New to Oracle 10g

Hello,
I have previously been working with Toad on Oracle 8i, now I have installed Oragle 10g and I am hoping to learn the built-in oracle tools. But it seems I can't get a good grip on how they work. I'm trying to find a tool where I can browse my tables and tabledata. And aslo my procedures, snapshots and views etc. Is this possible without a third party application such as Toad? Any good oracle tutorials out there?
Thanks in advance.
I'm using 10.1.0.2 on Windows.

Hi, SQLdeveloper can suit you
http://www.oracle.com/technology/software/products/sql/index.html
Regards

Similar Messages

Oracle 10g RAC - Private Interconnect on Private non-routable VLAN

In our data center there is an existing Oracle 10g RAC configured with private VLAN for Interconnect administered by a different group of DBAs.
We are designing a new, separate Oracle 10g RAC environment to support our application.
When we discussed with our data center folks to set up a private VLAN for our RAC Interconnect, they suggest to use the same existing Private VLAN used by other Oracle RAC configurations. In that case the Interconnect IPs will be on the same subnet as other Oracle RAC configurations.
For example, if
RAC1 with 2 nodes is using 192.168.1.1 and 192.168.1.2 in the VLAN_1 for the Interconect, they want us to use the same VLAN_1 with Interconnect IPs 192.168.1.3 and 192.168.1.4 for our 2 node RAC.
Is Sharing same subnet on the same Private VLANs for interconnects of different RAC configurations supported?
Will that cause any performance hit? That means the Interconnect IPs of One RAC configuration is pingable from other RAC configuration.
Did anyone come across such a design?
Could not find any info on this on Metalink.
Thanks

yes
this is practically very much feasible.. as you would have only 4 m/c in ip subnet .... and this is very much less than the public subnet which we should refrain from using from interconnect.

Running Multiple queries in Oracle 10g Express Edition! Help Me!

I am new to Oracle 10g Express Edition.
I used my browser to navigated to http://127.0.0.1:8080/apex
I saw the database page.. logged in.. went into the SQL section.. now am not able to run two or more queries at the same time.. i have given a screenshot too. Plz.. check it and reply me quickly..
http://i71.photobucket.com/albums/i149/prasanna7287/546895215.jpg
Help me plz..
Prasanna.

There are two possibilities:
1) Run the SQL commands, one command at a time;
2) Create a script of multiple commands, and run the script.
These are discussed in some detail in the online documentation at http://www.oracle.com/pls/xe102/homepage
In particular, look at
http://download-east.oracle.com/docs/cd/B25329_01/doc/appdev.102/b25108/xedev_sql.htm#BJEIEIFJ
Message was edited by:
Hans Forbrich
No ... wait ... please do not read the documentation! <g>

Problem to connect between Oracle 10g xe and VB2010 at Vista sp2

Introduction
Hi guys, good day... NEED RESCUE!! SOS!! Hmm.. i have trouble been 1 weeks trying connect between Oracle 10g xe and VB2010 on window vista sp2. Actaully im very new at Oracle 10g xe and VB2010 but i got a project is going to build up system database and i figure out Oracle 10g xe and VB2010 can use free so i just chows these appication to be my project. I been search around internet and there is several things i was found about the connection but i has try and tried still it wont work out.
Things i found and learned
Oracle
1. I have download Oracle 10g XE and installed in my windows vista sp2.
2. I notice the Oracle Developer Tools is needed for VB2010 (To add reference 'Oracle.DataAccess'). So i was downloaded ODT11beta and installed
3. I also edit TNSNAMES to following below:
OraDb =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
4. My sqlnet like following below:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
5.I have try tnsping OraDB and its works.
6. I monitoring task manager and OracleServicesXE is running.
7. ora_dba is added in Group.
Problem in SQLPLUS
When i try connect SQLPLUS in cmd i get ERROR: ORA-12560: TNS:protocol adapter error.
i . In cmd i type sqlplus and enter then i been ask for username and password.
ii. After i insert my username and password and enter then i get the error of ORA-12560.
Visual Basic 2010
1. First i created my project, drawing label and button for test connection.
2. Then, i add reference Oracle.DataAccess into my project.
3. I type following script into my vb form:
Imports System.Data
Imports Oracle.DataAccess.Client
Imports Oracle.DataAccess.Types
Public Class Logon
Private Sub cmdLogon_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdLogon.Click
Dim oradb As String = "Data Source = OraDb; User Id = system; Password = shin;"
Dim conn As New OracleConnection(oradb)
conn.Open()
Dim cmd As New OracleCommand
cmd.Connection = conn
cmd.CommandText = "select SName from Staff where SName = shin"
cmd.CommandType = CommandType.Text
Dim dr As OracleDataReader = cmd.ExecuteReader()
dr.Read()
lblOra.Text = dr.Item("SName")
conn.Dispose()
End Sub
End Class
Problem in VB2010
When i run my project and press the button i get error message ORA-12514: TNS:could not resolve the connect identifier specified at conn.Open()
Extra Question*
1. Im notice in my netbook xp home sp2, before i install ODT11beta my sqlplus look fine thought cmd but after i installed ODT11beta its same problem with my Vista sp2 now. Get error ORA-12560: TNS:protocol adapter error :( I tried uninstall ODT11beta again and restart its work fine again. Which i really dun understand. Izzit the version ODT11 is not suitable for 10g xe? And i dunno this problem is related with my connection between oracle 10g xe and vb2010 or not. So confuse@@
2. I wish to know more about connect between Oracle and VB, is there still a things i miss?(I mean steps or configuration that should i done)
3. Or i just lower my VB version could make more easy? If yes, what version VB should i use that could work out with oracle 10g xe?
4. Sorry for too bad my english but i really wish somebody could help me. Please try to understand my written or you could ask me mean if dont understand. Im stuck!! Stuck feel not really that good.....
Edited by: user9173084 on Jul 19, 2010 3:34 AM

Huhu..
Yo, henry
I thought the OraDb is just a name for entry but im not sure it is a service. I was refer http://www.oracle.com/technology/pub/articles/cook-vs08.html at topic Connection Strings and Objects.
Here is my lsnrctl service
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOW has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOW has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 state:ready
DISPATCHER <machine: SHIN-PC, pid: 1932>
(ADDRESS=(PROTOCOL=tcp)(HOST=shin-pc)(PORT=49158))
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "xe" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
Izzit ok? I notice there is no listed OraDb. but tnsping OraDb seem fine.
Actually there is somethings as a newbie i wondering long time alreadly ><
1. The origin of tnsname.ora is no OraDb or ORCL but i just simple add it by open tnsname.ora with notepad. Im just not sure it is function or not.
Also please check at my TNSNAME.ORA:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
OraDb =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
I got the feeling there is so close~~~!!!

Can I import a tablespace into Oracle 10g Express Edition

I am very new to Oracle 10g Express Edition. We have a server running Oracle Enterprise Edition and we have been creating a transportable tablespace to be imported into a few servers. This works fine for us. I would like to find out if I can import the tablespace into Oracle 10g Express Edition. Someone told me that I should be able to do that but I have no clue to how to do it. If this is possible, can someone tell where to find the information how to do this.
Thanks,
RJ

I finally tried it and I got the following errors:
IMP-00017: following statement failed with ORACLE error 721:
"BEGIN sys.dbms_plugts.checkCompType('COMPATSG','10.2.0.2.0'); END;"
IMP-00003: ORACLE error 721 encountered
ORA-00721: changes by release 10.2.0.2.0 cannot be used by release 10.2.0.1.0
ORA-06512: at "SYS.DBMS_PLUGTS", line 2004
ORA-06512: at line 1
IMP-00000: Import terminated unsuccessfully
Am I right that the server that I exported the tablespace is using Oracle 10.2.0.2.0 while Oracle Express is 10.2.0.1.0? I looked around and I did not see Oracle Express version 10.2.0.2.0 that I can download. Is there a patch or something to upgrade it?
Thanks,
RJ

How do I connect from Crystal Report version XI to Oracle 10G express?

I'm new to oracle 10G express and I'm developing an application that needs reports to preview some data from oracle tables.
The oracle database is installed on the server and I installed the client on my machine. I need to use the crystal report 11 to report the output. Thus, I designed a crystal report that should simply read a table on oracle and though I need to be able to connect to the oracle 10G Express Edition database. I tried to create a connection from the crystal report using the Database Expert >> Create New Connection >> Oracle Server and I include the following parameters.:
- Service: host:1521/XE
- Username: username
- Password: password
Then when I tried to connect the crystal report crashes always.
Is there any way to create a connection to the Oracle Database 10G express from Crystal Report 11?
Please advise...

Thank you bala,
First, How I should start the Listener on the database server?
Listener.ora content:
SID_LIST_LISTENER =
+(SID_LIST =+
+(SID_DESC =+
+(SID_NAME = PLSExtProc)+
+(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)+
+(PROGRAM = extproc)+
+)+
+(SID_DESC =+
+(SID_NAME = CLRExtProc)+
+(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)+
+(PROGRAM = extproc)+
+)+
+)+
LISTENER =
+(DESCRIPTION_LIST =+
+(DESCRIPTION =+
+(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))+
+(ADDRESS = (PROTOCOL = TCP)(HOST = Daoud-PC)(PORT = 1521))+
+)+
+)+
DEFAULT_SERVICE_LISTENER = (XE)
How to configure the tnsnames.ora on the client side?
tnsnames.ora content:
XE =
+(DESCRIPTION =+
+(ADDRESS = (PROTOCOL = TCP)(HOST = Daoud-PC)(PORT = 1521))+
+(CONNECT_DATA =+
+(SERVER = DEDICATED)+
+(SERVICE_NAME = XE)+
+)+
+)+
EXTPROC_CONNECTION_DATA =
+(DESCRIPTION =+
+(ADDRESS_LIST =+
+(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))+
+)+
+(CONNECT_DATA =+
+(SID = PLSExtProc)+
+(PRESENTATION = RO)+
+)+
+)+
ORACLR_CONNECTION_DATA =
+(DESCRIPTION =+
+(ADDRESS_LIST =+
+(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))+
+)+
+(CONNECT_DATA =+
+(SID = CLRExtProc)+
+(PRESENTATION = RO)+
+)+
+)+
Now I`m trying to initialize this on one machine (database & client) and so the crystal report will be on the same machine where the database exist; Additionally, this machine has OS Windows 7 Ultimate 64bit and include the Oracle 10g Express Database & Oracle 10g Express Client software.
Please check the files content I included above and give me the way on how to establish a connection from the crystal report to the database where both are installed on the same machine.
Thanks in advance...

Oracle 10g EE Export Results in ORA-01001: invalid cursor Error

Hi,
I'm quite new to Oracle 10g and OCS10g. We have a crippled/corrupt SYSAUX tablespace (data file 3) which cannot be recovered using recover
command anymore. So metalink support instructed us to do a export of the metadata of the working tablespace which contains our system data (we are in configuration stage for OCS 10g 10.1.2) via transportable tablespaces so that I can just recreate the database in DBCA and import the metadata. So after I made a cold backup, set the "transportable" tablespaces to "READ ONLY" mode, I proceeded w/ the export command which resulted in an error, please see below:
$exp \'sys/********@ocs10gSID as sysdba\' parfile=transport.par
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 -
Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses AL32UTF8 character set (possible charset conversion)
Note: table data (rows) will not be exported
About to export transportable tablespace metadata...
EXP-00008: ORACLE error 1001 encountered
ORA-01001: invalid cursor
ORA-06512: at "SYS.DBMS_SYS_SQL", line 899
ORA-06512: at "SYS.DBMS_SQL", line 19
ORA-06512: at "SYS.DBMS_TTS", line 811
ORA-00376: file 3 cannot be read at this time
ORA-01110: data file 3: '/ocfs/oradata/OCS/datafile/o1_mf_sysaux_2mgzbr51_.dbf'
ORA-06512: at "SYS.DBMS_PLUGTS", line 1444
ORA-06512: at line 1
Anyone encountered this problem before? Any recommendations or tips to get this working?
I checked this url:"http://luhartma.blogspot.com/2006/05/how-to-check-if-tablespace-is.html"
And when I try to follow the instructions and check on of the tablespace I set to and verified to be in "READ ONLY" mode, I get the same error.
SQL> connect / as sysdba
Connected.
SQL> exec dbms_tts.TRANSPORT_SET_CHECK('PORTAL',TRUE)
BEGIN dbms_tts.TRANSPORT_SET_CHECK('PORTAL',TRUE); END;
ERROR at line 1:
ORA-01001: invalid cursor
ORA-06512: at "SYS.DBMS_SYS_SQL", line 899
ORA-06512: at "SYS.DBMS_SQL", line 19
ORA-06512: at "SYS.DBMS_TTS", line 811
ORA-00376: file 3 cannot be read at this time
ORA-01110: data file 3: '/ocfs/oradata/OCS/datafile/o1_mf_sysaux_2mgzbr51_.dbf'
ORA-06512: at "SYS.DBMS_TTS", line 840
ORA-06512: at line 1
Hope someone can help on this or at least provide a suggestion. Data file 3 above is the reason we are doing a transportable tablespace export & db recreation.
BTW what we have is:
OCS 10g 10.1.2 w/ Oracle RDBMS 10g Enterprise Edition 10.1.0.4.2
RHEL4 Update2
Thanks in advance.
Regards,
-Kenth

Hi,
The status is "RECOVER" we have actually tried to recover but unfortunately the archive logs that were needed were on disks and were lost during one of the server hardware failures. Actually that is the reason why metalink support recommended this route for getting everything in order since we don't have any application data in SYSAUX yet.
Thanks.

LDAP error 49: OID login failed in Oracle 10g

Hi All,
Am new to Oracle-10g stack. Following is the error while login to "Oracle Directory Manager".
LDAP: error code 49 - 8009030C:LdapErr: DSID-0C090336, coment: AcceptSecurityContext error, data 2030, va28
I forgot the password for su user("cn=orcladmin"), may be I might have locked it also, am not sure.
What is the best way to get back to normal life?. How can I get/reset password for cn=orcladmin account to access OID?
With my R&D I found the following way and here is the result.
ora-infr/bin> oidpassword connect=orcl unlock_su_acct=true
OID DB user password: mypassword
OID super user account unlocked successfully
or-infr/bin> odisrvreg.bat -p 389 -D cn=orcladmin -w mypassword
Invalid Credentials
See the following log file in the current directory for details: odisrvreg.err
Would appreciate your detailed answers to this specific question
ThanQ
Happy Oracle

hi
i have windows xp on my system. i installed
oracle 10g.
when i am trying to login in sql*plus by user name
Scott / system it gives an error account locked .is
there any other default user names and passwords and
host sting ?coud you pleas give me any suggestions
to get started.you suggestions are highly
appreciated.try logging in through ur
system/manager account.
In 10g when u install the password for all accounts must be given.
if the password is not specified then the password is default mentioned above.
After logging in
try this out
sql>ALTER USER SCOTT
ACCOUNT UNLOCK;
the user account will be unlocked

Gis data uploading in oracle 10g database

hello everybody ,
i am new to oracle 10g ,but i am working in gis field for sometime now.i wanted to know whether there is any method present to upload a gis (shape file)data,and the erdas imagine data, in oracle spatial without going to buy the hefty ,arc sde license.
thanks in adavance,
vipul soni

They are permitted.
Pproperly designed 'cartridges' use the published Oracle spec. If they live within the restrictions of XE (size, CPU, and no Java stored procedures) they should work.
Oracle Locator is an example of a properly designed cartridge. So is intermedia.
Locator does not have any Java SPs and works in XE.
intermedia does use Java SPs and does not work in XE.

Oracle 10g R2 vs Oracle 10g;;;Plz Help Me

Hi all;
I'm preparing my first OCA exam ; Oracle Database 10g: Administration I. I 'm doing my preparation basically from 2 books ; Sybex Book OCA-Exam and All-in-One Exam Guide book.
Both books 're based on the first release of Oracle 10g.
My questions 're :
- What's the diffrence between Oracle 10g R2 vs Oracle 10g R1?
- What's New in Oracle 10g R2 (parameters, default parameters values, features...)?
thanks a lot,
Best REgards,
W
Edited by: OracleJavaLinux on Oct 30, 2008 8:01 AM

Well satish has given link for the difference in both the versions. I shall add to this that at this moment of writing,there is not anything which makes the exams depend on the release 2.The sybex books would be good enough but I shall recommend to attend Oracle Univ training for the same.
You can go ahead with the exam by preparing from these books, no issues would be there.
HTH
Aman....

Oracle 10g Lite with ADF/BC4J Application(Offline access in Mobile )

Hi All,
We have the following requirement from one of our client.
Customer Company has R12 Apps instance(which is having 10g Database APPSDB). The users will come in the morning
and connect to the System(NEWSYSTEM) to download their daily worksheet(resides in APPSDB) to their Mobile Devices
(Windows XP - http://www.keenzo.com/zoom.asp?zoom=3830134) and then disconnect from the system. The download of data
should start after login into their Mobile Device Custom Application So that only their worksheet will be downloaded
to their Mobile Device DB.
Then they will goto their fields and review their daily worksheet in the Mobile Device application(NEW APPLICATION)
in offline mode. And update in the application with their findings, which should be stored in the Mobile Device database(MOBILEDB).
In the evening the uses will come and connect to the system(NEWSYSTEM) and login into their Mobile Application and
start the upload process, then the updated data from their Mobile Database will be uploaded into APPSDB via the NEWSYSTEM.
I checked the links, http://www.oracle.com/technology/products/lite/index.html and http://lite.us.oracle.com and I have
got some understanding about Oracle 10g Lite. For the above requirement we are proposing the NEWSYSTEM as Oracle 10g Lite Server
and the NEW APPLICATION as ADF/BC4J which can run in their Mobile Devices(work offline and then sync with DB).
I have the following questions.
1) The above proposing system is feasible?
2) Can we develop the Mobile Application using ADF/BC4J and using that we would like to
control the sync process from our custom application.(so that only their worksheet will come to their Mobile Device DB)
3) If I want to have the above system,
a) I should have Oracle 10g Lite server installed(im Unix or Windows)
b) I should have Oracle 10g Lite client installed in a Windows PC/Laptop
c) To get my custom application in My Mobile Device, first I have to deploy the application
in Oracle 10g server using Oracle Mobile Server. Then I have to connect my Mobile Device to the Oracle 10g Lite server,
and deploy the application in my Mobile Device using Oracle Mobile Manager.
4) I would like to do a POC before start the project.
What are all the installations I have to do in my Laptop.(Consider I am installing Oracle 10g Lite server/client, Mobile Manager in my Laptop)
I am new to Oracle 10g Lite, correct me if any of my understanding is wrong.
If you have any comments in the approach please add it.
Thanks in advance.
With Regards,
Kali.

1) The above proposing system is feasible?
perfecly feasible, and actually a reasonably standard use of oracle lite
2) Can we develop the Mobile Application using ADF/BC4J and using that we would like to
control the sync process from our custom application.(so that only their worksheet will come to their Mobile Device DB)
Actually two different questions here. The application code that runs on the client device can be written in any thing that will run on that type of device, and is capable of using the APIs to connect to the local database, and the other functionality like synchronisation. From the forum there look to be VB, C, java users out there (an i even believe if you wanted to, you could use forms). Main decision regarding the Platform for the application code development tends to be whatever you have the skills in.
In terms of the sync process only downloading a particular users worksheet, this would be defined when you define the snapshots of the database tables you want to download, rather than the sync login process itself.
For example - you have a table WORKSHEETS on the server that you want to download, it has a column EMP_NO which is the employee identifier. You would define the selection for the snapshot as
select * from WORKSHEETS where EMP_NO=:emp_no (note the bind variable)
when you then add users to the oracle lite application (actually the database), then you will have a parameter called EMP_NO to define with the employee number for that particular user, and this will be used automatically as the bind variable in the download.
NOTE subsetting in this way does not need to be direct, for example things like
select * from TASKS where id in (select task_id from user_tasks where emp_no=:emp_no) is perfectly valid
NOTE when reading the forum and documentation, be careful of the word application. There are actually two different things to be developed, both normally called 'application'
Within oracle lite you create an application with publication items, scripts, sequences etc. and then subscribe your users to this application. The application in this context is actually the database and synchronisation management ONLY (you can include files and code for download)
The second application is your runtime code that has a user interface, functionality, processing and validation. This is written in some development platform, and accesses the database created above for select, insert, update etc.
3) If I want to have the above system,
a) I should have Oracle 10g Lite server installed(im Unix or Windows)
YES this goes on the app server and installs a repository schema MOBILEADMIN within your database
b) I should have Oracle 10g Lite client installed in a Windows PC/Laptop
YES - once the server is set up, this is downloaded and set up by accessing the <server url>/webtogo/setup
c) To get my custom application in My Mobile Device, first I have to deploy the application in Oracle 10g server using Oracle Mobile Server. Then I have to connect my Mobile Device to the Oracle 10g Lite server,
and deploy the application in my Mobile Device using Oracle Mobile Manager.
steps in outline are
1) install server
2) develop the oracle lite application (ie: database) and publish this to the mobile server (can use the development kit or java APIs for these two steps
3) add a user with the relevant subsetting parameters
4) set up oracle lite win32 client on the laptop from the server download
5) synchronise using the msync utility on the client to create the databases and odbc entries
6) develop your application code using the client database
7) during development, then changes to database structure would be via changes and re-publish of the oracle lite application, followed by a sync to update the client database
8) once all development is complete, the runtime application code can be bundled up into the oracle lite application if you want, and then the initial sync for live users will download the database and application code.
4) I would like to do a POC before start the project.
What are all the installations I have to do in my Laptop.(Consider I am installing Oracle 10g Lite server/client, Mobile Manager in my Laptop)
You can set up a standalone server on the laptop, but better to do this on a development app server so you can use the main server development database as the data souce for the snapshot definitions (pretty easy install). there are conflicts if you try and put the oracle lite client and the mobile development kit on the same machine, but if you are familiar with java, the API development is fairly straightforward to use (i have developed applications in this, and i know only the basics of java) you do not need the MDK
Basic for a POC i would say is to
1) set up mobile server on development
2) define a simple oracle ite application on two server tables. one has select * from table, and the other has select * from table where .... including bind variable. at this stage use complete refresh as the mode for simplicity
3) publish the application, create user and define the subsetting variable
4) set up mobile client and synchronise user. use the msql utility to interrogate the database and check the content, and do some updates 9standards SQL syntax)
5) create simple appliaction code to conect to and read the database on the client
6) do a sync after the updates above and check they appear in the server
The above should be reasonably quick and proves
a) ability to define the data you want to be sent to the users
b) ability to create an app to manage the database running on the client device in you preferred software platform
c) data download and upload
after this basic POC, you can extend into defining fast refreshes to improve the efficiency of the sync process, managing the MGP process, developing a more comprehensive database and application etc. If you have complex joins between server table, you may also want to look at creating views to denormalise data and use these as the basis for the snapshots

Create huge Waited-Session in a particular moment in Oracle 10g

Friends,
I m new in Oracle 10g database . I m working in a bank and Our production server runs in Oracle 10g in AIX server . We also running an application server with Oracle 10g database . Recently I got a strange problem in my production server .I have a schema called 'schemafe' which contains all of our users who are using the application mainly. They connect into my database via this schema .
Now recently , the users of this schema increase the "WAITED-SESSION" in our production server . And at that moment another users are hanged on . And after 10/15 minutes it becomes normal .
In this situation, can anybody plz help me to give a suggestion that how can I tune my database and remove this type of problem ? And for this situation , which things I need to tune or monitor .
Waiting for ur kind reply .. ..

Friends,
I m new in Oracle 10g database . I m working in a bank and Our production server runs in Oracle 10g in AIX server . We also running an application server with Oracle 10g database . Recently I got a strange problem in my production server .I have a schema called 'schemafe' which contains all of our users who are using the application mainly. They connect into my database via this schema .
Now recently , the users of this schema increase the "WAITED-SESSION" in our production server . And at that moment another users are hanged on . And after 10/15 minutes it becomes normal .
In this situation, can anybody plz help me to give a suggestion that how can I tune my database and remove this type of problem ? And for this situation , which things I need to tune or monitor .
Waiting for ur kind reply .. ..

Oracle 10g : database generation script

I am new to oracle 10g and have migrated the database from MS sql server to Oracle using the migration work bench. Everything got migrated al right but now I want to generate a script of the database. Is there any way I can generate a db building script of the database like I can do in SQL server. Also, SQL server enterprise manager has a diagram tool where I can view the database diagram? Is there anything matching in Oracle?
Thanks,
balak

You can try to use export tool (exp) with full=y rows=n and then import tool (imp) with show=y: but that does it not easy to read or to process.
You can also have a look to package DBMS_METADATA but it likely requires some PL/SQL code the loop for each type of object and for each schema.
See http://download-uk.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_metad2.htm#1028659
For 10g, there are maybe similar features with the data pump tools but I am not sure: http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_overview.htm#i1009203
Message was edited by:
Pierre Forstmann

Could not see oracle database homepage in oracle 10g version

hi ,
i am trying to open database home page option of oracle 10g software, but could not do it.
i have started the services ORACLEXETNS listener,oracle service XE, and could not see the database home page.
i am new to oracle 10g,
i am getting the error 'page cannot be displayed' .
could some one help me regarding this.

Are you taking about enterprise manager .Type a correct address in address bar to run web base enterprise manager.you can check whether enterprise manager is running or not by using command >emctl status dbconsole .Or you have some other issue.please write if there is any error.
Regards

Oracle 10g Forms - recommened books, learning materials?

Hi, I am new to Oracle 10g Forms development. I did a search for books on Amazon and the internet, but did not find books specific to Oracle 10g Forms. I found books on JDeveloper, web development with ADF, Fusion development, etc.
Are there books written specifically to 10g Forms development? I am not sure what to search under to find them. Perhaps I am searching under the wrong terms.
How can I get up to speed quickly?
Any help would be greatly appreciated. Thank you very much in advance.
Regards,
TCN

http://www.scribd.com/doc/78975271/Oracle-Forms-Developer-Form-Builder-Reference-Volume-1
volume 2 is also there, just search in the same page...
this will help you understand bricks of form builder...
enjoy....have a nice day
MANI

New to Oracle 10g

Similar Messages

Maybe you are looking for