NI Backgound Process(es) And Hibernate with Truecrypt
I have observed an issue in both LabVIEW 8.5 and 8.6 on XP where one of the NI backgound processes that always runs when LabVIEW is installed makes the system unable to resume from hibernation. (This has been on two separate systems: SP2 and SP3.) Both systems have Tryecrypt full-disk encryption on the boot partition, although I am unsure whether this is related.
Aside from the hibernation resumption issues both systems and all NI software function normally. Removing LabVIEW restores proper hibernation behavior.
Has anyone seen anything like this?
I can't say I've specifically seen this. But from my experience, hibernation on Windows XP has always been shaky. And I know of some XP laptops that do not have LabVIEW that are always unreliable when it comes to resuming from hibernation. I don't know if things improved in Vista as I am only using a sleep mode with Vista
Similar Messages
-
Processing paths and containers with an "&" in the name
So in the dark ages, someone though it was a good idea to use "&" in a storage path and in a container name.
NSM seems to be choking on this, the path errors out... any suggestions short of moving the storage and changing the ou name?On 2/19/2015 3:06 PM, dbgallo wrote:
>
> NFMS Support Team;2344556 Wrote:
>> On 1/14/2015 1:36 PM, dbgallo wrote:
>>>
>>> So in the dark ages, someone though it was a good idea to use "&" in
>> a
>>> storage path and in a container name.
>>>
>>> NSM seems to be choking on this, the path errors out... any
>> suggestions
>>> short of moving the storage and changing the ou name?
>>>
>>>
>> dbgallo,
>>
>> Which version of NSM are you using? And what error do you get, in which
>> event state and action?
>>
>> -- NFMS Support Team
>
> 4.0, the ou and storage name is "PM&R"
>
> the code is from turning the logging for files up to debug:
> ~~~Begin error~~~~~
> 01 2015-02-19 13:57:25 -18000 3 8007 20045 7f1c9eb93700
> NWUDirHandleAllocate() - Called CCNWAllocTempNSDirHandle2(0x02C80016
> ["SOMESERVER-SERVER"], 0 (3), "PM&R" / [#3 L"PM&R"], 4, ..., 4),
> rc = 0x0000899c (35228), Result = 127.
> 01 2015-02-19 13:57:25 -18000 5 8006 20045 7f1c8ffff700 TM:
> TaskWorkerThread() - Processed Task ID
> "6825D5EE506FD2018E6D44BF0109FE59", final status = 0.
> ~~~~ end error
>
>
dbgallo,
We've tracked down this error, and have an updated NSM Engine build for
you to test with. Could you send us an email at
[email protected] to follow up with this? Thank you.
-- NFMS Support Team -
Windows 10 Sleep and Hibernate with HP Spectre
Hello After upgrading to Windows 10 my HP Spectre x360 the sleep option in the laptop is not working properly, and while in sleep mode, it is still consuming power, and heating up. Also the power options in Windows 10 is not all enabled (the advanced power options), specially that it does not allow password after sleep (which hinders the security of the device)This was not happening with Windows 8.1 .. Is this issue reported with someone else ? Is it a Windows issue, or a driver issue? Thanks
maksharaf wrote:
Hello After upgrading to Windows 10 my HP Spectre x360 the sleep option in the laptop is not working properly, and while in sleep mode, it is still consuming power, and heating up. Also the power options in Windows 10 is not all enabled (the advanced power options), specially that it does not allow password after sleep (which hinders the security of the device)This was not happening with Windows 8.1 .. Is this issue reported with someone else ? Is it a Windows issue, or a driver issue? ThanksNothing you download will fix this problem since HP have not released drivers to work with Windows 10. The MYTH that Windows 7 / 8 / 8.1 drivers would automatically work is rubbish! See here, lots of others have the same problem! http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Windows-10-Laptop-won-t-go-into-sleep-mode/m-p/5182793/highlight/false#M305085 The only fix is to revert back to your old system! -
Integrate Crystal Reports with Spring MVC and Hibernate
Hi all,
having successfully used the JRC version 11.8.4.1094 in a Java environment with:
1)JBoss 4.2.3,
2)Oracle 11,
3)EJB 2,
4)Crystal Reports 2008,
I would like to integrate Crystal Reports into my existing spring MVC and hibernate web app using:
1)CRJ version 12.2.209,
2)JBoss 5.1,
3)Oracle 11,
4)EJB 3,
5)Crystal Reports 2008,
reusing code integration. I used ReportExportControl and I produced the PDF directly.
The error occurs when returning from EJB, into Delegate, and is the following:
09:36:23,046 WARN [InterceptorsFactory] EJBTHREE-1246: Do not use InterceptorsFactory with a ManagedObjectAdvisor, InterceptorRegistry should be used via the bean container
09:36:23,062 WARN [InterceptorsFactory] EJBTHREE-1246: Do not use InterceptorsFactory with a ManagedObjectAdvisor, InterceptorRegistry should be used via the bean container
09:38:03,062 ERROR [[dispatcher]] Servlet.service() for servlet dispatcher threw exception
java.lang.InstantiationException: com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat
at java.lang.Class.newInstance0(Class.java:340)
at java.lang.Class.newInstance(Class.java:308)
at org.jboss.serial.classmetamodel.ClassMetaData.newInstance(ClassMetaData.java:334)
at org.jboss.serial.persister.RegularObjectPersister.readData(RegularObjectPersister.java:239)
at org.jboss.serial.objectmetamodel.ObjectDescriptorFactory.readObjectDescriptionFromStreaming(ObjectDescriptorFactory.java:412)
at org.jboss.serial.objectmetamodel.ObjectDescriptorFactory.objectFromDescription(ObjectDescriptorFactory.java:82)
at org.jboss.serial.objectmetamodel.DataContainer$DataContainerInput.readObject(DataContainer.java:845)
at org.jboss.serial.persister.RegularObjectPersister.readSlotWithFields(RegularObjectPersister.java:353)
at org.jboss.serial.persister.RegularObjectPersister.defaultRead(RegularObjectPersister.java:273)
at org.jboss.serial.persister.RegularObjectPersister.readData(RegularObjectPersister.java:241)
at org.jboss.serial.objectmetamodel.ObjectDescriptorFactory.readObjectDescriptionFromStreaming(ObjectDescriptorFactory.java:412)
at org.jboss.serial.objectmetamodel.ObjectDescriptorFactory.objectFromDescription(ObjectDescriptorFactory.java:82)
at org.jboss.serial.objectmetamodel.DataContainer$DataContainerInput.readObject(DataContainer.java:845)
at org.jboss.serial.persister.RegularObjectPersister.readSlotWithFields(RegularObjectPersister.java:353)
at org.jboss.serial.persister.RegularObjectPersister.defaultRead(RegularObjectPersister.java:273)
at org.jboss.serial.persister.RegularObjectPersister.readData(RegularObjectPersister.java:241)
at org.jboss.serial.objectmetamodel.ObjectDescriptorFactory.readObjectDescriptionFromStreaming(ObjectDescriptorFactory.java:412)
at org.jboss.serial.objectmetamodel.ObjectDescriptorFactory.objectFromDescription(ObjectDescriptorFactory.java:82)
at org.jboss.serial.objectmetamodel.DataContainer$DataContainerInput.readObject(DataContainer.java:845)
at org.jboss.serial.io.MarshalledObjectForLocalCalls.get(MarshalledObjectForLocalCalls.java:60)
at org.jboss.ejb3.remoting.IsLocalInterceptor.invokeLocal(IsLocalInterceptor.java:101)
at org.jboss.ejb3.remoting.IsLocalInterceptor.invoke(IsLocalInterceptor.java:72)
at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102)
at org.jboss.aspects.remoting.PojiProxy.invoke(PojiProxy.java:62)
at $Proxy286.invoke(Unknown Source)
at org.jboss.ejb3.proxy.impl.handler.session.SessionProxyInvocationHandlerBase.invoke(SessionProxyInvocationHandlerBase.java:207)
at org.jboss.ejb3.proxy.impl.handler.session.SessionProxyInvocationHandlerBase.invoke(SessionProxyInvocationHandlerBase.java:164)
at $Proxy284.getXXXX(Unknown Source)
at xx.xxx.xxxxxx.spring.manager.report.ReportManagerImpl.getXXXX(ReportManagerImpl.java:26)
at xxx.xxxx.springprova.WelcomeController.handleRequestInternal(WelcomeController.java:70)
at org.springframework.web.servlet.mvc.AbstractController.handleRequest(AbstractController.java:153)
at org.springframework.web.servlet.mvc.SimpleControllerHandlerAdapter.handle(SimpleControllerHandlerAdapter.java:48)
at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:790)
at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:719)
at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:644)
at org.springframework.web.servlet.FrameworkServlet.doGet(FrameworkServlet.java:549)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:235)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:190)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:92)
at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.process(SecurityContextEstablishmentValve.java:126)
at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invoke(SecurityContextEstablishmentValve.java:70)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:330)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:829)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:598)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:662)
Have an idea, please?
Thank you.You'll need to install the Crystal .NET that comes with VS 2005. You then install Crystal XI R2 over the top and not only will Crystal be integrated with the IDE, it should use the updated assemblies from R2.
-Dell
- A computer only does what you told it to, not what you thought you told it to!</p> -
hello, is there a way to make a word processing document in pages with !" inch margins? i ask this because there is a box where you can write text and the you start your document, but it takes more than 1 inch from the top, can that box be removed? and why whatever you write in the box appears in every page of the paper? is there a way to avoid this? sorry I do not use computers very often and i just want to write an essay for my english clss, thanks for your help.
The box is called Headers and is used for thing that will be repeated on several pages like page numbering and names etc.. You can uncheck it in the Inspector > Document tab
-
I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.Hi, I disabled the antivirus and the firewall. Same result
I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
My iphone 5 is not jailbroken, and is a factory unlocked phone.
Any other suggestion?
Pls help -
There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?
Nah - that's just the normal boot process.
Clinton -
I have an old MacBook Pro, which just upgraded to OS X 10.10.3...in the process iPhoto disappeared, along with all my photos! I'm shocked, and have no idea what to do (I'm the furthest thing from tech). Did the photos go into iCloud? I have a photos icon now in the place of iPhoto, but no photos! Any suggestions or help?
Niel, thank you! Can't get iPhotos, but found my photos after clicking "photos" in the new app, after your suggestion. (option, click). Whew! I panicked, and appreciate your help. I'm going to miss my old iPhoto!
-
How to handle blob data with java and mysql and hibernate
Dear all,
I am using java 1.6 and mysql 5.5 and hibernate 3.0 . Some time i use blob data type . Earlier my project's data base was oracle 10g but now i am converting it to Mysql and now i am facing problem to save and fetch blob data to mysql database . Can anybody give me the source code for blob handling with java+Mysql+Hibernate
now my code is :--
==================================================
*.hbm.xml :--
<property name="image" column="IMAGE" type="com.shrisure.server.usertype.BinaryBlobType" insert="true" update="true" lazy="false"/>
===================================================
*.java :--
package com.shrisure.server.usertype;
import java.io.OutputStream;
import java.io.Serializable;
import java.sql.Blob;
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Types;
import javax.naming.InitialContext;
import javax.sql.DataSource;
import oracle.sql.BLOB;
import org.hibernate.HibernateException;
import org.hibernate.usertype.UserType;
import org.jboss.resource.adapter.jdbc.WrappedConnection;
import com.google.gwt.user.client.rpc.IsSerializable;
public class BinaryBlobType implements UserType, java.io.Serializable, IsSerializable {
private static final long serialVersionUID = 1111222233331231L;
public int[] sqlTypes() {
return new int[] { Types.BLOB };
public Class returnedClass() {
return byte[].class;
public boolean equals(Object x, Object y) {
return (x == y) || (x != null && y != null && java.util.Arrays.equals((byte[]) x, (byte[]) y));
public void nullSafeSet(PreparedStatement st, Object value, int index) throws HibernateException, SQLException {
BLOB tempBlob = null;
WrappedConnection wc = null;
try {
if (value != null) {
Connection oracleConnection = st.getConnection();
if (oracleConnection instanceof oracle.jdbc.driver.OracleConnection) {
tempBlob = BLOB.createTemporary(oracleConnection, true, BLOB.DURATION_SESSION);
if (oracleConnection instanceof org.jboss.resource.adapter.jdbc.WrappedConnection) {
InitialContext ctx = new InitialContext();
DataSource dataSource = (DataSource) ctx.lookup("java:/DefaultDS");
Connection dsConn = dataSource.getConnection();
wc = (WrappedConnection) dsConn;
// with getUnderlying connection method , cast it to Oracle
// Connection
oracleConnection = wc.getUnderlyingConnection();
tempBlob = BLOB.createTemporary(oracleConnection, true, BLOB.DURATION_SESSION);
tempBlob.open(BLOB.MODE_READWRITE);
OutputStream tempBlobWriter = tempBlob.getBinaryOutputStream();// setBinaryStream(1);
tempBlobWriter.write((byte[]) value);
tempBlobWriter.flush();
tempBlobWriter.close();
tempBlob.close();
st.setBlob(index, tempBlob);
} else {
st.setBlob(index, BLOB.empty_lob());
} catch (Exception exp) {
if (tempBlob != null) {
tempBlob.freeTemporary();
exp.printStackTrace();
st.setBlob(index, BLOB.empty_lob());
// throw new RuntimeException();
} finally {
if (wc != null) {
wc.close();
public Object nullSafeGet(ResultSet rs, String[] names, Object owner) throws HibernateException, SQLException {
final Blob blob = rs.getBlob(names[0]);
return blob != null ? blob.getBytes(1, (int) blob.length()) : null;
public Object deepCopy(Object value) {
if (value == null)
return null;
byte[] bytes = (byte[]) value;
byte[] result = new byte[bytes.length];
System.arraycopy(bytes, 0, result, 0, bytes.length);
return result;
public boolean isMutable() {
return true;
public Object assemble(Serializable arg0, Object arg1) throws HibernateException {
return assemble(arg0, arg1);
public Serializable disassemble(Object arg0) throws HibernateException {
return disassemble(arg0);
public int hashCode(Object arg0) throws HibernateException {
return hashCode();
public Object replace(Object arg0, Object arg1, Object arg2) throws HibernateException {
return replace(arg0, arg1, arg2);
=================================================================
can anyone give me the source code for this BinaryBlobType.java according to mysql blob handling ..Moderator action: crosspost deleted.
-
Rewrite process and remove the call to f-54 and replace with bapi proces
Hi Gurus,
Please help me to find the soultion.
The root cause of this continual problem is the design and use of BDC session for F-54. Is there a redesign possible with ECC6.0?
I wanted to rewrite the process and remove the call to f-54 and replace with bapi process.
if this is now possible in ECC 6.0
The benefit would be to better control what PO was used in the DP recoupment.
Thanking you,
Raju Singhireddy.Hi Balaji,
Check this BAPI
BAPI_QUOTATION_CREATEFROMDATA
BAPI_QUOTATION_CREATEFROMDATA2
BAPI_CUSTOMERQUOTATION_CHANGE
Regards
Arun -
but every time i try to its fine until it processes it and then it says it has a problem with my connection but my firewall is off?? Please help.
I'm having the same problem trying to update my iphone 4(Just got a replacement), I also have firewall off...Hopefully someone can help. Mine says error -3259
-
Must I use spring Framework with JSF2 and Hibernate?
Hi all,
I'm starting to develop a web portal and I would use JSF2 and Hibernate.
Now I don't know JSF2 so I searched some tutorial.
I found a tutorial on JSF2 that seems very complete but in this tutorial I found a section where the author use Hibernate for the "model section", JSF2 for the "view section" and Spring for the "controller section"!
Now I have a doubt, can I develop a web portal without Spring MVC or I can't develop any controller's component with JSF2?
Thank you for your replies!For Ram, do you mean that JSF2 isn't a MVC framework with your reply?
For Kayaman, the author did some examples how implements some frameworks with JSF2 and he do 3 examples:
1) JSF2 and JDBC;
2) JSF2 and Spring;
3) JSF2, Spring and Hibernate!
However, after this thread, I found a forum in linked to the tutorial and I asked why they use JSF2 and Spring together! Now Im waiting the answer!
For Gimbla2: well, I'm novice on JSF2 but I develop for some years with ADF and JBO framework!
You are right to tell me "On the official sites you can find all informations" but I would know some things from some one that used both frameworks!
Thanks again to all.
Edited by: Filippo Tenaglia on 20-giu-2011 14.16 -
While doing the Restore the "connect to Itunes Image is still on my phone and has not shut off or changed since starting the REstore. Now Itunes status bar says "Processing File" but has not changed or done anything for 15+ minutes. What do I need to do? Let it go or is it not working???? FYI, I tried to update to the 6.0.1 (I believe thats this update)
This was the third Restore I've attempted today.... 'm not sure what all I did including unplugging and plugging it back in, and messing with tryign to select my phone vs. my husbands but it starting moving again. It's now attempting to "back up" from ICloud... we'll see. Thanks
-
Hi - I cannot upload my emails through the mail icon. The first time I tried it only loaded very old emails, I then tried the whole process again and it has not imported a single email. I use hotmail, and have had no problems with my iPhone or iPad. So the only way I can check my emails on my mac is to go through the internet. Can anyone help?
Hello, do you mean Download?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again. -
My iPhone will not restore the process starts and then a message pops up saying 'we are unable to continue with your activation at the time' I have tried a few times now and the same. What can I do ? As I can't use iPhone at all now!!
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
Maybe you are looking for
-
Panorama not working correctly
I have created about 20 panoramas and six of them did not display correctly. I am shooting in camera RAW and downloading dng files t o my computer. the panoramas created are between three and seven images. Here is the problem: The process seems to wo
-
QuickTime Not Playing Purchased Movies
I've noticed that movies I purchased in iTunes, aren't playing in QuickTime. Is there a way to fix this?
-
Prob. with Templete in Smartforms
I am new to smartforms. I have a scenario where I have a template of 4X3 matrix I have to put some values and text within as Tot. Discount | value | value Tot. VAT | value | value Tot. Excise | value | value Grand Tot | value | valu
-
Help! PHP Includes driving me crazy!
I thought I was beginning to get the hang of this, but things are beginning to behave in a strange manner. I made a navBar which came out looking more or less the way I wanted to which you can see here.. But in subsequent pages that I'm trying to cop
-
How to use the bootp_enabled key with dscl command create
During Netboot service configuration I wanted to do it right and followed the suggestions in "System Imaging and Software Update Administration" (page 22): +"To prevent the NetBoot BootP server from responding to+ +requests for IP addresses, use the