New RAM Does Not Run At Correct Timings
Hey guys,
My package arrived today. Brand new OCZ PC3700 Gold Edition 1GB Dual Channel kit.
Before installing, I clocked back my CPU to default speed and set the memory frequency to Auto.
I stuck in the new modules and booted up. Booted in dual-channel, but only at 400MHz when they're DDR466. Strange.
I went into the BIOS and manually set the frequency to 466, and they booted fine. My CPU booted at 3.26GHz instead of the default 2.8, I assume because I have 1:1 ratio set and my FSB must keep up with the memory.
According to CPU-Z though, they're running at 2.5-4-4-10, when the website says they run at 2.5-3-3-7.
What gives? I thought they would run at their rated timings when they're at the default frequency.
Also, how do I know what timings I should use for different FSB speeds? I was planning on trying some overclocking tonight to see how far I should get, but I need to know what to set the timings at before I do so.
Also, what should I set the MAT to in the BIOS? he options I have are Normal, Fast, Turbo(MAT) and Ultra-Turbo(MAT). Does the MAT setting affect the RAM timings? In what way, exactly? The MSI website does not explain MAT in any great detail. Also, what should I set this at when I overclock?
Specs:
Intel Pentium 4 2.8e HTT @ 3.26GHz
Thermaltake Spark 7+ Xaser Edition A1715 CPU Cooler
MSI 865PE Neo2-PFISR motherboard (BIOS ver. 3.8)
2x512MB OCZ PC3700 Gold Edition Revision 3 Dual Channel Enhanced Latency DDR @ 466MHz
Maxtor 6Y120M0 120GB HDD 7200RPM SATA150 8MB cache
Built-by-ATI Radeon 9800 Pro @ XT 128MB DDR 256-bit @ 415/744 (Catalyst 4.12)
Arctic Cooling VGA Silencer Revision 3
Creative SoundBlaster Audigy2 ZS Platinum
Sony DDU1612 40x/16x DVD-ROM
Sony CRX230ED 52x/32x CD-RW
Enermax Noisetaker EG475P 470W PSU(+3.3V = 34A, +5V = 40A, +12V = 33A)
Windows XP Pro SP2
Ultra Dragon ATX Mid-Tower Case
SPD uses info programmed into the ram sticks to decide what settings to use for particular speeds. You can use a utility like Sisoft Sandra to see what is programmed.
Normal, Fast, Turbo and Ultra-Turbo are the performance mode settings. Fast and higher enable the PAT mode (see P4 Neo Unofficial Guide ). However, at FSB settings higher than 218, PAT becomes disabled. At settings higher than approximately 225, the 'lost' performance is regained. The settings themselves allow the bios to set progressively more agressive memory settings.
When you set the RAM speed to 400 instead of Auto, and set the CPU FSB at 225 or higher, a lot of ram that won't run in Ultra-Turbo at other settings is able to run.
As for the ram speed rating, it isn't the speed the ram runs at. It is the maximum speed it is supposed to be able to run at. When you set the ram speed in the bios, you are setting the speed it runs at when the cpu FSB is at 200. Increase the cpu FSB by 10% and the ram runs 10% faster.
Any time you increase the FSB setting, make sure you go to the AGP/PCI setting. It will be greyed out, but you can hit the enter key anyways. Then select the closest setting to 66/33 you can find. This will keep the AGP card stable and prevent data corruption problems with SATA drives.
Similar Messages
-
New S30 does not power up correctly
I have just received a new ThinkStation S30 that will not power on.
When the power button is pressed, fans spin and the lights on the front illuminate for less than a second. There are no audible beeps and the numeric display on the motherboard flashes 00 during the brief power on. The lights on the power supply and NIC are green at all times.
The vendor has replaced the motherboard and RAM. I've swapped out the power switch, power supply, external power cable and video card from a working S30 without any difference. All cables/connectors have all been reseated as well.
I'm at a loss as to what to try next.
Has anyone else seen and/or resolved this issue before?There are a couple of things you could try depending on your confidence level when messing with the system:
- Re-seat CPU (though if your motherboard was replaced, this was done at least once already)
- Inspect CPU socket for any bent pins
- Inspect underside of CPU for any obvious contamination on contact points
- Try swapping in another CPU if you have one
00 tells me the system isn't getting very far in POST at all, so it's something drastic. Seems like the CPU likely isn't executing code at all. I'm very surprised you're seeing the issue on two different motherboards.
If the above yields nothing useful, you could try to do a boot block recovery to system BIOS. It's possible BIOS was corrupted to the point that it's never going to POST. -
OS X Mavericks 10.9.3 Does Not Run Smoothly
Hi,
I just upgraded my iMac and MBP from the Mac OS X ML 10.8.5 to the latest OS X Mavericks 10.9.3.
The new system does not run smoothly.
No matter it's the iMac or the MBP, the screen freezes for a very short of time whenever I try to switch to a different running program(especially when I try to switch to other programs from the Safari).
So what's causing the problem? What should I do about it?
Thanks.
EdLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
REPORT DOES NOT RUN CORRECTLY , URGENT PLEASE HELP
Hi,
I am trying to run a report from visul basic screen, but it does not run correctly. Here is how I am running the report. There is a screen developed in VB This screen prompts the user for user id and password. Once it gets that, it connects to the oracle database and pulls out a column from a table. And passes that value as a parameter to the report. Now I am calling the the report for each individual value . There are 21 value being pulled out of the database and it invokes the report 21 times. So there are 21 report engines gets started. Is there a better way to do that ? Secondly when I pass the parameter , some parameters does not pass correctly I guess , because its not generating any out put . Like out of 21 may be 10 or 11 reports gets generated correctly but rest of the reports are blank. I debug the screen i saw that the parameter value is correct, everything seems good. But still the reports are comming blank. Any Idea why it is so ? The command line that i am using in VB screen is
Shell "C:\progra~1\ora95_2\bin\rwrun60.exe P:\Business_Analysis_&_Reporting_Tool\Test_REPORT_Templates\STORE_TYPES\Baby_Distribution_Report.Rdf USERID=" & UID & "/" & PWD & "@cposp201 DESFORMAT=PDF DESTYPE=FILE DESNAME=" & txtPath.Text & Replace(strName, " ", "_") & ".PDF BRND='" & adoRecBrand!Brand & "' PRINTJOB=NO PARAMFORM=NO"
In the above command " adoRecBrand!Brand " is the parameter thats being passed. This is actually a recordset and brand is the column in it. When I debug the screen , I see the value also there. But the report comes out blank. Please help. This is urgent.
Thanks
FerozThe way you call reports is not scalable. If you have 100 records come back from database, you would end up launch 100 engines at the same times, which probably will blow up your machine. You should use oracle reports server to do that. You can either use rwcli60 to submit the job to reports server, or invoke rwcgi60 from URL.
I am afraid some of reports engine failed to start and you get nothing back in your case.
After switch to use reports server achitecture, if you still see some report is blank in your application, then you can run that report with that special set of parameters manually and see if any problem with the report itself.
Hope this helps.
Thanks,
-Shaun -
premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?
Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update. -
When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18
The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons -
List of games that are not running correctly or does not run in ICS update
I hope to start a list for apps (esp games) that does not run after the ICS update.
Kindly list the game name along with the error. Hopefully its not off topic.Since many of us having issues with gaming [both HD and Non-HD] after updating to ICS, so i decided to share a little bit of info regarding gaming performance in ICS.
For the gaming troubles we are not yet sure whom to blame? SONY, ICS or the Game developer.
1. Few game developers said that their 3D engine is not yet compatible with ICS.
2. No response from Google yet.
3. Sony was suppose to update their Graphics driver [Adreno] in ICS, so we were expecting better gaming experience, but in reality it declined. [Hoping to solve in 4.0.4, if SONY releases]
Remember Gaming performance and experience can be different depending on device, application version etc. Results stated below may not be same for all.
Few Gaming updates from different users:
# Angry Birds Space : For some it worked/some not working [Worked for me]
# Temple Run : Touch Control issues [ Game Developers said that their 3D engine is not yet compatible with ICS]
# Fruit Ninja: Some reported it lags. The speed of movement is slow.
# Asphalt 6HD : Works but some weird lines appears in the screen.
# NOVA 2 HD : Runs for 2-3 mins then force closes.
# Backstab HD : Runs for 2-3 mins then force closes.
# Dead Space : Working well till now.
# MW3: Working.
# Fifa 12 : Not working for me.
# Shadow Gun: Not Working.
Now it was advised that you must use the latest version of the games available in Google play store. The version worked in Gingerbread may not work in ICS. So it is recommended that you download the latest version of the games you want to play in ICS.
**Before Downloading you can also contact the developers if the games has any compatibility issues with ICS or not.
Message was edited by: Auni -
Certificate does not contain the correct site name
Hello,
I have to make a midlet that connect to a tomcat 5.5.9 server with ssl.
I import the certificate whit tomcat alias in the wireless toolkit but when i run the midlet this error appear: Certificate does not contain the correct site name
import java.io.*;
import javax.microedition.midlet.*;
import javax.microedition.io.*;
import javax.microedition.lcdui.*;
public class HelloNet extends MIDlet implements CommandListener , Runnable{
// User interface command to exit the current
// application.
private Command exitCommand = new Command("Exit",
Command.EXIT, 2);
// User interface command to issue an HTTP GET
// request.
private Command getCommand = new Command("Get",
Command.SCREEN, 1);
/// The current display object.
private Display display;
// The url to GET from the 'net.
private String url;
* Initialize the MIDlet with a handle to the
* current display.
public HelloNet() {
url = "https://127.0.0.1:8443/Hello.txt";
display = Display.getDisplay(this);
* This lifecycle method should return immediately
* to keep the dispatcher
* from hanging.
public void startApp() {
showPrompt();
* Display the main screen.
void showPrompt() {
String s = "Press Get to fetch " + url;
TextBox t = new TextBox("Http Result", s,
s.length(), 0);
t.addCommand(exitCommand);
t.addCommand(getCommand);
t.setCommandListener(this);
display.setCurrent(t);
* pauseApp signals the thread to stop by clearing
* the thread field.
* If stopped incorrectly, it will be restarted from
* scratch later.
public void pauseApp() {
* destroyApp must cleanup everything. The thread
* is signaled
* to stop and no result is produced.
* @param unconditional is a flag to indicate that
* forced shutdown
* is requested
public void destroyApp(boolean unconditional) {
* commandAction responds to commands
* @param c command to perform
* @param s Screen displayable object
public void commandAction(Command c, Displayable s) {
if (c == exitCommand) {
destroyApp(false);
notifyDestroyed();
} else if (c == getCommand) {
Thread th= new Thread (this);
th.start();
* Read the content of the page.
public void run() {
TextBox t = null;
StringBuffer b = new StringBuffer();
HttpsConnection c = null;
InputStream is = null;
try {
int len = 0;
int ch = 0;
System.out.println("Cerco di leggere");
c = (HttpsConnection)Connector.open(url);
c.setRequestMethod(HttpsConnection.GET);
is = c.openInputStream();
// length of content to be read.
len = (int) c.getLength();
if (len != -1) {
// Read exactly Content-Length bytes
for(int i=0; i<len; i++) {
if((ch = is.read()) != -1) {
b.append((char) ch);
} else {
// Read until connection is closed.
while((ch = is.read()) != -1) {
len = is.available();
b.append((char) ch);
t = new TextBox("Https Result", b.toString(),
b.length(), 0);
} catch (Exception e) {
e.printStackTrace();
String s = e.toString();
if(s != null) {
t = new TextBox("Https Error", s, s.length(),
0);
} finally {
if (is != null) {
try {
is.close();
} catch (Exception ce) { }
if (c != null) {
try {
c.close();
} catch (Exception ce) { }
display.setCurrent(t);
}re: code tags, please see http://forum.java.sun.com/help.jspa?sec=formatting.
As for the rest:
See, we now know that you used keytool to generate you certificate. You need a new certificate. This time, when keytool asks you for a first and last name, type 127.0.0.1. -
HP Officejet 6000 Wireless - Does not print black correctly.
HP Officejet 6000 Wireless - Does not print black correctly.
Previously the printer was printing fine.
This evening I printed a diagram I made in MS PowerPoint. The diagram contained black and red text along with black, red, and blue lines. When I took the printed page from the printer, all the black items looked faded. Instead of black, they printed as a light, faded gray. The red and blue printed correctly.
Another user of the printer printed some documents around the same time. These documents had nothing but black text. Every page this user printed showed up completely blank. The black was not even faded. There were no signs of anything being printed on the pages at all.
It seemed strange that one print job would print faded black and the other printed nothing. Considering the possibility that the ink was low, a new black cartridge was placed into the printer. The exact same results occured. My diagram printed correctly except for the fact that the things that were supposed to be black were coming up as light gray. Once again, the documents printed by the other user came up completely blank.
I ran a print test on the printer. It printed a Windows logo with the word "Windows" below. The logo printed correctly. The text showed up as a light, faded gray.
A third user printed an Excel spreadsheet. The cell borders were printed as a light gray. Nothing else printed. Everything in the spreadsheet was supposed to be black.
The third user also printed a recipe from MS Word. Most of the text showed up as a light, faded gray. Some text did not show up at all. I could not see any correlation between what showed up in faded gray and what did not show up.
It seems to me that if something was wrong with the cartridges, it would either always be faded or not print at all. I can consistently get some things to print faded and other things to not print at all. Color always prints correctly.
The print jobs were sent to the printer wirelessly from three different computers. Two computers run Windows 7 (x64). The third computer runs Windows XP SP2.
As far as I can tell, nothing was changed or done differently between now and the last time something printed correctly.
Might this be a driver issue? Since the printing consistently prints one way for certain files and another way for other files, I don't see it as being caused by hardware. If it's not a software issue, what could possibly cause the effects I described above?This article should help resolve your partial/blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
My adobe captivate6 installs but does not run on my windows7 dell inspiron
my adobe captivate6 installs but does not run on my windows7 dell inspiron with 4gb ram and 500gb hdsk, i downloaded the trial first 32bit and it installed fine and didnt run. so i thought that a full version with a 64bit installation will do the trick, but after that the captivate 6 did not still work on my system. i also tried it on an acer with duo core and the captivate software installed and did not still work. it only shows the captivate flash screen.
a friend installed his on an acer laptop 64bit, i3processor, and it works fine. please i will be glad if i can be helped on how to correct this
thanksHave you tried right clicking on the Cp icon and selecting Run as Administrator? This is something you MUST do in Win7 but was not necessary on Xp.
-
[ethernet] eth0 connection does not run
My ethernet connection does not run! This is the reply from ifconfig:
$ ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:23:8B:FD:F5:48
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:47244640245 errors:283467841470 dropped:94489280490 overruns:47244640245 frame:236223201225
TX packets:47244640245 errors:188978560980 dropped:0 overruns:47244640245 carrier:94489280491
collisions:236223201225 txqueuelen:1000
RX bytes:47244640245 (45055.9 Mb) TX bytes:47244640245 (45055.9 Mb)
Interrupt:27
So my computer is connected, but all messages are dropped or in error.
Does somebody knows how to solve that problem, please.
Last edited by rafmav (2009-12-14 08:16:20)Thanks for these replies! and fast!
I am not connected with a hub or a switch: it is a MODEM/ROUTER TrendNet TEW435BRM which goes well for DSL.
I cannot run dmesg for know... I will look in it later.
The computer is a new laptop (netbook type): Acer Aspire 1410 722G25n, Intel Celeron Mobile processor 723 (1.2 GHz, 800 MHz FSB, 1 Core, 64 Bits, 1M cache..., 10Watts max...), VGA: Intel GMA 4500MHD UP to 732 MB DVMT, 11.6" HD LED LCD
RAM: 2 GB memory, STORAGE: 250 GB HDD, WLAN: Acer Nplify 802.11b/g/Draft-N,
BATTERY: 6-cell 4400mAh Li-ion, SE: Windows Vista Home Premium OEM (EULA refuse by myself and deleted so not tested with it!).
$ lspci
01:00.0 Ethernet controller: Attansic Technology Corp. Device 1063 [1969:1063]
On the internet, some said that it is known as an Atheros AR8131 PCI-E Gigabit under Windows... and that the useful linux package is AR81Family-v1.0.0.10.tar.gz for them, but impossible to find on the internet (official site is down, the archive found elsewhere do not uncompress, etc...)
Linux is archlinux x86_64. The kernel driver in use is "atl1c" (on my ASUS eeepc beside, it is atl2 and runs well).
Ok, so:
- 1 read dmesg
- 2 try with another cable (the wire I used is old).
- 3 try with another kernel driver (have to find it)
- 4 send back the computer to be repaired!
Bye
Last edited by rafmav (2009-12-14 13:17:21) -
How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?
The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test. -
The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, items post exactly 4 hours earlier than the correct time on my Yahoo Calendar. My i4S is in the correct New York time zone. Help?
I posted this question a while ago and didn't receive any responses but there are a lot of people who have viewed it and 10 have said they have the same question so I thought I would update you that I added my nanny to my exchange server account (created an email for her) and I send all invites to that email address and they work. So sending invites from an exchange server account to a non-exchange server account apparently is a bug so to solve it, get on an exchange server I guess.
-
Add does not run with sql server 2008
Hi all,
My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
is installed.
Help needed.
Thanking you
PradnyaHi Use this
Dim i as integer
i=oCompany.Connect()
if i<> 0 Then
msgbox(ocompany.GetLastErrorDescription ())
end if
the you will get the error description also use try catch wherever necessary
Alternatively you can use
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
Set SboGuiApi = New SAPbouiCOM.SboGuiApi
sConnectionString = Command
SboGuiApi.Connect sConnectionString
Set SBO_Application = SboGuiApi.GetApplication()
Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
ocompany = SBO_Application.Company.GetDICompany
HTH,
Atul -
I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired (errors were associated with boot drive) I erased the drive and restored system back to the previous day. Has anyone else experienced this problem?
Since it's a new machine, contact Apple's Support and let them deal with it. Allen's already recommended an Apple repair station visit. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you might be eligible for an onsite repair since yours is a desktop machine (depends on where you're located). BTW, the AppleCare Protection Plan's the best warranty policy available for desktop machines. Get it if you don't have it before contacting Apple.
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2
Maybe you are looking for
-
Why does my macbook run so slow?? I am running OSX 10.8.4
I am running OSX 10.8.4 My Macbook pro is running extremely slow. It takes a while to power down. web pages do not pop up automatically like in the beginning. What can i do to get my laptop back to fresh out the box performance??? This is getting irr
-
How to hard code values in drop down by index
Hi everyone I hav a node containing 2 attributes ie value n key. I am using drop down by index. Value attribute is bound to my drop dwn box. In key I am providing key value for the value. I need to hard code 3 value..Can anyone help me how to do so
-
How to Install Solaris for Intel so that it boots off from a boot floppy?
Hi all, Sorry to bother you with this one (I went through all documentations/manuals and could not find straight answers to following specific questions): I have one hard drive with 1st partition used by Windows XP and a second partition that's a bla
-
**** Bluetooth and keyboard issues after latest itunes and 10.6.5 update.-
read below Message was edited by: Paulman!
-
Message Popup dialog box - "Value invalid or out of range"
Hi From time to time I get an error when trying to display Message Popup dialog boxes. The error appears sporadically and always disappears when I restart TestStand. This happens for all Message Popup dialog boxex (TS standard box). The error is "Val