New partner functions for datasource 0CRM_SRV_IBASE_ATTR

Hello,
in note 874267 is described how to implemention new partner function in datasource 0CRM_SRV_IBASE_ATTR. But i doesnt know how get the structure iba_partner in the badi. Is there are function modul simulare like CRM_BADI_GET_BDOC.
Regards
Sven Sende

Hi Pramod,
SMQ1 will only show an entry, when there are available data for the delta queue, i.e. someone has made a change or added new data.So checking RSA7 and SMQ1 will give the same result, if RSA7 shows more than 0 entries.
The problem may be the init. What init did you do: an init with data, or an init without data, or an init with a filter. Experience with our CRM system tells me, best way to initialize any CRM data is to do a full data init (without filter) or a init without data (without filter). I wonder about the FULL load you mentioned ? When did you do it ?
Kind regards,
Jürgen

Similar Messages

Creation of new partner function for VENDOR

Hi,
I've a requirement to create some Partner functions for vendors while creation of vendor. Some Partner functions are available by default and some we need to add. but while doing a BDC we are not able to find how many of them are available or where to put the new Partner function?
Please let me know, if there is any BAPI availble..
Regards,
Anupam

Try below LSMW batch input method its very esay to upload data
Object               0040   Vendor master
Method               0001   Standard
Program Name         RFBIKR00
Program Type         B   Batch Input

A new partner function is been defined for a particular customer in r/3?

Hi All,
There is a new partner functions been defined for a customer apart from soldto,shipto,payer,billtoparty partner functions.
The new partner functions is Sales head.
And how to i bring the sales head information from the customer master from r/3 to bw?
Do i need to create a new zobject nor enhance the customer master ? nor simply create an sales head object in bw and define the characteristics as Reference characteristics??
pls help me !!
Thanks
Pooja

Hi,
You should enhance the standard Data source 0customer_attr with that additional partner function (sales head) as per the proper logic and replicate the same . if it is 3.5 that same object( related to that field length and data type) same object can be added as attribute at info object level and do the transfer rules and activate that and try to the load.
Thanks & Regards,
Sathish

Multiple Partner Functions for a Sales document Item

Hi,
Can you please advise on modeling scenario for showing multiple partner functions for a given sales document in BI Report ..
Because Key figure values should not be distributed for multiple records just becos of multiple partner functions but users want to see them in the reports along with sales doc and key figure
I am explaining bit more clearly...
I can achieve above requirement by having below model ..
SDOC ITEM PF1 PF2 PF3 AMOUNT
1000 10 AB CD EF 50000
PF : Partner Function
but as I feel it is a complicated task to add more and more columns fro partner functions as and when new partner functions have been added or requested to show by users at sales doc level...
So Can you please advise a better solution to meet the same requirement.
Thanks & Regards,
BRK
Please advise me on this scenario
Thanks & Regards,
BRK
Edited by: BRK on Jul 22, 2008 9:19 AM
Edited by: BRK on Jul 22, 2008 9:29 AM

SalesDoc______Item_______PartnerFunction________Amount
80000_________10_____________A1_______________$1000
80000_________10_____________A2_______________$1000
80000_________10_____________A3_______________$1000
This will be the normal display in the cube if there is only one Partner Function.
But what we need is
SalesDoc______Item_______PartnerFunction________Amount
80000_________10_____________A1_______________$1000
80000_________10_____________A2_________________' '
80000_________10_____________A3_________________' '
The Amount (KF) should be populated only for the first record for a SalesDoc / Item combo.
You load data from source to the ODS, say delta.
Suppose that the below record is already available in the ODS.
SalesDoc______Item_______PartnerFunction________Amount
80000_________10_____________A1_______________$1000
And you get the following data as DELTA in the Data_Package from the source.
SalesDoc______Item_______PartnerFunction________Amount
80000_________10_____________A2_______________$1000
80000_________10_____________A3_______________$1000
If you populate the Amount again for these 2 records, then the total would sum to $3000, which is wrong.
So what we do is,
Write a Select stmt for ALL ENTRIES in Data_Package and fetch the records from the target ODS. Have it in an Internal table, say t_ODS1
Take the SalesDoc / Item from the Data_Package and chk if it is present in the internal table t_ODS1.
If it is present, then populate the Amount as ' ' (Blank)
Else populate the Amount as $1000.
Say, you are getting 3 new records, which is not present in the ODS1.
In that case, your internal table t_ODS1 will be blank.
Now again, we need to populate the Amount only for the first record among the 3 records.
So, here comes the "Flag".
Set the Flag as X, when we populate the Amount.
Everytime chk the Flag <> X.
Only if it is <> X, populate the Amount.
Else Leave it Balnk.
Hope I have explained in detail
Regards,
Balaji V

Can we create new partner types for quallity notifications in SAP system?

Can we create new partner types for quallity notifications in SAP system?
The business requirement is to limit the available entries for partners displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
Would appreciate help in resolving this.
Thanks,
Nilesh

I know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
Then you can assign the procedure to the notification type.
This customisation setting does not solve the problem I have.
I'm looking for the partner type creation process which we assign to the partner function.
Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM

Partner Function for Vendor

Hi Friends,
I have requirement in partner function, when I configured a new partner function ZH and create vendor it auto picks up the this PF and same vendor number... but my requirement is number needs to blank and it should not be mandatory.. is it possible to achive this
Thanks in adv
Bhargava

Hi
I require typically like this by default
PF          Name              Number        name
VN         Vendor              12546           xxxx
OA         ordering add     12546        xxxx
ZH         Head office       ______
here for ZH number needs to blank but system expects if some thing is there in the PF then corresponding entry needs to be there in the number column.
How to achive this
With regards
Bhargava
Edited by: Bhargava ms on Mar 12, 2008 2:29 PM

How to define a new partner function?

Dear experts!
Thank you for your attention!
we are using ECC6.0, I just want to ask how we can define or create a new partner function?
Best regard!
Tangdark

Hi
Tang
Use Tcode VOPA
Partner function
Specify an alphanumeric key which can have up to 2 characters and a description for a partner function.
Partner type
The partner type is an indicator which informs you of the type of partner, for example, partner type customer "KU".
Currently, you cannot change the partner types in customizing. You canonly select the partner types that are included in the standard SAP R/3 System.
Error group
Using the error group, you assign an incompletion procedure to a partner function (see section "Incompletion log").
Higher-level function
For a partner function, you can specify the higher-level partner
function. In this way, you can portray an existing dependency between the partner functions.
Unique in customer master record
If you characterize a partner function as unique, you can specify it only once in the customer master record.
The sold-to party has to be unique in the customer master record whereas you may specify several contact persons.
Customer hierarchy type
In this field you can specify whether a partner function can be used for a customer hierarchy. Enter the customer hierarchy type permitted
for the partner function. Refer to the section "Define hierarchy types
and assign to account groups".
Convert functions
If you work with several languages in the sales and distribution
system, you can carry out a language-dependent function conversion.
This means you can display the internal key definition, for example, AG, WE, and so on, differently on the screen depending on the logon language of the user. For example, you can display the key CU as AG when logged on in German. (The conversion is necessary because the partner functions such as AG, WE are partially hardcoded in the programs.)
Thx.
Edited by: DWARKESH THAKKAR on Oct 28, 2008 7:16 AM

Adding a new partner function in va01 has to differ in item wise

Hi all
here by adding a new partner function by item level in va01
i hav a z partner table , that has some values , each values differ from item level
for eg : item 1 (posnr) 10 , has a new partner called buyers1
posnr 20 has buyers 2
what i am facing probs is , i cannot append into table xvbpa (using a program mv45afzz) & form save_docu_prepare.
xvbpa table item is not storing
partne rwill come default from the customization , but my partner will be add depends on item / material .
i have tested a scenario for eg . when i creating a orders , as soon as entered a dealer , the default parner will be setting , then i entered manually a new partner , then it is reflecting in a table with item
customization partner doesn't hve a item , where as while creating when i put manually it is reflecting in item level .
and 1 more things , when i try to append it also , its is reflecting to all item in orders
tel me how to refresh the new partner item wise , that also O.K

nO ANSWER FOR THE QUES. NEED TO RAISE MORE QUES. SO ONLY I AM CLOSING

Create, Update and Delete Partner functions for a Functional location.

Hello
I have a requirement where I need to
a. Create / Assign Partner functions to a Functional location,
b. Update the new Partners values ( PARNR ) for particular Partner Functions ( Replace new Partner values in place of old partner values )
c. Delete the Partner values and Partner functions for a Functional location.
when the above changes are done, the changes should be reflected in IFLO ( Table-IFLOT ) and IHPA ( Table-IHPA ) transactions .
I wanted to make the above changes by using FM's or BAPI. I have searched many forums and threads, but still I was not able to get the correct solution.
Can anyone help me out in finding BAPI or FM's to do the above changes. ?
Note : I will have an excel sheet which has coloumns like Functional location, Partner function, Old Partner value ( PARNR ) and New Partner value (PARNR ). This data needs to be updated in IFLO and IHPA.
Thanks and Regards,
Karthik Ganti.

Hello
I have a requirement where I need to
a. Create / Assign Partner functions to a Functional location,
b. Update the new Partners values ( PARNR ) for particular Partner Functions ( Replace new Partner values in place of old partner values )
c. Delete the Partner values and Partner functions for a Functional location.
when the above changes are done, the changes should be reflected in IFLO ( Table-IFLOT ) and IHPA ( Table-IHPA ) transactions .
I wanted to make the above changes by using FM's or BAPI. I have searched many forums and threads, but still I was not able to get the correct solution.
Can anyone help me out in finding BAPI or FM's to do the above changes. ?
Note : I will have an excel sheet which has coloumns like Functional location, Partner function, Old Partner value ( PARNR ) and New Partner value (PARNR ). This data needs to be updated in IFLO and IHPA.
Thanks and Regards,
Karthik Ganti.

Partner function for sales contract

Hi
I have to extract Sales related data from SAP R/3 to BW.
Facing issue if someone just changes partner function for Sales contract as they are not captured in any of the standard extractors.
If there is change in partner function for Sales order then it gets captured in 11 vascl but if its for contract then it doesnt get capture.
Any solution ?
Regards,
monika

Hi ! Ivy
I guess there is a option.
Try this out. Use the menu path IMG> Sales & Distribution> Sales> Lists> Set updating of partner index
In the resulting screen, click on 'New Entries' make entries 0 - for sales orders and 4 - for contracts as transaction group. Under the column 'partner function' ener the partner function for which you want the report and save your entries.
Now when you go for executing your report, click on the push button 'Partner functions' ( Say in VA05) , you will have the option for selecting the new partner functions , select and execute your report.
Provide your feedback.
Regards,
PATHIK

Error "You cannot enter a partner function for output NEU"

Hi Experts,
I'm having these error "You cannot enter a partner function for output NEU" (message VN041) when I tried to assign a partner function (e.g OA) in the conditions records for application "EV" (Purchase outline agreement). The system do not allow me to do this for any doc type (LP, LPA, MK, OA, etc). I'm using t-code NACE or MN08.
I want to assign partner for key combination "Document Type". The conditions is already there but with no value, so I want to assign partner function "OA" or "VR".
I already check all the configuration and looks fine. For example, define possible partner functions for output type "NEU" for application "EV" (Purc outline agree).
Hope you can help me to find the problem.
Thanks,
Mairo.

I have the error in NACE or using tcode MN08.
As soon I executed those transaction the system shows the condition records created for varios Doc Type (e.g LP, LPA, MK, etc) but with no partner function assigned. For example:
Doc. Type / Name                     /             Funct /   Partner     /            Medium / Date/time /   Language
LP        /       Scheduling Agreement     / blank / blank /                                          2      /          3   /              EN
LPA      /      Scheduling Agreement                              / blank    / blank   /                1        /       3         /        EN
For example, I try to assign function "OA" for Doc. Type "LP", choose value from quickpick. Then when I press enter, the system give me the error "You cannot enter a partner function for output NEU", message no. VN041. Do not allow me to continue, so I have to leave this field blank, with no change.
Thanks,

Partner functions for a specific customer not seen in XD03 but appears in XD02

Hello SAP Gurus,
I have a situation where a partner functions for a specific customer not seen in XD03 but appears in XD02, In XD03 only one partner function (Ship to) appears but in XD02 (Sold to, Ship to, Bill to and payer appears), from the customer master I can see that account group for this customer has been changes to Sold to (Z001) from Ship to (Z002).
I checked in settings for OB20 transaction for display customer centrally, it is in Display mode as required and not suprresed would like your inputs as to why this is happening and what can be done to fix this.
Thanks and Regards
Mohammed Roshan

Hi ROshan,
Open customer master in XD02 sales view and save it then check in XD03 it should display the partner functions.
As you said the account group has been changed I think the records needs to be saved again.

What is the need of creating partner functions for sales document type.

Hi SAP (SD-GURUS),
Actually we create partner functions before creating customer ex: sold to party, ship to party, bill to party, and payer.
These partner functions are going to be copied into sales order while processing sales order.
Again what is the need of creating partner functions for sales document type.
Thanks&Regards
sreenivas peruru

There are some Partners you could enter at Sales ORder Level. E.g. Sales Person, Employee Responsible, Forwarding Agent, Broker, etc.
Thus these partner Determination need to be carried out at Sales Order Level & not at Customer Master level.
So we have to configure partner Determination for various levels e.g. Customer Master, Sales Order, Delivery level etc...
Hope this helps...
THanks,
Jignesh Mehta

Classic Scenario PO has multiple OA Partner Functions for Vendor

Hi,
I have a 'design' issue. My R/3 Vendor has many OA Partner Functions for the different Branches they have and the PO needs to be Faxed to the OA Partner Function number, but the PO needs to be created against the VN Partner Function.
So, how do i do this in SRM? I was going to have a seperate Catalog link for each OA Partner function, but this is not creating the R/3 PO with VN Partner Function of the 'core' Vendor number.
Does anyone have any advice for this?
regards Adam
Using SRM 5.0 (Server 5.5) SP 8 and R/3 4.6C in Classic Scenario - my catalogs are external vendor.

Hi
Please see these links, which might help ->
Partner function missing in backend PO
Re: Error in transmission while PO cration
"Multiple" partner data at PO header
Partner functions in plan driven MM-SUS
Re: Partner function not found
Number range for business partner
Re: Problem with BP. Assignment: Business partner person to user not unique
Error in creation of Employee for Business Partner
Re: enter exactly one partner of type vendor
Re: Business partner as Vendor and Invoicing Party
Partner functions in EBP for extended Classic Scenario
Regards
- Atul

Settign partner function for vendor

Hi..
I am trying to configure partner function for a vendor who has different oredring adress,
Can anyone explain me the stpes / details of how to configure a Partner function for vendor so that when i give the partner function in PO the adress of the partner function should be displayed.
And secondly if i create different partner function where do i maintain the address for each partner function.
Suggestions will be rewarded..
Regards

Hi,
check this thread
Partner function
thanks
suresh

New partner functions for datasource 0CRM_SRV_IBASE_ATTR

Similar Messages

Maybe you are looking for