New Z table updation

Hi Gurus
We have created new Z table. Also a new Tcode for the report genetaion for COPA.
Let me know how do we update the table with daily data. Is there any standard job SAP has provided.
Replies are highly appreciated.
Regards
SAP only.

Hi,
If you need to update the Ztable you need to write a program and in program yu can use screens or
normal calculations depending upon the requirement, you can also use update modify along with insert commands in program,,
Thanks & regards,
Dileep .C

Similar Messages

Webdynpro abap-method for saving updated values in new database table

Hi Experts,
I am creating an ALV application in weddynpro abap where i have given update button to update fields & save button to save values in mastertable,but whenever i am updating & saving ,it will overwrit previous values. For this,I need to create a separate method to save the updated values of the fields in a new database table.
Looking forward for solutions.
Thank You!

becuase of the below statement u r getting the error
insert into ZTAB_CS_ISSSAL values Item_Dates.
u declared the field Item_Dates as Stru_Issuesal-DATES
and u were trying to inesrting the record in the table ZTAB_CS_ISSSAL with the field Item_Dates
the error is related to the compatible.
so declare work area for updating the table should be of type ZTAB_CS_ISSSAL.

How document numbers can be updated in New GL table

Hi,
We have SAP version ECC 5 and application patch level is 8. While we check balances of GR/IR Clearing A/c through FS10N in period 5 under credit posting which is being differed with FBL3N balances as Rs. 24,284.62. We have identified 5 document numbers are not updated in New GL table which are FAGLFLEXA and FAGLFLEXT and Rs 24,284.62 is being differed in GL Trial report as S_ALR_87012277. Here Debit and Credit figure is not matching rs. 24,284.62. New GL is not implemented in our company.
Therefore I would request you to kindly guide me how those 5 document numbers which are missing in new gl table can be updated those two tables are FAGLFLEXA and FAGLFLEXT.
Best Regards,
Anindita

Hi,
According your question what i understood is there is difference in the amount of FS10N i.e. GL balances and FBL3n Line item display ,the gl is GRIR clearing account the amount is showing GL Balance but the same amount is not showing in FBL3N right.
If yes goto FS00 and check line item display is selceted are not if not selected ,Select the check box and goto se38 and run RFSEPA01 program and then Then enter that GL account number and Document number 1 to 999999999 and company code and run & then check again fs10n and FBL3n it will match.
Regards,
Santosh kumar

New BIOS release - "Updated the ACPI SLIC table"

Hi.
Can anybody explain what "Updated the ACPI SLIC table" means in the new released BIOS update for Toshiba Qosmio x505? That explanation is really vague.

This Microsoft article should give you an idea what it's about.
You receive an error message when you try to activate Windows Vista or Windows 7 on a computer that ...
Don't ask me for more..
-Jerry

Will MEMASSPO or MEMASSIN work to update PO with new transit table data

I'm looking to refresh PO's (ME22N) with new transit table data. Would MEMASSPO or MEMASSIN refresh PO's, i.e. new delivery date, with the new transit data.
The only work around we have found is to go into each PO, add a text field and then save. We want to write a WinShuttle script to fix the thousands of PO's, but some PO's already have a text field, and the WinShuttle script will erase the text previously entered in the PO.
Thanks.

MEMASSIN will certainly not effect purchase orders, as it is the info record mass maintenance.
And changes in master data never effect already existing transactional data.
I dont think that MEMASSPO will effect any other table than the 2 tables listed (EKKO and EKPO)
But it is easy for you to just test it for a single PO with MEMASSPO, so you will immediatly know if it does or not.

DSO activation: Data in new data table but missing in active data table?

we use an end routine in transformation to populate a data field in DSO.
it works as we can see the value populated in new data table.
when we activate (activation) DSO, we see the value is deleted from this data field.
why?
this data field is set as an characteristic info obj in the data field portion of the DSO.
we are using 2004s, I forget to check the SP level.
George

good job ,thanks for the update and good luck.
I saw it late on this, else i never miss OSS notes
Chetan
@CP..

Sales Order Unable to Use New Condition Tables for Tax Condition Type

Dear All,
I am currently working on SAP R/3 4.0. I have a new requirement for my tax where I need to create new condition tables other than the 4 standard SAP tables which are Customer/Material, Division/Customer, Departure Country/Destination Country, Domestic Taxes and Export Taxes. My new tables consists of Departure Country/Destination Country/Shipping Point/Tax Code. The requirement is that the tax code is based on the chosen destination country and shipping point. The problem I am facing now is that no matter what types of table I create or even I generate with reference to the standard table, the access sequence will only refer to the 4 standard SAP tables above. Even if I put my own table in the highest priority for the access sequence, the same thing happens. My sales order will only pick up date from the standard table.
I wonder if anyone encountered the same problem as me.
Kindly advise.
Thank you.
Regards,
Yvonne

Hi
Yvonne
I suggest fist check a simple thing ,whether u have successfully determined shipping point for each line item ,it is possible that just adding a line item will not trigger shipping point determination . So after u update the shipping point on line level u can rerun pricing and check agian if u r getting it .
Secondly for tax purposes I suggest Try to have Customer and material tax classification approach this allows to u have long term flexibiliy and also reduces your maintenance activity . As if u change or add number of shipping points and business changes using the sequence of shipping point ,the logic of just using shipping point will not work.
In Tax classification u cna add new condition table for each new tax category and use it in different access sequences.
This information can be passed on to FI using Different Tax code for Different combination.
I hope this helps
Regards
Mandar

How to add new row and update existing rows at a time form the upload file

hi
How to add new row and update existing rows at a time form the upload file
example:ztable(existing table)
bcent                      smh            nsmh         valid date
0001112465      7.4                       26.06.2007
0001112466      7.5                       26.06.2007
000111801                      7.6                       26.06.2007
1982                      7.8                       26.06.2007
Flat file structure
bcent                       nsmh         valid date
0001112465     7.8     26.06.2007 ( update into above table in nsmh)
0001112466     7.9     26.06.2007 ( update into above table in nsmh)
000111801                     7.6      26.06.2007 ( update into above table in nsmh
1985                      11              26.06.2007   new row it should insert in table
thanks,
Sivagopal R

Hi,
First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
Then :
Loop at it.
*insert or modify as per your requirement.
Endloop.
Regards,
Srilatha.

Auto update of Ztable when ever BSID or BSAD tables updated

Auto update of Ztable when ever DB table updated
Hi experts
I want my Ztable get updated automatically when ever a record is created or updated in BSID or BSAD tables.
Here clear requirement
Generally using Company code & Allocation number ( 18 char ) my programs access BSID & BSAD tables it is taking very long time for execution almost more than 30 minutes ( data in millions ).
Step 1.
I created a new Ztable with limited fields Company Code, Customer, Document, Allocation Number and Posting date.
Step 2.
Before look into BSID or BSAD my program searches Ztable for Customer number & Document number using Allocation field and Company code.
Step 3.
Once get the Customer & Document numbers accessing BSID & BSAD table is very easy (now just taking less than 1 minute).
Created a new program to update Ztable every day but BSID and BSAD are live table so I want my Ztable get updated immediately when any entry posted in BSID or BSAD
Please help me
Satya
Singapore

You need to check what is the procedure (T-Code) from which the data gets updated into these tables.
For example
when we craete a material from MM01 the data gets updated in the corresponding table i.e. EKPO.
In same way you need to find the process and then you can use BTE (Busineess transaction events) for that process. BTE are only for FI module and these tables are also related to FI .

Varient table update with changes in sap table

Hi,
is there any way with which i can update a varient table with the new values in sap standar table.
example can be, i created varient table T_TEST, its having 2 characterstic MAT_1 and MG_1,
MAT_1 is key field and is is having material number from mara , MG_1 is material group.
so can i update my varient table automaticaly each and every time a new material is created ?
while going through SAP help i come across
http://help.sap.com/saphelp_erp60_sp/helpdata/en/23/0be7d831cb11d2909c0000e8a49aad/content.htm
but its for transfering data from varient table to new database table , i want it other way round.
please reply if you did it in past.
Thanks
Best Regards
Edited by: Ritesh on Nov 4, 2010 10:00 PM

technical teams got the ways to do it , closing thread.

How to capture the table update

How to capture the table update.Suppose I delete a enrtry from the table or mofying any entry in a table is there way to capture that update in SAP?

hi ,
follow these steps:
1. After you selecte the search help for New Responislbe person, domodify gets triggered.
2. In the wddomodify, get the value of New Responsible person by reading the attribute binded to it.
3. Now if Value entered is not initial, write a selecte query to fetch the name based on pernr no.
4. Finally bind the name fetched with the attribute binded to New Responsible person name.
Wdomodify :
************* *Read the New REsponsible person Pernr* ***********
DATA lo_nd_cn_sflight TYPE REF TO if_wd_context_node.
DATA lo_el_cn_sflight TYPE REF TO if_wd_context_element.
DATA ls_cn_sflight TYPE wd_this->element_cn_sflight.
DATA lv_carrid LIKE ls_cn_sflight-carrid.
* navigate from <CONTEXT> to <CN_SFLIGHT> via lead selection
lo_nd_cn_sflight = wd_context->get_child_node( name = wd_this->wdctx_cn_sflight ).
* get element via lead selection
lo_el_cn_sflight = lo_nd_cn_sflight->get_element( ).
* get single attribute
lo_el_cn_sflight->get_attribute(
    EXPORTING
      name = `PERNR`
    IMPORTING
      value = lv_carrid ).
****** *Check whethre a value has been entered in PERNR* *************
if lv_carrid is not initial.
*************Select Name based on pernr entered* ***********
select ename from pa001 into lv_ename where pernr = lv_carrid.
*******Set the Name atttribute with the ename value fetched* *****
lo_el_cn_sflight->set_attribute(
      name = `NAME`
      value = lv_cename ).
endif.

Configure Universal Adapter 2 generate New BAW Tables or use Existings OBAW

Hi Experts,
i have a doubt on if New OBAW tables have to be created as we add new subject areas from Universal Adapter Containers
or can use existing OBAW tables that are generated from Other containers.
For Example:
Our Existing contianer is PeopleSoft 9.0 and OBAW Tables are created usign Peoplesoft Container.
of all the subject areas from Peoplesoft Containers, Only Workforce Profile and HR Payroll is used.
as the container is created using Peoplesoft 9.0, all the Tables (532 tABLES) are created for all the subject areas.
now, we are planning to use Universal Adapters to configure rest of the subject areas like Absence Managementr and Recruitment because they are maintained by Third Party Vendors which have no relation with Peoplesoft.
my doubt is,
1. if i can use the same Existing OBAW Tables for Universal Adapters or create NEW OBAW tables using Universal Adapter container.
2. if ii have to create New tables using Universal Adapter containers, all the table belonging to other Universal Adapters Subject areas like Loyalty Analytics, call center analytics are also created by default. how to avaoid this. i tried to create OBAW by creating a container with Only HR-Absence Management subject area and Recruitment subject area, unfortunatley, all the tables are again created.
3. it looks like there are common dimension files used for this Universal Subject areas, is it Mandory to use them to Populate HR-Absence Managment subject area.
Please HELP
Is there is a good refernce guides on how to configure all this espically with Universal adapters in Out side world or in Metalink
Thanks
Kumar

Please take a look at this article which states SYSDATE is not supported in a
where clause.
http://www.oracle.com/technology/pub/articles/bpel_cookbook/qualcomm-bpel.html
Excerpt from the article:
Here are three important things you should do in implementing the above design:
Have the status of the record being processed stored in the database. The status includes the process state, next process attempt time, and processing attempt count.
Create an updatable view that exposes only records that are ready to be processed. A view is needed because the database adapter cannot handle a where clause that compares against SYSDATE.
Design logic that determines if a process instance that has faulted should be retried and when the retry should occur. This information will be updated in the database by use of a stored procedure. This can also be done with an update partner link and additional logic in BPEL.
mahalo,
a iii

Tables updating for atransaction

Hi All,
i wnat to know is there any transaction code or program to know the tables updated for a transaction.
we have a transaction called PPOM and FS00 ,i want to know which tables are updated when i create new records for these transaction codes.
With regards,
kiran I

Hi,
You can check tables CDHDR and CDPOS tables.
You can check the modified tables, values, by which transaction does this modification has been done.
Give current date to check. As these are cluster tables, it may take some time for retrieving data.
CDHDR - header details
CDPOS - item details
Regards,
Sailaja.
Dont forget to reward points, if answer helps you.
Message was edited by: Sailaja N.L.

Sql query to Load only new records,or update old records

Hi,
I need a query (not stored procedure) to insert only new records otherwise update existing records.
I tried by creating "Merge statement in SQl", but the sql query is wrong,it is not updating,always inserting records(replicating..1,2,4,8,16,32..).
below is my sample query,
Here "FACT_mytbl -FCT" is my fact table.(which need to update if already records found ,otherwise insert as new records).
*Inside select ---the table   E_tbl1,E_tbl2 is the business logic table ,using this two table only ,"FACT_mytbl" was created .So the "S" alias will be the source
table and "FCT" will be target table. based on this we have to insert or update records.
---Query starts-------------------------------------
MERGE INTO [FACT_mytbl] FCT
USING (
SELECT
FCT1.ID
,FCT1.PKcol1
,FCT1.FKcol1
,FCT1.col1
,FCT1.col2
, FCT1.col3
FROM [FACT_mytbl] FCT1 WITH(NOLOCK)
LEFT JOIN dbo.E_tbl1 CT WITH(NOLOCK)
ON CT.PKcol1=FCT1.PKcol1
LEFT JOIN dbo.E_tbl2 CT1 WITH(NOLOCK)
ON CT1.PKcol1=FCT1.PKcol1
) S
ON FCT.PKcol1 = S.PKcol1
WHEN MATCHED AND (FCT.PKcol1 ! = S.PKcol1 ) THEN
UPDATE SET
FCT.col1
,FCT.col2
,FCT.col3
WHEN NOT MATCHED THEN
INSERT VALUES
S.ID
,S.PKcol1
,S.FKcol1
,S.col1
,S.col2
, S.col3
--query ends----------------
any suggestions,
Thanks,
R.B

Hi Bhupesh_Rajasekaran,
According to your description, if you want to insert only new records which does not exist in destination and update existing records which does exist in destination. We usually accomplish these in two statement.
1.A join statement to update records.
2.A insert statement for new records.
Also we can use MERGE in SQL Server to insert, update at the same time. You specify a "Source" record set and a "Target" table, and the join between the two. You then specify the type of data modification that is to occur when the records between the two
data are matched or are not matched. For more information, there is an similar example about merge in SQL Server, you can review the following article.
http://www.codeproject.com/Tips/590085/Merge-in-SQL-Server
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

RAISING AN EVENT WHEN DATABASE TABLE UPDATES

hi all,
i want to raise an event when database table updates.For eg : if a price of a material has been changed then i have to raise an event and run the abap program in back ground.i know transaction SM62 to create event, i dont know about transaction SM64. please give me the procedure how to solve this problem. i dont know work flow. please give me a sample code how to raise event.
thanka and regards
suresh

Hi Suresh
It is important to understand that the SAP architecture abstracts the database from the application.
I think that you should look for ways that the application triggers an event when an update has taken place, rather than the DB.
Two ways of doing this that spring to mind are change pointers (for the ALE interface, see menu SALE) and Business Transaction Events (various things including CRM integration, see menu FIBF).
The latter works very well for sending prices to CRM when they change. I am more familiar with this than ALE so I will discuss it.
If you go to menu FIBF and then follow menu path Environment -> Info System (P/S), and then run the report for event 00503301, you can find documentation and a sample function module that you can copy.
Once you register your new function module in the event tables then it will be called when prices are changed.
Cheers
Dom

New Z table updation

Similar Messages

Maybe you are looking for