Position is not updating in IT0001 : HCM Forms & Process

Hi Experts,
I am doing the TRANSFER  Process(Standard process ORG_CHANGE)  . My workflow is completeing successfully without any error.But the new position is not getting updated in IT0001.
Does anybody know why this is happening?
Thanks & regards,

Hi Mukesh,
Thanks for the response.
Can you tell me the IMG path where I need to check if the position field is editable? When we use PA40, position is anyways editable.
We are using an Adobe Interactive Form in the case of our portal based HCM P&F Transfer process.
The workflow works fine but the change in position is not getting reflected in IT0001. Do we need to do something to ensure this happens? The position field has been mapped to IT0001-PLANS.
Regards,
Teja

Similar Messages

  • Cost center assignment to Position not updated in IT0001 Org Assignment

    Hello,
    I have assigned Cost centers to all Positions (A011) in IT1001 through PP01 from 01/01/2011.
    Now when I see IT0001 in PA30, most of the employees have the updated IT0001 with cost center from 01/01/2011. But few employees have multiple IT0001 records past 01/01/2011.
    e.g. there are 2 records for  IT0001 for particular employee.
    1. from 02/01/2011 - 12/31/9999
    2. from 01/01/2011 - 01/31/2011
    For these employees, cost center is not updated in IT0001 Org Assignment. I tried running RHINT00 and RHINT30 reports but didn't help.
    Please guide, which report tp run to solve this issue.
    Thanks in advance.
    Madhu

    Mr.Fun,
    for these employee rerun the action with the same date.
    and chek.
    some of the table entries are not projected perfectly.
    If you rerun the action it will fills that if not the check the cost center assignment to the position done perfectly r not.
    it is advised to assign cost center to the Org.Unit. instead of no. of positions.
    system automatically considers for all the positions in that org.unit.

  • Standard HCM & forms Process development using WD4A

    Hello All,
    We are planning to implement applications of Standard HCM & forms Process using WD4A same like standard create Position u2026etc. to avoid Adobe forms.
    Could you please share your advises, suggestions and approach to be followed. Best feasible solutions.
    To meet the same like standard solution what are the precaution need to take into the consideration?
    Can you any provide how the standard HCM & forms Process  technical flow and logic.
    Where I can find the technical information of the Webdynpro Component: HRASR00_PROCESS_EXECUTE. If you any please share the same.
    Thanks in Advance.
    Regards
    SS

    If i understand you correctly you want to replace adobe with WD4A
    it was done here
    refer here
    /people/brad.pokroy/blog/2010/10/05/web-dynpro-forms-using-hcm-processes-and-forms
    While investigating and figuring out the best way to classify a form as a "Web Dynpro form" opposed to an "Adobe form", that was one of the routes I looked into. in transaction QISRSCENARIO I started going the route of a fixed value append to domain QISRDPROCESS_TYPE and adding a new value fixed value 'W' - Web Dynpro Forms. It ended up that it would need a bit more work than just that. And I was advised that much of the data in view V_SCENARIOVERSN was populated automatically via transaction HRASR_DT opposed to QISRSCENARIO, so it wasnt the best way to do it via that field.
    Edited by: Siddharth Rajora on Apr 27, 2011 6:03 PM

  • In HCM form & process Workflow event linkage changed to inactive status.

    Hi,
    In HCM  form & process event linkage is activated in HRASR_DT and workflow object .
    Now once we complete the process from EP portal ,reference number is generated and enteries are created in  table T5ASRPROCESSES .
    In SWEL,event is triggered and linked with the same workflow.
    Now the problem is,thesre is no workitem in SWIA with this workflow numbmer and the event linkage also changed to inactive status ( both in proces and  workflow )after we complete the process from EP.
    Thanks
    Manoj

    Hi
       When you are delaing workflows with HCM Process and form the behaviour is slightly different from the normal.. In order to check why the event linkage is inactive the possibilities are
    1. Either there are some chnages done in the workflow  and it is not activated from the transaction HRASR_DT.
    2. The other possibility is that you might have directly actovated the workflow from SWDD transaction and if you have done in this way then it is a wrong way of generating and activating the workflow
    Follow the below steps to find the error
    1. Execute HRASR_DT txn and try to activate the workflow from here. If you try to activate the workflow from this transaction the check function module which is linked to the workflow will be knowing that for which specific process which workflow has to be triggered..
    so in HCM process and forms frame workf it is always suggestable that try to create the workflow from HRASR_DT transaction using forward navigation and activate the respective event linkages.
    The other point you need to check is make sure that all the respective program exit classesare included in the basic data of the workflow other wise even if you miss the program exit classes in the basic data the workflow will not be able to start its process/execution.
    Regards
    Pavan

  • HCM & forms Process using WD4A

    Hello All,
    We are planning to implement applications of HCM & forms Process using WD4A same like standard create Position u2026etc. to avoid Adobe forms. Could you please share your advises, suggestions and approach to be followed. Best feasible solutions.
    Where I can find the technical information of the Webdynpro Component: HRASR00_PROCESS_EXECUTE. If you any please share the same.
    Thanks in Advance.
    Regards
    SS

    Hi Sridhar,
    Check this.. might helps..
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/4f/202423bbde4f3ebbb2654069378ecd/content.htm
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/aa/d4e0064cd0499f8d05bd587907f764/content.htm
    WD component HRASR00_PROCESS_EXECUTE - HCMPF
    http://www.surfingincognito.com/index.php?q=aHR0cHM6Ly93ZWJsb2dzLnNkbi5zYXAuY29tL3B1Yi93bGcvMjA5MDU%3D
    Cheers,
    Kris.

  • HCM Forms & Process - ISR Cookbook

    Hi,
    Does anyone know where I can obtain the latest version of the ISR Cookbook which illustrates the process for linking the new HCM forms& Processes with Application type H. Alternatively does anyone know the final step in linking the HCM Form Scenario/ISR Scenario and Process to a Role/iView in MSS.
    Regards,
    Vera

    Hi,
    This url only points to the part of ISR scenario involving creation of the scenraio and the form per se. Our main concern is the linakge to the MSS. How do we see it in the portal. The previous method of linking such ISR scenarios to the portal/MSS as illustrated in the cookbook does not work for the new HCM forms and proceses defined with the application type H.
    MVH/Vera
    > <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en
    > /43/3cce49f8e6181ae10000000a1553f6/content.htm">Configu
    > ration of ISR Scenario</a>.
    >
    > ~Suresh

  • Using Digital Personnel File for HCM Forms & Processes

    Hi,
    We would like to use Digital Personnel File for HCM Forms & Processes to save forms and attachments using record case management. For this to be done record case management needs to be customized. Can you provide the steps for record case management customization and integrating digital personnel files with HCM forms.
    Regards,
    Amit

    http://help.sap.com/erp2005_ehp_03/helpdata/en/43/1d63953fce3566e10000000a11466f/frameset.htm
    Refer here

  • Drop down lists in Interactive forms:HCM Forms&Processes

    Hi Experts,
    I am working in HCM Forms and Process.
    I have 2 dropdown lists in my  interactive form such as COUNTRY, STATE. The STATE dropdown should be populated based on the COUNTRY field dynamically.
    I have written the logic for STATE dropdown in the method GET_STATES of  Custom Generic Service Implementation Class and that method is used in the OPERATION of FIELDGROUP in Form Scenario.
    The Java Script in the EXIT event for COUNTRY is as follows.
    xfa.record.CONTROL_PARAM.ISR_EVENT.VALUE = u201CGET_STATES";
    app.eval(u201Cevent.target.SAPSubmit();u201D);
    Still the the STATE lists is not populating in the form in Portal.
    Please provide some valuable inputs on this.
    Thanks in advance

    Hi Mukesh,
    Thanks for your response.
    It seems the script is not triggering .I didnt get the alert message.
    I am working in Citrix and SAP GUI 710 has been installed now. Still, I can't insert Webdynpro Script. It is showing one error "Error while inserting Webdynpro script".
    Earlier, in SAP GUI 640, I was able to see with the Data view with the interface import parameters. Now  the Data view(Left side of Layout)  has no elements , although the form is linked with an Abap dictionary based interface.
    Do you have any idea why these kind of errors are coming? Is this the problem with Citrix ?

  • Reg HCM Forms/Processes with Adobe Forms

    Hi,
    Details of the differences between HCM Forms and Processes with Adobe Form based PCR's and the recommendations for the selection between the same. Point of view on which one can be used.
    Regards,
    Sujana
    Edited by: Sujana Reddy Kumbham on Feb 9, 2009 9:06 AM

    SAP_PA backend service EXPECTS either a hardcoded/configured subtype OR a "*" for all available subtypes (which won't work in your case). What you "could" do is get creative with "rules" and check if values are entered, and then if so, do the operation for your subtype.
    What you will need to do, which is what I do a LOT because of issues with SAP_PA is to actually make you update/changes in a backend function module (triggered in workflow). Now, things get a bit more complicated.....
    Priod to EhP3, you could just call the ol' infotype operations function module in your own FM to do the change. However, from EhP3 and onward, you will need to do this via classes (same used by decoupled infotype framework.
    Soooooo......time to get creative with your solution.

  • GR Cost not updating as Target Cost for process orders

    Dear SAPians,
    We are facing an issue in Target Vs Actual cost reporting for process orders. We are creating a process order after cost estimate of that material and doing the confirmations for activity cost. After that, GR has been done for the finished goods of that process order. That GR entry is updating the Actuals values but not updating the Target cost. When I am checking the standard report KKBC_ORD, I am getting the following figures.
    Cost Elemnt Text     |     Target Cost     |     Actual Cost     |     Target Vs Act
    Inventory Chnge FG     |     0     |     1,472,205.60-     |     1,472,205.60-
    Packing Matrl Cons.     |     1,148,142.37     |     1,252,752.68     |     104,610.31
    Raw Material Cons.     |     60,463.91     |     50,688.29     |     224.38
    Semi-Fin Matrl Cns.     |     181,934.68     |     367,959.56     |     186,024.88
    Labour Cost Activity     |     39,735.36     |     39,862.80     |     127.44
    Machine Cst Activty     |     41,611.75     |     43,153.01     |     1,541.26
    That 'Inventory Change FG' entry is showing the GR posting updating actuals and not target cost. This is causing huge difference in target vs actual cost that will affect the profit and loss figures ultimately.
    What am I missing here? What should I do to update the GR amount in Target cost as well.
    Shirazi

    Dear,
    Target Cost on Production Order or Process Order is shown only when Variance is Calculated.
    So please calculate the Variance, system will show the Total Target Cost.
    Br,Vivek

  • Do Not Update Display when running Batch Processes

    This has been the case since the beginning of time so it would be great if this could be sorted.
    I'm sure batch processes would be immeasurably faster if Audition didn't update the waveform display with every single process. When I'm batching hundreds of WAV files this makes things sllllooooowwwwww.
    An option before running the batch to 'do not update waveform display' would be a godsend.

    Bump

  • Files that "remember playback position" are not updating during sync

    I listen to long spoken word MP3 files that are not podcasts. I have the "remember playback position" option checked on these files. I will add it to my library, sync it to my 2nd gen iPod shuffle, then go play it. The shuffle will remember the playback position fine. When I plug it into the computer again, iTunes used to update the files on my computer with the new playback position from the shuffle. This is not the case anymore. The local files will stay at the spot where they were at the original sync (0:00 in most cases). The files on the shuffle will then go back to 0:00 as well. This is very annoying. Any ideas?
    P.S. I'm using the newest Shuffle that was released along with the 4th gen Nano (mine is the 2GB blue).
    I know this is supposed to work because I had a silver 1GB shuffle in 2007 that worked fine.
    Message was edited by: ajstahl

    ROFL I've named this thread "Shuffle Woes" in my favorites list. I seem to have fixed this strange and VERY elusive problem for now.
    I discovered a duplicate music file that had the same metadata as another music file. The only difference between the two files was the name of the physical file on the hard disk AKA the file name. The metadata (tags) were exactly the same. Now that I've deleted one of the two files everything seems to magically work again. Don't ask me!
    If the problem resurfaces again I'll be back. No more shuffle woes!

  • HCM forms & process  loss of information after server roundtrip

    Hi  all,
    We recently updgraded our ECC system  to sap abap sapka70018, ADS 7.0 sp19.
    Our forms have stopped working, the issue is when the update information button is clicked to display information, all entered  information is lost. All forms were updated using sfp_zci_update and the script was updated. fp_pdf_test_00 was executed and the result is a different version than that updated in the scripts. Several notes have been applied.
    1. What is the relationship between the form script version and ADS, should it be the same and how to accomplish that task.
    2.  How to debug and find the user event called by the badi once the button is clicked ( button is embedded on the form and    called  by javascript)
    3. what is a possible solution?
    Regards,
    LM

    Hi Sridhar,
    Check this.. might helps..
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/4f/202423bbde4f3ebbb2654069378ecd/content.htm
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/aa/d4e0064cd0499f8d05bd587907f764/content.htm
    WD component HRASR00_PROCESS_EXECUTE - HCMPF
    http://www.surfingincognito.com/index.php?q=aHR0cHM6Ly93ZWJsb2dzLnNkbi5zYXAuY29tL3B1Yi93bGcvMjA5MDU%3D
    Cheers,
    Kris.

  • HCM Forms&Process :Authorization error while opening work item in the UWL

    Hi,
    The process has been started successfully and the work item was appeared in the  UWL of MSS.
    But when I try to open the work item  , I got the following errors:
    "User XXXX doesnot have authorization on pernr 8000123"
    "You are not authorized to process this process"
    When I checked, the User XXXX has the required roles for authorization such as SAP_ASR_MANAGER and SAP_ASR_EMPLOYEE and the authorization object P_ASRCONT has been assigned to it as well.
    Still why these errors are coming?
    Does anybody know about it?
    Thanks & regards,
    Lek

    Hi,
    I have had exactly the same error. Make sure you have read the help.sap.com documentation carefully:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/43/3d8f8118391bcbe10000000a1553f7/frameset.htm. The minimum requirement is access to one infotype (it does not matter whether there is data in the infotype and it does not matter which infotype you choose) via CHECK_MIN_PERNR_AUTHORIZATION of BAdI HRPAD00AUTH_CHECK. More specifically, we solved it be providing access to infotype 0002 to all employees.
    Furthermore, check what level of authorizations you have set in the config for the activities.
    IMG->Personnel Management->HR Administrative Services->Authorizations->Define Authorization Method for Activities (All Processes) or Define Authorization Methods for Activities (for Each Process Group).
    This should help you solve your problem.

  • HCM Forms& Process (Exception OADP_USAG Error )

    Hi All,
    I am getting exception whilie executiong MSS Portal  . Below is the Exception Details.
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_WDR_RT_EXCEPTION', was not caught
    and
    therefore caused a runtime error.
    The reason for the exception is:
    Component Usage OADP_USAGE Does Not Have an Active Component
    I am using supprot package 30 .
    Thanks...and Regards..
    Priyank Dixit
    Edited by: priyank dixit on Mar 21, 2011 2:59 PM

    Hi Priyanka,
    Even we are facing the same dump 'Component Usage OADP_USAGE does not have active component' on click of Start Process button...
    Can you please tell me how your issue got resolved...
    Our system is on SP11 and so we are unable to implement mentioned notes....

Maybe you are looking for