New row SyncBo and new SyncBo reinstall

Hi, i add a new row in a SyncBo1 and create a new syncBo2. I create a new war application with the new xml and i assign at the webconsole. If i install in the tables, is neccesary to reinstall the application? Or can i reset client with the botton in settings menu? Or are there another better way to install the application without the reinstall application ? Thanks and regards.

Hi Julian,
if you change a SyncBO it gets problematic.......
As long as you just change the GETLIST/GETDETAIL code as such in the backend and do not change the IMPORT/EXPORT/TABLES parameter, then SyncBO definition on the middleware stays untouched. In that case you can life with two different versions of the APP - both use the same MEREPMETA.XML file.
If you really need to change the SyncBO but want to keep the old APP - you need to implement a new SyncBO and keep the old one. For example you use Z_SYNCBONAME and Z_SYNCBONAME_A where the .._A is the new one. In that case both apps can stay beside each other, cause both have their own syncBOs. Even APP A with SyncBO A,B,C and App B with SyncBO A,C,D,E,F is possible. A new version of an App is the same as a new App - in the definitipon above.
So if you have changed the app and the SyncBO - you can use Victors approach, but you have to use the RESET CLIENT functionality on the settings screen, to init the new BOs.
If you want to deploy this app to the clients - well, just assign them to the devices in the NWA and delete the old app. this will then do these steps at next sync. Problem: restart of MI is recommended! but the SyncLog tells you that - so it is not really an issue - hopefully.
Hope that helps!
Regards,
Oliver

Similar Messages

I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
1. Revert back to Snow Leopard.
2. Purchase FCP X...
if you can't stand FCP X
3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
I just got FCS 3 today through apple phone sales..

My husband bought a new ipad and he created a new apple id and new password etc, now he wants to have all his pictures from his old Ipad that it was created on a different ID or Icloud id. How can i get the pictures?

My husband bought a new Ipad Mini and he created a new Apple ID and new password for him, but his old Ipad was under my Apple ID and Icloud too. Now he wants to get his pictures from Icloud to his new Ipad, What do i need to do?

You can use a wireless flash drive.
Copy from old iPad > wireless flash drive > copy to new iPad
http://www.sandisk.sg/products/wireless/flash-drive/

New Document Types and new Number Ranges

Hi,
Plz tell me How to configure New Document Types and new Number Ranges for Services and Asset Purchases.
How can i maintain Services with or without Master data.
Plz tell how much services are there and how to configure step by step

Hi
New document type can be configured in SPRO - SAP IMG- Material management - Purchasing - Purchase order - Define number rabges / define document types.
With out service master straightaway you can create the Service PO with account assigment.
AC03 - Create service master record.
ML10 - Model service specifications
Then Service conditions ML33 or ML39 or ML45
Create the PO and then do the service entry in ML81N
Regards,
Raman

Why when i use a new apple Id and new id for icloud all my information is gone? For example all my contracts are all gone.

I don't know why when i used a new apple ID and new icloud ID all my information is done. My contracts are all gone. This only happen on on phone. When i was changing the other phones it works fine. Nothing is lost. So i dont understand when i was changing the apple ID and icloud Id the information is lost. You know when you go to setting and you click iCloud and i saw that the contracts book was light on. Does that matter? Does that cause i lost my contracts?

I don't think the iPhone is really designed for people to be switching from one Apple ID to another so when you do so you may experience problems. You have two options on the iPhone for where you can be accessing contacts, from iCloud and the iPhone itself. You can also pull contacts off of a SIM card but they are then stored on the iPhone and not accessed from the SIM card.
You could try this;
1. Go to Settings > iCloud
2. Sign in to the Apple ID that you want the Contacts from,
3. Turn "On" the Contacts slider and let it download all of your contacts
4. When it's done downloading, turn the slider back to "Off" and you should get a message like this..."What would you like to do with the previously synced iCloud contacts on your iPhone?"
5. Then select "Keep on My iPhone"
Then after that you can then sign out of that Apple ID and into your other Apple ID and the contacts shouls still be there.

Officejet 8000 - Printer says out of ink even after installing new ink cart. and new head.

My Officejet 8000 - Printer says "out of ink even after installing new ink cart. and new print head. I have tried two new cart. and still gives me the error. A few times it will show all inks are full and print a page or two then says it is out of ink. At one point I even was able to clean the heads and align them but same thing occurs. What is wrong??

Hi Lee_S
Try printing a Self Test Page and see what the Cartridge status & Printhead status is like.
Printing a self test page
Please let me know how you get on..
Thanks, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. They will help you.
Best.

Need 10.7 to sync my new iPhone 5 and new iPad 4 with my Mac Book Pro, but it's 10.5.8? What do I do?

I need OS 10.7 to sync my new iPhone 5 and new iPad 4 with my Mac Book Pro, but my MBPro has 10.5.8? What do I do? I want to fix my problem now, but it wants me to purchase the Snow Leopard software and wait for it to be delivered. Why can't I purchase it and then download? Any ideas?

Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

HT204088 I forget my answers security question how i can rest new security question and new answers?

I forget my answers security question how i can rest new security question and new answers?
I know the password but i forget the answers of security questions

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                         Apple ID- All about Apple ID security questions.

Setting up Air play with new time capsule and newer airport express?

I just recently purchased a new time capsule, and I'd like to use my current generation airport express to stream music from my apple devices. I just was wondering what I had to do in airport utility to set this up? I was also wondering how to transition the network over from the old express to the new time capsule as far software settings go. I really appreciate the help and assistance. Thanks folks. I'm really looking forward to setting up the network for our new iMac.

Your setup is very easy..
This is how I would do it.
Remove the express from the network.. ie just unplug it but do not change anything in it. Keep the configuration as is until the TC is working.
Power off the cable modem.. this is requirement.. at least 20min is usually needed, dependining on your ISP.
Go into the airport utility and setup the TC as router for your network .. it is a simple setup.. but I would do as stated.. all short names, no spaces pure alphanumeric rather than accept Apple's names. That is for TC and wireless.
After 20min power up the cable modem. Once it is running and you have internet access. you can proceed to setup the express to do the airplay. If the internet still doesn't work, power off the cable modem overnight..
Do not lose that express setup so if you absolutely have to, you can at any time substitute it back and have internet again.
So everything is working properly TC in place as full router.. now hard reset the express.. and simply use the airport utility to put it in extend wireless .. or plug in by ethernet if you are going to hard wire it.
The extend wireless setup is all done straight from the existing setup.
Now you can plug your express audio port into your speaker.. and setup the airplay via the itunes.
I will get Bob to give you his way of doing it.. There is no one RIGHT way .. but he can give you more info if you want a particular method.

New magic mouse and new rechargeable batteries aren't at %100....

Hi, my new rechargeable batteries and charger aren't showing that my batteries are anywhere near %100 powered. I've let the batteries charge overnight and when replacing them in both the mouse and the keyboard they've shown at max 75% battery level. What's up with that?
Also, this is the battery kit from Apple.

that's completly normal because rechargables don't work the same way as batteries do. 75% is a good value in my experience.
besides that, you might also notice that the % jump around a little and that the last 20% or so drain very fast

Reg. New material type and New movement type

dear Friends
For what reason we need to create new material type and movement type ? this quesition is frequently asked by interviewer,but my answer is not exactly correct. Please tell me, why we are create newly. already I posted this quesition and got reply but no satisfaction with that.
Thanks in advance
Rajakumar.K
*Note : Interview questions were not allowed in forum,Search forum before posting,lot of answered
threads already available*
Edited by: Jeyakanthan A on May 26, 2011 10:57 AM

Hi,
New Material type is required to meet various business functionalities of client. Depending on user department views required by client, field selection key required, wheather quanity and value updation is required or not and if so under which valuation area its required, wheather the business wants to have default value of price control in material master, number range intervals to be used and wheather its internal/external, account determination process etc are some controlling functions which may force a business to create customised or new material type.
Similarly new movement types can be created when the controlling features of the existing movement type do not match the requirement like wheather any movement type is required to move goods from GR valuated stock ( as an illustration), wheather auto PO/Auto storage location needs to be decided automatically, new account grouping and field selection procedure to be used etc are some controlling functions. As an illustration in earlier version of ECC 6.0 there was no movt type like 107,109 etc but since most of the business wanted to valuate stock when goods movement will occur from GR valuated stock , the above movt types was introduced in ECC 6.0. Thus business justification and understanding should be concrete to create new movt type.

Problem to use new abap editor and new abap debug.

HI experts.
currently using 640(patch 19) and GUI 640(patch 23).
but when I activate new abap editor in se80 server dumps error
' Runtime Errors MESSAGE_TYPE_X
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).'
and new debug does not activating even though I switch to new debug.
it works well both new editor and debug if I turn on new options when I connect ECC6.0 with same GUI
guess 640 server has not propery installed new editor and debug or something has to be checked.
can anyone help me to activating these new functions?
thank you.
Lee

There is a separate forum for the SAP GUI, please post your question over there and close this thread here.
Thx

Can I use the large AC charger from. my Ipad2 with my new mini ipad and new iphone 5 .

Can you use the larger and more powerful charger from the iPad 2 on a new iPhone 5 and mini iPad without worrying about to much charging power?
Thanx,
Bruce

Yes.

New logic board, and new display, but now completely dead.

Hi guys,
I've got an iBook G3, running 10.3.9.
In December 2006, the logic board failed, so I bought a MacBook, because I didn't have time to be offline waiting weeks for Apple to replace the iBook's logic board.
After much badgering, Apple reluctantly replaced the iBook's logic board under the extended warranty program.
While the iBook was with the Apple repair store, they replaced the display for new as well, even though I didn't ask them to, and even though I wasn't charged for it.
I presume that was because the store discovered that the display was duff enough to be replaced under another extended warranty program.
When I got the "repaired" unit home, with a brand new logic board, and a brand new display, I turned it on, and it seemed to be working fine, so I turned it off, and continued to use my MacBook.
A few weeks ago, the second logic board on my MacBook failed (another long horror story entirely), so I began using the iBook for the first time since it had been "repaired" some six months earlier.
Almost immediately, the iBook began exhibiting a major problem, specifically that I'd be typing away, and suddenly the display would go black.
I could just about see the icons and documents on the screen, but the unit was unusable.
So I pulled restarts, full shutdowns, disk utility, zapped the PRAM, etc, all to no avail.
It seemed to be an intermittent problem.
For example, sometimes, from a cold start, the unit would work for two or three hours until the display went black.
Other times, I'd pull a cold start, and it would go straight to the black display.
By chance, I discovered that if I gave the iBook a shake, the display would come back on.
But then it would go black after a second or two.
And then with another shake, it would come back on for a second or two.
And then it would go black after a second or two.
And then with another shake, it would come back on, sometimes for a couple of hours at a time.
So I figured that it must be a cable which, during the installation of the logic board, and/or the new display, wasn't seated correctly by the technician.
I phoned Apple, and told them about it.
They said that because I had reported the issue beyond 90 days since the logic board had been replaced, it was no longer Apple's problem.
I explained to Apple that I hadn't used the iBook for six months, because I had a MacBook.
After much badgering, Apple has agreed to replace the logic board if it's faulty.
However, Apple has refused to replace the NEW display, even if that's also faulty.
Apple is also insisting that I have to pay all the labor charges.
Meanwhile, I've noticed that the iBook is now incredibly hot.
I mean, the MacBook is infamous for running hot, but this "repaired" iBook makes my MacBook feel like a block of ice by comparison.
I don't remember the iBook running so extremely hot before the "repair."
Which has made me notice that during the last few weeks, I've never heard the iBook's fan come on.
I presume that an iBook has a fan ?
Please confirm.
Therefore, another loose cable ?
Today, the display went black again, as usual.
So I gave the iBook a shake.
But this time, nothing happened.
No display.
No fan.
No hard drive spinning.
Just silent and dead.
What do you reckon, guys ?
Duff logic board ?
And/or duff display ?
And/or duff fan ?
And/or duff cabling by the technician ?
As far as I'm concerned, I don't see why I should have to pay for yet another repair, to correct hardware and/or workmanship which was so bad that after only three weeks of ACTUAL use since the "repair", the unit is now completely dead.
All opinions and advice gratefully received.
With thanks and best wishes,
Michael
London, England

Hi S,
Many thanks for your helpful and swift response.
I agree with you regarding the likelihood that these problems would have surfaced immediately during normal usage, regardless of how much or little time had passed since the repair.
As advised, I will inform Apple Customer Relations UK about the new developments.
Indeed, when I resubmit the iBook, I'll include a print-out of this discussion.
I agree with you about the fan.
Prior to the failure of the first logic board, I ran that iBook for YEARS, without noticing any heat issue.
Indeed, if there had been such incredible heat, then I'd have searched these discussion boards, and reported it to Apple HQ.
Therefore, the astonishing heat is definitely a new development since the "repair."
Consequently, I take on board your comments about the lack of a working fan since the "repair", which I shall also mention to Apple HQ.
As for running the Apple Hardware Test, the unit is completely dead.
The power cable is green, but the unit is now completely silent and black.
I also note your suggestions regarding the cable which connects the display to the rest of the unit, which I shall also mention to Apple HQ.
No repair sheet was ever given to me by the Apple Repair Centre (ARC).
Indeed, no receipt was ever given to me when I delivered the unit to the ARC, nor was any paperwork ever given to me when I collected the unit from the ARC.
However, Apple HQ can see on their screen that the logic board and display were both replaced for new by the ARC.
What else was and wasn't done by the ARC is a mystery.
I'll phone the ARC and ask for copies of any and all paperwork, so that I can submit it all to Apple HQ, which I note is your recommended option, rather than returning the unit to the ARC.
However, the complicating factor is that with the exception of the logic board, it is my understanding that Apple is denying any liability on any part of the "repaired" unit, including the brand new display.
If I understand Apple HQ correctly, they're now saying that all other hardware and labor costs will be mine.
I'm sure I could buy a WORKING second-hand iBook G3 for the same price as a repair, if not cheaper.
Therefore, perhaps I should return the unit to the ARC, and give them the opportunity to correct their previous workmanship, at their OWN cost.
Because as far as I'm concerned, the ARC had two customers during the repair: Apple and the end-user, as evidenced by the fact that the ARC has invoiced its first customer Apple for workmanship which was clearly not up to Apple's own standards, and the ARC has then delivered the unit to its second customer, the end-user.
In addition, regardless of Apple's 90 day warranty on repaired hardware, UK law includes the Sale of Goods Act 1979, and other relevant legislation: http://www.dti.gov.uk/consumers/fact-sheets/page38311.html
Furthermore, if the ARC is completely unhelpful, I could jump all over them, by writing to Apple HQ, with cc's to the UK editions of MacWorld, MacFormat, and MacUser magazines.
As advised, if the unit goes to Apple HQ, I will suggest that the unit is looked at carefully during disassembly, to see if errors were made during the ARC "repair."
I'm always polite when on the phone to Apple, because I love the company so much.
Indeed, even though during the last twelve months, I've been having very bad luck with the iBook, as well as with a MacBook which has exhibited so many problems that Apple has now agreed to replace old for new, I still love my Mac.
And joy, sweet joy, I've just seen on the TNT courier's tracker website, that my replacement MacBook, built by Apple in Singapore, then flown to Arnhem in Germany, then flown to Northampton UK, then delivered to Heathrow UK, left the Heathrow depot 30 minutes ago, for delivery to the customer.
And the sun is shining.
Thank you again for all your kind and wise advice.
With best wishes,
Michael
London, England

New row SyncBo and new SyncBo reinstall

Similar Messages

Maybe you are looking for