New key figures in multiprovider not visible in query designer

Dear Experts,
I added a cube and keyfigures to the multiprovider definition.
The multiprovider is activated successfully.
The added keyfigures come only from this new cube.
I identified these new keyfigures to this new cube only.
There is an existing query based on old version of the multiprovider without the new cube.
When i relaunch query designer and re-open this query, i could not see the new keyfigures.
When i create a new query, also its not showing the new keyfigures.
Is there something not refreshed that I do not see these new key figures?
Kindly advise. Thank you!
Best regards
Bass

Hi,
Some time it happens that newly added key figures and characteristics are not visible immediately in Bex query designer. Just check for warnings if any encountered while activating else try editing and re activating your Multiprovider and also proper field assignment.
Newly added Key Figures should be visible in both New and Old queries without any differentiation. Just log off and log in back after some time, there is a good possibility that this inconsistency would be resolved.
Regards
Raj Rai

Similar Messages

Mapped characteristics in Multiprovider not available in Query Designer

Hi,
we have a multiprovider with approx 10 cubes and lot of characteristics, Navigational attributes mapped to it. I have added around 3 more characteristics and mapped to underlying cubes. But these added characteristics are not visible in Query designer. Is there maximum limit for the number of characteristics.
Thanks,

Disconnecting the BEx made it work. But i dont understand i added this yesterday in the multiprovider. But i also removed some navigational attributes from the mapping. I will re-map and check. Thanks for the tip.

New key figures in multiCube not available in old query

Hello every one,
I created new key figures in a mult Cube but not I wish to put them in the query based on this multi Cube and the figures are not there.
I already actived the multi Cube, also sign on and sign off the BEx, generate the query using rsrt but until now no solution.
Can you help me out?
Thnaks

did you add the fields using the query designer....
also make a double check that this query is based on that multiprovider...
rgds, Ghuru

KeyFigure from MultiCube not visible in Query Designer

Hello,
I'm facing a strange issue. I added a new Key Figure to a MultiProvider. All identifications have been done and MP is active.
However, when I try to create a new query on top of this MultiProvider or change an existing query , I cannot see the new KeyFigure in the list of Key Figures.
Has anyone any idea how this can happen and what can be done to get this resolved?
I haven't ........

Just resolved it by simply doing a re-activation of the MP (even if it already was active ????).

Attribute not visible in Query Designer

hi BI Gurus,
I could not see some InfoObjects(Attributes) which are marked Authorization Relevant, in the query designer. And the strange thing is, they are not visible even for the user with SAP_ALL and 0BI_ALL assigned. The authorizations for the cube in which the main char is used looks fine.
I have checked all the options in RSECADMIN, everything looks good.
pls help me in finding the solution..
thanks
Cnu..

check out with the info object screen in attribute tab, navigational attribute on/0f switch box, if u r using FF source system.
check out with the infocube whether u r checked the check boxes in navigational attribute tab.
regards
harikrishna.N

Variable not visible in query designer

Hello,
I have 4 variables created for an InfoObject. But for one of my query written on Infoset, under that InfoObject in query designer it only shows me 2 variables.
Any ideas what is causing the other 2 variables not to be visible?
Thanks in advance,
vamsi.

which type of variables have you created?
Regards,
Chandra.

Hierarchy not visible in Query designer

Hello Experts.
I am trying to create a query in BW 3.5 but I ran into one issue. I created a hierarchy for an Infoobject. But I am not able see this Hierarchy for the Infoobject in BW 3.5 Query designer although I can see it in BI 7.0 Query designer.
Any help in this regards will be appreciated and points will be assigned.
Than

Check if you have made the "hierarchy" Active in your BW 3.5 query and also chosen the hierarchy correctly.
Right click on the characteristic----
> properties.
Hope this helps.

BC installed BEx Variables are not visible in Query Designer

Hello,
I have installed SAP Exit BEx Varibales from Business Content (0P_KEYDT, 0P_KEYD2 and 0P_KEYD3)
sucessfully.
But when I am not able to see these variables in the Query Desginer ( Need to restirct these on Net Due Date, Posting Date).
Please advise me on this.
Thanks,
Geetha

Are you sure you have the characteristics on which these variables are defined y SAP are in your data target?
Pl check this out. Alsso, sometimes, if you log out and get back, it may help.
Ravi Thothadri

Added new key figure in the report

Experts,
I have added new key figure in the report .If i display this key figure value in the report it is populating correct value with ERROR(example 22.5 ERROR).The report is on the multiprovider .i have check the value for this in multiprovider it is populating correctly .There is no calculation in the report for this .While extracting in to report i am getting this. Help me to resolve this issue.
Thanks
Murali

Hi,
I have already created a formula like NODIM(Key field).that only i am using .
and mapping I did in this way. I went to multiprovider and I have selected this key figure and right click and select (assign) then I have click on create proposal for all infoobjects option.
Please suggest any thing need to do.
I am sorry .I did not understand the lonterm solution suggested by you .what is UOM .Please tell me how to map.can you pls tell me clearly please
Thanks
Murali

Adding a new key figure to Info Cube

Can I add a new key figure to an existing Info cube in which data is loaded?
Assume that In Info Cube we have the following.
Stu Id -- Characteristic
Maths , Physics , Chemistry -- Key figures
These are the info objects which are already available and transfer rules are already available for the same in the infosource.
Could any one let me know how to add one more new key figure (total ) , which is the sum of the three marks to the Info Cube and populate the data in to the same.
I have tried the following steps , but could not get the solution.
1). Create a new key figure info object (total).
2). Add the same to the communication and pull the same into transfer rules of the existing info source and activate the same.
3). Add the new key figure to the info cube.
4). Open transfer rules for the info cube and change the mode from NO updation to Addition for the particular key figure (total).
When I perform the 4th step it is giving a red symbol beside the key figure in update rules and I'm not able to activate the same.
Any help on how to add key figures to update rules and transfer rules is highly appreciated and points would be assigned.
Thanks

1.add new Keyfigure to Infocube.
2.Go to Update rules> go to update type of that Keyfigure>selct formula in update method>create new formula>here you can add up your 3 keyfigures-->OK.
activate update rules and InfoProvider.Check all are active or not..
by using Export generate datasouce ,you populate data(historical data) to new keyfigure as well.Then you have to delete historical data requests.
or iyou can create formula in query designer as well as srinivas suggested.that would be better option.

Adding new key figure in Info structure

Hi all,
I am in a need to add a new key figure to our info structure here in my company.
The way I understand it is, it would be best to create a NEW info structure and copy all existing key figure and characteristic and then insert my new key figure into this and rewrite the macro if required.
So my question is
1. How to determine which info structure is currently in use in my company? If i check in MC89 - the key figures match what is in Info structure S076. So is it safe to assume that we are using standard S&OP in my company? Is that a correct way to identify the currently used info structure?
2. For our KMAT, when i open a planned order I see that there in another info structure (not S076) under configuration tab. So can we have diff info structure in use at a same time ?
Please guide.
Thanks,

Hi Nisha,
1. First of all, How would I determine which info structure is being used at this time in my company?
I need to know this so that when I am creating my own custom (S500 - S999) info structure, i can copy the existing KFs and Characteristics and add them to my info structure and then Add a specific key figure on top of that.
Info structures are nothing but tables so in se16 you can check which are Info structures are having update values.
Yes you can add the specific key figure on existing self defined info structure in MC22 after that you need to generate it.
2. Can multiple info structure be in 'use' at the same time in any scenario?
For self defined info structure are application specific you can not have multiple info structure for same scenario. If you take the example of flexible planning with self defined info structure then you can transfer the demand from only one info structure.
Regards,
R.Brahmankar

Addition of new key figure in ODS

Dear all,
In ODS, delta is loaded everyday through process chain. Now according to business requirement, we need to add one more key figure in it. I don't have to map it with any of the R/3 field. Only i have to create update routine to assign value in it using already existing key figure.
Can i directly add new key figure in the ODS? Will it affect my data present in ODS as well as daily delta load process?
If i can do this, can i assign exact 'key figure' value for the existing data also?
Please guide me for the same. We are using BW 3.5.
Regards,
Omkar.

Hi,
I am not sure that it is true that you need to delete data. I am sure one can add a field to the ODS without deleting it. The field will remain blank after creation, unless you fill it:
1. manually using a flat file for past data; mapping will work for subsequent data
2. Use a self reference if the value is already present in another key figure.
The change may take a long time to activate depending on the following:
1. Size of the ODS
2. Existence of indexes.
However, as you are running a delta you need to be careful of the delta queue if you also intend to touch the datasource.
Cheers....

How to append DATA_PACKAGE strucutre to include new key figures?

Hi,
Iu2019m a newbie to ABAP and need some help with a start routine in BW 3.5
In the source DSO I only have the u201CYTD amountu201D key figure. The destination DSO should also contain the key figures u201CCurrent month amountu201D (ZAMTMO) and u201CLast 12months amountu201D (ZAMTLTM). So in the transfer rule I want to have a start routine to do some calculations and add the 2 new key figures.
I use an internal table LCYEARDATA do the calculations:
DATA: LCYEARDATA type sorted table of /bic/aZHYP3_O00
        with unique key CALMONTH /BIC/ZHYP_ACC /BIC/ZHYP_ENTI
        /BIC/ZHYP_SUBA /BIC/ZHYP_VERS
        with header line.
IF DATA_PACKAGE IS NOT INITIAL.
   LOOP AT DATA_PACKAGE.
*Get the YTD This Month.
    READ TABLE LCYEARDATA
        WITH KEY
          CALMONTH = DATA_PACKAGE-CALMONTH
          /BIC/ZHYP_ACC = DATA_PACKAGE-/BIC/ZHYP_ACC
          /BIC/ZHYP_ENTI = DATA_PACKAGE-/BIC/ZHYP_ENTI
          /BIC/ZHYP_SUBA = DATA_PACKAGE-/BIC/ZHYP_SUBA
          /BIC/ZHYP_VERS = DATA_PACKAGE-/BIC/ZHYP_VERS.
      IF sy-subrc IS INITIAL.
          YTDTHISMONTH = LCYEARDATA-AMOUNT.
ENDIF.
*Last 12 Months = (YTD Last Year - YTD Month Last Year) + YTD This Month
    LAST12MONTH = YTDLASTYEAR - YTDMONTHLASTYEAR + YTDTHISMONTH.
*Save MONTHLYVALUE and LAST12MONTH to the DATA_PACKAGE.
     DATA_PACKAGE-ZAMTMO = MONTHLYVALUE.
     DATA_PACKAGE-ZAMTLTM = LAST12MONTH.
     modify DATA_PACKAGE.
    ENDLOOP.
ENDIF.
Since the DATA_PACKAGE have the same structure as the source DSO, and donu2019t contain the new key figures, I canu2019t add the new calculated key figures at the end of the loop. I get an error message saying that ZAMTMO and ZAMTLTM canu2019t be found.
So the basic question is: How do I append the structure of the Data Package so it can include the new key figures?
Best,
Johan

Hi Karsten,
Similar post... have a look...
Re: data package error
DATA: varighed TYPE i.
wa_temp type DATA_PACKAGE_STRUCTURE OCCURS 0
WITH HEADER LINE.
LOOP AT DATA_PACKAGE into wa_temp.
varighed = 100.(<b>What this means....?? condition..?</b>)
wa_temp-/bic/iotvarig = varighed.
wa_temp-/BIC/IOTOBJFOR = 'TEST'.
-->> <b>you have to write modify wa_temp</b>.
modify wa_temp.
ENDLOOP.
REFRESH DATA_PACKAGE.
LOOP AT wa_temp.
APPEND wa_temp TO DATA_PACKAGE.
ENDLOOP.
Hope it Helps
Srini

How To Add New Key Figure in Manual Planning

Dear All
Please Help
I Already implement BPS for 2 year.
Now user want to add new key figure in Cube.
I already add new key figure to cube and activated it.
But in Manual Planning, The new key figure not show in selection
what I must do?
Please Help.
Thanks

Hi,
not all key figure types are supported in BPS.
1. All key figure types must have aggregation SUM, SUM.
2. Supported key figure types:
- amout
- quantity
- number (integer, float, dec)
- time, only type DEC
- datum, only type DEC
All other key figures are filtered out and are not available in BPS.
Regards,
Gregor

Hi Gurus, To Add New key figure in BW 3.5 flow ODS- Infoset

Hi Gurus ,
I have rquerimennt to add a new keyfigure in ODS and then into Infoset . The histrorical data for this keyfigure is not needed . Can you please let me know what the are changes needed to be done in Transfer structure -> cs->updaterules->ods->infoset.
should i delete data from dso before I add keyfigure?
Rehards
sriram

Hi
are going to get the values for the new key figure from source or is it going to calculate in BW side?
If yes, then add that key figure in source DS, replicate the same BW system.
Now add this key figure to your ODS and activate.
create transformation for this. and activate.
as this is key figure, you will get data for this in info set automatically.
Regrads,
Venkatesh

New key figures in multiprovider not visible in query designer

Similar Messages

Maybe you are looking for