Newly created "Faces" disappearing or merging with another "Face."

Overall, I was fairly pleased with the accuracy of Faces. And after an exhaustive amount of time I had all my Faces setup, or so I thought.
I noticed upon relaunch my friend Audrey's Face had disappeared. I then went to her husband (who looks distinctly different) and her pictures were under his face. The only thing I could think of is when I filled in her name, full name and email I used the same email address for both people. Perhaps the files are being coded with that conflicting information and Faces is confused and doesn't know where to place them. So a day later I went back and straightened it out putting her Faces in her own group. But then it did it again, only this time "Russ" her husband disappeared and his pictures were under her face.
The only other thing I can think of is a conflict with Facebook. I do remember uploading a picture and having to fix a few tags when the image was in Facebook. I'm wondering if Facebook was sending back bad information to that photo that was confusing the entire Face group. Other than that I'm at a loss.
I've rebuild the iPhoto databases selecting all the available options to ensure a good clean file. But that didn't fix this problem.
So since this appears to be a bug I won't bother trying to fix the two Faces again until it's fixed. Does anyone know if I can disable Faces or have some sort of control over how it operates? I'd like to disable it without losing the Face groups already created so it doesn't screw up another group with this bug.

I had the same problem with having previously named and labeled faces over-ridden and given other names. But I'm not using facebook, so it has nothing to do with that. I have spent hours and hours fixing my faces albums, just to have the names changed and put in different albums the next time I look at them. What in the world could I be doing wrong?

Similar Messages

  • The newly created row cannot be found with another view

    I'm building a JSP client based on BC.
    I have 2 views based on the single entity.
    I'm creating a new row with one view and want to edit the corresponding row with the other view without intermediate commit.
    However, the last view cannot find the new row.
    For the purpose I get the newly created row's key and trying to find the row at the other view by it's RowKey with the tag <jbo:Row>. Now I have an exception:
    oracle.jbo.JboException: Row was not found using request parameter ...
    Can someone give an advice, please?

    Hi,
    I was a little uncertain. I do not have any view associations in this case.
    I've tried to use " .setAssociationConsistent(true)" - dosen't help.
    I've just changed the standard wizard-generated Browse-Edit UIX/JSP form in such way that I'm using one VO for the browse-table jsp, and some other VO for editing jsp. The editing jsp is by itself divided into a number of tabs.
    Every tab of the editing jsp is based on a specific VO and all of the VOs are based on the single Entity Object to the one table.
    While I am editing the existing records in the table everything goes right, but if I create a new row via the browse page and then try to edit it, I have the exception:
    " Row was not found using request parameter: .... " This thread is continued in another post
    Re: ORA-03113 end of file on communication channel error
    There is a bug with hanlding of viewlink-consistency and DBsequence in Jdev 9.0.2 that leads to this issue as discussed in the other thread.

  • My usual iCloud account has been locked out.  I tried the email link - didn't receive an email.   So I created a new Apple ID with another email but now I can't access my other Apple ID Mail, etc..

    My usual Apple ID/iCloud account has been locked out.  I tried the email link - didn't receive an email.   So I created a new Apple ID with another email but now I can't access my other Apple ID Mail, etc..  How do I get the Apple ID I want to use working again?   Help. 

    Hi JkeeneSoldano,
    Thank you for visiting Apple Support Communities.
    To regain access to your Apple ID, try to reset your password using one of these methods:
    Answer your security questions. Use these steps if you know the answers to your security questions.
    Use email authentication. We'll send you an email that you can use to change your password.
    Use two-step verification. If you set up two-step verification, you can use it to change your password. You just need your recovery key and a trusted device.
    From:
    If you forgot your Apple ID password - Apple Support
    If you need to use the email verification method but don't receive the reset email, see this link for more help:
    If you didn't receive your verification or reset email - Apple Support
    Best Regards,
    Jeremy

  • Company is merging with another company. How do I add other company's Bonjour/Messenger buddy list to our company's Bonjour/Messenger buddy list?

    So the company I work for is merging with another company. Our company already has an internal Bonjour/Messages set up so that we can all communicate to each other. The company that we're merging with has the same.
    How do I merge their Bonjour/Messenger Buddy List with our Bonjour/Messenger Buddy List so it's all in one list?
    Much thanks!!!

    Hi,
    It will depend how and where the other computers are.
    Broadly speaking any Mac computer on the same LAN using iChat or Messages with the Bonjour account enabled will see all the other Macs (The app reads the computer User's Contacts App (Address Book) My Card and broadcasts the name)
    This works up to the point you go beyond 255 computers or devices.
    The router will have one IP allowing for 255 devices to be connected.
    To state this another way.
    The Bonjour account in Messages or iChat is a self connecting, self populating Buddy list.
    Your Name is read from the Address Book on older systems or the Contacts app in Mountain Lion and above  at the one called the My Card and this is broadcast as your "Screen Name".
    You see the names in the Buddy list that correspond to other peoples My Card.
    On this iMac I am using I am "Ralph Johns"
    On my G4 tower I am "Ralph G4" and on my laptop I am "Ralph MacBook Pro"
    This means if I hook up the three using Bonjour I know which is which.
    (As an aside this also allows me to separate them out on AIM and Jabber lists as well as I have the My Card for this computer and Address Cards for each others)
    7:51 pm      Friday; February 14, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I want to create a new apple id with another email, It says email already in use...

    I want to create a new apple id with another email, It says email already in use, but there is no account with that email( i use it for facetime and get apple offers) What do i do?

    You can check to see if it is associated with one of your IDs by following this: http://support.apple.com/kb/HT5625, and entering the email address at step 2 to see if it finds an ID owned by you.  If it doesn't, contact the Apple account security team and have them check into it by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Apple ID account security.

  • How to create hyperlink in a page with another website

    like we can link email links and hyperlinks (with other
    files) how do i make link with another website like
    in my home page i say www.indiatoday.com and i want that when
    one clicks on www.indiatoday.com this site opens
    how do i create a link using dreamweaver without having to
    code manually.

    "pandeya" <[email protected]> wrote in
    message
    news:f66jl8$72b$[email protected]..
    > like we can link email links and hyperlinks (with other
    files) how do i
    > make
    > link with another website like
    > in my home page i say www.indiatoday.com and i want that
    when one clicks
    > on
    > www.indiatoday.com this site opens
    > how do i create a link using dreamweaver without having
    to code manually.
    Select the text www.indiatoday.com. In the Property
    Inspector, in the Link
    field, type the full URL -
    http://www.indiatoday.com.
    Click OK.
    You might want to use the Help documentation for really basic
    questions like
    this..
    Patty Ayers | Adobe Community Expert
    www.WebDevBiz.com
    Free Articles on the Business of Web Development
    Web Design Contract, Estimate Request Form, Estimate
    Worksheet

  • How to best take sections from one document to merge with another Indesign document

    I am looking for most efficient way to take a section from one document to merge with a section from another document?  We have a book that needs updating, taking a section from one document to merge into another.  We have typically copied and paste each page, but there are 20+ pages involved.  Does anyone have a better way?

    Open both documents.
    With source document active, In pages panel, select pages that are to be copied to the destination document
    Right Click (or use panel menu) and select Move Pages ...
    Double check that correct page range is noted
    Select destination document
    select where in document pages should appear (beginning, end, after or before page X)

  • Creating mailing labels using merge with Pages

    Something I can do easily in Word seems impossible in Pages 09 (which I've begun using full time instead of Word and find it much more stable and easy to work with).
    I have a postcard size document which fits on a third of an 81/2 X 11 page. So I have three repeats on the page. Follow so far?
    I want to merge people's names into the postcard - three different names on a page. What I can't figure out is how to tell the merge to go to the next records for the second and third cards on each page! Easy to do in Word - I just drag and drop <Next Record> before the merge fields forpostcards 2 & 3.
    There doesn't seem to be that possibility in Pages. I get three postcards the same on each page - the next three (the second record) all the same on the second page, and so on for each subsequent page. I don't want three identical postcards per page! I want cards with three different names on the same page.
    Does anybody have an idea how this might be done or do I just do it in Word?

    Peter
    I was able to track down the script. Thanks.
    Definitely a complicated way of doing something that's relatively straightforward in Word. Guess I'll have to stick to Word for creating these kinds of merge documents! Too bad, really.
    Judith

  • Is there a way to name the .indd files created by a data merge with values in the CSV file

    I have a data merge document that is set to single Record per Document page and 1 page per document.  In my CSV file I have a field for Part Number.  If I run a data merge with 10 records I end up with 10 .indd files.  I need a way so that the resulting .indd files are named the same value that is in the Part Number field.

    Loic has provided a link for my original piece, and I've written up some follow-up pieces for indesignsecrets.com:
    http://indesignsecrets.com/data-merging-individual-records-separate-pdfs.php
    http://indesignsecrets.com/data-merging-individual-records-separate-pdfs-part-2-scripting. php
    So there are several ways to get unique name PDFs from an indesign Data Merge. However, none of these 3 articles will truly answer your question of how to get unique indesign filenames using the database. I can see a practical purpose for this as merging business cards directly to PDFs is great, but I can be guaranteed that while on proof, there will be alts to the business cards that need to be done outside the merge, meaning specific records need to be exported to indesign files for further manipulation.

  • Begin Fill merge with another fill

    Hi all.
    Got a problem.
    In the below example (if you paste into a new fla with AS3)
    you will see that the two squares sit on top of each other. This is
    not what I want for a few reasons. I am makeing a brush type tool
    that needs to update the shape every time the mouse moves etc.
    Is there a way I can make the fill merge with the last fill
    rather than sitting on top like a layer. (Surely there must be a
    way)
    If not can you suggest a way I can do somehting similar. It
    is not possible to redraw every fill every time as it would slow
    down very quickly.
    I goal is to have the user use a square brush. (If a round
    brush I would simply use the lineTo to do it quite easily)
    var shapeClip:Shape=new Shape();
    addChild(shapeClip);
    with(shapeClip)
    graphics.lineStyle(.25,0x000000,0);
    graphics.beginFill(0xFF0000,.5);
    graphics.moveTo(10,10);
    graphics.lineTo(50,10);
    graphics.lineTo(50,50);
    graphics.lineTo(10,50);
    graphics.lineTo(10,10);
    graphics.endFill();
    graphics.beginFill(0xFF0000,.5);
    graphics.moveTo(30,30);
    graphics.lineTo(70,30);
    graphics.lineTo(70,70);
    graphics.lineTo(30,70);
    graphics.lineTo(30,30);
    graphics.endFill();
    }

    Hmm. I've done a lot of investigation and I'm pulling my hair
    out with this one.
    Surely therre must be a way to merge two shapes
    together?

  • Newly created BP disappears with the synchronization

    Hello all,
    Once I create a new BP, save and synnchronize it with the server, it is disappearing from the UI. We need to explicitily search for it to see the details. This is not happening when we edit for the existing BPs. Can anybody point what could be the problem?
    Kindly note that we are in SP 12 upgrade.
    Best regards,
    Swarna Seeta

    Hi Swarna,
    When you go directly to BP/Details and add a new BP, it does not show after saving because of some custom code which might be written in the UI.
    When you go to BP/Details it shows a empty tile because in standard solution, the anchor modelling has been done such that the BP query execution is not set as implicit. This is done because if an empty query is fired there could be performance issues loading the tileset.
    You have following options -
    1.Try to debug and find why after saving the BP, the tile is getting empty because if you have not entered a search criteria and have directly come to BP/Details then the new BP should fit the empty search criteria.
    2.Another way (which might have performance impact) is to make the BP query execution implicit by changing the settings in the component MSABusinessPartners.This will make sure that when you go to BP/Details an empty query is fired in the background.
    option 1 is the best one.
    Regards
    Vivek

  • Error while creating sales order for material with another DIVISION

    Hello Friends,
    I have a problem with my sales order creation.
    I have defined a new sales area 0010 / 10 / 01. I have the sales order type assigned to this sales area. (in VOV8 for the sales order type, in the 'General Control' the 'item division' is flagged.
    Now, I have created the sold to party XYZ with all the partner functions defaulted same as the sold to party for the sales area 0010 / 10 / 01.
    NOW, I have the material ABC with the DIVISION 10 in the basic data. I have extended the material to my sales org & dist. channel & plant.
    Now, while creating the sales order for my sales area 0010 / 10 / 01 , I enter the sold to party XYZ - it is OK. But when I enter the material ABC, I get the error - "SHIP TO PARTY IS NOT DEFINED FOR SALES AREA 0010 / 10 / 10"
    Please help to resolve the issue.
    Edited by: Vivek on Aug 13, 2009 9:04 AM

    Hi
    Common division for Material Master data will not work
    Because in the material master Division is a field not an organizational unit
    Means when you create MMR you will give sales org, DC, Plant  as organizational units and then enter but not division
    Division is a field maintained in basic data and sales org data 1
    This is the reason in t code you will find in t code VOR2 Common division only customer and conditions but not materials
    But in t code VOR1 Common DC ,customer  conditions and materials all there are available (you can check these t codes)
    Coming to your issue Item div is clecked in your order type
    This means the division in MMR has the priority or control for that order type
    Your header division is 01 ( taken from customers sales area) and item division is 10 (taken from MMR as per your post)
    So it differs
    To process this order with Item div is clecked in your order type you need to extend your Sold to party ABC to the sales area 0010/10/10 (the sales area where the division of the material falls)
    or alternatively
    There should be a  customer say DEF created in sales area 0010/10/10 who will be a ship to party ( your error is also the same)
    for your ABC  that is sold to party in sales area 0010/10/01 where the order is registered
    Hope yopu are getting it
    ABC in sales area 0010/10/01 will have  or should have ship to paty DEF  in sales area 0010/10/10 
    or
    ABC should operate in in sales area 0010/10/10  too
    If item division is not ticked then these are not necessary as the header division 01 will be valid for all items and syatem will not look MMR at all for division
    Regards
    Raja

  • My bank merged with another bank and each time I logon a window from them tells me my browser has security concerns and needs to be updatedneeds to be updated.

    I've attempted to update my browser and it tells me I'm up to date. But the "Looks like you're using an older version of Firefox" remains on the screen after update attempt.
    I'm using Windows XP....is that causing the problem?

    Your user agent identifies you as Firefox 28 on Windows NT 4
    *Mozilla/5.0 (Windows NT 4.0; rv:28.0) Gecko/20100101 Firefox/28.0
    Make sure that you do not run Firefox in compatibility mode.
    You can open the Properties of the Firefox desktop shortcut via the right-click context menu and check the "Compatibility" tab.
    Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
    See this for issues with the user agent:
    *https://support.mozilla.org/kb/Finding+your+Firefox+version
    *https://support.mozilla.org/kb/websites-say-firefox-outdated-or-incompatible
    If you really run Firefox 28 then you need to update to the latest release.
    You can find the full version of the current Firefox 35.0 release in all languages and for all Operating Systems here:
    *https://www.mozilla.org/en-US/firefox/all/

  • HT1365 my newly created network disappears

    I am running a small business, small network.  All Mac.  4 computers and 2 printers. I have two computers on ethernet and 2 using wi-fi for connection to the internet.  Everything is working fine.  I have just purchased a 2 multiuser Quickbooks 2013 for MAC, I installed the app on the 2 ethernet computers, and an existing Quickbooks data file on one of the macs.  I created a new wi-fi network on one of the macs to use as a dedicated network to share the data file.  It is working fine, the two computers can share the file.  The problem is the one of the computers drops the connection too often and has to be restarted. I am using a Cisco Router.

    Ok i will Explain in more detail or give you a picture as to what i want to do.
    I have a MacBook as listed below it has 802.11n and i have a apple tv 160 gb. But no 802.11n wireless router only a 2wire 802.11g. and the 2wire does not like the leopard os i can't use it part time. only
    the hp laptop works all the time.
    Well any way the wireless router only transmits at 64 mbps. And ethernet transmits at 100 mbps but i don't like to half to hook up my MacBook to it all the time.
    Well My computer has a 802.11n card and so does the apple tv.
    So i have to create a wireless on my MacBook and then get to connect the apple tv to it. Which is easy. So then i can transfer my movies to it at 200 mbps and be done within minutes.
    Well once i am done i reconnect to my wireless router so i can get on the web.
    Well when i go back to transfer something to my apple tv i have to resetup the network i also use a pass code so others don't try to join my Macbook.
    I have tried to make a second location but it did not work.
    So any help would be great maybe an apple script or something.

  • Use brush mask with another adjustment brick?

    Hi. I'm pretty sure this is not possible, but I want to make sure and find out if anyone has a work-around.
    Is there any way to re-use a mask created for one adjustment brick with another?
    This would, IMHO, double the usefulness of the program. (I can't really understand why it is not included.)

    You cannot from within Aperture but you can... if you feel like going into the guts of the library. The brush masks are stored as simple tiff files if you create and adjustment and brush any old mask the tiff file will be created - copy the mask you want to the same file name as the mask you just created and viola = reused mask. Not a simple and easy solution.
    Much easier just to use PS IMO
    RB

Maybe you are looking for