New workcentre

Hello
I need to create a new work center and add to the existing navigaion profile.
when the new work center is launched, a page to be displaed in the work center page with search/create/reports group .Under each group ,custom transaction links to be placed.
Question is ,whether to display the work center page,a new view has to be created or any existing component can be used?
any help is appreciated.
regrads
John

Hello Pankaj Kumar,
I created a custom component with the name ZBOL_2.
I Created a Work area over view page in that with name OPage.
I created a Target Id ( CRE_TID ) for that component Inbound Plug.
I created a Logical link (ZCRE_LL) for that Target Id.
I created a work center(ZCRE_WC) for that Logical Link.
In ZBOL_2 i have
ComponentUsage       search
Used Component        CRMCMP_GS_WC
InterfaceView             IFVGroupLinks
In Component controller method WD_USAGE_INITIALIZE i write the code like this.
DATA: WCCONTEXT TYPE REF TO CL_BSP_WD_CONTEXT_NODE.
CASE IV_USAGE->USAGE_NAME.
    WHEN 'search'.                                          "#EC NOTEXT
      TRY.
          WCCONTEXT = IV_USAGE->GET_CONTEXT_NODE( 'WORKCENTERINF' ).
          WCCONTEXT->SET_S_STRUCT( ATTRIBUTE_PATH = '' COMPONENT = 'COMPONENT' VALUE = 'ZBOL_2' ) . "#EC NOTEXT
          WCCONTEXT->SET_S_STRUCT( ATTRIBUTE_PATH = '' COMPONENT = 'INTERFACE_VIEW' VALUE = 'MainWindow' ) . "#EC NOTEXT
          WCCONTEXT->SET_S_STRUCT( ATTRIBUTE_PATH = '' COMPONENT = 'GROUP_TYPE' VALUE = 'BB' ) . "#EC NOTEXT
        CATCH CX_ROOT.
      ENDTRY.
    WHEN 'CREATE'.                                          "#EC NOTEXT
      TRY.
          WCCONTEXT = IV_USAGE->GET_CONTEXT_NODE( 'WORKCENTERINF' ).
          WCCONTEXT->SET_S_STRUCT( ATTRIBUTE_PATH = '' COMPONENT = 'COMPONENT' VALUE = 'ZBOL_2' ) . "#EC NOTEXT
          WCCONTEXT->SET_S_STRUCT( ATTRIBUTE_PATH = '' COMPONENT = 'INTERFACE_VIEW' VALUE = 'MainWindow' ) . "#EC NOTEXT
          WCCONTEXT->SET_S_STRUCT( ATTRIBUTE_PATH = '' COMPONENT = 'GROUP_TYPE' VALUE = 'AA' ) . "#EC NOTEXT
        CATCH CX_ROOT.
      ENDTRY.
    WHEN 'Reports'.                                         "#EC NOTEXT
      TRY.
          WCCONTEXT = IV_USAGE->GET_CONTEXT_NODE( 'WORKCENTERINF' ).
          WCCONTEXT->SET_S_STRUCT( ATTRIBUTE_PATH = '' COMPONENT = 'COMPONENT' VALUE = 'ZBOL_2' ) . "#EC NOTEXT
          WCCONTEXT->SET_S_STRUCT( ATTRIBUTE_PATH = '' COMPONENT = 'INTERFACE_VIEW' VALUE = 'MainWindow' ) . "#EC NOTEXT
          WCCONTEXT->SET_S_STRUCT( ATTRIBUTE_PATH = '' COMPONENT = 'GROUP_TYPE' VALUE = 'CC' ) . "#EC NOTEXT
        CATCH CX_ROOT.
      ENDTRY.
ENDCASE.
I assign some Logical links in the Nav bar profile.
I assign Nav Bar Profile to the Business Role also.
I did not get the Links in under Search as well as in Create also.
How I will get the data into that. Please tell me the solution regaring this.
Is there any missing like code. Let me know.
Regards,
B. Krishna.

Similar Messages

How to print from Mavericks to an old Xerox M24 Workcentre?

Dear All,
We have a Xerox Workcentre M24 printer-fax-scanner at our office.
Unfortunately Xerox stopped supporting this printer for Mac OS X from version 10.3 when they still provided a beta driver. This is particularly unfortunate since we are still under contract with Xerox - so we must keep the equipment even if they do not provide updated drivers for it :-(
Although Xerox states that the M24 is not compatible with recent Mac OS X I myself am so far perfectly able to print from my computer running Mavericks. I suppose this happens because I already had the drivers installed and working back in Leopard and then upgraded to Snow Leopard, Mountain Lioin and finally to Mavericks allways keeping the abillity to print to it.
Why am I bothering you since I can print? Because no one else at my office can! Newer Macs and even older that did not previously installed the drivers cannot print since there are no driver installers at all.
Xerox does provide a Global printer driver with limited functionallities but not for Mac, only Windows! :-(
Apple does provide a Mavericks printer drivers package but the Xerox M24 is not included.
Does anyone have a suggestion?
Left without options so far I was wondering if it would be accpetable to copy one or more printer/system folders from my computer and bluntly paste them onto my colleagues Macs. If you think this won't create havoc on their system, and that it actually might work can you help me directing me to which folder(s) to copy?
Much obliged,
-- joão

You aren't without options!
I don't recommend copying files.
From the specs from Xerox:
PDLs: PCL6 and PCL5e emulations, optional Adobe® PostScript® 3™
So, first question is do you have the postscript option installed?
If not, no problem - this printer emulates an HP laserjet with the Page Description Language "PCL."
You should try this:
1) in Print & Scan prefs click " + " (add), and select IP printer > HP Jetdirect/socket protocol.
2) Enter the printer's IP address.
3) For driver, select "Generic PCL"
Now, this will only print black & white, but is a good test to see if it works with your Mac.
Report your success.

How to Create New Activity Type for Assiged to work centre Costing in Acti

Dear Sir,
We have four activity type to assigned in workcentre Costing Activity. Details are as under
AIRJET     2010     AIRJET
DONIER     2010     DORNIER
SULTEX     2010     SULTEX
SULZER     2010     SULZER
in addition one more loom is comming in our unit and require new activity type.
How can i create new.
Please guide.
Thanks in advance
Regards
Ajit

Dear ,
To create new Activity Type , you need to follow the below steps :
KA01 - Create Primary Cost Element for the new activities type.
KL01 - Create Activity Type tied to the primary cost element.
KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
Assign the activity type to cost center using T code KP26.
In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal Year as 20xx.
Click on Overview tab on top and key in costing details in this screen.
After performing this ,while creating the work center ,this combination of activity type & cost center should be assigned.
At work centre level , you should have
1.Create Standrad Value Key -OP19 and Formula Key in OP49.
2.Create Formula Parameters in OP7B or u can use existing one to assing in the Standard Value Key
3.In CR02-Assing the Standard value key in Basic Data and select the Formula Key in Costing tab with cost centre assingement .Save
Try and check
Regards
JH

Options under IC_EMAIL workcentre in Interaction disable in CRM 7.0

Hi All,
We have to implement outgoing email(No incoming) for our client in CRM 7.0.
We are trying to use IC_EMAIL workcentre in our business role,but all fields are disable in this workcentre currently.
We have to still start with basic email config,but how can these fields would become active.
I have already activated the service mentioned in the SAP note 1281208
Also how can we configure outgoing email through IC_EMAIL as I am pretty new to this topic
Regards
Nikhil
Edited by: Jayant Sinha on Sep 11, 2011 4:37 PM

Hi Joaquin,
Thanks for your response, unfortunately your suggestion didn't solve our issue.
In our system we are implementing only outgoing email (no incoming email).
Regards
Nikhil

Cost From BOM, WorkCentre, Routing

Hai Techies,
Could you please help me with some inputs for my query related to capturing cost from BOM, Workcentre, routing. To capture the cost should it always require to have an production order?
My doubt is mainly with respect to new product where they are creating a new product and during the new product implementation. So for the new product there wont be any production orders(correct me if im wrong). In that case how to compute the cost of the product.
Is there any possibilities.
Thanking you in advance.
Regards,
Gopalakrishnan.S

Hi,
In SAP you need to have either production order ( Discrete ) or planned order ( REM) in place to capture the cost.
cost are captured when you book confirmation in Co11n or MFBF.
From PP side you need to maintined OPL8 custmizing for planned and actual costing variant. These costing varaints are created in CO.
In BOM you need to mainating stock items and in staus / langauage text view maintin indicator , item relevent for costing.
In Routing operations you need to maintin contorl key which allows costing as well as in detailed operation view maintain indicator, costing allowed for operations.
Work center has cost center attched to it. It also has different costing formulas which helps you to claculate activity costs of individual operations to which work center is attached.
Regards,
Santosh Sarda

Xerox Workcentre XD120f

Hello,
I recently inherited a Xerox Workcentre XD120f and would like to connect it to my mac. The printer only has a parallel port but I purchased a cord awhile back that converts it to USB. When I plug the printer up to the mac and go to the add new printer in system preferences, the mac recognizes it. However, the specific driver is not listed as an option in the pulldown menu.
I have looked on Xerox's website online and from what I can tell they do not support OS X drivers for my specific printer. Does anyone know of a thrid-party vendor that does? Or anyone who has successfully performed this combination using a different print driver (I know from personal experience there are some HP printers that only work with an Apple Laserwriter driver, etc. See iFelix's webpage for more details).
Any help would be great! Otherwise I just have one heck of a copy machine, ha ha.

Here are all the third-party CUPS drivers I know of:
http://www.linuxprinting.org/macosx/
http://gutenprint.sourceforge.net/
http://www.printfab.net
http://www.easysw.com/printpro/
As far as I can tell, no one has figured out how to print to your printer:
http://www.linuxprinting.org/showprinter.cgi?recnum=Xerox-WorkCentreXD120f

HT3771 Print with a Xerox workcentre 5020 using Snow Leopard

Hi!
I've been looking everywhere for a driver (any driver) that may help me use this Workcentre with our Macs. I know there's none from Xerox for this printer so, any idea, tip or suggestion to make this work? Besides buying a new printer of course...

Looking at the specifications for this printer, it appears that is uses a proprietary driver that was only ever released for Windows.
I also had a look at the Linux Foundation for an open source driver but there does not appear to be one for this model.
If you still have a Windows XP computer, you may be able to use it as a print server and use this instruction to print from the Mac.

WorkCentre 6027 blank display

I am trying to install a Xerox WorkCentre 6027. I have connected it to a PC by USB and supplied it with power as per the installation guide. When I power the printer on, there is eventually a single beep, but nothing is displayed on the control panel. The home button is lit, and the status lights appear to light correctly, but none of the buttons do anything. I'm trying to follow the installation guide which says that at this point I should "follow onscreen instructions" but there's nothing displayed. After installing the drivers on the PC, I can successfully print, but without the display or control panel I obviously can't configure the printer further. Applying the firmware update didn't change anything either.

If this is a new machine I would return it for replacement. Sounds like a defective product. The screen should display something long before anything PC side is done. Try holding the power saver button for five seconds and then pressing and releasing the pause button to reset the display. If you have a maintenance agreement with Xerox have a tech come on site. If no contract and older out of warranty device, call Xerox anyway, there were some products that had a bad run of displays, I don't know the specifics and models, but it can't hurt to try.

Adding new printer Device Type

Hi Friends,
we have a new printer. now we don't have the exact device type matching the printer(Xerox Workcentre 7232). i visited xerox website and their i found a exact device type. Now my question is
1) If i install this new Device Type at saplevel does it overwrite any existing devicetypes at sap level.
2) Do we have any device type which matches this printer.
Thanks,
Vijay

follow note 8928      List of supported printers/device types
note 635230      Xerox SAP PCL and PostScript Device Types
note 6427      Information about device type upload/download
cheers,
-Sunil

New DVR Issues (First Run, Channel Switching, etc.)

I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.

I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

New Phone

My husband used my iCloud account before I had an iPhone. Now that I have one, I am still finding information from when my husband used the account. I try to backup my iCloud account and it says I do not have enough space, but I know I still 3.9GB left. I log on to the iCloud website and I can not find any record of my phone or my husband's phone on the iCloud website. I want to clear everything he had on the phone prior to me using it starting in December. Is there a way to do that?

Done properly, you won't lose anything. You would not be able to migrate your existing iCloud email account to the new account, but you could still use it for email as a secondary account on your phone if you want to.
You would need a new Apple ID to create the new account, which requires a verifiable email account to set up. You can easily get a free Gmail address for this purpose. You can create a new Apple ID by going here.
To migrate your data to a new account, you start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. This is necessary because photo stream photos cannot be moved to another account and will be deleted from your phone when you delete the existing account.
If you are syncing notes with iCloud that you want to keep, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Notes is the other data set that cannot be migrated to a new account, and therefore must be recreated.
Then go to Settings>iCloud, tap Delete Account, provide the password to turn off Find My iPhone and choose Keep on My iDevice when prompted. Then sign back in with a different Apple ID to create your new account and choose Merge to upload your data. When you turn on Mail you will be asked to choose a new iCloud email account if you want to use iCloud for email. If you want to continue to use the email account from your current iCloud account, you can add it to your phone by going to Settings>Mail,Contacts,Calendars>Add Account>iCloud, signing in with your existing iCloud account ID and turning Mail on.
Ringtones and Music are not effected by this change. You can continue to use your current ID for your iTunes purchases; it does not need to be the same as your iCloud ID. Of course, if you want to rid yourself of your husband's purchased list, you could change your iTunes ID as well. I wouldn't recommend this, however, as then you would be managing two IDs for your purchased media. This is because all existing purchases will remain tied to your existing iTunes ID and future purchases will be tied to your new ID.

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Firefox logo missing from new browser; would like to see it so I can know at a glance which browser I am using.

Bring back the logo or something else to allow quick identification of browser. Chrome doesn't have its logo in the browser either so now it going be harder to tell between the two. Is this a contest to see which can be more self effacing?

You can click the 3-bar Firefox menu button and open the Customize window.<br />
At the bottom of this window there is a button to enable showing the title bar.
See also:
*https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
*https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox
;[[Image:Customize Fx 29 Win8]]

At a glance what is new in Safari 5

This should give a little in sight:
http://lifehacker.com/5557731/first-look-at-whats-new-in-safari-5

I missed the 'Blue Bar', I'm glad it has returned

How can I create a new iCloud account for a familiy member having a new iDevice and reuse one of my aliases for it

Hi there,
I moved into iCloud from the very beginning and started with one iCloud account for me and my family, making use of email aliases for family members. Now the number of personal iDevices grows and I want to create a new and separate iCloud Account for my son. The pity is, that I reserved his full name already as alias address on my initial iCloud account. If I now delete this alias, can I create a new account with the former alias as new primary email address?
Or is there at least any transfer procedure supported for aliases between different accounts?
Thanks for your help, lauterbachj

Couldn't agree more... the folks who are getting penalized for this are the early adopters of .Mac/iCloud dating from the days when the only way to implement a "family" account was to use aliases. Now all my kids' / my wife's name aliases sit in my account, unable to move. I guess the good news is that if I delete them nobody else will get them, but this seems a pretty poor consolation.
Would it really be so difficult to implement a "move this alias to another iCloud account" option that requires the "sender" and "receiver" to exchange some sort of code to implement the transation in order to prevent fraud?

New workcentre

Similar Messages

Maybe you are looking for