"New position" in standard HCM Transfer Process is empty

Hi Experts,
In the HCM standard  transfer process the 'Previous manager' selects an employee.Then he selects transfer process ,then he fills 'New Manager' & 'Transfer Reason' input field in the adode form.Finally he sends the adobe form to 'New Manager'.
The 'New manager' opens the adobe form & he should select a value for 'New Position' drop down field.
In our case the drop down field is empty.How to insert value in the drop down field ?
Regards,
Krishna Balaji T
Edited by: krishna balaji on Jan 29, 2009 7:40 AM
Edited by: krishna balaji on Jan 29, 2009 7:43 AM

Did u checked with ur abper
not sure

Similar Messages

  • Standard HCM & forms Process development using WD4A

    Hello All,
    We are planning to implement applications of Standard HCM & forms Process using WD4A same like standard create Position u2026etc. to avoid Adobe forms.
    Could you please share your advises, suggestions and approach to be followed. Best feasible solutions.
    To meet the same like standard solution what are the precaution need to take into the consideration?
    Can you any provide how the standard HCM & forms Process  technical flow and logic.
    Where I can find the technical information of the Webdynpro Component: HRASR00_PROCESS_EXECUTE. If you any please share the same.
    Thanks in Advance.
    Regards
    SS

    If i understand you correctly you want to replace adobe with WD4A
    it was done here
    refer here
    /people/brad.pokroy/blog/2010/10/05/web-dynpro-forms-using-hcm-processes-and-forms
    While investigating and figuring out the best way to classify a form as a "Web Dynpro form" opposed to an "Adobe form", that was one of the routes I looked into. in transaction QISRSCENARIO I started going the route of a fixed value append to domain QISRDPROCESS_TYPE and adding a new value fixed value 'W' - Web Dynpro Forms. It ended up that it would need a bit more work than just that. And I was advised that much of the data in view V_SCENARIOVERSN was populated automatically via transaction HRASR_DT opposed to QISRSCENARIO, so it wasnt the best way to do it via that field.
    Edited by: Siddharth Rajora on Apr 27, 2011 6:03 PM

  • HCM Transfer process - Authorization Check Failed

    Hi All
        We are trying to run the Standard Transfer  process of HCM . We are trying to run the tcode u201C HRASR_TEST_PROCESSu201D  Can anybody Tell us what authorization objects does a user  require to run this process if the user does not have SAP_All Authorization.
    We have already added u201CP_ASRCONTu201DAuthorization object  as suggested by sap .
    We are failing in some HR authorization check but we have already added the same in useru2019s profile and it has already been genereated . 
    Note : We have already ran this process with SAP_All Authorization and it ran succesfully . Employee was Succesfully transferred to the new position .
    Please check the shreen  shots (click the links) below to get an idea of the problem .
    Authorization Check Failed :
    Link : [http://www.mediafire.com/?edtznzkmdm0]
    Process flow :
    Link : [http://www.mediafire.com/?ytxz3wlmjiz]
    Please click on " Click here to start download.. "  to check the screenshots.

    Hi, Mr. Joe Bo.
    Thanx for your reply. We are using ECC6 (HP Unix with Oracle)
    Basis Patch - 15, Kernel 159
    I have seen the the note but it's showing ccms method defination settings, but for my case we are yet to go live we have not made any settings from sap they are planning to run a session for the go live. When i am running sdcc i am getting a error in the system log "Failed to activate authorization check for user SAPSYS"
    Thanks & Regards
    Venkatesan J

  • Data transfer processes and info packages in new client

    Hi,
    We have created new client from the development client.
    The Info cubes and update rules are available in new client, bu the data transfer processes and info packages are not moved to the new client.
    What is the actual sequence of steps to be followed when new client created from development client. Have I missed some sequence or steps. What are the sequence of steps to be followed when created a new client.
    Kindly suggest to resolve this issue.
    thanks and regards
    Murugesan

    Hi,
    I have never seen clients created on the BI system. As such all the objects in the BI system are client independent as well as the data stored in the tables does not have the mandt field. Hence you cannot distinguish different clients in the BI system. Also if you notice all the request in BI are workbench request and not customizing requests.
    I do not think this is a viable solution. Maybe you can contact SAP.
    http://help.sap.com/saphelp_nw70/helpdata/en/b7/8a9a3aaf894871e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/a9/bb963a570b4b5de10000000a114084/frameset.htm
    Regards,
    Vikram

  • Creating a new position and updating IT 1028 using HCM processes and forms

    I have to create a new position and update the related infotypes using the design time framework of HCM processes and forms. The problem I am facing is the info type 1028 is not a part of the de coupled infotype framework and does not appear in the service fields list. How can I update the infotype 1028? I was thinking of updating it using the FLUSH method of the class implementing the ADV services interface IF_HRASR00GEN_SERVICE_ADVANCED by calling the function module RH_INSERT_INFTY. But, how do I get the position ID created? Is there any other way of achieving this? Please help as soon as possible.

    HI
    Create one Function Module to return all the vacant positions and load that in a drop down.
    For IT1028 you have to update via the RH_INSERT_INFTY.
    Kind Regards,
    Mukesh

  • Position is not updating in IT0001 : HCM Forms & Process

    Hi Experts,
    I am doing the TRANSFER  Process(Standard process ORG_CHANGE)  . My workflow is completeing successfully without any error.But the new position is not getting updated in IT0001.
    Does anybody know why this is happening?
    Thanks & regards,

    Hi Mukesh,
    Thanks for the response.
    Can you tell me the IMG path where I need to check if the position field is editable? When we use PA40, position is anyways editable.
    We are using an Adobe Interactive Form in the case of our portal based HCM P&F Transfer process.
    The workflow works fine but the change in position is not getting reflected in IT0001. Do we need to do something to ensure this happens? The position field has been mapped to IT0001-PLANS.
    Regards,
    Teja

  • Error while editing standard HCM Processes & Forms

    Hi experts,
    I would Iike to test the standard HCM processes & Forms & for which I have imported the standard forms from Client 000. I have also configured the ADS & have tested the credentials as well. Everything is fine & new custom ADOBE interactive forms (Not HCM Forms) are working fine through WDA. When I test any of the standard processes using HR Administrator role in Portal, I am able to select the relevant standard process (e.g. TERMINATION) for a given employee, but when I click on the  Edi Process button, the system generates an error (short dump): "'WebDynpro Exception: ADS call failed ". I have checked OSS, but did not find any suitable note for it. I have the HR administrator role assigned in the back end & have confirmed that the ADS configuration as well as credential are working fine using the recommended reports. We are on EhP4 SP06.
    Appreciate if anyone has already experienced these probelms & can suggest any solutions. Thanks in advance.
    Best regards,
    Sameer

    Sameer,
    To me it appears that ADS is conencted to only backend ECC not to the portal system.
    Please try below:
    1. Launch WDA for HCMPF in SE80 with appropriate parameters and see if this displays interactive adobe form when you click in edit button.
    2. May be test the ADS connectivity to portal system.
    regards
    Sridhar Kandisetty

  • Video transfer from computer to new ipad (ret disp) shows transfering process, but it's not in video or movie  . ...Where'd it go ?

    video transfer from computer
             Video transfer from computer to new ipad (ret disp) shows transfering process, but it's not in video or movie  . ...Where'd it go ? sync automatically downloaded some -  but was a bit prejudiced and selective with content mainly all edited by me in Moviemaker (windows 7, probably the reason)
             I use technology since neanderthals roamed the planet . ....don't quite understand  all the nuances  . .. .So, my all things "i" (apple/mac) guru has arranged a meeting,    and I'm impatient.  I know some of my videos are in several formats, etc... and I don't quite understand the differences . ...to me, it's complicated, as Alec Baldwin would say.
            Unfortunately, I'm "late" to the game metaphoricaly ( windows vs apple/mac ). I have a couple ipods and actually endorse the ijet remote device (Co. from San Diego). I have pro tools and other hi tech gear in the pro keyboards/sequencing arena where I've been writing computer music since 80's and it's evolution.

    The Apple video app is very limited in what it will play. If you have multiple video formats and if they will play on an iPad, then you likely need a 3rd party vidoe app. One such is BUZZPlayer which is available in the iTunes App Store on a Mac or PC or from the App Store app on an iOS device.
    You transfer the videos to 3rd party video apps using iOS File Sharing.
    http://support.apple.com/kb/ht4094

  • HT204350 Started the transfer process from my old MacBook to a new MacBook pro using Migration assistant 12 hours ago. The screen says transferring your information. Moving about 270 GB using an Ethernet cable  directly connected. Is this normal?

    Started the transfer process from my old MacBook to a new MacBook pro using Migration assistant 12 hours ago. The screen says transferring your information. Moving about 270 GB using an Ethernet cable  directly connected. Is this normal?

    You can get a thunderbolt to firewire adapter. You can then get a firewire 400 to 800 cable and put the old computer in target mode. Then you can follow these instructions.
    http://support.apple.com/kb/HT4889
    Choose migrate from other disk or volume.

  • Using standard out for Process.java

    hello
    I hope I make myself clear with my problem. I want to execute a command using Runtime.exe() on windows. The first step works. I can execute this command:
    net stop server
    however sometimes the user will be prompted to input 'Y' or 'N' before completion. That means I have to provide this via standard in. This part I cannot get to work. I will attach my code and perhaps someone can enlighten me where I am flawed. Thank you in advance for any help.
         public void closeServer() {
            try
                String[] cmd = new String[3];
                cmd[0] = "cmd.exe" ;
                cmd[1] = "/C" ;
                cmd[2] = "net stop server";
                Runtime rt = Runtime.getRuntime();
                System.out.println("Exec-ing " + cmd[0] + " " + cmd[1] + " " + cmd[2]);
                Process proc = rt.exec(cmd);
                // any error message?
                StreamGobbler errorGobbler = new StreamGobbler(proc.getErrorStream(), "ERROR");           
                // any output?
                StreamGobbler outputGobbler = new StreamGobbler(proc.getInputStream(), "OUTPUT");
                outputGobbler.setProc(proc);
                // kick them off
                errorGobbler.start();
                outputGobbler.start();
                // any error???
                int exitVal = proc.waitFor();
                System.out.println("ExitValue: " + exitVal);       
            } catch (Throwable t)
                t.printStackTrace();
    class StreamGobbler extends Thread
         Process proc;
        InputStream is;
        String type;
        StreamGobbler(InputStream is, String type)
            this.is = is;
            this.type = type;
            proc = null;
        public void setProc(Process proc) {
             this.proc = proc;
        public void run()
            try
                String line=null;
                while ( (line = br.readLine()) != null){
                    System.out.println(type + ">" + line);
                     if(type.equals("OUTPUT") && (proc != null)) {
                          if(line != null && line.indexOf("Do you want to continue this operation?") > -1) {
                               OutputStream os = proc.getOutputStream();
                               PrintWriter pw = new PrintWriter(os);
                               pw.println("Y\r\n");
                               pw.flush();
                               System.out.println("wrote Y");
           } catch (IOException ioe)
               ioe.printStackTrace(); 
    }As you can see, I assume you get answer back at the appropriate time via the outputstream of the process

    Thanks everyone for your quick response,
    I have the old ODSs built in 3.5 version which used infosource, update rules and transfer rules.
    And they are running for the past 6 months now. And they don't have DTP.
    My new ZDSO has got transformation and DTP.
    If I use the same Infopack for my both the data target, how will I do a full load for my new DSO. will the existing delta process not get disturbed?
    Please advice
    Thanks

  • Solved my problem - random files dropped or corrupt in transfer process

    Ok, problem for me similar to some others I've seen so I'll post it here: sporadic NEF files transferred with Bridge CS4 are unreadable about 1 in 20.  Looking at the problem file itself, it's size is 0 bytes like the transfer process made the file, but didn't put the data into it.  NEF's are still fine on the camera or cardreader.  I have isolated this problem to Bridge only on the following computer while transferring JPEGs or NEFs from different cameras, cards, readers.  Sometimes I'll also get random filenames with no extension as well.  CaptureNX2 and explorer "drag and drop" work fine.
    Windows XP 64bit
    4GB RAM
    2xHD RAID 0
    3.0 GHz AMD
    Bottom line, after a lot of experimenting, I could lessen the amount of errors that bridge made by turning down my processor.  Going with that, I isolated some BIOS features and found the "cool and quiet" feature (which changes the CPU multiplier based on system load) as the problem.  Now, with that feature disabled I can get 100% transfers with the system running at full speed.  I would say by reading many of these threads that there are similar features on a lot of newer AMD and Intel systems that seem to not play very well with Bridge. 
    I know not exactly the same problem you may have, but maybe some insight to a larger issue with that function in Bridge/ACR/LightRoom
    Best - Bennett

    Hello and welcome to the Forums.
    DBFixit by Pimlico software can be a god send at times trying to find and fix corrupt data. Although by Palms standards it is considered 3rd party software we cannot support it, but let me tell you we recommend it all the time to our customers with data issues. It is designed to work on Palm OS's and does a great job. I'm glad it worked out for you. 

  • HCM & forms Process using WD4A

    Hello All,
    We are planning to implement applications of HCM & forms Process using WD4A same like standard create Position u2026etc. to avoid Adobe forms. Could you please share your advises, suggestions and approach to be followed. Best feasible solutions.
    Where I can find the technical information of the Webdynpro Component: HRASR00_PROCESS_EXECUTE. If you any please share the same.
    Thanks in Advance.
    Regards
    SS

    Hi Sridhar,
    Check this.. might helps..
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/4f/202423bbde4f3ebbb2654069378ecd/content.htm
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/aa/d4e0064cd0499f8d05bd587907f764/content.htm
    WD component HRASR00_PROCESS_EXECUTE - HCMPF
    http://www.surfingincognito.com/index.php?q=aHR0cHM6Ly93ZWJsb2dzLnNkbi5zYXAuY29tL3B1Yi93bGcvMjA5MDU%3D
    Cheers,
    Kris.

  • Advice on MSS Employee Transfer Process

    Dear Expert,
    We have requirement so a manager could transfer ( or at least initiated request)  his/her employee to other department. I'm aware that normally this was done by either PCR or HCM process and form. But the Adobe license is costing too much making the PCR or P and F form out of our options. Is there any other way to do this? Please Advise. Thanks
    Best Regards

    Hi,
    I am not sure how different your transfer process is from the standard SAP delivered transfer process.  My understanding of license is...if you are using standard process delivered and do not add any fields of your own..and only make changes related to logos and static text..you do not need additional license for Interactive forms.
    So probably if your process can fit the standard one..you can still use adobe forms and dont need to develop custom application.  But better to check with your SAP account manager on these conditions.
    THanks,
    Jigar

  • Import standard Purchase Order process and interface tables

    Hi all,
    We are populating three PO interface tables from our custom developed application. PO_HEADERS_INTERFACE, PO_LINES_INTERFACE and PO_DISTRIBUTIONS_INTERFACE. We are using 11.5.10.2 version of Oracle Apps.
    Initially we did not manage to populate the distributions interface table, but, now we are populating it. And after doing so, when we run the Import standard Purchase Order process for 'Approved' POs, the process_id for even the record which has correct distributions info also gets 'Rejected' as a value. The process is considering a mix of records : the approved POs that DO NOT HAVE distribution info in PO_DISTRIBUTIONS_INTERFACE (which we had not managed to populate) and the approved POs that HAVE distribution info in PO_DISTRIBUTIONS_INTERFACE.
    does the Import standard Purchase Order process populate partial data that could be good or it rejects the whole lot of records?
    Can anyone guide on this issue?
    Thanks and kind regards,
    Aparna
    Edited by: Aparna on Jul 24, 2009 3:45 AM
    Another piece of info I would like to share is
    I have run the process for an approved PO with distributions info in PO_DISTRIBUTIONS_INTERFACE. This time no mixed data. In PO_INTERFACE_ERRORS table, an entry was found: for column name : PO_DISTRIBUTION_ID in ERROR_MESSAGE column 'Error: Has no distributions'.
    Edited by: Aparna on Jul 24, 2009 8:03 AM
    After carrying out number of tests, I have found out that
    1) if the approval_status for the po is 'Approved' in the po_headers_interface table, it gives the above mentioned error and the process_id is 'rejected'.
    2) if the approval_status for the po is 'Incomplete' in the po_headers_interface table, the process add the 'accepted' value for the process_id. But, the charge account number is not populated in shipments.
    Edited by: Aparna on Jul 31, 2009 1:07 AM
    There has been some progress on this issue. The process sees distributions data into the PO_DISTRIBUTIONS_INTERFACE table. Yet the following errors are found in the process log file:
    Start dist default process
    before getting period name
    after getting period name
    -->Intfc error occurred ...PO_PDOI_INVALID_GL_ENC_PER
    before workflow
    unit price = 18.5, rate = , unit price in functional currency = 18.5
    after workflow
    Start dist creation process
    Start dist validation process
    -->Intfc error occurred ...PO_PDOI_INVALID_BUDGET_ACCT
    Start insert new record into po_distributions
    Distribution ID: 252
    dist num: 1
    last updated by: 1189
    po header id: 5283
    po line id: 5878
    line loc id: 5924
    sob id: 21
    cc id: 1560
    qty ordered: 10
    Req Header Ref num :
    Req line Ref num :
    Req dist id :
    ROW ID: AAHUc1AFPAAAQ04AAC
    call tax
    Rollback for the Last Errored Line: 10
    All Lines in error - Rolling back the header
    We opened new GL periods for the calendar and yet same errrors are seen. Can anyone suggest any solution?
    Kind regards,
    Aparna

    Hi
    Do you have a copy of your insert statement?
    regards

  • My apple id attached to my itunes account has expired and i have forgotten the password that was attached to it! I have created a new apple id but cannot transfer it to my itunes which all my apple products connect up to on my mac?! HELP!

    My apple id attached to my itunes account has expired and i have forgotten the password that was attached to it! I have created a new apple id but cannot transfer it to my itunes which all my apple products connect up to on my mac with all my pictures etc on!?! HELP!

    My apple id attached to my itunes account has expired
    They don't expire. As far as anyone knows Apple IDs live on forever - if you forgot its password use https://iforgot.apple.com. Good luck with the answers to whatever security questions it asks.
    ... I have created a new apple id but cannot transfer it to my itunes which all my apple products connect up to on my mac with all my pictures etc on!?!
    Right! That's the reason you do not create a new Apple ID.
    As far as Apple is concerned a new Apple ID is a completely different user, with absolutely, positively no access to anything available to any other Apple ID.
    Concentrate your efforts on resetting the password to your old Apple ID. It has not expired, and is the only way to use all your existing iTunes purchases, App Store purchases, computer authorizations... etc. Forget about the new Apple ID you just created.

Maybe you are looking for