NF-e issue: NF-e document 8 is not defined

Hello SAP Folks,
I received an error in 2 diferent NF-e, they are stucked, and I'm not sure how to fix it, in GRC system they show an error (ERP Error 105) and if I try to update it i got the message described in the subject (NF-e document 8 is not defined) any idea of what should be wrong?
Thanks in advance
Raffi Q.

Hi,
Find the below link releate to Brazil - NFe, which may help you.
http://help.sap.com/saphelp_46c/helpdata/en/43/0bd40843de11d1896f0000e8322d00/frameset.htm
t/r
Gopinath

Similar Messages

  • Err in PO creation-Sales document item is not defined for this transaction

    Dear Consultants the errror  occurs when we process  Individual Purchase Order scenario.
    Err in PO creation-Sales document item is not defined for this transaction  
    Thanks&Regards,
    SanthaRam

    This error because the item category is not determined correctly in the sales order.
    Check the item category in Sales order line item, for Individual Purchase order scenario its TAB.
    If its not TAB, then check the assignement for Item category in VOV4.
    This thread is more of the SD part, so also put it in SD forum for better solutions.
    Regards,
    Sheetal

  • Document parking is not defined for special G/L transactions

    Dear All,
    I want to post a document with a special G/L indicator in F-65 . But I got an error message  FP030 - Document parking can not be carried out . 
    Is anyone to got this message ?
    Thanks
    Dash

    Dear Erdif,
    this is right, you can not make document parking for  down  payments and bills of exchange.
    But It is possible for Sp.GL indicators with Sp.GL transaction type "OTHERS"  (look in FBKP  select SPGL indicators and select button  Proporties)
    Best Regards
    Your error message should be same like this below one:
    Special G/L transactions not defined for bills/exch.and down pmnts
    Message no. FP030
    Diagnosis
    You have selected a posting key with a special G/L indicator of type 'Bill of exchange', or 'Down payment'. Document parking is not defined for special G/L transactions of the type 'Bill of exchange' or 'Down payment'.
    System response
    Document parking cannot be carried out.
    Procedure
    Select a different posting key or special G/L indicator. If the posting is a 'One-time posting' to a rent contract, select a different transaction type or post the document directly.

  • F104 (ERROR: Document type SA not defined)

    Hello,
    Error posting Provisions for doubtful receivales via F104.
    The document type SA not defined!
    I need to create document type SA, or i can use a existing one?
    If i need to create SA, can i create it from a document tyoe model?
    Best regards,
    Bruno Valente.

    you can select SA document for the transaction. or you can create new docment in tcode fbn1

  • Sales document type is not defined for(sales org/division/distribution chan

    Hi Friends,
    I am getting the error that sales document type is not defined for x/y/z(sales organisation/division/distribution channel). while creating sales order.
    Any pointers will be rewarded.
    Regards

    Hi there,
    When you define a sales doc type in VOV8, you also should assign that to the sales area SA (sales org / dist channel / division).
    Only then you will be log a sales order for a sales area.
    Check if you have done it. You will find it in SPRO --> Sales & Distribution --> Sales --> Sales doc header --> Assign sales doc type to SA.
    Regards,
    Sivanand

  • Sales document item is not defined for this transaction in Pur.Order

    hi,
    At the time of convertion of pr to po one error message received.
    Sales document item 46 000010 is not defined for the transaction
    Message no. V1198
    Diagnosis
    You have tried to carry out a business transaction for this sales and distribution document item which, for this item, is not allowed.
    This may be due to the fact that this item is not part of a make-to-order production with cost management in the sales order.
    Procedure
    Please check your entries.
      this is MAKE TO ORDER SCENARIO  THIS ERROR IS FOR RAW MATERIAL  CONVERTION  AGAINST SALES ORDER.

    Hi,
    Check in material master MRP3 view there is field called strategy group where you have option to define the planning strategy like make to order/make to stock & like.
    Regards
    Ravi Shankar.

  • Err in PO creation-Sales document item is not defined for the transaction

    Hi,
    I am getting the following error while creating PO
    "Sales document item 30000183 000100 is not defined for the transaction
    Message no. V1 198
    Diagnosis
    You have tried to carry out a business transaction for this sales and distribution document item which, for this item, is not allowed.
    This may be due to the fact that this item is not part of a make-to-order production with cost management in the sales order."
    I have used an item category which is copy of TAB and the sales order line item is attached to WBS element.
    can any one guide me what needs to be done.
    thanks

    If you want the sales order creation to initiate a PO creation automatically, check if the "Create PO Automatically" button is ticked on for the item category in Transaction flow tab in tcode VOV7
    This will solve your problem, provided your configuration for PO on the MM side is fine.
    Reward if this helps.

  • ASKB(N): document type do not defined

    Hello all!
    When I start ASKBN befor  AFAB (sistem 6.0) I got a message "Document type  for periodic APC posting does not exist". Message no. AC197
    But when I went to OBA7 and look through the type AN with Net asset posting and tried to define the interval for it in FBN1, this interval was already exist and 4 document was posted. I set this interval for aquisition postings (abso). What to do with ASKBN? Or what document type should be defined for ASKBN?

    Hi,
           Go to IMG and assign the document type in the Path:
    Asset Accounting - Integration with General Ledger - Post APC values periodically to the General Ledger - Specify Document type for peridical Posting of Asset Values.
    Thanks,
    Raja.

  • Authoriztion for Goods Issue/Goods Reciept documents

    Hi..
    I want to authorize the two users who create goods issue/goods reciepts. Each of them should acces only his goods issue/goods reciepts documents
    I haver not found Goods issue/Goods reciept document on "Data Ownership Exceptions" window and checked  "enabler ownership filteration"  as well.
    please let me know how to achieve this..
    Regards
    Akriti

    Data Ownership would only apply to marketing documents.  However, Goods Issue/Goods Receipt documents are not parts of marketing documents.  Therefore, this function is not yet available.  You may use SDK, SP or add-on to achieve your goal.  Or post a DRQ here:
    /community [original link is broken]
    Thanks,
    Gordon

  • Auto print of Goods Issue/Transfer Posting Documents by Movement type

    Hi,
    We have created two different output types to print the layout's of Goods Issue/Transfer Posting Documents.
    The requirement is to default the message in the document by movement type (key combination)
    Meaning if it is 201 it should populate GI output type
    If it is 313 it should populate TP output type.
    we do not have any standard key combination  (NACR) by movement type wise.
    Any alternative way of meeting this requirement?
    Thanks
    Regards
    Ram

    Hello Kevin,
    I donu2019t think it is necessary to use a user exit to keep the Material B (that is transferred from Material A) in the same bin.
    This can be controlled in the customizing: indicator Post to same bin, that can be set in the WM Movement type (V_T333-KZUAP) and in the Storage type (V_T3010-KZUAP).
    Now I donu2019t know your business process but I am surprised that Material B requires more space than Material A since it is u2018bornu2019 by means of a transfer posting and not a production or packing step that makes it bigger in terms of capacity required.
    A workaround for this could be to transfer (LT10) Material A first to a separate Storage type (with the Post to same bin-flag set) that has no Capacity check and after the 309 posting transfer it back into the warehouse with LT10.
    Success and thanks beforehand for any credits!
    Kind regards,
    Bart

  • Issue in Delivery document Status update

    Hi ,
    We are facing serious issue in delivery document delta extraction via Delivery item Datasource (2LIS_12_VCITM). This leads to incorrect Pending logistic figures in stock and dispatch report. Details for the issue are as follows.
    Datasource used : 2LIS_12_VCITM
    Issue Description :
    The goods movement status flag (WBSTA) field from the ECC table VBUP is not correctly extracted by the standard deliveries item datasource (2LIS_12_VCITM) during delta loads.
    Steps taken to rectify the issue
    -     We have removed the commit work statement and applied in parallel update task in ECC. Include : ZSD_INCL_DEL_SAVE_FINS
    -     Setup tables for Delivery were filled in ECC.
    -     Historic data was deleted from the Delivery cube in  BW
    -     Data was pulled into PSA (Info package u2013 Full Update)  from where it was loaded to DSO in overwrite mode  (Historic data was not deleted from DSO)
    -     Data from DSO to delivery cube was loaded with DTP setting as Full Update.
    -     After complete data was updated in Cube the DTP setting were changed to Delta.
    -     Delta info package was scheduled  for the capturing the document changes from next load.
    -     Goods Movement status for all the documents created till this point was exactly similar to the status in ECC.
    -     The goods movement status flag (WBSTA) field from the ECC table VBUP is not correctly extracted by the standard deliveries item datasource (2LIS_12_VCITM) during delta loads.
    Example              :
                                    Delivery document no:  2131260470 is pulled with goods movement status u201CAu201D in firstly load (here BW Delivery status matches
                                        With ECC )
                                   Before next delta load status in ECC (WBSTA) changes to u201CCu201D (PGI Complete) along with updated u201CGoods Issue Dateu201D
                                   Extractor fails to capture the change in document ,thus status in BW remains as u201CAu201D with no date updated in u201CGoods Issue Dateu201D
                                       field.
    Steps for Reconstruction :
    1)     Check the value of Goods movement status and actual goods issue date fields in the PSA for the datasource 
    2LIS_12_VCITM in BW for the sample delivery mentioned in the attached file
    2)     Compare these values with the ones in the ECC table VBUP.
    Kindly help at the earliest.
    Regards,

    Hi,
       Could anyone please reply as its quite critical.
    many thanks in advance,
    regards
    pramod.

  • Issue With Sales Document Type in BW.

    Dear Experts,
    I am facing an Issue with Sales Document Type(Object name is 0DOC_TYPE).
    when i am loading data from R/3 to BW It is converting Sales Document type as follow
    Sales Document Type in R/3                         Sales Document Type in BW
    OR                                                                        TA
    CR                                                                        G2
    DR                                                                        L2
    I check with an ABAPer and he told that there is conversion exit for this Object so that's why it is converting when sending to BW. But the user wants to see in Report same as it is in R/3 like OR, CR DR ... etc.
    I have done some investigation and found that the conversion exit (CONVERSION_EXIT_AUART_INPUT and CONVERSION_EXIT_AUART_OUTPUT) are converting the values based in the table TAUUM
    The staructure of TAUUM is
    MANDT(Client)  SPRAS(Language) AUART(Sales document type (not converted)   AUART_SPR(Language key for sales document type)
    and values are
    100 E TA OR
    100 E G2 CR
    etc....
    The same Conversion exits(CONVERSION_EXIT_AUART_INPUT and CONVERSION_EXIT_AUART_OUTPUT) and table TAUUM are available in BW as well. So i thought I can Use InfoObject 0DOC_TYPE by changing it's conversion Routine as AUART(which runs based on the above mentioned conversion exits).
    but the the problem is table TAUUM(Pool Table) does't have any data in BW.
    So can anyone tell me is there any option to load data into table TAUUM from R/3 or any other option to solve this issue.
    Your ideas will really help's me.
    Thanks in advance,
    Dara.

    Hi Venkat,
    Thanks a lot for your immediate response.
    The InfoObject 0DOC_TYPE was without conversion exit by default. but when data coming from R/3 it is converting and sending to BW So that's why i am planning to use conversion exit "AUART" in the info Object.
    I checked data in R/3 using RSA3 it is showing sales document type as "OR" and for the same transaction data when i checked in PSA it is showing as "TA".
    Could you please let me know if there any other options.
    Thanks in advance,
    Dara.

  • Only Return the latest issue of a document

    Hi all,
    I am trying to work out a script to only return the latest issue of a document. In the example below if I was using the correct statement I would only return the issue 3 records (AAA and AAB)
    I am not sure what syntax/operator to use, can anyone help me..
    Document Issue
    AAA 1
    AAA 2
    AAA 3
    AAB 1
    AAB 2
    AAB 3
    I have tried the group by expression and the MAX operator...... to no avail....

    Is this what you need?
    SQL> CREATE TABLE dt_test_docs (        doc_id varchar2(10),
      2                                                     ver number,
      3                                                     updated_by varchar2(10),
      4                                                     updated_timestamp timestamp
      5                                             )
      6  /
    Table created.
    SQL> INSERT INTO dt_test_docs
      2  VALUES('ABC',1,'user1',systimestamp-3)
      3  /
    1 row created.
    SQL> INSERT INTO dt_test_docs
      2  VALUES('ABC',2,'user2',systimestamp-2)
      3  /
    1 row created.
    SQL> INSERT INTO dt_test_docs
      2  VALUES('ABC',3,'user2',systimestamp-1)
      3  /
    1 row created.
    SQL> INSERT INTO dt_test_docs
      2  VALUES('ABC',4,'user3',systimestamp)
      3  /
    1 row created.
    SQL> INSERT INTO dt_test_docs
      2  VALUES('DEF',1,'user3',systimestamp-3)
      3  /
    1 row created.
    SQL> INSERT INTO dt_test_docs
      2  VALUES('DEF',2,'user3',systimestamp-2)
      3  /
    1 row created.
    SQL> INSERT INTO dt_test_docs
      2  VALUES('DEF',3,'user2',systimestamp-1)
      3  /
    1 row created.
    SQL> INSERT INTO dt_test_docs
      2  VALUES('DEF',4,'user1',systimestamp)
      3  /
    1 row created.
    SQL>
    SQL> SELECT
      2     doc_id,
      3     ver,
      4     updated_by,
      5     updated_timestamp,
      6     max_ver
      7  FROM
      8     (
      9     SELECT
    10             doc_id,
    11             ver,
    12             updated_by,
    13             updated_timestamp,
    14             MAX(ver) OVER(PARTITION BY doc_id) max_ver
    15     FROM
    16             dt_test_docs
    17     )
    18  WHERE
    19     max_ver = ver
    20  /
    DOC_ID            VER UPDATED_BY UPDATED_TIMESTAMP                                                      MAX_VER
    ABC                 4 user3      06-SEP-06 05.31.19.242000 PM                                                 4
    DEF                 4 user1      06-SEP-06 05.31.19.304000 PM                                                 4

  • Project Server 2013: Empty issues, questions and documents list in the PWA task details pane

    Project Server 2012, SharePoint 2013
    I have a task with a few attached issues, risks and documents. And I see links to that in the PWA project plan (as icons).
    But when resource open his PWA task pane attachment lists (issues, risks and documents) are empty.
    Why? How to add documents in that lists?

    Hi,
    I have a solution that might work for you, please follow steps below:
    1) Go to your project schedule, make a small modification to any task on schedule and 'Publish' the project.
    2) While your project is being published and saved, open another window 
    Server Settings -> Manage Queue Jobs
    3) Here you can view the progress of your current Project Publishing update, check if all goes smooth and your project is published successfully without indicating any errors of issues like :
    Reporting transfer WSS links failed ( to view any error look at the last column of table on Manage Queue Job page)
    4) Also in your Project window see if the project is published and not saved as Draft.
    Basically this will give you a fair idea of your project being published or not, if not that there is some problem with your Lists ( Risks, Issues and Documents).
    Regards

  • Firefox ShadowDoc out of sync, how do I issue a "cache document" command?

    frequently getting error message that ShadowDoc is out of sync because typing or pasting of text has been detected. Issue a "cache document: command to sync Dragon Dictate with your document

    The only information I could find on this error is over 3 years old.
    However the cache has permissions on each website. If you click on page info for a site that may be asking for cache access, you can check the permissions to store offline cache info.
    Please also ask for help from the software's support, they may know what's going on.

Maybe you are looking for