New Sysfail Error during PR Transfer. FM BBP_REQUISITION_GETDETAIL not foun

Hello Friends,
We have moved onto the Production system and while transferring the first PR in the Prod system from ECC 6 to SRM (5.0 PL14) I am getting "sysfail" type error in outbound queue in ECC. The error details are "Function Module BBP_REQUISITION_GETDETAIL not found".
No trace exists in SRM system. (SMQ2 or SLG1). And all the connections between the 2 systems are working fine.
What can be the reason for this issue. Is it an SRM issue or ECC issue. (the FM exists only in ECC).
Any inputs would be of great help.
Thank you in advance.
Hussain.

Hi Muthu,
Can you please elaborate what exactly yu meant by logs on EPRTRANS table.
What else (Logs etc) can be checked on ECC side.
Regards
Hussain

Similar Messages

  • Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

    Dear SAP Expert:
    I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
    I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
    Please suggest me how to fix that kind of issue.
    "com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
    at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
    at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
    at SAPAdapter.execute(Unknown Source)
    at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
    at JavaAgent.NotesMain(Unknown Source)
    at lotus.domino.AgentBase.runNotes(Unknown Source)
    at lotus.domino.NotesThread.run(NotesThread.java:249)
    Thanks in advance! Your help would be highly appreciated! Thanks again!

    error is clear, check your abap code.

  • Printing dunning notices using SMARTFORMS,error during parameter transfer

    Hi Friends,
                    I face a error message "Include text ZGA_DUN_HDR does not exist (object TEXT, ID ST)" when i run the dunning run.
                    I had searched every node for text ZGA_DUN_HDR in the smartform,I didnt find the text in it.
    However when I execute the smart form for print preview an error message "Printing dunning notices using SMARTFORMS,error during parameter transfer".This error i believe is due to wrong parameter passing in the fm 'GET_SF_DUNN_DATA'.It raises an error no_parameters_found.All parameters are passed correctly.
                    Can you guys help me out.
    Edited by: RAJIV KAUSHAL on Nov 14, 2008 6:03 PM

    you can create this text ZGA_DUN_HDR  in SO10 tcode and try ...

  • Error during date calculation: Time entered not numerical

    Hi All,
    We are using SAP MI 7.0 SP18 Server and Client
    xMAM 3.0 SR06
    Now when we create a Notification using the link  Notification Management of type PV and SAVE.
    When Synchronized, it is completed but backend no notification is trigerring and when checked in Error Logs
    the following message is shown Error during date calculation: Time entered not numerical
    Kindly Suggest
    Regards,
    Kiran Joshua

    Hi All,
    I got to know how to edit the entries from merep_mon : Thanks to Chinna.
    But unfortunately that did not solve my problem
    I had to debug the function module of the respective SyncBO and found that the Profile type was not maintained in the backend.
    Infact the error "Error during date calculation: Time entered not numerical" was misleading.
    Anyways upon customising the Profile for the PJ and PV type Notifications that solved my issue.
    Regards,
    Kiran Joshua

  • HELP! brand new iMac froze during firewire transfer and won't start!!!

    During my setup for my brand new iMac I follwed the directions and connected my iBook via firewire to transfer my files. I noticed after a while that my iMac was frozen on "45 minutes remaining" and the blue line wasn't wavering a bit, and after over half an hour it hadn't moved. I powered off the iBook, and still nothing happened to the iMac screen--it remained frozen. I went to the guidebook and nothing seemed to work, so I powered off and on again, only to get a flashing question mark. All this and I just bought the darn thing tonight!
    Help! Anyone know what happened and more importantly how to fix it?
    Thanks.
    Lindsay

    it sounds like the iBook went to sleep during the transfer or at least it's hard drive spun down.
    what you need to know is hope that simply booting from your install DVD will let you repair the iMac's hard drive. You could also try booting holding down the Command S keys on startup and when you get to the Single User Mode command line prompt follow the directions there for running fsck to repair your hard drive.
    Do you have a FW hard drive? Can you copy files from iBook to FW and then from there to iMac?
    And, it is always nice to have a FW emergency/backup hard drive. The iMac needs a different partition scheme to be bootable from FW than the iBook does, but you can create the proper partition type etc from a Tiger Installer and put OS X on FireWire, then see if you can backup and repair your iMac's hard drive.
    MicroMat's TechTool Pro 4.5.1 is now shipping and is compatible, Universal Binary and bootable. Always good to have some 3rd party utility handy.
    If you are just starting out, you probably don't have much if anything installed yet, so you may want to just erase your iMac drive and restore to what it was. That would be the easiest if Disk Utility won't repair it.
    Instead of powering off the iBook, I would have tried to force quit whatever was running, like Migration Assistant.

  • Sysfail error during initial load

    Got sysfail error. Checked for shortdumps and found this
    MESSAGE_TYPE_X     SAPLCRMO
    'No external system (such as CRM) connected'
    Checked the RFC. Seems ok. Any idea?
    Get the parameters for the RFC conection.
        c_stshd-mass_queue = c_stshd-mass_data.
        PERFORM get_download_params_and_queue
                TABLES t_bapistructures
                USING c_stshd-objname
                      c_stshd-objclass
                      gv_destination
                      gv_rfc_queue
                      gv_server_release
                      i_bapicrmdh2
                      c_stshd-mass_queue
                      c_stshd
                      i_transfer_data
                      i_crmrfcpar
                      e_rfcoltp.
    Set variables
        e_synchronous_call = gv_synchronous_call.
    Raise an error if the destination of the foreign system could not be
    found. (Only during Initial Load, Upload, Compare and Requests).
        IF gt_rfcdest[] IS INITIAL AND
           NOT i_bapicrmdh2-ref_id IS INITIAL.
          MESSAGE x050(c_) WITH
                  'No external system (such as CRM) connected'(007).
        ELSE.
          t_rfcdest[] = gt_rfcdest[].
        ENDIF.

    The  RFC Destination for Replication & Realignment (Clt 000) isn't set because only the root admin has access to clnt000 and he's in vacation. Could that be the problem?

  • Error during goods issue-Posting period not open

    Hi ,
    I am getting an error during goods issue which says posting period not open.I guess that we have had deliveries that were created and in process while crossing over from one financial period to another quite frequently before, but we were still able to goods issue them in the next period. Can anyone tell me why this error happens and if there is any work around for this?
    Thanks,
    Hari.

    Hi,
    Goods issue takes place, say on a given date and this should be updated, so that the plant valuation changes are recorded. But the periods need to opened to do this. Normally there are two posting periods available, one is in MM, done by t.code MMPV and the other in FI, t.code is OB52.
    So, in MMPV we need have the current month as the posting period. But in your case it was allowing, probably because you have marked the indicator " allow posting in previous period " in MMRV t.code as our friend just conveyed.
    Hope it helps. Please reward if useful.
    Thanks & Regards
    Sadhu Kishore

  • SYSFAIL Error in SMQ2 - Transfer of material from R/3 to CRM

    Hi,
    We are using standard BDOC to transfer material from R/3 to CRM. BDOC Type is PRODUCT_MAT, Queue name is R3AD_MATERIA<Material No>.
    There are some queues which are struck in SMQ2. There are no struck queues in R/3. The struck queue has the status SYSFAIL and when I double click, it shows Message - Error in Mapping (Details: transaction SMW01)
    I checked transaction - SMW01. The queue name which is in SYSFAIL status is not coming up in SMW01.
    I do not understand whereelse I can see the detailed error message.
    This error does not occur for all articles.
    As I don't have sufficient knowledge in CRM and BDOCs, any pointers regarding the issue will be very much helpful.
    Thanks and Regards,
    Lakshmi

    Hi Lakshmi,
    Please follow as below:
    SMWP-Middleware Monitoring Cockpit- This transaction gathers a wide set of information about the status of the Middleware & Downloads in both the CRM system, the R/3. All statuses should normally be green but there may be some circumstances which stop this occurring. Expand the section Generation Information which refers to the generation of BDoc Types. Where ever you see error you can right click and Select Analysis Tool then right click and check the error.The log shows the error.
    SMQ2- Select a Queue and select Display. Queues connected to R/3 start with a queue name of R3A/D.
    Double click on the Status field i.e SYSFAIL. Reason will be shown.In your case it is u201CError in Mapping (Details: transaction SMW01)u201D. Then Continue and select a queue and select Display.You can see the Individual BDocs are beoing displayed.
    SMW01- give Bdoc Type as " Product_mat". If it is not displaying then I request you to check if all the objects are generated properly.This may also happen if the objects are not properly generated.Use tx-Genstatus. That will give you a list of error objects to be generated.
    Regards...
    Arup

  • Message error during a transfer order posting

    Hi,
    in WM, in storage type I set  "WM check based on palletization accord to SUT1" now when I post a
    transfer order the system replies with the following error message:
    Maximum quantity for storage bin A-011 will be exceeded by 1.000,000 KG
    I didn't set any max quantity for the storage bin
    Best regards

    Hi,
    no the problem of the maximum quantity still exists

  • Error during acquisition transfer: Depr. area does not exist

    Hi,
    I am getting following error while posting WBS through CJ88
    Message no. AAPO107
    Diagnosis
    According to the specifications for transfer variant 5, depreciation area 30 should be transferred gross. However, the recieving asset 3300053-1 does not manage this depreciation area.
    Procedure
    Check the transfer variant and the receiving asset.
    Can you please help
    Thanks

    This is probably a question best for the asset section but check the Depreciation areas tab on the asset AS03 and see if it has depreciation area 30.

  • Error during asset transfer: No depr areas for receiving revenue

    Hi....
    when I am posting an asset transfer transaction [Inter company transfer with transfer method 2: Net method] and simulating, I am getting an error message stating "No Depr areas for receiving the revenue". Kindly help me solve this error.
    Thanks
    Satya

    Hi....
    I am posting the transfer from with revenue details as NBV from depr area 01,  and using the transfer variant as 2 [Net Method]. Still it gives the same error.
    I then try posting a manual revenue and again it shows the same error.
    Finally, I use No revenue option, and it accepts. do not why this is happening?
    Kindly help.
    Thanks

  • Errors during file transfer on WebDav server

    (this is a repost from a different category)
    I having much difficulty transferring files to and from our new WebDav server when using Finder's Connect to Server. I am able to connect and authenticate just fine. Although, when dragging and dropping to a mounted drive, I receive the following errors, then subsequently dropped from the sever.
    ...Unexpected Error Occurred - Error code 1407
    ...cannot comple the operation because some data in "" could not be read or written - Error code 36
    ...Unexpected Error Occurred - Error code 1407
    This seems to be an issue affecting all 10.5 users in our university. PC's and 10.4 do not seem to be having this issue. When using CyberDuck and Goliath, I cannot login to the server whatsoever.
    Any thoughts?

    Attached is an upload link of log file
    These remind me why I like to use ProcMon to correlate and supplement
    all log messages. 
    FWIW I agree that clearing your SoftwareDistribution folder might change this aspect of your symptom description from setupact.log
    2013-12-25 07:32:52, Info                  DPX    CreateFileW failed, FileName:\\?\C:\Windows\SoftwareDistribution\Download\b3f099ae487c77fe455d9f17689e69a8\$dpx$.tmp\job.xml,
    Error:0x80070002
    It is really difficult "reading between the lines" to understand that one but I imagine it would be a lot easier having a ProcMon trace which showed exactly which file was "not found" (and whether it was the same one or a different one each time).  
    <eg>
    Robert Aldwinckle

  • Error During the Transfer of Asset

    Dear Experts,
    I am trying to retire an Asset through ABAVN, But its giving an error Message Viz..
    Partial retirement or transfer of prior-yr acquis. not possible                                                                               
    Message no. AA378                                                                               
    Diagnosis                                                                               
    You tried to post a retirement or transfer, based on quantity or        
         percentage, to asset acquisitions from prior years on asset 180000041 0.
         However, the system could not find any values.   
    I have checked the asset 18000041. Its a group asset and it has a Dep. Key attached with it. but the Depriciation has not happened so as a result there are no values of this particular Asset in Aw01n.
    Kindly help....
    Regards
    Om Prakash Gupta

    Hi All,
    I have already resolved the issue.
    If any one you face this kind of problem, go to ABZON, give the asset nos to retire. give the vaue as .01 to be posted a releveant transaction type and then save it.
    After that try to retire the asset. it will let you to do.
    Regards
    Om

  • "Action does not exist error" during country transfer action

    Hello, everyone.
    We are on ECC5.0 with MGE.  Recently our users are getting an error - "Action does not exist on mm/dd/yyyy" when they perform a country transfer action (transfer from country A to country B).  Because this is a hard error, the action is stopped and our users have to re-execute it.  Surprisingly, the action works fine for the second time. 
    The error comes from message class PG no. 022 in the Include program MP000040.
    We raised this issue to SAP but all they told us to look into our user exits.  We were told to remove our exits entirely to see the error happens.  The problem is that this error does not happen each time.
    Has anyone experienced this error?  If so, does anyone know why this is happening and how to resolve it?
    We tried to debug the code step by step and came across CPREL is filled with "02" in OBJPS for infotype 0000 in the program FP50MF10.  We have no idea as to how the OBJPS is filled with a value.  Infotype 0000 is not supposed to have this field populated.  We think this is the root cause of the error.  But why does it happen?
    Any help will be greatly appreciated.
    Regards,
    Noriko

    Hi.
    We use both PBAS0001 and HRBAS00_CCHANGE.
    Noriko

  • Error during requisition transfer for PDP

    All,
    when we try to transfer requisition from Back end ECC 50 to SRM 50, the transfer stops in the outboud queue of ECC with an error message 'ANORETRY'. In SRM, in the application log SLG1 I see an error message 'No partner number found for Partner <plant>". Have any one of you faced this problem. Any help would be appreciated
    thanks,
    Siva

    Hi,
    We too where getting the same error when we try to transfer requisition from Back end R/3 4.7 to SRM 5, the transfer stops in the outboud queue of R/3 with an error message 'ANORETRY'. In SRM, in the application log SLG1 I see an error message <b>'No partner number found for Partner <plant>".</b>We applied the note 801133 but after applying the note we still get in the outboud queue of R/3 with an error message 'ANORETRY'. In SRM, in the application log SLG1 I see an error message <b>" Transaction Type for Local system missing"</b>
    Note-We have maintained Transaction Type as SHC in the attribute.801133 HAS HELPED IN RESOLVING ONE ERROR BUT IT HAS CREATED ANOTHER ERROR
    Did u come across same error after applying 801133.How did u resolve it.

Maybe you are looking for