Newly created domain not available in current model?

Hi,
I'm not sure if this is a bug or feature.
I have a domain file MarketingDomain. This was copied from the defaultsdomain.xml and renamed. Also changed the name inside the file.
Steps:
Open Domains Administration - select current model
Select MarketingDomain.xml file as Domain File (In Choose Domain )
Add - create domain and Apply
Save
Exit domain administration
Open entity attributes
Then I can not find the domain in the list unless I import MarketingDomain.xml to the model.
The funny issue is if I create a new domain and not select any domain file in administration. Add domain and just select MarketingDomain under Domain Properties. This domain is instantly available in the model.
So there is a different behaviour when setting the domains file under "Choose Domain" or under Domain Properties after you click Add domain.
I'm using a Mac. Info:
About
Oracle SQL Developer Data Modeler 4.0.3.853
Version 4.0.3.853
Build 853
IDE Version: 12.1.3.0.41.131122.0230
Product ID: oracle.datamodeler
Product Version: 4.0.3.853
Version
Component Version
========= =======
Oracle IDE 4.0.3.853
Java(TM) Platform 1.7.0_67
Versioning Support 4.0.3.853
Properties
Regards
Stian Indal Haugseth

I think I get what you are saying but it's confusing until you learn it the hard way.
The Choose Domains file is only to administer domains not in the current/selected Model.
The Domains File drop down in Domain Property is used to add domains to current/selected model.
This is very strange behaviour and not a good flow. To create a new model and a new domains file:
Create model
Create a domain file in Administer Domains with some domains (These will not be visible in current model yet).
Import this new domain file to the model
From now on I can add domains by choosing the correct domain file in the dropdown
Regards
Stian

Similar Messages

Child domain not available when creating new mailbox in Exchange 2010

I’ve
installed Exchange 2010 in my environment with a single existing Exchange 2003
server. All current mailboxes are on the child domain. We have 1 root domain
(rootdomain.com) and 1 child domain (child.rootdomain.com). Currently,
we're in the coexistence phase and mailflow is working as expected. Today,
I created a new mailbox using EMC on Exchange 2010 and noticed that the
child domain is not available. Only the root domain is available?
Hopefully, I do not need to reinstall Exchange 2010. How do I go about adding
the child domain?

Did you domain prep the child domain?
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
From a Command Prompt window, run one of the following commands:
Run setup /PrepareDomain or setup /pd to prepare the local domain. You don't need to run this in the domain where you ran Step 3. Running
setup /PrepareAD prepares the local domain.
Run setup /PrepareDomain:<FQDN of domain you want to prepare> to prepare a specific domain.
Run setup /PrepareAllDomains or setup /pad to prepare all domains in your organization.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Urgent Requirement : Backend is not available - can a model be created ?

Hi,
Presently i am working in VC for BI 7.0. MY requirement is to create a model but the database model is under development and data is not available in backend this is the present situation but my client want's to have a demo of the UI.
1. will it be possible to model with out backend?
2. If possible how to store the dummy values in the model?
Kindly answer me.
With Thanks and Regards,
Ganesh.

That's difficult.
The best is if you have access to the database or a copy of the database, even if there are no values available. Then at least you can create the dataservices and see the fields for your forms, tables etc.
If you try any other form, like creating a fake database, then you basically have to remodel the complete application lateron.
You can store dummy values always through formulas, or by using a different database (e.g. a copy) where you maintain dummy data.

Newly created Image not listed via REST API

Hi,
I have created a image in azure console .Its created successfully and i could see the created image under "Image" tab in console.Also, the image created with the name appending current date, it was not before.But when I am trying to list images by
using the below REST API its listing images except the newly created images that have the name appended with current date.
https://management.core.windows.net/5f2fe4c3-23b3-45c0-a70c-9560b79dcf56/services/images
header values:
x-ms-version : 2012-03-01
Content-Type : application/xml
Host: management.core.windows.net
This makes me fail to launch new VM via REST api.I got the response as follows
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><Code>BadRequest</Code><Message>The image vmyffdd-20140605-813455l does not exist.</Message></Error>
Please look into this.

hi,
From the error, your request parameter was incorrect. I guess your image name may be wrong. How did you write your Image name and url? I suggest you don't forget the '.VHD'. Also,if you use the
VMImageName element which is only available using version 2014-02-01 or higher
And I suggest you could try this code sample about how to using REST api to create VM :Simple Windows Azure REST API Sample Tool
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Created application not available...

Hi to all,
I've installed SAP BPC,..I've followed to the post installation steps, and the only things weird is that I don't see the newly application that I've created in the list of the available applications when accessing through Microsoft Office (I see Finance, Legal, ecc...but not mine).
Any idea why?
Thanks
Daniele

Hi,
This happens when the member access profile is not maintained for an application. You can go to Admin and open your member access profile. You will find tabs for each of the application. You can refer to the existing applications and do the same for the newly created application. Then go to excel, click on connection wizard and login.
Hope this helps.

Wageytypes which are newly created are not showing up in the prod.server

Hi Experts,
I have newly created 2 new wagetypes.
1.Arrears on housing loan subsidy 2,arrears on Vehicle loan subsidy
They are properly showing up in Dev server and properly transported to Quality Server.IN Quality server also it is popping the new wagetypes through Infotype 0015 and system is calculating properly.
But in Production server i am unable to see the newly created wagetypes through pa30.It is showing the message that """Specified subtype is Invalid""
What could be the problem.Please advice me to sortout the problem.
Regards,
Sai.

Hi Sai,
Go to SE09 in the DEV system and search for the transport request that was created when you created the new wage types.
Click on the transport request and press the transport log icon (second icon from right on the menu) OR choose CtrlShiftF2.
This will display the details of all the activities performed with the transport request. As you have mentioned, the wage types are available in the QAS system, there should be an entry which says 'Import' for the QAS system.
If the tranport has been applied to the production system, then the same entry should be seen under the Productions system node. If you only find an entry that says 'Selection for Import', then the tranport has not been applied OR if there are any errors, the same will be highlighted in the log.
I hope this makes sense since it is difficult to explain the steps to analyse a transport request in a message. Let us know how it goes.
-Akshay

I have an iPod touch that was given to me, so I don't know much about it. It's an ios 6.1.5. The iPod Touch guide mentions Siri, but I don't see it in my Settings. Should I assume Siri is not available on this model?

I have an iPod touch that was given to me, so I don't know much about it. This is the first Apple product I've owned. The specs say it's an iOS 6.1.5
(Model# MC540LL/A) The iPod guide mentions Siri, but I can't find it in the Settings. Should I assume Siri isn't available on this model?
Also, can you tell me how old this iPod is, from the model #?

it could be a 4th gen or lower, if the camera dosent stick out, then its a 4g,
however, it could be a 5g (the only model to have siri) it might of been disabled, to enable siri, you have to reset your ipod touch, then when it a says, use siri? tap use siri.
also if you mesure the screen and it is 3.5 inches then it is a 4g or lower and does not have siri. but the 4g has voice control and its offline, and siri cant be used offline.
i hope this helps.

Newly created index not being used

Hello friends,
I am observing that a newly created index on a z table with mandt & a new field is not being used. I have already rebuild index & updated stats for table.
when we query on this table with where clause having same 2 fields mandt & other.. we expected this index to be used. This table is very large. What more i can do now ?
In trace/SQL session, we can see it is going full table scan.. and takes very long time.
this new field contain no data as of now for all existing rows. Is this the reason ? or sometihng else ?
SQL Statement
SELECT
FROM
"ABSA"
WHERE
"MANDT" = :A0 AND "ZABCD" = :A1
Execution Plan
Explain from v$sql_plan not possible -> Explain from PLAN_TABLE is displayed !
No values in v$sql_plan for Address: 0000000166710240 Hash_value: 3891403872 Child_number: 0 Sql_id:
SELECT STATEMENT ( Estimated Costs = 905.739 , Estimated #Rows = 110.190.667 )
        1 TABLE ACCESS FULL ZABSA
          ( Estim. Costs = 905.739 , Estim. #Rows = 110.190.667 )
          Estim. CPU-Costs = 152.614.535.266 Estim. IO-Costs = 899.784
          Filter Predicates
NONUNIQUE Index   ZABSA~Z01
Column Name                     #Distinct
MANDT                                          1
ZABCD                                         1
thanks & regards
ashish
Edited by: ashish vikas on Mar 3, 2012 9:05 PM

ashish vikas wrote:
> Execution Plan
> Explain from v$sql_plan not possible -> Explain from PLAN_TABLE is displayed !
> No values in v$sql_plan for Address: 0000000166710240 Hash_value: 3891403872 Child_number: 0 Sql_id:
>
> SELECT STATEMENT ( Estimated Costs = 905.739 , Estimated #Rows = 110.190.667 )
>
>         1 TABLE ACCESS FULL ZABSA
>           ( Estim. Costs = 905.739 , Estim. #Rows = 110.190.667 )
>           Estim. CPU-Costs = 152.614.535.266 Estim. IO-Costs = 899.784
>           Filter Predicates
>
> NONUNIQUE Index   ZABSA~Z01
> Column Name                     #Distinct
> MANDT                                          1
> ZABCD                                         1
Hi,
with this WHERE clause, both columns just one distinct value, the Full Table Scan is indded the best approach, beside
the point you only need a check to evaluate a value is NOT in the result.
In this case you should HINT the statement to the new index, because the DB will always assume that this index is non-selective.
Volker

CREATE DOMAIN not working

Hiya,
I am reading a book on SQL and DDL. Was trying to use a CREATE DOMAIN which I find a very useful option and which is ISO standard, but it is not supported by Sql Plus in Oracle 9i Personal. Is it me, or is it not supported full stop?
Please help.
Emil

Thanks for your reply.
This is very strange that this very important function is not supported. I am not sure if there are other implementations of this function in the Oracle 9i? Imagine if you had to change a format of postcode once, would it not be easier to do it once in the CODE rather than changing everywhere where postcode appears. Hmmm, what do you think guys?

Why would a newly-created OCMD not be written to the PDF?

I'm concatenating a content stream from a second PDF onto the page content stream of a first PDF. Graphics and structure are working fine, but optional content is failing because the OCMDs I'm creating are being written as free objects.
The function is passed an element from the second PDF's content stream. If the element is a container, the following is executed. I'm leaving out steps related to structure, because it works. Graphics also work. Even newly-created OCGs make it into the output PDF. I'm guessing the OCMD isn't written because there is no reference to it? But I though the PDEContainerCreate() call would create that reference.
1. Create an OCG with PDOCGCreate().
2. Create an OCMD with PDOCMDCreate(). The OCG is set to control the OCMD.
3. Create new container with PDEContainerCreate(), passing the new OCMD.
4. Check the CosID of the OCMD.
5. Create new content with PDEContentCreate().
6. Assign the new content to the new container with PDEContainerSetContent().
7. Add the container to the first PDF's content stream with PDEContentAddElement().
8. Add all the sub-elements of the element from the second PDF to the new container.

Things are always clearer in the light of morning. Passing false for the inline argument to PDEContainerCreate() is the cause.

Newly Created items not seen when creating a quote

Hi,
I created a new item and now I am trying to add this item in the my new quote. I cannot find the item. Is there any concurrent program or any setup I need to do so that it reflects in the quotes. Please help as I am new to this and not aware of the functional setups for this.
Thanks in advance.
Regards,
Bm

Hi,
Please review the following document:
Cannot find items to add to a Quote (Doc ID 340933.1)
Excerpt from this document:
1. Determine where the application is searching for the item by checking the value for the profile 'ASO: Enable Intermedia Search'
     If set to Yes - both the interMedia Search and Inventory tables are searched
     If set to No - only the Inventory table is searched
     Note: In R12, the HTML UI will always use the interMedia search.
2. Verify the inventory item meets the following criteria:
A) The current date must be within the start and end date range set for the product
B) The product must be valid for the inventory organization of the operating unit in which the quote is created.
C) The product must be in the default category set defined for/in the functional area "Order Management."
Inventory Organization is determined as follows:
- Quoting UI first reads the value of profile ASO: Category Set.
- If this profile is not set, it reads from OM functional area.
    (Navigation -> OM > Setup > Items > Categories > Default Category Sets)
using the OM responsibility which points to the same OU as the Quoting responsibility.
D) The product must have the "Customer Orders Enabled" flag enabled..
E) The BOM Item Type must be Model or Standard.
F) The Primary UOM is not ENR.
3. If the interMedia search is enabled, make sure the iStore Search Insert concurrent program was run to populate the interMedia search table.
See Note 261454.1 - 'How to reduce the number of records inserted by iStore Search Insert?' for information on the profiles that determine which items are inserted into this table by the program.
See Note 1263758.1 - How To Locate which Responsibility the iStore Search Insert Concurrent Program can be run from?
Note: Only interMedia Search is supported in R12 HTML Quoting. Hence, it is enabled by default.
Additional troubleshooting queries are in this document.
Regards,
Debbie

Business Components not available while using Model Configurator in ID

Hi,
In ESR:
I created a ProcessIntegrationScenario PIS_myScenario (and completed with sender and receiver components, actions etc)
In ID:
I created and activated two BusinessComponents: BC_A and BC_B
I created a new Configuration Scenario: CS_Test, and selected Type of ES Repository Model:"Process Integration Scenario".
and launched "Model Configurator".
Now in the step "Assign Components" i see a tab "Assign Business System Components for A2A Configuration" , in that for "Communication Component" value, when i tried to select from the value list, it is only showing the Business Systems and not the Business Components BC_A and BC_B.
By using the "Model Configurator" how can we create scenarios using the "Business Components" instead of "Business Systems".
as i am trying the test scenarios, i want to use Business Components, i.e business services in earlier versions.
I also opened the Business Components BC_A and BC_B and added the corresponding inbound and outbound service interfaces in the receiver and sender tabs.
after that also, the Business Components are not visible for selecting from within Model configurator.
let us know if its possible

thanks abhishek for your reply.
as mentioned in the reference link given by you, i edited the Process Integration Scenario in ESR, i ticked the checkbox "External Party with B2B Communication", and activated.
In ID, in Model configurator, i can now see and select the Business Components BS_A and BS_B.
but when i try to generate the configuration objects, it says: Not Configurable: Component view only contains external application components.
so cannot proceed with Model configurator with Business components, in my scenario.
seems i need to use only Business Systems.

New Business Method in EJB not available in Webdynpro Model

Hi,
I am using EJBs for Business Logic in my webdynpro java application. I have added a new Business Method in one of the session bean. But I am not able to see the new method in webdynpro model. I am following the below procedure -
1. Select the Session bean.
2. Add New Business Method. It automatically adds the method in Remote and Local Interface.
3. Implement thie new method.
4. Build EJB project
5. Add it to EAR
6. Build EAR Project
7. Deploy EAR Project
After following above steps, when I am trying to create a model in my webdynpro project, it does not reflect the changes (context returned by new business method).
Can any one help me on this ?
Thanks in advance,
Gaurav

The issue is resolved. This is the case where methods in beans returns collections. For such scenario, relations have to be created manually, it does not come automatically. For details refer the blog at below link --
/people/balaramnaidu.bankuru/blog/2006/04/23/importing-complex-javabean-model-into-webdynpro-by-creating-relationships-for-the-model-classes
Thanks everyone.
Gaurav

Newly Created Branches not showing up for Recruiter in the Requisition.

Hi,
We have created Branches as Administrator and the Branches are not showing up for Recruiter when trying to create the requisition. Any suggestion on this will be great help.
Thanks.

Hi,
the most common reason for branches not showing up is caused if someone does not use the frontend for administrator but the IMG nodes for creating branches and assigning to companies. This is caused by missing bp role assignment.
So check the branches in TCODE BP that they have the role for e-recruiting branch assigned. The standard delivey uses bp role RCFBRA but this can be changed in T77S0 RECFA BRARO.
Furthermore you should check if T77RCFBRANCHCOMP entries are ok.
Kind regards
Roman

Newly created FKs not imported in DB diagram

Hi there
I am using database diagrams functionality in JDeveloper 10.1.3.3.0 to document an existing Oracle 10g database. I am finding it great, but I am having some problems with FKs.
What I did:
1 - I created a connection to the schema I want to import the tables from.
2 - I created a new DB diagram.
3 - In the connections navigator, I opened the tables node in my database connection and dragged a few tables into the diagram.
4 - I realised that a couple FKs were missing (they were physically missing in the DB). So I created them in the DB.
5 - At this point, I would guess that selecting Refresh From [dbconnection] on the respective offline database table in the apps navigator would import those new FKs into the diagram, but that didn't happen. To solve it, I had to restart JDeveloper and then it correctly identified and imported the missing FKs.
Am I missing something? Why did I have to restart JDev?
Thanks
Luis

Hi Jaap,
thanks for your reply...
Sorry for being a little unclear ...
I have followed the instrunctions in the on-line help of OWB , and :
1) have imported four code tables into a source module . The tables are in an Oracle RDBMS 10g .
2)I have created manually a table - using the OWB client tool - which consisted of some of the columns found in the four tables .
3)I have inserted a Join Operator in order to correlate the four table columns with the columns of the target module.
4)I have defined the Join condition of the the four table columns. In my first post , unintenionally I have written that I removed the Join Operator. I meant the Join Condition in order to make sure that the join condition isn't the reason that the records are not inserted....
5)I have validated and generated the mapping without any errors - not even warnings.
6)I have selected Project->Deployment Manager and I selected the OWB_RUN user - which is the Runtime Repository owner.
7)I have selected the objects to deploy - the mapping , the one table I created in the target module. The deployment has succedded , and the table was created but no records are found in it.
Now , is there a possibility that this problem is caused by absence of the privileges to insert the rows...?
How can I check that the source tables are filled on the registered location of your source module?
Another basic question...
I have created a Runtime Repository owner - called owb_run- using the Runtime Repository Assistant . I use this user in order to deploy the mapping and the new table. I want -and it is created- that table in another schema (user his_dw) - even another database in the same server. Should I run the Runtime Repository owner in this schema (his_dw)???
Thanks , again a lot
Simon

Newly created domain not available in current model?

Similar Messages

Maybe you are looking for