New osx mavericks doesn't see my sd card

Hi All
I downloaded the new OS X Mavericks and I want to download a tune from Itunes onto my sd card .
when I load the card into the computer it always showed on my desktop.  but not now?
When i go to remove it a little box pops on screen warning me that the sd card hasnt been properly adjected.
But how do I find it on my desktop to start with?
Thanks
Tricia

I have already used this sd card on my imac, it's not a new card.
The only thing thats changed is I downloaded the new maverick.
Obviously it's having a hissy fit and doesnt like it!!!
I dont really want to lose all the info and photo's etc if I can avoid it. but, if there is no other way, that's what i'll have to do.
Alternatively I'll buy a new card and start again.
Thank you very much for your help. I much appreciate it .
Tricia

Similar Messages

  • I'm trying to download the new OSX Maverick.  It is asking for and administrator password.  I have a common password that I use for all apple interfaces.  It doesn't work here.  What to do?

    New to the community!  I'm having problems downloading the new OSX Maverick.  I come to last step and the system asks for the Administrator password.
    I have not set one up separately from my Apple ID password.  What can I do?

    Reset the password first.
    OS X 10.7 Lion, 10.8 MountainLion & 10.9 Mavericks
    Reset Password using Recovery HD
    Boot into Recovery Partition.
    Start the computer,then press and hold down command and R keys to start into recovery partition.
    When you see the Apple logo, release the keys.
    Wait until  OS X Utilities window shows up.
    Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
    from the drop down.
    Terminal window will appear.
    Type in   resetpassword   and press enter on the keyboard.
    Leave the Terminal window open.
    Reset Password Utility window will open with Macintosh HD selected.
    Select the user account from the popup menu box.
    Enter a new password.
    Reenter the new password for the user.
    Enter a hint.
    Click the "Save" button.
    Click  in the menubar and select Restart.
    Log in.
    If Keychain dialog box appears, select “Create New Keychain”.

  • I downloaded the new osx mavericks system, and it would not recognize my external monitor.  I have a macbook pro.

    Any ideas on how to get my new osx mavericks that i just downloaded to recognize my external monitor?

    Hello maggiefromloudon,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Best of luck,
    Mario

  • Anyone using FCP 7 with the new OSX Mavericks?

    Has anyone updated to the new OSX Mavericks and is using FCP 7 without problems? Any plugin malfunctioning?

    Nevermind I fixed it. Atleast I think I did, I just set my audio to 24-bit and 9600khz or whatever its called and it sounds clear now. At least I hope that fixed the problem.

  • I downloaded the new OSX mavericks in my macbook and why I don't have the new i-life and iWork

    I downloaded the new OSX mavericks in my macbook and why I don't have the new i-life and iWork

    Have you checked the Software update page at the App Store?
    And do you have iLife '11 and iWorks '09 installed? Only these versions are eligible to be updated to the new versions.

  • Hi, I am running Mac OS X 10.5.8 (9L31a) Mac Pro. Can I upgrade to enable the new OSX maverick software?

    I am unsure about upgrading the OSX 10.5.8 (9L31a) software on my mac pro (2006-7) model. Would or could I upgrade to snow leopard to enable the new OSX Maverick to work on my unit.
    Thank you.

    A 2007 Mac Pro isn't capable of running Mavericks. The newest OS it can run is Lion 10.7.5; installing it requires going through Snow Leopard or finding a Mac OS X 10.7 install thumbdrive.
    (96480)

  • How will the new OSX Mavericks affect applications already installed and using Mountain Lion?

    How will the new OSX Mavericks affect applications already installed and using Mountain Lion?

    If you're asking about compatibility, that would be something you would need to ask of the app developers, though most apps compatible with Mountain Lion should be compatible with Mavericks. You can also consult the tables here:
    http://roaringapps.com/apps
    though that information comes from user reports and so should not be considered authoritative.
    If you're asking whether installing Mavericks will delete your apps, no, it won't, though a good backup is always highly recommended.
    Regards.

  • Airplay (ios7, osx mavericks) doesn't show up by using my airport express (6.2.3)?

    Why does Airplay (ios7, osx mavericks) doesn't show up by using my airport express (6.2.3)?

    Hi tease.ch!
    Here is an article for you that will help you troubleshoot this issue with your ability to AirPlay:
    iOS: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • New Retina MBP Doesn't See Time Capsule

    Just purchased a new retina MBP and have 2 probems with it.
    1.  It doesn't see my Time Capsule, when using Airport Utility it states that 'no configured airport base stations have been found'.  I also have an iMac which sees the TC ok.
    2.  I did a superduper backup of my old MBP but set up the new MBP as a new machine just importing the applications from the backup using Migration assistant.  Because of the problem in item 1 above I tried to start up using the external backup but failed. The new MBP cannot startup on the backup disk (Freeagent GoFlex 1TB) even though it's shown as an optional startup in the settings.  When trying to startup from it the machine just goes to a black screen and does nothing.
    So far, not too impressed.
    Regards

    1. Yesterday my mbp-r was unable to find my AP extreme base station in Airport Utility, even though the network seemed to be functioning perfectly. Rebooted the mbp-r (not painful given the speed), and now all is well with Airport Utility. Mysterious, but it worked.
    2. Does superduper clone the recovery partition? (I think I read somewhere it doesn't.) And if not, can you boot from such a clone? IIRC, Carbon Copy Cloner can produce a recovery partition.

  • Having problems with InDesign6 and the new OSX Mavericks

    I just downloaded the new OSX and now my Id6 won't open. It starts initializing and the I get the message "InDesign quit unexpectedly." I am in the middle of publishing a book for someone using the "export to kindle" plug-in which isn't compatible with IdCC. Has anyone else had this problem?

    I have just run into the same issue. New Macbook Pro running Maverick and I have Vectorworks 2011. Appple support recommends against partitioning the hard drive on a new MacBook Pro running Maverick. (The first call the apple person suggested it. On a follow up call they strongly recommend against doing it because it can screw up the firmware.) How did doing the downgrade work for you, and how did you do it, external drive, partition? I hate to drop $1300 on Vectorworks when I don't yet need it.

  • Why does it require me to input my credit card just to download a free app? The app is the new OSX Mavericks

    Its says that I must enter my credit card number in order to download a free app (OSX Mavericks). Why is this?

    You can select, "None" > Mac App Store: Changing your account information

  • I have an iMac5, 1 with dual core of 2 x 512 MB. Can I add memory to the original computer to take advantage of the new OSX Mavericks download?

    I have an iMac5, 1, with a dual core of 2 X 512 MB RAM. Can I add memory to my original computer in order to take advantage of the recent OSX Mavericks download?

    You can:
    Maximum Memory
    3.0 GB (4.0 GB can be installed, only 3.0 GB will be addressed)
    Memory Slots
    2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
    You will need to replace the modules you now have with one 2 and one 1 GB module or two 2 GB modules.
    You cannot install anything higher than 10.75 Lion as your model is not able to run anything higher.
    Upgrading from Snow Leopard to Lion or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
    If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Be sure to check whether any of your applications will have to be upgraded or replaced..
    App Compatibility Table - RoaringApps

  • New iTunes Library doesn't see .aif file

    I gathered my music into one new library on a new external HD but it didn't gather in the .aif file I made as an audio track for a movie. I can see it and click on it but it comes up with a QuickTime player window. If I play it, the track plays but doesn't get added to my new library. On the other hand, if I open iTunes from the old library (which I thankfully kept) it shows up and plays through iTunes. Since I need to occasionally burn this file to CD I would really like to have it with the rest of my music. So? What's going on? This track was created using Audacity if that matters.

    I don't know what "gathering" involves. Have you tried simply dragging the file to an iTunes playlist to add it?

  • New user created doesn't see any data in reports

    Hello Everyone,
    I am using Hyperion Planning 11.1.2.1. I have a problem when i created a new user in the system via Shared Services. The reports are Reporting and Analysis reports.
    I duplicated a current user in the system and applied the same groups and provisions. However, the new user cannot view any data in the reports. The current user however is able to do so. I am quite literally puzzled.
    The existing user has been given the "Planner" provision. Further, the existing user has dimension security applied as well. This works fine with the existing user, as when i log in as the existing user, the data is available only to the groups and dimensions he has been assigned to. But when I apply the same groups and provisions to the newly created user, I get absolutely no data though i can see the report.
    But if I apply the Essbase Cluster: Administrator provision to the new user, all the data is viewable in the reports irrespective of the dimension security.
    I would appreciate some help urgently to get this matter resolved.
    Regards

    Hi John,
    Though the problem was solved last time, it returned. Users aren't able to view any web analysis reports.
    I dropped all users from SS and deleted all the security filters from EAS. (made a backup of course). Then I created all the users once again with relevant access to groups and the provision of "Planner" in the relevant planning application.
    Then in planning (Administration > Manage Security Filters > UserName > Create) created the filter for the user.
    When I did that, the default filter for the user was as follows.
    Access - None
    Member - @IDES("Accounts"),@IDES("Scenarios"),@IDES("Versions"),@IDES("ABCGroup")
    I want the user to have access to the Cost Center (Branch) L103. So I added the following.
    Access - Read
    Member - "Final","Draft 1","L103","Budget","Actual","Final Forecast",@IDES("Input Assumptions"),@IDES("Balance Sheet"), @IDES("Profit and Loss Account"),@IDES("Financials Ratio"),@IDES("Report Assumptions")
    This used to work, but for somewhat reason, it doesn't. The story is the same for all users. When i log in as a user and try to view a report, i get the "Database Login" - No data available error.
    Pls help.

  • I have a MAC that runs Snow Leopard 10.6.8.  The new OSX Mavericks is free for download and I was thinking about upgrading.  Will my Creative Suite 4 (Photoshop, Illustrator, Acrobat, InDesign) work with OSX Mavericks?

    Was hoping to keep my Creative Suite 4 just a little longer.  Will it be possible with Mavericks?

    Uh uh, I see!
    Also it seems I can use my time machine backup:
    http://en.wikipedia.org/wiki/Migration_Assistant_(Apple)
    together with Migration Assistant. This would work. Thanks
    Now I need to figure out the Windows part. I need a full backup of Windows as well, with all the programs. In particular I need to be sure I can maintain the graphic card drivers.
    You don't want to know how long took for me to find out how the **** I could update my graphic card drivers in Windows on my Macbook pro. Unfortunately there was a lot of misleading propaganda from Apple about bootcamp, saying that the new intel processor would have worked fine with Windows. Sad that everything was a lie. When installing Windows with bootcamp the graphic card program was unable to find and install the graphic card drivers update . Took me 2 weeks reading through thousands of angry posts of disappointed costumers to find out how to do that. I do not want to reapeat this dreadful experience.
    After one year and a half with my Macbook pro I have a system I am TERRIFIED to touch. It is very very fragile, and any little change can destroy everything. It barely works. that's why I am so scared to re-install the OS

Maybe you are looking for

  • OUTPUT as FAZ

    Hi All, Can anyone tell what is the configuration to be done to send output as fax. Is it possible to send output as fax to corresponding warehouse number. If yes kindly tell me where we maintain FAX # for warehouse Points will be rewarded for suitab

  • Problems in accessing Essbase cube using Interactive Reporting studio

    Hi All, I have developed a report in Interactive studio for which Essbase is the source. When i try to process my query i am getting the below error "Request [Report] from user[username] was terminated since it exceeded the time limit" Any idea as to

  • Simple Design Analysis Question before designing dimensions and facts

    Hi I have a simple question ... (I think its simple) Suppose that i have the following staging table with the following columns: Student_Name | RollNo | Test_Date | Subject-Taken with data such as Kevin |123|12-4-2010|Physics now suppose that I want

  • DMS Storage - SAP DB Upper Limit

    Hi, My customer is interested in knowing the safe upper limit upto which size documents can be safely uploaded in SAP DB.Eg: upto 200 GB etc(assuming std R/3 implementation) or is it that we keeping expanding the hard disk size

  • Verizon's Poor Business Practices

    Remove This is the beginning of a media blast and campaign to inform the public of how shabbily Verizon has deliberately treated one of their customers.  My daughter had service with them, and Verizon allowed a third party to order a phone on her acc