NI 9411 for RPM measurement

I have a Keyence sensor/amplifier system (LV-NH32/LV-N11N) that looks at a rotating disk. I am trying to acquire the RPM of the disk as it spins down. I have National Instruments module NI9411in NI DAQ 9174. I need to make my own LabVIEW VI for my sensor/amplifier system to interact with 9411. I would like someone to tell me how to go about it. I am trying to look into example finder but I am not very sure which examples to look at. My disk starts to spin down at 10,000 rpm.

Hi Tat-LSU,
Here are two piece of example code from the ni web site that have been used for rpm measurement. They could serve as a model for your code.
https://decibel.ni.com/content/docs/DOC-8172
https://decibel.ni.com/content/docs/DOC-13039
These examples are a good place to start. Let me know if you need additional resources.
Regards,
Josh Brown
Applications Engineer
National Instruments

Similar Messages

How to use cfp ctr 502 for rpm measure+cfp configure in labview

i'm new in handling cFP's,i need to measure rpm of an engine using cFP CTR 502.Plz i need detail regarding which method either pulse counting or frequency method is required for my application,Plz also tell me is there any possibility of configuring cfp using labview

Hi,
please see the following link to NI-Discusion forum. There is simaler question.
http://forums.ni.com/ni/board/message?board.id=110&message.id=1764&requireLogin=False
I also send you tow links to LabVIEW examples. I hope it helps.
http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_answer=&p_guid=BCB1261CBE2635D2E034080020E74861&p_node=174404&p_rank=&p_source=Internal&p_submitted=N
http://venus.ni.com/stage/we/niepd_web_display.display_epd4?p_guid=BCB1261CBE2635D2E034080020E74861&p_node=
TN

Looping through an array to get the index for each measure in a combo box

Hi folks,
I am working on a web application that has two combo boxes, one for year (called yearcombo) and for measures (called myURL) for that selected year, and also two radiobuttons (in radioBtnGroup). I have two years and a bunch of measure for each year. I have a map tool tip that when you mouse over the county you see a measure for that specific year. However I have a bunch of measures for each year and I want to be able to loop through the measures (which are in an array collection inside a combobox) so my "if" expression can find every selectedIndex and bring me the tool tip for that selected measure for that selected radio button. Right now I would have to create if statements for each measure (each selectedIndex inside the myURL combobox)and each radiobutton (inside the radioBtnGroup) instead of creating a if expression to get a map tip tool for each measure. I know I would have to create a loop to search for these indexes and enter that in the if expression and also change the graphic.attributes to reflect the right measure or index selected. Do you API for Flex wizards can give me any tips on how to code this according to my code below ? Any help is greatly appreciated! (the print scree is attached)
Below is the code snippet:
if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 0 && radioBtnGroup.selectedValue == 0)
fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
var graphic:Graphic = Graphic(event.currentTarget);
graphic.symbol = mouseOverSymbol;
var htmlText:String = graphic.attributes.htmlText;
var textArea:TextArea = new TextArea();
try{
textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForDirIndOut.toString()
myMap.infoWindow.content=textArea
myMap.infoWindow.label = graphic.attributes.NAME;
myMap.infoWindow.closeButtonVisible = false;
myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
catch(error:Error) {
trace("Caught Error: "+error);
And below is the combo boxes with the arrays
<mx:FormItem label="Year :" >
<mx:ComboBox id="yearcombo" selectedIndex="0" labelField="label" width="100%" change="changeEvt(event)" >
<mx:ArrayCollection id="year" >
<fx:Object label="2007" year="2007" />
<fx:Object label="2009" year="2009" />
</mx:ArrayCollection>
</mx:ComboBox>
</mx:FormItem>
<mx:FormItem label="Measure:">
<mx:ComboBox id="myURL" selectedIndex="8" width="80%" mouseOver="clickEv2(event)" close="closeHandler(event)">
<mx:ArrayCollection id="measures" >
<fx:Object id="forindout07" labeltext="2007 Forestry Industry Output" label="Forestry Industry Output " value="RADIO_BUTTONS/TFEI_07_forest_industry_output" year="2007" />
<fx:Object id="foremp07" label="2007 Forestry Employment " value="RADIO_BUTTONS/TFEI_07_forest_employment" year="2007" />
<fx:Object id="forlabinc07" label="2007 Forestry Labor Income " value="RADIO_BUTTONS/TFEI_07_forest_labincome" year="2007" />
<fx:Object id="forindbustax07" label="2007 Forestry Indirect Business Tax" value="RADIO_BUTTONS/TFEI_07_forest_business_tax" year="2007" />
<fx:Object id="forindout09" label="Forestry Industry Output " value="RADIO_BUTTONS/TFEI_09_forest_industry_output" year="2009" />
<fx:Object id="foremp09" label="2009 Forestry Employment " value="RADIO_BUTTONS/TFEI_09_forest_employment" year="2009" />
<fx:Object id="forlabinc09" label="2009 Forestry Labor Income " value="RADIO_BUTTONS/TFEI_09_forest_labincome" year="2009" />
<fx:Object id="forindbustax09" label="2009 Forestry Indirect Business Tax" value="RADIO_BUTTONS/TFEI_09_forest_business_tax" year="2009" />
<fx:Object id="blank" label=" " />
</mx:ArrayCollection>

And here is the entire code
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
 xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx"
 xmlns:esri="http://www.esri.com/2008/ags"
 paddingBottom="8" paddingLeft="8"
 paddingRight="8" paddingTop="8"
 backgroundColor="0xffffff"
 layout="vertical" >
 
<fx:Declarations>
 <esri:SimpleFillSymbol id="mouseOverSymbol" alpha="0.5" color="0x808080">
 <esri:SimpleLineSymbol width="0" color="#000000"/>
 </esri:SimpleFillSymbol>
 <esri:SimpleFillSymbol id="defaultsym" alpha="0.01" color="#E0E0E0" >
 <esri:SimpleLineSymbol width="1" color="#000000"/>
 </esri:SimpleFillSymbol>
 
</fx:Declarations>
 <fx:Script>
 <![CDATA[
 import com.esri.ags.Graphic;
 import com.esri.ags.SpatialReference;
 import com.esri.ags.esri_internal;
 import com.esri.ags.events.GraphicEvent;
 import com.esri.ags.geometry.Extent;
 import com.esri.ags.layers.ArcGISDynamicMapServiceLayer;
 import com.esri.ags.symbols.SimpleFillSymbol;
 import com.esri.ags.symbols.SimpleLineSymbol;
 import flash.utils.flash_proxy;
 import mx.collections.ArrayCollection;
 import mx.controls.Alert;
 import mx.controls.RadioButton;
 import mx.controls.TextArea;
 import mx.events.DropdownEvent;
 import mx.events.ItemClickEvent;
 import mx.rpc.Fault;
 import mx.rpc.events.FaultEvent;
 import flash.display.Sprite;
 import flash.events.ErrorEvent;
 import flash.events.MouseEvent;
 private function closeHandler(evt:DropdownEvent):void {
 myLabel.text = ComboBox(evt.target).selectedItem.labeltext;
 private function loadLayerName():void
 myLegend.layers = null;
 layerPanel.removeAllChildren();
 //loop through each layer and add as a radiobutton
 for(var i:uint = 0; i < (dynamicLayer.layerInfos.length); i++)
 var radioBtn:RadioButton = new RadioButton;
 radioBtn.groupName = "radioBtnGroup";
 radioBtn.value = i;
 radioBtn.label = dynamicLayer.layerInfos[i].name;
 if (dynamicLayer.layerInfos[i].name == "Direct Impact (Million $)")
 radioBtn.label = "Direct Impact";
 else if (dynamicLayer.layerInfos[i].name == "Total Impact (Million $)")
 {radioBtn.label = "Total Impact";
 else if (dynamicLayer.layerInfos[i].name == "Total Impact (Jobs)")
 {radioBtn.label = "Total Impact";
 else if (dynamicLayer.layerInfos[i].name == "Direct Impact (Jobs)")
 {radioBtn.label = "Direct Impact";
 else
 {radioBtn.visible= false;
 layerPanel.addChild(radioBtn);
 /* myDividerBox.getDividerAt(0).visible = false; */
 //set the visible layer the first radio button
 radioBtnGroup.selectedValue = 0;
 dynamicLayer.visibleLayers = new ArrayCollection([0]);
 myLegend.layers = [dynamicLayer];
 myLegend.visible = true;
 private function radioClickHandler(event:ItemClickEvent):void
 myLegend.layers = null;
 // update the visible layers to only show the layer selected
 dynamicLayer.visibleLayers = new ArrayCollection([event.index]);
 myLegend.layers = [dynamicLayer];
 private function changeEvt(event:Event):void {
 if (yearcombo.selectedItem.year == "2007")
 measures.filterFunction=filter1
 measures.refresh()
 myURL.dataProvider=measures
 else if (yearcombo.selectedItem.year == "2009")
 measures.filterFunction=filter2
 measures.refresh();
 public function filter1(item:Object):Boolean
 if (item.year=="2007") return true
 else return false
 public function filter2(item:Object):Boolean
 if (item.year=="2009") return true
 else return false
 private function clickEvt(event:Event):void {
 if (yearcombo.selectedItem.year == "2007")
 measures.filterFunction=filter3
 measures.refresh()
 myURL.dataProvider=measures
 else if (yearcombo.selectedItem.year == "2009")
 measures.filterFunction=filter4
 measures.refresh();
 public function filter3(item:Object):Boolean
 if (item.year=="2007") return true
 else return false
 public function filter4(item:Object):Boolean
 if (item.year=="2009") return true
 else return false
 private function clickEv2(event:Event):void {
 if (yearcombo.selectedItem.year == "2007")
 measures.filterFunction=filter5
 measures.refresh()
 else if (yearcombo.selectedItem.year == "2009")
 measures.filterFunction=filter6
 measures.refresh();
 else if (yearcombo.selectedItem.year == 2007 && myURL.selectedIndex==8)
 myLegend.layers = null;
 layerPanel.removeAllChildren();
 public function filter5(item:Object):Boolean
 if (item.year=="2007") return true
 else return false
 public function filter6(item:Object):Boolean
 if (item.year=="2009") return true
 else return false
 /* IF YOU WANT TO INCLUDE OTHER VALUES IN THE MAP TOOLTIP LIKE COUNTY NAME AND THE LABEL OF THE SELECTED ITEM
 if (myURL.selectedIndex==0)
 myTextArea.htmlText = "County: " + gr.attributes.NAME + "\n"
 + "Measure: " + myURL.selectedItem.label + gr.attributes.ForDirIndOut.toString()
 public function fLayer_graphicAddHandler(event:GraphicEvent):void
 event.graphic.addEventListener(MouseEvent.MOUSE_OVER, onMouseOverHandler);
 event.graphic.addEventListener(MouseEvent.MOUSE_OUT, onMouseOutHandler);
 public function onMouseOverHandler(event:MouseEvent):void
 if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 0 && radioBtnGroup.selectedValue == 0)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForDirIndOut.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 0 && radioBtnGroup.selectedValue == 1)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForTotImpIndOut.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 1 && radioBtnGroup.selectedValue == 0)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForDirEmp.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 1 && radioBtnGroup.selectedValue == 1)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForTotImpEmp.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 2 && radioBtnGroup.selectedValue == 0)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForDirLabInc.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 2 && radioBtnGroup.selectedValue == 1)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForTotImpLabInc.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 3 )
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForIndirBusTax.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2009" && myURL.selectedIndex == 0 && radioBtnGroup.selectedValue == 0)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2009'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForDirIndOut.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2009" && myURL.selectedIndex == 0 && radioBtnGroup.selectedValue == 1)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2009'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForTotImpIndOut.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2009" && myURL.selectedIndex == 1 && radioBtnGroup.selectedValue == 0)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2009'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForDirEmp.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2009" && myURL.selectedIndex == 1 && radioBtnGroup.selectedValue == 1)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2009'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForTotImpEmp.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2009" && myURL.selectedIndex == 2 && radioBtnGroup.selectedValue == 0)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2009'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForDirLabInc.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2009" && myURL.selectedIndex == 2 && radioBtnGroup.selectedValue == 1)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2009'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForTotImpLabInc.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2009" && myURL.selectedIndex == 3 )
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2009'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForIndirBusTax.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 public function onMouseOutHandler(event:MouseEvent):void
 var gr:Graphic = Graphic(event.target);
 gr.symbol = defaultsym;
 myMap.infoWindow.hide();
 ]]>
 </fx:Script>
 <fx:Style>
 @namespace esri "http://www.esri.com/2008/ags";
 @namespace s "library://ns.adobe.com/flex/spark";
 @namespace mx "library://ns.adobe.com/flex/mx";
 @namespace esri "http://www.esri.com/2008/ags";
 @namespace components "com.esri.ags.components.*";
 components|InfoWindow
 content-background-alpha : 0.4;
 background-color : #4A7138;
 background-alpha : 0.7;
 border-style : solid;
 </fx:Style>
 <mx:HBox width="930" height="800" id="mapHbox" horizontalAlign="center" >
 <mx:HBox width="80">
 </mx:HBox>
 <mx:HBox id="myHBox" width="800" height="600" backgroundColor="0xffffff" >
 <mx:VBox height="590" width="358" >
 
 <mx:Canvas height="100%" width="100%" backgroundColor="0xffffff" >
 <esri:Map id="myMap" openHandCursorVisible="false"
 height="100%"
 logoVisible="false"
 doubleClickZoomEnabled="false"
 scrollWheelZoomEnabled="false"
 zoomSliderVisible="false"
 scaleBarVisible="false" scale="4000000" >
 <esri:extent>
 <esri:Extent xmin="-10736651.061900" ymin="4024099.909700" xmax="-10409195.669800" ymax="3440153.831100" >
 <esri:SpatialReference wkid="102100"/>
 </esri:Extent>
 </esri:extent>
 <esri:ArcGISDynamicMapServiceLayer id="dynamicLayer2"
 url="http://tfs-24279/ArcGIS/rest/services/RADIO_BUTTONS/counties_layer/MapServer" />
 <esri:ArcGISDynamicMapServiceLayer id="dynamicLayer" name=" "
 alpha="1"
 load="loadLayerName()"
 url="http://tfs-24279/ArcGIS/rest/services/{myURL.selectedItem.value}/MapServer" />
 <esri:FeatureLayer id="fLayer"
 graphicAdd="fLayer_graphicAddHandler(event)"
 mode="snapshot"
 outFields="*"
 symbol="{defaultsym}"
 url= "http://tfs-24279/ArcGIS/rest/services/RADIO_BUTTONS/feature_layer_0709_five/FeatureServer/ 0" />
 </esri:Map>
 </mx:Canvas>
 
 </mx:VBox>
 <mx:VBox height="590" width="20" >
 </mx:VBox>
 <mx:Canvas height="500" width="400" backgroundColor="0xffffff"
 horizontalScrollPolicy="off"
 verticalScrollPolicy="off" >
 <mx:VBox width="420" height="50%" paddingLeft="5" paddingTop="10" paddingRight="10" paddingBottom="10"
 verticalGap="8">
 <mx:Form >
 <mx:FormItem label="Year :" >
 <mx:ComboBox id="yearcombo" selectedIndex="0" labelField="label" width="100%" change="changeEvt(event)" >
 <mx:ArrayCollection id="year" >
 <fx:Object label="2007" year="2007" />
 <fx:Object label="2009" year="2009" />
 </mx:ArrayCollection>
 </mx:ComboBox>
 </mx:FormItem>
 <mx:FormItem label="Measure:">
 <mx:ComboBox id="myURL" selectedIndex="8" width="80%" mouseOver="clickEv2(event)" close="closeHandler(event)">
 <mx:ArrayCollection id="measures" >
 <fx:Object id="forindout07" labeltext="Forestry Industry Output" label="Forestry Industry Output " value="RADIO_BUTTONS/TFEI_07_forest_industry_output" year="2007" />
 <fx:Object id="foremp07" label="Forestry Employment " value="RADIO_BUTTONS/TFEI_07_forest_employment" year="2007" />
 <fx:Object id="forlabinc07" label="Forestry Labor Income " value="RADIO_BUTTONS/TFEI_07_forest_labincome" year="2007" />
 <fx:Object id="forindbustax07" label="Forestry Indirect Business Tax" value="RADIO_BUTTONS/TFEI_07_forest_business_tax" year="2007" />
 <fx:Object id="forindout09" label="Forestry Industry Output " value="RADIO_BUTTONS/TFEI_09_forest_industry_output" year="2009" />
 <fx:Object id="foremp09" label="Forestry Employment " value="RADIO_BUTTONS/TFEI_09_forest_employment" year="2009" />
 <fx:Object id="forlabinc09" label="Forestry Labor Income " value="RADIO_BUTTONS/TFEI_09_forest_labincome" year="2009" />
 <fx:Object id="forindbustax09" label="Forestry Indirect Business Tax" value="RADIO_BUTTONS/TFEI_09_forest_business_tax" year="2009" />
 <fx:Object id="blank" label=" " />
 </mx:ArrayCollection>
 </mx:ComboBox>
 </mx:FormItem>
 </mx:Form>
 <mx:VBox id="layerPanel" width="50%" height="8%" verticalGap="3" paddingLeft="17">
 <mx:RadioButtonGroup id="radioBtnGroup" itemClick="radioClickHandler(event)" />
 </mx:VBox>
 <mx:VBox paddingLeft="17" height="50%" >
 <mx:Canvas id="legendPanel" width="100%" >
 <mx:Label id="myLabel" text=" " fontWeight="bold" />
 <esri:Legend id="myLegend"
 layers="{[dynamicLayer]}"
 map="{myMap}" visible="false"
 respectCurrentMapScale="false"/>
 </mx:Canvas>
 <mx:TextArea width="275" borderAlpha="0" height="200" >
 <mx:htmlText >
 <![CDATA[Note: Counties in white indicate either no data is available for that measure or the data has been supressed due to confidentiality.
 ]]>
 </mx:htmlText>
 </mx:TextArea>
 </mx:VBox>
 </mx:VBox>
 </mx:Canvas>
 </mx:HBox>
 </mx:HBox>
</mx:Application>

Constructing Calculated Measures in MDX for different measures using same columns in a fact table

Hello,
i have a fact table with 2 columns corresponding to dimensions Dim1, Dim2. In the same table i have 4 other columns Value_Type(int), INT_VALUE(int), FLOAT_VALUE(float), TEXT_VALUE(string). There are a number of measures which are identified by Value_Type and
depending on their nature could be written in one of the 3 columns (INT_VALUE(int), FLOAT_VALUE(float), TEXT_VALUE(string)) Let's say Measure1 with Measure_Type=1 is age, 2 is account balance and 3 is Name for clarity. There could be other measure types that
use these 3 same columns for data. So the sample fact table looks like this
Dim1 Dim2 Measure_Type INT_VALUE FLOAT_VALUE TEXT_VALUE
10 10 1 25
10 10 2 2000,34
10 10 3 John
10 20 1 28
10 20 2 3490,23
10 20 3 Frank
My task is to write an MDX query for each Dim1, Dim2 combination which returns all 3 measures in the same row. The idea is to construct a calculated member for each Measure that returns value from the right field. For example for Measure1 we take INT_VALUE
with measure_type=1. The problem is i don't know how to construct MDX query for these calculated members. Can you please help me?
So my final goal is to write an MDX query that returns all measures in one row for each set of Dim1, Dim2
SELECT [Measure1], [Measure2], [Measure3] ON COLUMNS,
NON EMPTY [Dim1].[Dim1].[Dim1].Members*[Dim2].[Dim2].[Dim2].Members ON ROWS
FROM [Cube]
Dim1 Dim2 Measure1 Measure2 Measure3
10 10 25 2000,34 John
10 20 28 3490,23 Frank

Hi Kosmipt,
I would combine the "INT_VALUE", "FLOAT_VALUE" and "TEXT_VALUE" columns into one with STRING data type for the fact table. And there should be one dimension to store the Measure_Type informations. Then in cube, you can write MDX scope for every one of
"Measure_Type" dimension members. For example,
scope(
            [Measures].[M]
    [DimMType].[MType].&[1]= CINT([Measures].[M]);
end scope;
Once the cube is built by the above way, you can write MDX like something like the following to achieve your purpose.
WITH member [Measures].[Measure1] AS ([DimMType].[MType].&[1],[Measures].[M])
         member [Measures].[Measure2] AS ([DimMType].[MType].&[2],[Measures].[M])
         member [Measures].[Measure3] AS ([DimMType].[MType].&[3],[Measures].[M])
thanks,
Jerry

Is there program for precise measuring of web traffic in/out my Mac?

Some ISPs have their proprietary web traffic/usage indicators but they are crude, of no use for precise measurements.
Widgets are of no hellp either.
Is there a program which can display the internet traffic in/out of a computer at any given moment and display it instantly ?
Ideally , able to display live (or by manual update) what the traffic is to/from websites visited , email in/out data flow and creating a log, so I can have a record what exactly the web usage is, for example, for last 1 hour/ 1day/1 week.
Is there such a program?
Thanks in advance

I've been using SurplusMeter waiting for AT&T U-verse to get their usage meter going (3 months of waiting) due to the caps they (supposedly) imposed on May 2, 2011. They still haven't gotten their meter working and it's not clear the caps are being imposed (250 GB/month). But I wanted to get a idea of how much I was using so I decided on SurplusMeter.
SurplusMeter has a number of nice features. But without any other measurement tool to cooralate it with I have no idea how accurate it is. One thing I do know howerver is that in the case of U-verse, where all traffic goes through a U-verse provided router (they call it the "resident gateway") I can only measue the traffic in and out of my computer, not in and out of the router (no, there no separate info in the router to give me this info or I wouldn't have needed SurplusMeter).
FWIW, there are other utilities that can give you some of this info or present it in different ways. Here's a few others I looked at before choosing SurplusMeter:
Net Monitor
ProteMac Meter
TraffiX
UsageTracker

Asset under Construction for Investment Measures

Hi all
This is my client requirement
how to do asset under Construction for Investment Measures
configration
pls send configration

Hi
These are the steps to be followed:
1. Create a asset class for CWIP (Auc) - OAOA: In this select Investment Measure under Status of AuC.
2. Define Investment Profile (OITA) - Give AuC Asset class as invest measure asset class.
3. Create Internal Order Type for Investments: Normally standard 0650 order type will take care of the requirement. We need not to create anything.
4. Create Asset (AS01) under normal asset class i.e., buildings or vehicles etc... (You cannot create under AuC Asset Class)
5. Create Internal Order (KO01): Give Object class as investment and under Investments tab give investment profile created in step 2.
Go to settlement profile tab and give category as FXA and settlement receiver the asset no. and give 100%.
6. Change asset master to incorporate the internal order number under Origin Tab. Give no. in Investment order field.
7. Release the Internal Order (KO02)
8. Post the transactions through different T.Codes by referring Internal Order as account assignment.
9. Go to Internal Order through KO02 and complete TECO under control data.
10. Go to T.Code KO88 (internal order settlement) and settle the order.
Hope this will help you.

HT203433 After reading the sample for Hard Measures and buying and downloading, the downloaded book was missing 9 chapters. Anyone know how to fix this?

After reading the sample for Hard Measures and buying and downloading, the downloaded book was missing 9 chapters. Anyone know how to fix this?

Hi Charles...
Try re downloading the iBook > Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to identify the source column and source table for a measure

Does anyone have a query that I can use to positively identify the source column and source table for a cube measure in an SSAS cube? Visual Studio shows ID, Name, and Source, but it is nearly worthless in a large cube and database.
Also - the same for a dimension would be great.
If no query exists for this, can someone please explain how to find the source column/table for a measure and for a dimension?
Thanks.

DMVs don’t expose the DataSourceView content. AMO is much better suited for object model operations like
this than the DMVs. PowerShell is also sometimes an option, but in this case C# code would be much easier because analyzing the contents of the DataSourceView is much easier using the .Net DataSet class.
Hope this helps.
Reeves
Denver, CO

Different aggregation operators for the measures in a compressed cube

I am using OWB 10gR2 to create a cube and its dimensions (deployed into a 10gR2 database). Since the cube has 11 dimensions I set all dimensions to sparse and the cube to compressed. The cube has 4 measures, two of them have SUM as aggregation operator for the TIME dimensions the other two should have AVERAGE (or FIRST). I have SUM for all other dimensions.
After loading data into the cube for the first time I realized that the aggregation for the TIME dimension was not always (although sometimes) correct. It was really strange because either the aggregated values were correct (for SUM and for AVERAGE) or seemed to be "near" the correct result (like average of 145.279 and 145.281 is 145.282 instead of 145.280 or 122+44+16=180 instead of 182). For all other dimensions the aggregation was OK.
Now I have the following questions:
1. Is it possible to have different aggregations for different measures in the same COMPRESSED cube?
2. Is it possible to have the AVERAGE or FIRST aggregation operator for measures in a COMPRESSED cube?
For a 10gR1 database the answer would be NO, but for a 10gR2 database I do not know. I could not find the answer, neither in the Oracle documentation nor somewhere else.

What I found in Oracle presentation is that in 10GR2 compressed cube enhancements support all aggregation methods except weighted methods (first, last, minimum, maximum and so on). It is from September 2005 so maybe something changed since then.
Regarding your question about the results I think it is caused by the fact that calculation are made on doubles and then there is a compression, so maybe precsion is lost a little bit :(. I really am curious whether it is because of numeric (precision loss) issues.

Different aggregation operator for two measures in single cube

Hi,
I have three measures age_month and age_year,pages for which aggregation operator should be like this
for age_month and age_year
time - max
account - sum
sales org - sum
for pages
time - sum
account - sum
sales org - sum
I am creating MOLAP cube in OWB and deploying to AWM. I can create above structure in OWB but when I deploy it to AWM I see that for all the dimensions and all the measures aggregation operator as sum. Off course I can change the aggregation operator at cube level but it make changes to all underlying measures too.
Also I can see in XML of the cube and see the operator for two measures is as max but UI shows as sum. After load also I am seeing in report it is calculating as sum instead of max along time dimension.
Any help would be highly appreciated.
Thanks
Brijesh

If you have an existing cube (already defined and aggregation setup) then modifying the aggregation behavior like changing order of dimensions/aggregation operators is not very robust (likely to fail due to inability of internal objects to sync up to modified defintion). Its always better to take a backup of cube definition and drop/rebuild a fresh cube with new dim order/agg operators.
How can you have a compressed cube and also set the aggregation property per dimension?
I was under the impression that if it is a compressed cube, then not only is there a restriction that all measures have same aggregation properties (defined at cube level) but also the aggregation behavior defined at cube level should use the same operator (note: any one operator out of sum or max or min) for all dimensions.
Edited by: Shankar S. on Dec 19, 2008 11:54 AM
Perhaps this additional restriction is only required if we intend to use the Cube as a source for relational queries using Cube organized MVs.
Another way to do this is given below:
I'm assuming that when you say that you require Max along Time and Sum along other dimensions, you mean that you want LAST (chronological) along time at leaf level and SUM along other dimension. Also assuming that Time hierarchy has the following levels: DAY, MONTH, QUARTER, YEAR. Big assumption :) as finding out Max along time requires the help of the fact/measure whereas finding out last along time requires us to use the dimension (along with dimension metadata) alone.
Define 1 Cube: Cube1 ... Structure: Compressed Composite, datatype: DECIMAL
Set Aggregation: SUM along all dimensions
Create 3 stored measures ( age_m_sto, age_y_sto and pages)
You may want to set description for age_m_sto/age_y_sto as "******** INTERNAL: DO NOT USE ******** Stored Measure used for age_month/age_year"
Create 2 calculated measures - age_month and age_year defined as follows ...
olap expresssion to be given in AWM:
<age_month>: OLAP_DML_EXPRESSION('cube1_age_m_sto(time if time_levelrel eq ''DAY'' then time else statlast(limit(time to bottomdescendants using time_parentrel time(time time))))', DECIMAL)
<age_year>: OLAP_DML_EXPRESSION('cube1_age_y_sto(time if time_levelrel eq ''DAY'' then time else statlast(limit(time to bottomdescendants using time_parentrel time(time time))))', DECIMAL)
NOTE: The caculated measure performs the LAST along time action using the stored measure. For every higher level time dimension member, it reaches along the dimension to the last leaf level member and reads the stored measure for that lowest level time member.
Map and Maintain Cube.
From the SQL Cube View: Use only the columns corresponding to stored measure: pages and calculated measures: age_month, age_pages (ignore columns corresponding to age_m_sto, age_y_sto)
HTH
Shankar

Person Responsible filed mandaory for Safety measures

Dear Frndz
How to make Person Responsible filed mandatory in safety measures, while creating a safety measure.
i found one exit
Enhanced field check for incident/accident log in create and change mode
IHS_IALCHK
IAL_CHECK
CBIH_LB14_IAL_UPD_CRE_CHECK
but this is executed at the time of saving incident acciden tlog, and so check can be introduced for safety measures wrt IAL, but as we all know safety meaures are cretaed in 3 ways, 1. IAL 2 WA 3. RA
what is a way out to make person responsible filed mandatory for safety measures in all cases.
thanks and regards.
mandar sathe

Hi Mandar,
Please try it out.
Open the safety Measures screen.
Select System > Status.
SAP Data > Repository Data > Screen number(double click)
Here two screen Numbers are available. you need to select the second screen number (Program subscreen).
You will enter into Screen painter screen.
Click on "Go to Layout" button.
Here you select the field to be mandate. for ex: "Person responsible" in this case.
double click on the field.
One more pop-up screen appears.
In that go to Attributes > Program Tab.
Here Select Input field as "required". Right now it is appearing as "possible".
To do these changes, you should go to change mode. For that you need to have an "Access Key".
I think it will workout. Need not to do any changes in standard program coding.
Thanks & Regards
kamal

Set member to totalize a group of set members for any measure

Hi there,
I am wandering is there is a way to get a set member that totalize a particular group of members. So for example:
For a Location dimension which only have Location attribute with the following members:
Location1
Location2
Location3
Location4
Location5
I would like to create a static set with only one member as MidTotal that will basically return the total for Location4+Location5 for any measure in the Cube.
Any advice or query will be very welcome.
Thanks and best regards,
Joss

Hi Joss,
According to your description, you want to create calculated members to aggregate the member Location4 and Location5, right?
In this case, you try the query below.
create member [Cube].[Dimension].[Hierarchy].[Member]
as
aggregate( {
[Cube].[Dimension].[Hierarchy].&[Location4],
[Cube].[Dimension].[Hierarchy].&[Location5]
I have tested it on my local environment, here is the results.
Reference
http://msdn.microsoft.com/en-us/library/ms166568.aspx
Regards,
Charlie Liao
TechNet Community Support

There are no queries in the log for selected measure group

I configured SSAS 2008 R2 Server to dump every 5th query to olapquerlog table in a new logging database. Data is coming to the log table fine. I have been running it from last two weeks. I have about 175 queries against the cube which i
want to aggregate. When i run the usage based aggregation wizard, ssas never finds any query for all measure group. i see a warning below that, "There are no queries in the log for selected measure group".
Can anyone tell me why?
Aneel Ismaily

ID and Database Name look same when i open code from cube;
<ID>Spend
Analytics DW</ID>
<Name>Spend
Analytics DW</Name>
this is how data looks like in sql table;
MSOLAP_Database
MSOLAP_ObjectPath
MSOLAP_User
StartTime
Duration
1
SpendAnalyticsDW
NT1101112\BICORP.SpendAnalytics.Spend Analytics DW.Account Ledger
ROCKTENN\!sharepoint2010
6/22/2011
718
2
SpendAnalyticsDW
NT1101112\BICORP.SpendAnalytics.Spend Analytics DW.Account Payable 1
ROCKTENN\SDouglas
6/20/2011
359
Note: I have removed actual dataset from the table, because of its length.Aneel Ismaily

#value error for datetime measure in SSAS

HI,
Iam getting #value error for datetime measure in SSAS.

Hi jarugulalaks,
If it is related to the SSAS, you could post this issue to the SSAS forum.
The forum link:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=sqlanalysisservices
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Connection for Red Lion 2 wire PSA 1B sensor to 5B45 for RPM

I am trying to find out if the red lion 2 wire prox. sensor can be connected to a 5B45 module for rpm and what the proper connections are.

Hello,
I am unfamiliar with the Red Lion 2 Wire Proximity(?)Sensor, but you should be able to determine this information according to the 5B user manuals found here. Page 39 shows a circuit diagram as well as specifications for the 5B45 module. Notice that National Instruments does not maintain the latest user manuals for the 5B Series products. For the most updated information, refer to the Analog Devices webpage.
Depending on how that sensor outputs, it appears that you will be connecting between pins 2 and 3. Again, please refer to the 5B manual for information on connecting signals.
Jared A

NI 9411 for RPM measurement

Similar Messages

Maybe you are looking for