New namespace for custom alert types

Just fyi, so far, when creating custom alert types and generating the necessary DB tables containing alert data, the tables could only be assigned to standard SAP packages due to name space checks running at table generation. However, it is desireable to generate the tables of customer-relevant alert types into customer packages. A note was created to make this possible. If you create custom alert types, please check OSS Note 1519907 for further information.

your query looks perfectly fine. Are you sure if the alerts you see in the console are of the 'Resolution State =0' (New). It might be the case where the alert have moved to a fidderent resolution state.
Also, take a sample warming alert from console, query for the same in DB and check the Severity value. If it is '2'.
Regards,
Saravanan

Similar Messages

Customer alert Types creation

We just upgraded our system to SCM 7 and in SPRO i am not able to find, where i need to create custom alert types.
Any help is appreciated.
thx
Jeff

Hi Jeff,
in SPRO, you define the alert types under SCM Basis > Alert Monitor > Maintain database / dynamic alert types for DP and SNP
or
once you launch transaction /SAPAPO/AMON1, go to Alert Profile, then from the top menu Environment > Maintain Alert Types for DP/SNP. You need to enter new alerts with ID greater or equal than 8000.
Regards,

How to use custom aspx page as template for custom content type

Hi,
I have created custom content type and custom aspx page. I want to use aspx page as template for custom content type.
Can anybody please let me know how to accomplish this?
Any help would be appreciated.
Thank you,
AA.

Check if you are looking for the below
http://www.sharepointpals.com/post/How-to-Create-a-Page-Layout-(PageLayout)-with-ContentType-in-SharePoint-2013
Please remember to click 'Mark as Answer' on the answer if it helps you

New Requirement for my Output type?

Hi.
I want to create a new requirement for my output type.
Please guide me how shall I do it?
thanks

You can trigger the output type by creating a condition record.
Go to transaction VV21, enter the output type, click on Key combination, if ther's a radiobutto for shipping point only, select it and create a condition.
If ther's no radio button for shipping point, add table 024 to the access sequence assigned to the output type in NACE.
After modifying the access seq. go back to VV21 and create a condition.
You can create condition records in NACE also.
Regards
Sridhar

SQL query for custom alert view

I have created a custom alert view and scoped to show alerts related to group of servers.
Alert view Criteria: Resolution State - New, Severity - Warning and Critical, Group - "Group 1"
I am trying to query the Operations Manager database to show the alerts with same criteria using below query.
select MonitoringObjectName, ResolutionState, Priority, Severity, TimeRaised, TimeAdded, TimeResolved, AlertStringName, AlertStringDescription from AlertView where ResolutionState = '0' AND (Severity = '2' or Severity = '1')
AND
MonitoringObjectId IN (select TargetObjectId from RelationshipGenericView
where SourceObjectDisplayName = 'Group 1')
in Console i see both warning and critical alerts where as in SQL query output i see only critical alerts. Could you please correct if I am using wrong query. also please share your suggessions if i am completely wrong on this.
Kind Regards,
Bommi
~Bommi

your query looks perfectly fine. Are you sure if the alerts you see in the console are of the 'Resolution State =0' (New). It might be the case where the alert have moved to a fidderent resolution state.
Also, take a sample warming alert from console, query for the same in DB and check the Severity value. If it is '2'.
Regards,
Saravanan

Problem to create change pointer for custom message type - Idoc creation

Hi,
We want to create IDOC and send it out when the data of "planning calendar" changes. So we are trying to generate change pointers whenever entries in Table T439I (Planniing calendar) data change.
We created a message type, activated change pointers generally and maintained change relevant fields for message type (not sure if this step is done correctly). But not getting any change pointer in table BDCP2 when I create a new planning calendar in MD25.
Can anybody help / guide?

Thanks once again,
I had linked idoc type and message type in we82. Now after i activate the change pointers. I try to generate the IDOC type using BD21. It gives me the error message :<b> "Message type ZP2PPROJ_MSG cannot be sent with change pointers"</b>
whereas in my segments i am using all the master data only (i.e. PRPS, PROJ,PRHI). Please throw some light on this.
Also please clarify, do i need to make an entry of this custome message type in the partner profile ?
Rgds
kewal.

Distribution model. Create filters for custom message type.

Hello,
I have created a model view, and added a new message type (copy of HRMD_A). I want to add filters, but the system does not allow it. Do you know if I can only add filters to a standard message type, and not to a custom one?
Thank you,
Elena.

Thanks for your answer, but I think I didn't explain my question well.
I have created a message type ZHRMD_A, and a basic type ZHRMD_A07 (both copies of HRMD_A and HRMD_A07)
I am creating the distribution model, in transaction BD64.
I created the model view.
I inserted my messsage type.
Now I want to add filters to the message type in the distribution model. When I add a standard message type, I can see under the message type the text 'No filter set'. Then I double click this text, and I can add filters. When I add the custom message type, I don't see this text, and I have no option to add filters. That's why I think I cannot add filters to a custom message type.

Generic Object Services for Custom Object Type

I would like some advice please. I am not an ABAP Developer but I would like to enable the generic object services for transaction PP01 for a custom object type.
I have searched for information, which suggests that the object needs to be published using the function module SWU_OBJECT_PUBLISH so that it is available in the Business Object Repository. If this is correct, please could someone tell me (in simple terms) how I can do this (with the assistance of an ABAP developer)?
My colleague did some debugging which seemed to suggest that in order for the generic object services to be available, the field OBJTYP needs to be populated in table T778O. Is this correct? If so, how should this be done?
Your advice would be greatly appreciated.
Regards
Corinne

Hi,
i'm also looking for the solution you have asked for.
if you know how to do it please reply me with the solution.
Thanks,
suresh

How can I include multiple limits in the sequence file documentation for custom step type?

Hi,
I have a custom Step Type that contains Measurements property under Results. Its type is Array of NI_LimitMeasurement.
I would like to see the values in the sequence file documentation like NI_MultipleNumericLimitTest type.
Is there any trick to do that?
Thanks,
Andras

Hi Andras,
I have made a slight change to the sequencefile 'docgen_txt.seq'.
In the Sequence 'Step Doc' is a section which handles MultipleNumericLimit step type. There is a precondition check on the step 'Add Multiple Numeric Limits' if the step is of type 'NI_MultipleNumericLimit'. As your step type is based on the MultipleNumeric Limit type, I have just removed this precondition and just relied on the existence of Parameters.Step.Result.Measurement. Equally you could add a new section in this sequence to handle your Custom Step Type which is only called when the precodition match your type name.
Now when you run the DocGen tool it handles your custom step type.
Find attached my modified sequencefile 'docgen_txt.seq'.
Just copy the contents of '..\National Instruments\TestStand 3.5\Components\NI\Tools\DocGen' to the User folder. Then place the attached file in the User\Tools\DocGen overwritting the version that is in that folder.
Then launch TestStand and try it out on your sequence file.
If you are using the html version, then you will have to make the same change into Step Doc sequence of the docgen_html sequence file.
Hope this helps
Regards
Ray Farmer
Message Edited by Ray Farmer on 05-19-2007 05:28 PM
Regards
Ray Farmer
Attachments:
docgen_txt.seq ‏184 KB

Authorization for custom trans.type in crm_dno_monitor

Hi
In ChaRM , i have created custom transaction type ZDCR, i have added the transaction to the authorization object CRM_ORD_PR for change manager role for create ,change & display . as when i open the crm_order ,i could able to create the custom transcation type , but when i am execute the transaction type in crm_dno_monitor , no thing is selected , but when i check the same in the full authoraztion user it is getting selected , i don't know where to maintain the custom transaction type for getting selected via t-code CRM_DNO_MONITOR .
Regards
Arumugam

- First you display the ZDCR list from Tx CRM_DNO_MONITOR with a user with limited authorizations
--> Messages are not displayed
- Then you do the same (tell me if i'm wrong it was not clear on your screenshots, i'm not sure whether messages on the last screenshot are SDCR or ZDCR) with another user with full authorization.
Did you create a BP for your first user ?
I recommend that you try again with your first user with SAP_ALL profile and tell me if it works. If not we'll have ruled out one cause of error.
Stéphane.

FM to create support message for custom process type other than 'SLFN'

Hi All
Is there any function module or BAPI which will create support message for the custom process type other than SLFN.
BAPI_NOTIFICATION_CREATE is posting only for the process type 'SLFN'
Thanks in advance
Regards
Ravi

Any ideas?

Put the report into shape for custom step type

Hi All,
I created a custom step type and also managed to get the results logged into the report file.
In the report file(See ‘[15 33 14][22 10 2007].xml.vi’ please remove the 'vi' extension) the 'StepResult' (created by my custom step type) appears just below the status. Is it possible to get it displayed somehow the cell(measurement column) next to it, like in a Numeric Limit Step? I’m using the ‘horizontal.xsl’ stylesheet and Teststand 3.5.
Furthermore, is it possible to change the name of the column headers? Or the structure of the header?
Cheers
Attila
Attachments:
[15 33 14][22 10 2007].xml.vi ‏17 KB

Hi again Attila,
Further to my above post, I've collaborated with colleagues here and have been able to modify the horizontal.xls stylesheet such that it is suitable for what you require. This modification will ensure that all properties named StepResult will be displayed as you described, in line in the table.
To ensure compatibility with your results in TestStand, a small modification to your sequence file is required. In your sequence file, right click the value for your custom step, go to Advanced > Edit Flags and uncheck all boxes. The text in the bottom of the window should now read "0x0". This should mean that your data is displayed correctly.
I am attaching the modified horizontal.xls for you to use [remove the .vi extension]; please make sure a backup is created before you replace it. The file should be placed in your TestStand directory under Components\NI\Models\TestStandModels\StyleSheets. Modifications to column headers as described in the above post can be made to this file.
I hope this soultion is satisfactory and that you are able to implement it. If you have any further questions please don't hesitate to reply.
Regards,
Tom
Applications Engineering, NI UK
Attachments:
horizontal.xsl.vi ‏84 KB

Assigning filter criteria for custom message type.

Hi everyone,
In our requirement i have created a custom message type ZDEBMAS like debmas. now while creating a distribution model with this message type, i need to create a filter for this.
only IDOCs of customers with Account group 0001, 0002 and 0012 has to be triggered. I'm able to create the filter with message type DEBMAS, but while i'm using message type ZDEBMAS i'm unable to create any filter. Can any help me in this.
thanks in advance,
Rajni

Hi!
Do you create filter with BD95 and allocation with BD59 transactions?

Change pointer for custom message type

Hi,
I have a situation where in, i need to create a custom message type and need to track the changes in the table fields using the Change pointer technique.
Can anybody guide me as to what are the step to be followed after i create the custom message type and how to register the fields of the message type ?
Note : Change document (CDPOS) technique is ruled out in my requirement.
Regards,
Kewal.

Thanks once again,
I had linked idoc type and message type in we82. Now after i activate the change pointers. I try to generate the IDOC type using BD21. It gives me the error message :<b> "Message type ZP2PPROJ_MSG cannot be sent with change pointers"</b>
whereas in my segments i am using all the master data only (i.e. PRPS, PROJ,PRHI). Please throw some light on this.
Also please clarify, do i need to make an entry of this custome message type in the partner profile ?
Rgds
kewal.

When do we ceate custom messagae type apart for custom idocs type

Hi all.
Can u pls let me know when do we create custom message type in ALE/IDOCS. what I know is we can create a custom message when we create custom idoc type & when we have reduced idoc type.Pls let me what are other cases in which I need to create a custom message type.Thanks in advance.
Kind regards,
sami.

I think these are the only cases where we need to create. Its basically when we dont have standard SAP message type available.

New namespace for custom alert types

Similar Messages

Maybe you are looking for