New-MailboxExportRequest gives PSTs which need repairing

Hi,
We're currently exporting a large number of mailboxes to PST in preparation for an Office 365 migration using the New-MailboxExportRequest command as follows: New-MailboxExportRequest -Mailbox $username -ContentFilter {Received -lt $date } -BadItemLimit
50 -FilePath \\servername\archives -MRSServer CAS1
This works however the archives contain a large number of corrupt items (in the hundreds) and need to be repaired using PST repair tool.
How can we prevent this from happening?
Thanks,
Bryan

Hi,
First of all, New-MailboxExportRequest cmdlet will not cause items corruption.
We can set the BadItemLimit parameter to more than
50 with AcceptLargeDataLoss
parameter. The valid input range for this parameter is from
0 through 2147483647. If we set the value to more than 50, the value should be around the number according to the numbers of corrupt items. But
any corrupted items aren't available after the process is complete. Apart from this, there is no way to prevent New-MailboxExportRequest from giving PSTs which need repairing based on my knowledge.
If these corrupt items are very important, I don’t recommend this operation. And I suggest to use PST repair tool to repair corrupted items after we use New-MailboxExportRequest function.
Best Regards.

Similar Messages

Why is my DiskUtility no longer finding any permissions which need repair?

In the past 4-6 weeks Disk Utility, both on my iMac and my MacBook always gives me a clean bill of health when I use it to verify/repair permissions.
In the past, I alwyas have had something which had to be repaired.
Bothers me that Disk Utility finds nothing. I install,uninstall lots of software and would expect permissions need tweaks after installing Security patches and such
IS it possible that a recent OS patch (security or other) has affected Disk Utility?
It just does not seem right that suddenly no permission needs repair.
Any one else finding that they , too, now always have clean bill of health with permissions, using Disk Utility?

I think some of the gurus to whom you refer need an education.
We all recommend repairing the hard drive and permissions before installing new software not because it's a requirement but because it's a precaution against poorly maintained systems. Doing so will help prevent problems for users who simply don't know what they are doing or never maintain their computer properly. Even toasters need to be cleaned once in a while, if you get my meaning.
Recently Mac World ran a couple of pieces on the subject that you should find interesting reading:
Repairing permissions- What you need to know
Take Control of Permissions in OS X
Also, Permission Repair- The Full Story and Repair Permissions- A false panacea.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

What happend New-MailboxExportRequest cmdlet in exchange 2013 SP1 is missing?

Cmdlet New-MailboxExportRequest is not recognize cmdlet in Exchange 2013 SP1
How can i do export mailbox to pst file in exchange 2013 SP1?

You might be facing this issue because of not having the rights to execute the New-MailboxExportRequest CMDLET.
Follow the steps given below in order to export the mailboxes into PST file
1. Open the Exchange Console and run:
New-ManagementRoleAssignment -Name "Import Export PST" -SecurityGroup "Organization Management" -Role “Mailbox Import Export"
This will generate a new role group called Import Export PST to the Oranization Management group with the role Mailbox Import Export.
You should Close and Restart the Exchange Management System again so that the changes made will get reflected in the settings, otherwise you will still get the same erroriIf not
restarted. Now move to the next steps.
2. Assign “Mailbox Import Export” role to it.
3. Add Desired Users to Role Group
4. Create Network Share ( Exchange Trusted Subsystem group has read/write permission to NTFS Permissions)
5. Run PS New-MailboxExportRequest
6. Monitor New-MailboxExportRequest
Verify PST File has been created on the network Share and you are done.
If you get the same error again, then there will be some hardware or software issues due to which you are not able to export mailboxes into PST files. In that case, you can make
use of any third party tool like Stellar Phoenix EDB To PST converter, which will help you to export your exchange database files to PST files easily and quickly. You can try this software by downloading its demo directly from their site http://www.stellarinfo.com/email-repair/edb-pst-converter.php

I have a new mac book pro which i use in england but I need to use German charachters frequently, is there a way of having both visable on the keyboard?

I have a new mac book pro which i use in england but I need to use German charachters frequently, is there a way of having both visable on the keyboard?
For example so that I can just press shift or another key to get the German character.

Some may already exist, but you will have to learn them. On my old system these can be found through keyviewer.app For example, if I press option+s I get ß Umlaut is a bit cumbersome as option+u then the actual letter. It may be possible to bind a key to do this function, possibly through System Preferences > Keyboard > Shortcuts
I have old, old references for utilities that let you rebind keys to other functions, and you would have to see if they have modern equivalents.
Ukelele Mac OS X Keyboard Layout Editor - http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele - mostly useful for character, not function mapping.
Check Butler, ikeys, quickeys or Spark

How to get access to my iCloud back up when setting up a new iPhone 5s which needs the newest version of iOS7 first?

how to get access to my iCloud back up when setting up a new iPhone 5s which needs the newest version of iOS7 first?

Set up the new phone as a new iPhone (without using your backup), then update it to the latest iOS (7.1.2). Then go to Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens again and when given the option, choose Restore from iCloud Backup and follow the prompts. This process is explained in more detail here: iCloud: Restore your iOS device from iCloud.

Removing mailbox (Remove-Mailbox) right after mail export to PST request (New-MailboxExportRequest)

Hi all,
I have a PowerShell script for archiving employee mailboxes after they leave the company. The script uses WinRM to connect to Exchange CAS where it:
exports user mailbox to PST files (New-MailboxExportRequest -Mailbox $user -FilePath $USER_ARCH\mail\MAIL_$user.pst)
export user archive mailbox to PST file (New-MailboxExportRequest -Mailbox $user -isarchive -FilePath $USER_ARCH\mail\Archive_$user.ps)
delete user mailbox (Remove-Mailbox $user
These 3 steps are executed one after another. Since New-MailboxExportRequest is asynchronous (only creates requests and exists), the
Remove-Mailbox is triggered right after the request is submitted. Since PST file is not created or is truncated, I believe
Remove-Mailbox actually removes mailbox even though there is active request for that mailbox. Logically the mailbox with bound active requests should not be removed and there should be warning.
I know there are many possible workarounds. Just want to know if this is by design or am I missing an option to above commands?
Best regards,
Blaz

The same happens in Exchange 2010 making this seem like it is by design. I can find no reference as to how to avoid this other than by changing your script.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I had bought iphone 4 from singapore and now i am relocated to india.....there is some hardware problem in the phone due to which i m nt able to use it.....how do i give the phone for repair and in which country?

i had bought iphone 4 from singapore and now i am relocated to india.....there is some hardware problem in the phone due to which i m nt able to use it.....how do i give the phone for repair and in which country?

The warranty is not international and only available in the Country of purchase .If the iPhone is out of warranty Apple or their Agents will also only give service in the country of original purchase.
So if you want Apple help you will have to return it to Singapore or find a 3rd party to repair it if they can in India as long as it is out of warranty and you understand that Apple would never help with that device in future if it has been opened by a 3rd party

Hello, I've installed Lion but now it says I can't use the Cloud as I need the Apple ID Password to use Back to My Mac. I've obtained several new Apple ID passwords which work ok on my phone but doesn't seem to be the password it's looking for?

Hello, I've installed Lion but now it says I can't use the Cloud as I need the Apple ID Password to use Back to My Mac. I've obtained several new Apple ID passwords which work ok on my phone but doesn't seem to be the password it's looking for.Does anyone know what's needed please ??

It's probably looking for the Apple ID & Password you used to purchase Lion, or ML as the case may be.
Thse are the Mountain Lion forums, is that what you meant?

I have a new ipad which needs itunes 10.7 or later to download my music onto it... but my ipad is not compatible with this as it is too old... can i use itunes with this ipad and apple laptop?

I have a new ipad which needs itunes 10.7 or later to download my music onto it... but my apple laptop is not compatible with this as it is too old... can i use itunes with this ipad and apple laptop?

To use itunes 10.7 you need to have Snow Leopard operating system installed
These are the system requirements
System Requirements:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
If you can run Snow Leopard you need to purchase it
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Ok. I hope someone can answer my question. I am new to photoshop. I need version cs4 in order to work with a designer and printer on some logo work. I've tried to download it but it just gives me individual files with no installer and nothing - includi

ok. I hope someone can answer my question. I am new to photoshop. I need version cs4 in order to work with a designer and printer on some logo work. I've tried to download it but it just gives me individual files with no installer and nothing - including the adobe "instructions" seems to work. How can i get this software in a downloadable format? is it actually free - I'm assuming it is... Hope someone knows the answer to these questions...

The download itself is free and is valid for 30 days only. After that, the software ceases to work.
CS4 is pretty old, no longer sold and no longer supported by Adobe. It's also not compatible with many modern OSes.
Why do you have to work with such an obsolete version of Photoshop?
What kind of "designer" uses it?

I downloaded ios 6 on my iphone. Now I need to download the new version of itunes, which requires the new OS. In order to download the new OS i need to have the app store, which comes with the new OS

I downloaded ios6 on my iphone 4s. Now, to sync to itunes I need the new version of itunes. In order to download the new version of itunes, I need a newer OS. I am fine with downloading a new OS, but it says to download through the app store. My computer doesn;t currently have the app store. What should I do?

In order to get the App Store you must be running OS X Snow Leopard 10.6.8
To get there you must upgrade to Snow Leopard 10.6 which requires an install DVD
You can call Apple and ask them for the install DVD. It will cost $19.95 plus shipping
Once you have upgraded your Mac to Snow Leopard then you need to update it to 10.6.8
Then you will have the App Store you need
Backup first before you start any of the upgrade
Allan

HT1483 My ipod needed repairing, so I backed up the data into restore file. My ipod was swapped for a totally new ipod and now I am having difficulty reloading the restored data that I saved. I keep getting the corrupt or not compatible MSG??? Any Ideas

My IPOD needed repairing, so I backed up my personal data into a restore file. In the end my ipod was exchanged for a brand new one and now I am having difficulty with restoring all of my data that I saved.
While trying to restore through iTunes I keep gettingthe corrupt or not compatible error message. Does anyone have any ideas or experience with this issue?
Much Appreciated for any help!

You can not restorea a backup made with a newer version of iOS to a phone with an older version of iOS.
1400 photos stored on the phone? Do you not EVER extract them? The camera roll is intended to be temporary storage. Like the SD card in a digital camera. You should be extracting them to your computer on a regular basis.
Contacts should be synced to a compatible contact manager or cloud service. If you were not doing any of these things, guard your backups with your life and make sure your computer is being backed up on a regular basis, because you won't be able to get them back until you get a new phone with at least the same version of iOS that your 4 had.
There are 3rd party applications that say they can extract this information from a backup file, but I don't have personal experience with them.

I need repair pst in my mail faster

I try to import pst file, but it says "invalid file format." File - .pst. Why I can't open file? I need repair pst in my mail faster.

Based on the error information, your PST file should be corrupt or damaged. You should first check the size of the PST file,
1. If PST file size is 0. Then your PST file does NOT contain any recoverable data. You should check the source of the PST file and make another copy, or obtain a backup from your backup media. If you cannot get another copy, then you can find
out the media where you have stored your PST file in the past, for example, an external USB drive, and try
DataNumen Outlook Drive Recovery to scan and recover the data from the drive directly.
2. If PST file size is not zero, then it is still possible that some data are existing in your PST file and you can recover them.
There are a lot of online resources discussing about how to recovering corrupt or damaged PST files.
First, the Microsoft offical tool scanpst, also called Inbox Repair Tool, can repair the PST file, you can refer the following articles:
http://office.microsoft.com/en-001/outlook-help/repair-outlook-data-files-pst-and-ost-HA010075831.aspx
http://support.microsoft.com/kb/272227
https://support.microsoft.com/kb/287497
Second, a lot of Outlook MVPs also discussing this topic on their own websites:
http://www.msoutlook.info/question/77
http://www.slipstick.com/problems/pst-repair/repair-a-damaged-personal-folders-pst-file/
Third, there are many third-party Outlook recovery tools you can try, below is a list of them:
http://www.datanumen.com/outlook-repair/compare.htm
Nearly all these tools provide a free trial so you can try first to see if a tool works before purchase it.
Good luck!

If my iphone 4s was unlocked by AT&T, but I need to use my warranty for a new iphone. Do I need to reunlock the new iphone? or will apple give me an unlocked iphone?

If my iphone 4s was unlocked by AT&T, but I need to use my warranty for a new iphone. Do I need to reunlock the new iphone? or will apple give me an unlocked iphone?

If your phone is officially unlocked, you will get an officially unlocked iPhone if yours is replaced under warranty. Apple maintains a data base of officially unlocked iPhones & can verify whether your phone is officially unlocked or not. To be safe, point this out to the genius bar, if you go to an Apple store or whoever you talk to, if dealing with AppleCare.

TS1713 I need to purchase a new Portable Power Adapter which has a barrel type connection. The one I have is not working.

I need to purchase a new portable power adapter which has a barrel connector. Can not locate a new power adapter on the web site. Went through the troubleshooting, it is definitely not charging. Any one have info on this?

You can buy from Apple. Or other vendors, such as Amazon.
Check the wattage - it is printed on the side of the charger. Do not buy a lower wattage.
Here's one. Note this is not an endorsement, only an example.
http://www.amazon.com/Replacement-Adapter-Charger-PowerBook-A1021/dp/B002V1AYQ6/ ref=sr_1_1?s=electronics&ie=UTF8&qid=1396539641&sr=1-1&keywords=mac+powerbook+ch arger

New-MailboxExportRequest gives PSTs which need repairing

Similar Messages

Maybe you are looking for