dark gray Apple logo. The first thing you must do before installing OS X is to prep the new drive:
Extended Hard Drive Preparation
1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
Once formatting has completed quit DU and return to the installer. Complete the OS X installation.

How do I restore a new hard drive from a time capsule backup?

Going tomorrow to pickup my iMac at the Apple store after a 1TB hard disk replacement. Time capsule backed up about 1 hr before the disk failure. What are the steps for doing this restoration properly? I'm very nervous about this process & I don't wanna start this process the wrong way. I have read horror stories in different threads about going at this the wrong way. Thanks in advance for any help

Since you will have a "new" iMac, If it were me, I would start right here....with info from top guru Pondini.
Time Machine -- Frequently Asked Questions
http://Pondini.org/TM/FAQ.html
See # 19
Apple has some good info on restoration as well in Time Machine 101
http://support.apple.com/kb/HT1427

Dv9000 new hard drive wont boot

dv9000 had smart hd failure replace hd. did that now it wont boot from cd to recover from disks. All i get is operating system not found. Please help
This question was solved.
View Solution.

OK...after a lot of trial and error. It works.
Created iso from files I found online for vista home premium 64 bit
Then used wintoflash to make bootable flash stick.....fail. tried again on a my passport portable HD. Success!!!. Will boot from external HD but will not from a flash drive.

I have Photoshop CS5, and I am re-installing it on a new hard drive. Every time I try to install the updates, it says download failed, and won't install any updates.

I have tried installing one update at a time, several together, and all at once. I have tried yesterday and today.
What can I do to get the updates to download correctly and install?

This is what I am seeing when I try to install an update:
"There was an error downloading this update. Please quit and try again later"

New hard drive affects boot time?

Similar Messages

Maybe you are looking for