New project

my new project is to create a flash site for an resturant.
the have an html site, that they don't want to chage. I am aloud to
create a new home page that allows the user to choose between the
two, or create a new html . I have complete control over design.
and I'm looking for some ideas. seeing the html is of common
design.
heres a link to the html site
http://osakasushiexpress.com/

Awful colors... Projects an image of a cheap take out place
with outdated seafood... Website is well organized though - may be
a good template for Flash architecture.
From a functional perspective, looks like dishes are well
categorized. So, perhaps, each category deserves its own "page". If
this is it - there should be a navigation pane - on click a list of
corresponding dishes will be displayed with an image of a related
dish (hope they can take better images).
I would make a class that extends Sprite. Inside the class
there can be a functionality to compose lines for items. Each line
could be a separate class too.
As for the info I would go with XML that organizes the menu
based on the category and has nodes pertaining to each line item
and separate nodes for images and additional items (like
dinner/lunch specials). If they don't change menu often (no one
does anyway) - XML can be hard-coded in the code. Otherwise - can
be loaded at runtime.
So, above mentioned class would be fed with the parts of XML
that are related to category and populate line items accordingly.
I think it is a pretty easy and straightforward project (only
if they were willing to change the colors).

Similar Messages

  • New Project - New Problems or The day the Reaper died

    Ok, this is more like telling a story than a cry for help.
    The story is about a new project, new (great) results and the disaster that followed.
    Well story starts October 21st with me upgrading rig 1 with new parts. They came for my Opteron165 setup which oc'ed nicely but didn't make it far enough. So board, cpu and ram of rig 1 (sig) got replaced by the following parts:
    The new cpu is an Athlon X2 5200+ EE (TDP 65W), 2.6ghz, 2x 1024kb L2 cache, 90nm, F3 stepping.
    The board is from MSI (of course), a K9N SLi Platinum. Very nice board and luckily it is PCB version 1.2 which features a heatpipe while the older version just had a very bad cooling, passive aluminium heat sink. The older version is the one still to be seen on MSI product site.
    The new one looks therefor way better and stays cooler:
    In addition I threw a pair of the finest ddr2 ram in it. A 2gb dual channel kit of OCZs new DDR2 PC2-6400 Reaper CL3 Edition. DDR2-800 with 3-4-4-15 (stock), guranteed to work with 2.3volts.
    So suppositions for oc were great and I started:
    First of all upgraded the bios from 1.8 to the latest 1.10. Then I thought why go step by step, why not starting big. So I set HT clock to 250mhz, resulting in a cpu clock of 3250mhz (multi 13), Hyper transport link set to 800mhz (x4), ram very relaxed (divider 667, 5-5-5-15 2T). It didn't post but I thought solution is easy, forgot to set extra voltage for cpu. Next try at 3250 mhz with 1.25v and set 0.1v extra in bios. It didn't post. I set voltage to maximum but no luck. Tried again but this time I lowered the HT link to 600mhz (x3). Now it posted even with 1v extra and it also booted XP but seemed to be not very stable. So set extra voltage to 0.15v which enhanced stability greatly.
    After minor driver problems my old XP installation worked pretty perfectly with the new setup. Time had come to see if it was stable and I started Orthos. It seemed to be ok, 1hour no problems, 2hours, 3hours and bam... 3hours 40 minutes and that's it. I thought "Damn, but it will make it with more voltage". I added more voltage (0.2v extra) and started Orthos again but no way, at 4hours 32 minutes it stopped again.   
    I'm not easy to discourage and so I added 0.25v to the 1.25v vcore and tried another time. Still 250x13 = 3250mhz.
    And it worked!
    Orthos now easiely worked six hours when I stopped it myself to see if it would also be stable with more intensed ram settings. I set ram divider to 800mhz (1:1) resulting in DDR2-929 and timings to 4-4-4-15 2T.
    I started Orthos and left the machine alone... Outstanding 16 hours later it was still working!
    After 17hours 5 minutes and 50 seconds of running Orthos I knew I had a stable beast!
    It also worked with ram set to divider 667 (resulting in 406mhz or ddr2-812) and 3-4-4-15 2T. However 1T was a real killer, thats why I left command rate at 2T and were happy so far.
    Performance was really good and I wanted to know if this would increase my 3dmark06 results which were already great with old setup because of nicely oc'ed 8800GTS 320. The opteron could do 9572 3dmarks with it.
    The new setup easiely broke the 10.000 points by reaching 10306 points with cpu at 3250mhz, ram at ddr2-929 (4-4-4-15 2T), vga as seen in sig.
    It really seemed to be finished. The rest would be just playing around and going for suicide clocks. At least that was what I thought at that time.
    Before maxing it out I wanted to have the Vista 64 Ultimate installation also running with the new setup. I hadn't booted vista since upgrading to the am2 system, so I tried for the first time....
    AND NOW EVERYTHING GOT F***** UP
    Vista welcomed me with a blue screen instead of a logon screen. I was pi**** but aware it might not like changing from NForce4 SLi to NForce 570 SLI. Next step was trying safe mode but vista thought of blue mode and showed a screen of that colour. I thought "ok, maybe you dislike setup change" and so I went for a clean install. I even formated the partition and gave it a go. Installation was fine 'til first start. Well, it wasn't a start to be honest as vista told me it was not able to do this. Repair wasn't successful either.
    Assumption was now system is not making the oc clocks although proved to be stable under XP. So I removed any oc and loaded fail-safe mode in bios. Relaxed ram timings to 5-5-5-18. I started installing vista again, thought I could oc again when it is installed.
    Oh boy, how wrong I were...  The 2nd installation turned out to be as faulty as the first and I tried again and again... After installation failed nine times I were finally discouraged.
    I just wanted to boot XP for now, forget about installing vista and maybe ask here if it this was a known issue.
    Well, I didn't get to see XP. I was just informed about a missing file that also prevented to boot safe mode. I took my XP cd and started automatic repair. After this was nearly finished the first errors and notifications about unknown, missing or corrupted files appeared. Although XP made it to finish install and booted successfully. But this XP wasn't a real XP as many things didn't work. I couldn't install drivers because loads of errors and crc crap made working with it impossible. Clear install time! But no way, same issues like seen in vista.
    Now I were pretty desperate and I urgently needed an idea.  I came to the solution maybe I could try with single channel, using just one mem stick. I removed one and tried installing XP again. It worked without any issue. Even driver installation and other software worked without a problem. Now I were even able to install Vista.
    But still I didn't know what caused all the trouble. I had three suspects: Mobo, ram, cpu. I doubted in faulty board but cpu (failing to control dual channel) or the ram stick I removed were my favorites. As it was the easiest to try I put the other stick back in but used a slot combination that would cause single channel.  Booting Vista now turned out to be a disaster. Errors, corrupt files and so on. Same with XP.
    Conclusion: Dual channel is not the problem. Added mem stick was now suspect no.1. I took the first one out and started memtest. Memtest didn't show errors after 8hours. I wondered and started Vista. Result was the same as seen before with two sticks. Errors and access violations. Replaced this stick with the other one and everything was fine again.
    Next day I tried with a borrowed MDT 2gb dual channel kit which also worked without a problem. 
    Sad but true one of the Reapers is K.I.A. . Damn....
    Now I'm sitting here with a borrowed kit of value ram which luckily allows me to let the cpu run at 3250mhz with mem divider at 667mhz (result: 406mhz) and which I can luckily keep 'til I get another kit of Reapers. I have to send my current Reapers back to vendor these days and wait for the rma process and wait and wait....
    So what started greatly ended not so great. For now I'm sick and tired of seeing bios screens or installing windows and I'm also pretty pi**** because of all the data I lost. Some crucial ones among them.
    Main problem remains: I have no idea WHY the Reaper died. I never set any higher vdimm than 2.3v what should be ok for it. It never felt hot and was directly in the main airflow. Also I have no clue why memtest didn't find any error with the faulty stick.

    Quote from: flobelix on 30-October-07, 06:12:31
    Be aware that you have to keep an eye on shader clocks when oc'ing the gpu. With common tools you're oc'ing gpu and shaders at the same time. Since I'm suspecting a misproportion of gpu/shader clocks to be one of the reasons for problems with factory oc'ed Geforce 8 you should try with different combinations. With the latest Riva Tuner you can change 'em seperately without having to mod the bios.
    Memory is at it's end I suppose, that's the problem with most high end cards, no potential. Seems as you have to live with that.
    That's true for HD2900 series I think but as far as I know 8800GTX needs it even for stable working.
    Could be your psu is too weak, maybe really time for the new Corsair. On the other hand should be strong enough I guess.
    You're ungrateful! That good old 3500+ oc'ed so well and was once a real performer and you call him crap.... bad boy.
    "You're ungrateful! That good old 3500+ oc'ed so well and was once a real performer and you call him crap.... bad boy. "
    yes you are right the CPU perform great, but its just old..(is not CPU fault in direct sense )
    "Be aware that you have to keep an eye on shader clocks when oc'ing the gpu. With common tools you're oc'ing gpu and shaders at the same time. Since I'm suspecting a misproportion of gpu/shader clocks to be one of the reasons for problems with factory oc'ed Geforce 8 you should try with different combinations. With the latest Riva Tuner you can change 'em seperately without having to mod the bios."
    Yes im aware about it, but not this is the case.. i got instability even with 2Mhz on the GD more...SD remain @ stock 1350 and memory stock as well.. and go instability...
    Reversed story if i put everythink is stock, but +2Mhz more on the memory i got the same instability....
    "With the latest Riva Tuner you can change 'em separately without having to mod the bios."
    hmm nope here, its locked increasing GD clock inscrease SD clock as well. they are locked and increased in parallel.(etc, both in same time)
    "Memory is at it's end I suppose, that's the problem with most high end cards, no potential. Seems as you have to live with that."
    mem. chips used are for 1000Mhz the VGA stock, MSI is not OCed them.. so they must have potencial.. also VGA is adverted with DOT... at least its designed to handle till 5-6% OC, i have done few review(don't trust much here,but anyway its an info) and user opinion no problem to OC till 2100Mhz(1050). So i doubt that is memory problem.
    "Could be your psu is too weak, maybe really time for the new Corsair. On the other hand should be strong enough I guess."
    Yes that is the only conclusion which i can stuck at the moment... Good news is that i have talked with distributor today and they ensured me that will delivered tomorow for me. So tomorow i will know more about that mistery when i install the more powerful(and hope so great) PSU.

  • Error while opening a new project

    Hello,
         Our team has been working on RoboHelp 7 for some time now. I recently joined the team and they had asked me to work on RoboHelp 8 and give them a presentation on the same. I downloaded a trail version of RoboHelp 8 and installed it.
    Problem:
         When I open RoboHelp 8 and select Application Help or Blank Project, I start getting errors (I have tried all other options too with no luck).
    Process:
    Open RoboHelp 8
    Select "Application Help" under "Create New"
    On Clicking "Finish"
    The following errors occur
    And so on... It continues with a lot of other errors.
    Any suggestion on how to open a new project with out these errors will be very much appreciated.
    Thanks in advance
    Calcasmy.

    You wouldn't necessarily be aware of the problems when installing. Have you specifically checked with your IT that they do not store your profile on the network. That bit is important.
    Then try http://www.grainge.org/pages/authoring/installing/installing.htm and see the Problem Installations section. One link helps with installs that have failed and the other removes installations more deeply than the programs own uninstall routine. You may need to install again for RevoUninstaller to work.
    I suggest you work with IT using either of the links.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Error when creating a new project in sharepoint

    I am getting this error "Failed to create site. A duplicate field name "workflow_history" was found" when I am creating a new project on share point.
    Can someone help me identify and fix this issue exactly.

    Check if below helps
    http://zimmergren.net/technical/sp-2013-duplicate-field-name-was-found-after-upgrading-your-sharepoint-2010-solutions
    http://jshidell.com/tag/finding-a-duplicate-field-name-was-found-error-in-sharepoint-2010/
    http://www.sharepointassist.com/2011/11/05/a-duplicate-field-name-x-was-found/

  • Photoshop CS4  shuts down only when creating new project.

    I've had CS4 web premium since nov. 08 and everything worked fine until the most recent update from adobe.
    I ONLY have this problem with Photoshop cs4: when creating a new project after selecting the aspects (name, width, hight, etc.) when you press ok it shuts down and no error is given as to why it shut down, it just does.
    opening documents that had been created prior to the last update isn't a problem, I'm able to do everything Photoshop cs4 has to offer.
    I can also open a file started in another program and edit them in PS CS4 (ie: fireworks , or AI).
    but for some reason if I want to start a project in photoshop it just shuts down, never used to happen. any clues? any one else have a similar problem and know how to fix this?
    running on windows XP

    I think you mean a new docuement - Photoshop doesn't have "projects".
    Photoshop shouldn't "shut down" - there should be some message about a crash.
    And the most likely causes at that point are OpenGL (try turning it off in prefs) and your default printer driver (try changing default printers).

  • Unable to start new project in Premiere elements 10

    I have had elements 10 (both photoshop and premiere) downloaded for a while from a multi-pack and have been using photoshop with no problems at all.  Tried to use premiere and start a new project from the welcome screen, but it starts loading, gets to 'Loading Importer Quicktime.prm' then does nothing.  I can open the organizer, but nothing else.  Tried opening a new project from the organizer, but the same problem.  I have uninstalled, reinstalled from disc, and checked quicktime, flash etc are all up to date.  Any ideas?

    What operating system are you using?
    If Windows, have you manually gone to Windows Update and ensured you have the non-critical updates (which dont' download automatically)?
    How fast is your processor, how much RAM do you have and how much free, clean, defragmented space is on your hard drive?

  • Drag drop photo import to aperture folder why auto new project folder appear .

    i do import photos from desktop  to folder that i want in the aperture libary  . as soon as i drag and drop photos automatically new peoject folder appear in the libabry as name untitled project.. why? i dont want that new project folder.  i try to delete that folder and my picture all automatically deleted from library.
    also if i try to delete photos from preject folder .. it completely deleted from master library .. picture will be lost.. why?
    i drag and move pictures to  brand  new album or folder .. then try to delete wanted project folder - master picture are all gone.
    now i have at least 30-40 of untitled project folder in the library ... pictrure are not movable i meant you can move but u still have to keep old project folder to avoid master picture can not be deleted ...
    someone help me? did i make myself clear?

    You might read the manual or the Help as this is all covered there.
    If you want to import to a specific project use the File -> Import option. You can select your destination there.
    Every photo in a Library is in a project. Projects are the basic building block of the Library. That's why.
    Folders don't contain photos. They can contain Projects or Albums. These contain photos. Albums don't contain the actual photos, just links to them. So if you add a photo to an Album and then delete the project... you delete the photo.
    Remember: you don't move photos to an Album, you add them.
    Regards
    TD

  • "New Project" choose option & when choose new, "Electric Guitar" -nothing!

    Hi, Please would someone help me figure this GB preview/problem out?!
    GB was fine for a few months, new computer etc but then...
    here it is:
    One day when I opened GB, i selected 'electric guitar' icon option in the 'new project' section where you can choose 'software instrument',
    'real instrument' and 'electric guitar' options
    to start the project off with, clicked 'choose' and nothing happened.
    So i chose a normal one and went in and tried to get up a 'new track' and selected 'electric guitar' from there, but nothing. No amps or pedals anywhere in the right hand list section. Normal/software tracks opened and worked ok.
    Now there are no icons/options in the 'new project' window,
    at all!
    It's dark grey - but if i double click on the 'new project' button on left list,
    it brings up a basic style project name/signature/tempo etc window and then when it opens - does with software track.
    So if i choose 'new track' from Track menu and select 'electric guitar' from the drop down preview tab thing w pictures like the preview thing used to be on the 'new project' window used to have, it doesn't do anything 'cept bring up the keyboard...
    All the 'magic' and 'learn to play' etc options come up with preview choice/options when clicked but not 'New Project'.
    Any ideas anyone?! This is what i've tried so far:
    1. i've deleted garageband plists except the one that says "com.apple.garageband.LSSharedFileList.plist" cus i don't know what that one is exactly -
    Is it safe to delete it?!
    2. repaired permissions
    3. Thought about other apps that might be causing probs - uninstalled a Guru drum thing -still no luck-
    4. in the library and i can't find 'electric guitar' folder
    in any of the application support folders...
    5. and wondered - I installed a retail copy of Logic Express 8
    so i thought perhaps that was something to do with it...
    can't remember if that was around the same time - maybe - but
    it's so difficult to use and i'm learning it o so slowly - i really need my faithful ole GB to work
    in the meantime!!
    Would appreciate any info/ similar experiences, solutions etc,
    before i resort to a GB re-install from disc
    (if that's possible from the ones that came with the computer, perhaps...???)
    Thanks in advance for helping a girl with a guitar
    who doesn't want to **** her neighbours off....

    likeawave wrote:
    I installed a retail copy of Logic Express 8
    http://www.bulletsandbones.com/GB/GBFAQ.html#missingtemplates
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Visual Studio 2013 - New Project

    Hi
    Many years ago I wrote a VB6 program for school students for diet analysis in terms of energy and a range of vitamins and minerals.  It drew comparisons against the national guidelines.  Results were tabulated, graphed and output provided in Word
    and Excel files.  The VB6 program used an Access database containing about 850 foods. It has been used by quite a few schools and appears to always be used across a network.
    My intention is to re-write the whole program in Visual Studio 2013 using Visual Basic code.  I intend to refresh the whole program and add a wider range of foods and update the comparisons using the latest national guidelines and food label formats.
    This will be my first attempt at Visual Studio and I intend to use a Windows Forms Application approach.  The data used is "static" - it does not change it is simply a "read only" file - get the data, multiply for mass and add up each
    category (energy, vitamins and minerals).  It is a "file of data" rather than a true database.  In reality a 1000 food data file should only be about 200 Kbytes.  As an Excel file it is only 150Kbytes but as an Access file it is bloated
    up to a 550Kbyte file.
    The program is not sophisticated, so, should I be using a WPF Application or a Window Forms Application?  The WFA just feels a bit more familiar than a WPF.  Also, the program is intended for loading onto a network at some schools or on a stand-alone
    computer.
    My greatest concern is about the choice of approaching the data.  A "true" database is not needed because the data is simply for about 1000 rows of food each with about 20 columns of data (numeric and text).  The Access file is simple
    but I could create an mdf file (I think) but would that be an advantage?  With the Access data I appear to have loaded the file and created a DataAdapter and I have experimented with GetData() which works.  My attempts to use ExecuteReader() failed
    completely.  Is there a better approach?  such as SQL "DataTable.Rows(RowPosition)(“column name")”??  It seems a very sophisticated method for a small file of data.
    The Access Database that I have experimented with in VS2013 appears to use Jet Drivers???? which proved to create a few problems for installations in the past.  Should I be using an mdf file approach??  I will need to distribute the data in a "resx"
    file.  I could use SQL Server Management Studio (free download) and then use VS2013 to read the Access file and build a new mdf database.....
    I am not convinced that I have the best solution.  Any comments and suggestions would be very greatly appreciated.
    Many thanks for reading this far.
    Winchestermili
    Winchestermili

    Frank
    Looking good!  The "attachment" to a new project worked first time.
    I can see all the new Classes by hovering a pointer over the "declarations" above "Public Class Form1"
    Seems to access the VBNetForum URL quite quickly using a high speed BB connection.
    I am greatly looking forward to the next stage...........
    Regards
    Keith
    Winchestermili
    Keith,
    I intentionally truncated that post with “let me know when you’re that far along” simply because it’s very easy to get lost
    with a concept that’s new. This isn’t as different as you might think though – you’ve been using a database, and now you’ll be using instances of a class (various ones).
    Over the years here, I’ve seen many times where people use databases because they assume “that’s the only way to do it”. The
    “it” actually being encapsulation.
    Encapsulation
    is what they need and certainly a database provides that (and a lot more), but it’s not the only way it can be done.
    Think about this a bit: A DataRow encapsulates the related data for whatever it is. For example maybe it’s a person’s data –
    you’d want to keep the person’s first name, surname, and things like that all together because it defines something related to that one person. You then have a collection of those DataRows in a DataTable.
    In much the same way, what I have here is similar: Instead of a DataRow, I’m using instances of a class. Instead of columns
    in a DataRow, I’m using properties of the instance, and instead of a DataTable, I’m using a List(Of Class).
    …the concept is identical.
    Classes are a means of building an object in OOP. In and of itself, it’s really just a template or a blueprint (overused metaphor).
    Deborah Kurata put it best, in my opinion, when she said that a class is like a cookie-cutter and the objects created are cookies. You eat the cookies, not the cookie-cutter!
    A class works that way exactly: You can’t “consume” a class; you consume the objects (instances) created by them and in this
    case, like a DataTable housing DataRows, I’m storing them in a very specific type of collection known as a List(Of T).
    I don’t want to get too far adrift about classes and/or OOP here – not that I would mind the discussion – but it’s a new concept
    to you and it’s easy to get confused about what’s doing what. I’ll get more to the specifics next.
    That entire class library is the data layer; it doesn’t work with controls of any sort, only the data.
    That said though, in the following I’ll explain how controls can be ‘assisted’ by the methods in the classes.
    The main class in this is the one called “FoodComposition”. That one is only barely started – the
    only
    method in it so far is an overloaded way to add a new instance to a list of them.
    Two of the classes are really just ‘supporting classes’ – those being the ones called “FoodCategory” and “LabelNote”. Don’t
    get me wrong here, they do have methods in them (with more to be added), but you won’t too much be working with those in the user’s program – you will in the program that I’ll create for you to add/modify/remove* and so on, but for now let’s set those two
    aside.
    *  The fact that these are “supporting” classes, I have it set up such that you cannot remove an instance of those if there’s
    a reference to them in FoodComposition. If you want to see where/how I’m doing that, look at the code of the class FoodCategory, for example, and go to line 633, then read the code of that method named “Remove”.
    The one class in the bunch which is pretty much self-contained is the one called DietaryReferenceValue (DRV is the name you
    used). That one makes for a good topic to explain how I can provide methods which lend a helping hand to your controls but don’t, directly, have anything to do with controls.
    I have a method in that class named “GetAllGroupNames” which is a function that returns a string array containing the names
    of each instance’s group. That might be used, for example, if you wanted to show a ListBox or a ComboBox to allow the user to select one of the group names:
    Private Sub Form1_Load(ByVal sender As System.Object, _
    ByVal e As System.EventArgs) _
    Handles MyBase.Load
    Dim url As String = _
    "http://www.fls-online.com/VBNet_Forum/12-13-14/NutritionData.xml"
    GetNutritonData(url)
    ListBox1.Items.AddRange(NutritionData.DietaryReferenceValue.GetAllGroupNames(drvList))
    End Sub
    So, for example, when the user selects one of them:
    Private Sub ListBox1_SelectedIndexChanged(ByVal sender As System.Object, _
    ByVal e As System.EventArgs) _
    Handles ListBox1.SelectedIndexChanged
    Try
    If ListBox1.SelectedIndex > -1 Then
    Dim selectedGroup As String = _
    ListBox1.Items(ListBox1.SelectedIndex).ToString
    Dim drv As NutritionData.DietaryReferenceValue = _
    NutritionData.DietaryReferenceValue.GetInstance(drvList, selectedGroup)
    MessageBox.Show(drv.ToString, drv.SexAndAgeGroup)
    End If
    Catch ex As Exception
    MessageBox.Show("An error occurred:" & vbCrLf & vbCrLf & ex.Message, _
    "Program Error", MessageBoxButtons.OK, _
    MessageBoxIcon.Warning)
    End Try
    End Sub
    As you can see there, I’m using the .ToString method which I have overridden in the class. That’s also part of what I wanted
    to discuss: What it gets.
    Currently I don’t have much else (other than maintenance routines like adding, removing, renaming) in there; the methods that
    you use are methods that I set up – but in the words of Hamlet, “therein lies the rub” … I don’t know what you want!
    Give some thought to just what methods you might want to have in there. For example maybe you might want to have a method which
    will return the value of one specific nutrient which you specify. I can do that, I just don’t know yet that you want it so it’s not there.
    Quite often I’ll also provide what I’m come to call “convenience properties”. For example with the property named “Sodium”,
    I might have another property (read-only) named “Sodium_String” which returns a string in whatever format you wanted it to have.
    These are things I don’t know that you want and also things which you may not have known can be done, thus this writing. ;-)
    The other day I asked about units. It may not be where you want to go with this but I’d also like to offer that we can provide
    more granularity to the nutrients themselves. Don’t get me wrong, it’d be an overhaul of what I have right now, but I’ll do it if you want to proceed:
    Imagine that we have a class, all by itself, that we call “Nutrients”. At the very least that class would have members like
    Name and UnitOfMeasure, but it could have anything else you wanted. An example that comes to mind might be the URL to a page on Wikipedia about it, or maybe a URL to an appropriate image or … whatever you dream of here.
    So then when using them in the other classes, “Calcium” would, itself, be an object which has a name (“Calcium”), a unit-of-measure
    (maybe “milligram”), and so on.
    It’s a lot to take in all at once and even this is something you may want to reread, but do give it thought. Let me know what
    methods you want in the classes which will help you in your user’s program.
    Still lost in code, just at a little higher level.

  • I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning

    I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning but it never ends up doing anything. Please help me with this issue. I really need to get this project started like yesterday. Thank you.

    dplum12
    What computer operating system is your Premiere Elements 12 running on? Did you have the opportunity to update 12 to 12.1 Update yet using an opened project's Help Menu/Update? If not, please do so when you get the opportunity.
    For now I will assume that your computer is Windows 7, 8, or 8.1 64 bit. Please try the following suggestions to overcome your Premiere Elements Sign In issue.
    http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
    and, if you get any messages about Internet connect and the computer clock, please review the following
    http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
    Please let us know the outcome.
    Thank you.
    ATR

  • FCPX 10.1.3 Project vanishes when a new project is created in the same event

    I've been working on avery complicated project all day with multiple layered clips with key frame animations, colour effects etc. All was fine until I opened a new project in the same event which I was going to use to create some effects sequences for the main project. When I went back to the original project it was empty. Tried the Undo function in case I had done anything stupid but it was greyed out. Went to the FCPX backups and the last file was almost 2 hours old but did not have any sign of this project. The only thing I have left is all the imported media.
    Any ideas? Using FCPX 10.1.3. This is really annoying as all I have left is an h264 file of the almost complete project and it will be almost impossible to start from scratch.
    Thanks for your attention

    The edited project was 60 seconds making up an intricate title sequence involving 24 video segments and 48 png/ PSD files.  Had a brain storm and was wondering if there is anyway the the project could move to another event so currently going through all the event folders on my FCPX edit drive. I just can't see how a project can just vanish.
    Thanks for your suggestion.

  • When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

    When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

    When you move or copy the compound clips with their events into an external drive all the events should be there. Not clear on why you want to move them into a single event. You can drag and drop from one event to another.
    Why are you using compound clips? You can simply copy the project from each machine with used media onto the external drive and that should do it.

  • After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

  • New project won't work!!!!!

    everytime i start a new project and i try and drag  a title square or a pic from the factory box(the map for example) it won't let me drag it into the project. it just keeps going back to its original spot. it does the same with the music and everything. it won't let me drag anything into the project. i have tried deleting it and starting a new project. i just keep getting rejected. Can you please help me with this. its geting so annoying. I also just updated the Imovie along with OS X. PLEASE HELP!!!!

    Premiere
    It is important to let us know what version of Premiere Elements you are working with and on what computer operating system it is working.
    In this case, I know instantly what version you are using by the description of your issue - it can be no other than Premiere Elements 13 and its new Shake
    Stabilizer.
    In order to use the Shake Stabilizer in Premiere Elements 13, the properties of the file to be stabilized must match the description of the project
    preset.
    Do you have an assortment of formats on that Timeline? If not, then you (manually) or the project (automatically) has set the wrong project preset
    to match the properties of your one and only source media format.
    For further information, please see Item 0002 in the Premiere Elements Daily Discoveries blog.
    http://www.atr935.blogspot.com/2014/09/premiere-elements-13-daily-discoveries.html
    Please let us know if you are OK with the information above. If not, please do not hesitate to ask questions and to ask for clarification.
    Thank you.
    ATR

  • New Project Setting not working?

    Good Day, All..
    I am not getting the expected results when activating one of the new Project Settings in  10.0.7.
    The Setting is: "Control Change 7/10 controls Volume/Pan of channel strip objects"
    It seems as though it doesn't matter if i use Automation  -or-  MIDI Draw. The results are still the same. The channel strip controls respond (not the channel strip's device).
    Was especially hoping to use with Kontakt multi's.
    Anyone know the proper procedure for getting this to responde as expected?
    Thoughts / Observations ?
    Thanks.....  sls

    Make sure you are dealing with CC messages and not Fader messages.  If you create the MIDI automation and then change the setting preference it converts it from control to fader.  Look in the event list to confirm.  You'll also note two additional categories in the controller drop down of the piano roll inspector.  The two (Vol/Pan Automation) are fader messages.

Maybe you are looking for

  • How do I show table paragraph styles in keynote 6.1 (mac)?

    Hi community, I am tryying to apply changes to paragraph styles in keynote 6.1 (mac). But in the list which opens when i click in the triangle only the basis paragraph styles are seen. Any ideas how and whre i can find theses styles. Thanks slyrs

  • Adobe Dreamweaver CC quits on Startup without an error message

    So, I'm running version 13.2 on Mavericks and this has also been the case for versions 13 and 13.1. I've uninstalled and reinstalled several times and tried all of the posted workarounds - no change. In looking at Dreamweaver's package contents, the

  • What is the best way to import pictures from Lightroom 5 into FCP X

    What is the  best way to transfer pictures from Lightroom 5 into Final Cut Pro X?

  • Installing apps using itunes....

    I am unable to install apps on my iphone using itunes... My iphone ios and itunes both are up-to-date. When I sync my iphone with itunes then the sync stops after showing : 'Determining apps to sync'.... Please Help Me....

  • Not Reading ipod

    I have a problem with my mini ipod. I went to update it with songs so when i plugged to ipod in to update. i get this message saying " attempting to copy to the disk my name failed The disk could not be read from or written to." Everything is updated