New types in BI
Hi
1) Can any one tell me the situation occurs to use Interrupt Process chain in Process types?
2) What is the use of Decision between Multiple alternatives option in PCs?
3) What is the use of following options in Process chains
Work Flow
Is the previous run is still active
Close request of Infopackage
Reorganize Attributes and Texts for master data
Send POS sales data to XI system
DSO replication
Master data update with Global keys
Last customer contact update
Thanks Sravani
Hi
1) Can any one tell me the situation occurs to use Interrupt Process chain in Process types?
When you want to have an and condition before starting or continuing the process chain you could use this process type.
Example scenario : I want to load a cube from a DSO only once a week but my DSO would be loaded everyday.
in such a scaenario you start process of the process chain to load till cube would have the schedule to start daily.
The process chain would load till DSO until interrupt process and would be interrupted.
If it is supposed to load the cube on monday only or after an even only, the interrupt process would execute successfully on monday or after that particular event it is waiting fo and thus would allow the process chain to continue loading to the cube.
2) What is the use of Decision between Multiple alternatives option in PCs?
Example scenario:
I want to execute a particular process on monday another set of processes on tuesday , other on wednesday...
This could be done using Decision between multiple alternatives option.
The variant has an option to write formulas which enable this process type to take decision and execute the corresponding processes.
3) What is the use of following options in Process chains
Work Flow - don't know
Is the previous run is still active - This is required when you dont want the process chain to start when its previous un has not completed.
Example: when you have a process chain on hourly schedule and is loading deltas and activating DSOs.
You could have a delay in one of the runs. You would want to avoid locking of objects which could occur if the same process chain would load the DSO in one run and activate in another.
Close request of Infopackage - It is required for real time info cube loads I suppose.
Reorganize Attributes and Texts for master data - This is required to repair master data.
Removes M records from time dependent and independent master data table.
Combine 2 time interval records if the attribues are consistent within the records.
Send POS sales data to XI system - dont know.
DSO replication - dont know
Master data update with Global keys - dont know
Last customer contact update- dont know
Regards,
Sunmit.
Similar Messages
-
Training and event management - create new type of attendee
Hi all,
For training and event management, I have to create a new type of attendee besides sap existing attendee type such as company, contact person, customer, external person and so on.
Via IMG -> Training and event management -> basic settings -> object type modeling enhancement -> object type -> define object types, then how can I define OrgObj Type for new object type I want to create?
Thanks & regards,
WCCS_AHR_61016216 - Cancellations per Attendee , i think there is no standard report for cencelation of business events, type and group.
for cancellations per attendee reports is available in the system.
good luck
Devi -
Definition of a new type of invoice for Evaluated Receipt Settlemen (ERS)
Hello,
I need to define a new type of invoice for Evaluated Receipt Settlemen (ERS). Is it possible? What should i do to configure the system?
Thanks in advance,
Luis Álvarez.Hi,
ERS is used for invoice plan & invoicing plan for leasing agreements like, aim to considerably reduce the manual data entry effort in the purchasing and invoice verification (A/P) department.
The invoicing plan enables you to schedule the desired dates for the creation of invoices relating to the planned procurement of materials or services independently of the actual receipt of the goods or actual performance of the services. It list the dates on which you wish to create and then pay the invoices.
The steps are,
1.XK02: In Purchasing Data tick the check box of AutoEvalGRSetmt Del,
2.ME12: Should not select No ERS check box,
3.ME21N: Create PO,
4.MIGO: Receive Goods,
5.MRRL: Evaluated Receipt Settlement
Link may be useful.
http://help.sap.com/saphelp_srm30/helpdata/en/fb/8dec38574c2661e10000000a114084/content.htm -
Add a new type of object links (transaction CV02N) - by material group .
Hi experts .
How can I create an additional screen for new tab by material group
in DMS System ?
I have a requirement : 1. Add a new type of object links in transaction CV02N
by material group(V023-MATKL) .
Today we use 2 existing options : by Equipment and material .
2. Save and display data .
We did the following steps :
1 . In customizing for Document Management :
a. Maintained a key fields :
table : V023 , tran.code : OMSF , field name : MATKL .
b. Maintained screen object link for V023 .
Our problem is screen number . we used at existing screen - 500 for user exit.
So we get a new tab with material instead of material group .
How I can create a new screen with field material group
for set this screen number in step b ?
May be I need the access key for FUNCTION GROUP CV130
and create this screen by myself ? .
c. Defined Object links for special document type .
2 . Created in se19 at implementation of DOCUMENT_OBJ
with defined filter : V023 .
Regards Helena .Hi Nuno,
how did you solve this problem?
tks -
Problem with new type of Document and WebUI
Hello everyone,
My problem is quite strange. Here it is :
I have created a new subclass of Document using the API, named IFSDocument. So, i created a class IFSDocumentDefinition and a class IFSDocument. Here is the code :
IFSDocumentDefinition :
package fr.sword.ifs.GestionDocument;
public class IFSDocumentDefinition extends DocumentDefinition {
protected LibrarySession ifsSession;
public IFSDocumentDefinition() throws IfsException {
setClassname("IFSDOCUMENT");
public IFSDocumentDefinition(LibrarySession ifsSession) throws IfsException {
this();
this.ifsSession = ifsSession;
IFSDocument :
package fr.sword.ifs.GestionDocument;
public class IFSDocument extends TieDocument{
public IFSDocument(LibrarySession session, Long id, Long classId, S_LibraryObjectData data) throws IfsException {
super(session, id, classId, data);
In this class, i've created a new ClassObject to handle my new type. Here is the method :
public void createIFSDocument(LibrarySession ifsSession) throws IfsException {
DocumentDefinition myDocDef = new DocumentDefinition(ifsSession);
Document doc = (Document)ifsSession.createPublicObject(myDocDef);
ClassObject co = doc.getClassObject();
ClassObjectDefinition cod = new ClassObjectDefinition(ifsSession);
cod.setSuperclass(co);
cod.setSuperclassName(co.getName());
cod.setName("IFSDocument");
ifsSession.setInstallationMode(true);
c = (ClassObject)ifsSession.createSchemaObject(cod);
c.setBeanClasspath("fr.sword.ifs.GestionDocument.IFSDocument");
c.setSelectorClasspath("fr.sword.ifs.GestionDocument.S_IFSDocumentSelector");
c.setServerClasspath("fr.sword.ifs.GestionDocument.S_IFSDocument");
ifsSession.setInstallationMode(false);
I also created two classes named S_IFSDocument and S_IFSDocumentSelector that do nothing special but calling super(). Here is the code :
S_IFSDocument :
package fr.sword.ifs.GestionDocument;
public class S_IFSDocument extends S_TieDocument {
public S_IFSDocument(S_LibrarySession session, java.lang.Long classId) throws IfsException {
super(session, classId);
public S_IFSDocument (S_LibrarySession session, S_LibraryObjectData data) throws IfsException {
super (session, data);
S_IFSDocumentSelector :
package fr.sword.ifs.GestionDocument;
public class S_IFSDocumentSelector extends S_DocumentSelector {
protected S_IFSDocumentSelector(S_LibrarySession session) {
super(session);
protected S_IFSDocumentSelector(S_LibrarySession session, Long classId) throws IfsException {
super(session, classId);
Everything seems to work since i'm able to create new objects of type IFSDocument. I can add custom attributes, put them into folders etc. BUT when i use the web interface, i have the following error message :
oracle.ifs.common.IfsException : IFS-21002: Unable to construct S_LibraryObject for class fr.sword.ifs.GestionDocuments.S_IFSDocument (invalid class path specification)
I don't understand why my classpath is invalid since i simply call super(). So, where is the problem ? Do i have to put the class(es) on the Server ?
By the way, what's the purpose of the Selector class ? Is it related to search ?
Thanks in advance.
Regards,
Guillaume
PS : i'm using iFS 1.1.9 on Oracle 8.1.7 and NT4 sp6Hi Guillaume,
don't know exactly but what i have in mind
is that everything in iFS API that starts
with a S_ is executed at server side, so the
classes should exist there.
You can easily check this if you put your
classes in directory %IFS_HOME%\custom_classes
You are right, the Selector class is for SIMPLE searches, for example:
LibrarySession ifsSession;
String searchCriteria = PublicObject.NAME_ATTRIBUTE + " = '<someName>'";
Selector mySelector = new Selector(ifsSession, Document.CLASS_NAME, searchCriteria);
LibraryObject objs[] = mySelector.getItems();
Regards,
Ralf
null -
Hi
I need to create a new alert, its possible to create a new type in AMON1 or if its possible to change one standard alert?
Thank you,
LucasIf anybody has the same doubt this document can solve your questions...
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80b31362-7806-2d10-84a0-d2886880c282?QuickLink=index&… -
A new type of activeKey USB token problems.
My activeKey USB token worked until recently. I did this: https://discussions.apple.com/thread/2526943 and I installed the package: http://smartcardservices.macosforge.org. Once I renewed, the usb key doesn't show up in my keychain. This isn't a cache thing, as we tested a coworker's activKey which worked, then we updated it and it also doesn't show up in the key chain.
Linux pcscd daemons don't pick it up either.
Oooh, quick note: my company apparently had to do something recently because the activKeys weren't working on Windows 7. Is there a new type of activeKey that's been installed onto the card? (This stuff is mostly black magic to me.)
Any help?I have exactly the same problem - tried deleting the cache - tried reinstalling the smart card services - no success yet
This is a real problem as it leaves me dead for native Mac OS/X to access certain corporate web sites - have to use Parallels / Windows instead :-( -
Add new type phones CUCM 4.2
Hello, i have work to buy new phones in organization. But 7900 not selling now, how i see. How i can add new types phones to my CUCM.
Thanks!Hi Dmitry,
The "G" in the suffix of these models (like 7941G) stands for Global. The
"GE" in the 7941G-GE stands for "Gigabit ethernet" as it is a 10/100/1000
model.
Keep in mind that there are 7900 models like the 7945G/65G and
7942G/62G that are not End of Sale or End of Life and can be added to
CCM 4.2(3) with the installation of a Device Pack like the one shown below;
Firmware Versions
Cisco Unified CallManager Device Package 4.2.3(60.0) includes the following firmware versions:
Firmware
4.2(3)Devpack 60
Analog Access WS-X6624
A00204000013 / A0034322
Digital Access WS-X6608
D00404000032 / D0054322
Conference Bridge WS-X6608
C00104000003 / C002E031
Media Termination Point WS-X6608
M00104000006 / M002E031
ATA18X
ATA030204SCCP090202A
7915-12 Button Extension Module
B015-1-0-3
7915-24 Button Extension Module
B015-1-0-3
7916-12 Button Extension Module
B016-1-0-3
7916-24 Button Extension Module
B016-1-0-3
IP Phone 7902g
CP7902080002SCCP060817A
IP Phone 7905g
CP7905080003SCCP070409A
IP Phone 7906G/11
SCCP11.8-4-4S
IP Phone 7912g
CP7912080003SCCP070409A
IP Phone 7920
cmterm_7920.4.0-03-02
IP Phone 7921g
CP7921G-1.3.2
P Phone 7925g
CP7925G-1.3.2
IP Phone 7935
P00503021900
IP Phone 7936
cmterm_7936.3-3-20-0
IP Phone 7937
apps37sccp.1-3-3-0
IP Phone 7941/7961
SCCP41.8-4-4S
IP Phone 7941G/7961G
SCCP41.8-4-4S
IP Phone 7942/7962
SCCP42.8-4-4S
IP Phone 7945/7965
SCCP45.8-4-4S
IP Phone 7970/7971
SCCP70.8-4-4S
IP Phone 7975
SCCP75.8-4-4S
IP Phone 7985
cmterm_7985.4-1-7-0
IP Phone 7960
P00308010100
IP Phone 7940
P00308010100
7914 14-Button Line Expansion Module
S00105000400
http://www.cisco.com/web/software/282074299/26745/ciscocm.4-2-3-DevPack-60_readme.html
Available via this path;
Downloads Home
Products
Voice and Unified Communications
IP Telephony
Unified Communications Platform
Cisco Unified Communications Manager (CallManager)
Cisco Unified CallManager Version 4.2
Unified Communications Manager/CallManager Device Packages-4.2(3.60)
Cheers!
Rob
"Clocks go slow in a place of work
Minutes drag and the hours jerk"
-The Clash -
Hi, I want to create new (from copy of existing type) type of order.
I will create new order in ME21 with new type which I create.
There is some stuff in forum - f.e. information that I can do it in SPRO:
"PM/CS>Maintenance and service processing>Maintenance and service order ...", but I dont have it.
Thanks for help.Hello,
If you want to create a new PM/CS order:
PM/CS>Maintenance and service processing>Maintenance and service order --> Define order types.
But these orders can be executed from transaction IW31.
Prase -
i need new type of Questions, a matrix with multiple text boxes in row? is it available or how we can build one?
Hi,
We don't yet support this. This idea has been suggested in our ideas section. I suggest you vote for it there, as we do look at the ideas section when deciding what new features to work on. Here's links to ideas that have been suggested:
http://forums.adobe.com/ideas/1046
http://forums.adobe.com/ideas/1709
Thanks,
Todd -
How can I capture without Firewire 400 on a new type MacPro?
I mean, Sony HDVs only have FW400, but there are no more FW400 on new type MacPros.
It means that I have to buy a AJA hardware?Do remember that Firewire ports on Mac Pro's are hub'd together. I'm no 100% sure if it the same on the new '09 Mac Pro's but certainly on the older ones. this means that if you have a FW800 drive plugged in and then plug in a FW400 drive the whole speed of both devices will drop to a FW400 speed. Even worse, if you plug a camera in sometimes hese can run at what equates to FW100 / 200 speed. Therefore your FW800 speed drive will become massively unresponsive.
So if you're planning on digitising, remember to plug the camera into one of the front ports, and the drive into a back port. that should avoid the slow down. -
TypeSafe Enums + readResolve + New Types
I have the following code:
public final class Type implements java.io.Serializable {
public static final Type TYPEA= new Type ("TYPEA");
public static final Type TYPEB= new Type ("TYPEB");
public static final Type TYPEC= new Type ("TYPEC");
public static final Type TYPED= new Type ("TYPED");
private String type;
public Type (String type) {
this.type = type;
public String toString() {
return this.type;
private static int nextOrdinal = 0;
private final int ordinal = nextOrdinal++;
private static final Type [] VALUES = { TYPEA, TYPEB, TYPEC, TYPED};
Object readResolve() throws ObjectStreamException {
return VALUES[ordinal];
}My problem is that I want the user to be able to add a new type for example lets say TYPEF. how would I go about doing this and also make it work with serialiazable?you can overcome the and .equals() failing with a very minor amount of code. Basically you need a set of all possible typesafe values.
Additionally you need to implement readResolve to prevent serialization from cloning.
Finally - it's just never a good idea to use == for equality comparison. It should only be used for identity comparison (and even then most of the time you should have equals perform the identity comparison).
private static final Stooge[] ALL = new Stooge{Moe, Larry, Curly};
//see java.io.Serializable for details
protected Object readResolve() throws ObjectStreamException {
return getTypeFor(this.name);
//you usually need this for retrieval from persistent storage
public static Stooge getTypeFor(String name){
Stooge result = null;
for(int i = 0; i < ALL.length; i++){
if(ALL.name.equals(name)){
result = ALL[i];
break;
return result; -
Can I get a Mini DVI (old type) to Mini DVI new type adaptor? Does it exist
I have a number of the old Ibook mini DVI to VGA/S-Video adaptors. My IBook died and got a macbook that has a mini DVI port - but not the exact same type as the Ibook. (Its NOT the Macbook pro type port). Does anyone know if there is a patch cord that has a male Ibook type mini DVI on one end and a female mini DVI on the other so these various adaptors I have will function.
Any help will be greatly appreciated.
Thanks,
SkipCould it possibly be with the new software upgrade? I just updated from 10.6.1 to 10.6.2 and all of a sudden my Mini-Dvi to Video stopped working too. I'm using my Mini-DVI to VGA without problems at work with the same computer and a few minor adjustments to the display prefs.
Apple says the 10.6.2 update was supposed to correct display issues. Could they have accidentally deleted support for the adaptor while correcting other issues?
Perhaps the cheapest solution to this would be to downgrade back to 10.6. Any advice on this?
I'm running a 2.2 Core2 Duo MacBook from mid-`08. -
I use a very popular type of storyboard in Germany which is used for TV Dokus.
It contains the following 6 columns:
- scene (no)
- Start (Timecode)
- Visual (Description)
- Audio (Description)
- Duration (in minutes and seconds)
- Status
I tried to import a WORD-Document and failed. (DOCX, RTF, PDF)
So I developed a new storyboard with several columns. But this is nearby of no use, because it makes no sens to work with it.
Even reenumeration scenes does not work.Since its a column script that you are using, instead of importing the script into Story please try the following -
1) Create a multicolumn script first in Story. (New-> Multicolumn Script)
2) Copy the table from the word doc (Ctrl+C) into this script. (Ctrl+V)
You can add/delete columns and rows, edit column headers as per you need.
Let me know in case you face any issues.
Thanks
Rashi -
I'm having trouble with DW5.5 on Mac OS 10.6.8. I'm trying to update my resume and when I type in my new info, "Is This How I Look?" I can't see it on my design page, but it shows up on the code page. Here is the code from the top of the page and following is the line of code with the new copy in it. My url is http://www.deborahdavisdesign.com/.
Thanks for any help.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/basic_page.dwt" codeOutsideHTMLIsLocked="false" -->
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />
<!-- InstanceBeginEditable name="doctitle" -->
<title>Resume</title>
<!-- InstanceEndEditable -->
<p><span class="subhead">2011</span><br />
<span class="show_name">Is This How I Look?<span class="resume_text"></span></span><br />
</p>Hi, Jtanna. I did the best I could per your instructions. Here is the link to the test page.
http://deborahdavisdesign.com/resume_Test.html
I noticed that all of the copy in the resume in Bold Ital does not show up on my Design View, but does in Code View and on the site. When I created this site, I used CSS and assigned a style to all text. Now, when I put in an insertion point in my text in Design View I can see the assigned style. But I cannot select just one word or a phrase, the entire line of copy is selected when I click and drag. And when I am forced to select the entire line of copy, no CSS style shows up then.
Here is a screen shot showing the missing copy in Design View. If you compare that to the website, you will see that all the Bold Ital heads are missing.
Not sure if this is a CSS issue, or an upgrade issue, or old code from CS2 messing it up. Thanks SO much for helping me out. Looking forward to getting this figured out. -
Associate new type of purchase requisition to WRP1
I have created a type of purchase requisition (ZNBB) and I can't associate it to the Replenishment Planning.
I have tried to associate it in the SRS parameters and also using the MRP Groups, but WRP1 keeps calling the standard type of requisition (NB). This is a problem for us since we have a different logic for our retail operations than for the rest of our operations. Is there anyway of making WRP1 call the new purchase requisition type?
Best Regards,
Patrício SilvaHi
Does anyone has the solution to this issue? I am also having the same issue..
Best Regards
Junwen
Maybe you are looking for
-
Cisco VPN Client causes blue screen crash on WindowsXP Pro (Satellite M30)
Hi there, I've got a Satellite Pro M30 running Windows XP Professional. After starting a vpn Tunnel via a Cisco VPN Client (Version 4.6 and 4.7) the system crashes with a blue screen. I can see that the key exchange is successful, but immediatly afte
-
System is unstable and keeps crashing after OS update...
My computer became totally unstabel after the lastest Mac OS update - Mail app craching, Safari Crashing and now the whole system crashes. Below, the copy of the report I got after the latest crash: Anonymous UUID: EC5E43C7-.......... Tue May 1
-
How do I get rid of a playlist that some how duplicated itself thousands of times?
I deleted all dups on my MacbookPro however they still show up on my iphone and iPad. I turned off iTunes match and back on, for both devices, only to have them reappear. I made sure to close iTunes and reopen letting iTunes match do its thing, but
-
Hi, I have a scenerio where in my Idoc has two segments as shown below. <b> E1PITYP</b> <i> Z1P9008 E1P0021</i> E1PITYP - is the parent and the other two are child segements. I need to map both these segments into one single record. This is
-
How do I download Photoshop Elements 13 onto my laptop?
How do I download Photoshop Elements 13 onto my laptop?