NI-DAQmx support for labview could not be found

Hi, I am pretty new to LabView. I was using VC++ to programming for my USB-6215. Just curious how LabView works, so I try to follow the "Introduction to Taking an NI-DAQmx measurement in LabView" and configure my USB-6215 in LabView. However, when I try to gererate codes for the DAQmx task name control, an error message pop up as "Error:NI-DAQmx support for labview could not be found. Please reinstall NI-DAQmx". I did reinstall NI-DAQmx, but it doesn't help. This error occurs anyway. Any idea how it happens and the solution is highly appreciated. Thank you.
Jingyu

See attached
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA
Attachments:
MX picture.PNG ‏35 KB

Similar Messages

Installer LV7.1 - LabVIEW load error code 21: An external subroutine required for execution could not be found.

Bonjour,
Je cherche à créer un installer portatif utilisant les drivers NI-DAQmx 8.7.1 et NI-CAN 2.6.0.
Je dispose d'un code LV 7.1 et j'ai installé l'application builder 7.1.
Mais une fois l'application installé sur un PC vierge de Labview, j'obtiens le message suivant:
load error code 21: An external subroutine required for execution could not be found.
Ce message est répété plusieurs fois (pour différents VIs) puis le programme ne se lance pas.
J'ai bien veillé à installer les drivers NI-CAN et NI-DAQmx correspondant au préalable sur la machine cible.
En chercant sur le forum, plusieurs pistes m'ont été proposé:
La version NI-DAQ
L'intégration du Run time Engine
Un problème de DLL
J'ai vérifié ces 3 points mais cela n'a pas règlé mon problème.
Résolu !
Accéder à la solution.

Bonjour,
Merci de ta réponse.
En fait, j'ai bien inclu le runtime engine de Labview qui était effectivement la source de l'erreur.
L'installation de NI-DAQmx v 8.7.1 provoque la mise à jour de la version du runtime engine (passage de 7.1 à 7.1.1).
J'ai donc désinstallé Le runtime engine 7.1.1 (ce qui a provoqué la désinstallation de labview et NI-DAQ).
Puis je suis passé par une version plus ancienne de NI-DAQ (7.2) que j'ai adapté (inclusions de DLL et de VIs).
Les messages d'erreurs ont alors tout simplement disparus!

Artwork for _________ could not be found

I bought a CD and downloaded it to my itunes but it didnt have the artwork, i got some artwork from the internet but its very pixally when its on my apple tv. and wen i go to advanced and click get album artwork it says Artwok for "Hairspray" could not be found. Is it possible to get an itunes quality artwork or do i hav to settle w the internet pic?

Here is the best site I have found:
http://www.albumartexchange.com/

DAQmx support for Labview 8.0

I am having a problem with the current DAQmx Drivers,
The system used to run perfectly when using labview 8.0, however, after the installation of labview 2009
The DAQ library in the labview 8.0 folder is missing.
I tried to install the older version of the DAQmx (Legacy) but i still can't get the library back in labview 8.0 folder.
Would it possible to get those files ?
Thanks,
Ahmad Aladdasi
Mechatronics Engineer
Solved!
Go to Solution.

Hello again,
I tried to uninstall everything related to labview on the computer using msiblast, but still having the same problem, even after removing every labview newer than 8.0 files.
When I try to install DAQmx 8.6 it says a newer version is available.
I deleted the registry stuff to.
I had to keep labview 8.0 because it is the version i want to use plus i don't have the CD to install it, so i kept it and it's support files.
Can anyone send me the DAQmx library for labview 8.0?
Makesure it is the Vi files not the installation setup because that one will give me the same problem, " Newer Version is installed" problem.
Don't refer me to any extra links about installing, cuz honestly i have seen them all....
Thanks,

Sales price for material could not be found?

hi all,
i have created a service(material) using material Type DIEN, then i have done standard P.O.(not with item category D)
But when i do GR I am getting Sales price for the material could not be found?
How to solve this?

Hi,
Kindly maintain sales view for the material in material master.
regards
suresh

DAQmx support for LabVIEW 2010

FYI to those downloading LabVIEW 2010 from NI web site:
After Installing LabVIEW 2010 (download from web site), I noticed that there is no support for DAQmx (i.e.. VI libraries) in NI_DeviceDrivers-February2010 DVD (my latest copy). Your have to download and install DAQmx 9.2 drivers (the first to include LabVIEW 2010 support).
Additionally, If you were using Traditional NI-DAQ (Legacy) 7.4.4 VIs in a prior version of LabVIEW, you must do one of the following:
      1. Uninstall current Traditional NI-DAQ (Legacy) 7.4.4 installation and re-install after completing LabVIEW 2010 installation.
          Reason: Traditional NI-DAQ (Legacy) installs support only for the latest version of LabVIEW found on the system.
Or
      2. Copy the the "<previous LabVIEW>\vi.lib\Daq" directory and all it contents to a new "<LabVIEW 2010\vi.lib\Daq directory. This way you can use Traditional NI-DAQ in both versions of LabVIEW.

I didn't have DVDs, I had to download.
Yes it was a mess. The device driver download took forever (NI can't help that). The installation took beyond forever (what else can be done?).
I was disappointed that I had to do all of this backing up of legacy folders and restoring them after installing the device drivers. Why does NI always have device drivers and toolkits install to the latest version of Labview only? Why couldn't they leave the legacy stuff alone?? I still use LV2009 and wanted to try LV2010. This involved a whole lot of trouble and time.
NI needs to provide a much easier way to upgrade, while still allowing previous versions to work without modification. Most people who upgrade will not completely abandon the older versions.
- tbob
Inventor of the WORM Global

Definition could not be found - but library is there!

Hi,
I installed a library (as3isolib) in Flash Builder 4 and started writing code (following a Lee Brimelow's tutorial on www.gotoandlearn.com).
So, if I instantiate a new variable, the hint box is there with all the classes and methods and all. After inserting the line, the corresponding import line is also inserted automaticaly.
I believe this means the library has been added correctly to the project.
HOWEVER... the editor reports error messages all along the code biside all references to the library classes.
The very first error message on the code is "1172: Definition as3isolib.display.IsoView (for instance) could not be found".
I don't get it... Any ideas?
Thank you!
Marcos

Did you did an import? The library may be available for auto-complete, but I believe you still need to import whatever you will use.
If this post answers your question or helps, please mark it as such. Thanks!
http://www.stardustsystems.com
Adobe Flex Development and Support Services

After Effects warning - The file Plug-ins/cineware ae default.c4d could not be found

Hello,
Running AE CC and whenever I start a New MAXON Cinema 4D File I get this error message.
After Effects warning: The file '/Applications/Adobe After Effecgts CC/Plug-ins/MAXON CINEWARE AE/(CINEWARE Support)/default.c4d' could not be found.
I looked and the files are still in the plugin folder and all looks well. Can't seem to find any specific info on the forums or when I checked the FAQ.
Thanks,
Dan

When did you install the 12.2 update? The reason that I ask is that we had a brief problem when we first uploaded the update, in which not all of the Cinema 4D components were included. That problem only lasted for a few hours, but it meant that people who updated immediately after we released the update had problems like the one that you're describing.
Try uninstalling and then re-installing After Effects. This will ensure that you are downloading the current and known-good update files.

LabVIEW could not generate code for the shared variable.You must open the VI in the project that contains the library where the shared variable resides

HI
When I put a network shared variable with fifo RT activated on my diagram, the arrow is broken.and I' ve got this message:
""LabVIEW could not generate code for the shared variable.You must open the VI in the project that contains the library where the shared variable resides""
If I uncheck FIFO RT option for this variable the arrow isn't broken anymore.
I 've no idea how to correct this weird error?
Autodeploy is on, and I've check copy / delete in diagram in tool/options\diagram
regards,
james

Hello,
I don't reproduce this error.
Could you send your VI?
Regards
VéroniqueD
NI France

TS3212 I'm runing IE9 & I'm unable to download iTunes. I receive this error each time: There is a problem with this windows installer package. A program required for the program to complete could not be found. Contact your support personnel or package

I'm running IE 9 & windows 7. I'm unable to download iTunes. I receive this error each time: There is a problem with this windows installer package. A program required for the program to complete could not be found. Contact your support personnel or package vendor.

There is a problem with this windows installer package. A program required for the program to complete could not be found. Contact your support personnel or package vendor.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Hello i buy itunes card and i have 12 but i can not buy the jewels of the game hay day when i try show me the message contact itunes for support your purchase could not be completed

hello i buy itunes card and i have 12 but i can not buy the jewels of the game hay day when i try show me the message contact itunes for support <<your purchase could not be completed >> what can i do

You will need to do what it says, contact iTunes Support. These are user-to-user support forums, if you thought you were contacting Apple by posting here. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to contact the iTunes Store.
Regards.

LabVIEW could not write the file back to disk (-2570)

Hello,
i use this MDF data storage plugin to write MDF files: mdf plugin
I created a project with some VI's like MDFOpen.vi, MDFClose.vi, MDFWriteDouble.vi, etc ...
I also created a Test VI which generates data at a specific rate (want to see performance) and write it to a MDF file. It works ....
Now I want to use this in C#. I compiled a LabView .Net DLL out of my MDF VI's and referenced it in Visual Studio. I can open a MDF File from C# and close it. But as soon as I write a double (actual content) into the MDF File I get an exception when I call MDFClose.vi from DLL. Obviously "Close Data Storage <APPEND>" from inside my MDFClose.vi returns error -2570: LabVIEW could not write the file back to disk. I have no idea why.
regards
Thomas

So I guess it's time to update this post for anyone who also have problems with MDF or Storage/DataPlugin VIs in general.
My task was to create a MDF Logger, so I needed to write MDF files. MDF4Lib from Vector mentioned in an above post can only read MDF files. ETAS is also selling an MDF Lib but there are reasons I don't want that. So why not use MDF Storage/DataPlugin from NI? I can tell you.
My MDF Logger is now finished and can create MDF files with groups and channels, just like TDMS, but ... when I write data in a loop and then finish by closing the MDF File/Reference it may happen that:
i get error LabVIEW could not write the file back to disk (-2570)
application crashes
both 1 and 2
If it does not crash or throw an error it succeeds finishing my MDF file correctly but next time I repeat this (without restarting application) I notice writing data takes longer than in first run and my memory is increasing. The more I repeat the longer it takes to write data to MDF and the more memory is increasing until it finally crashes. It also depends on how much data in how many groups/channels are written.
NI Support already got this and confirmed that with desktop execution tracekit you will see that with each call to a Storage/DataPlugin VI references are leaking. Those leaks are assumed to be the root cause of all that trouble. There is not bugfix but apparently one or more CAR's about this. So I guess this is not MDF specific but generally with Storage/DataPlugin.
My current only workaround is to close the app each time after I am done writing one MDF file. My future fix will be to implement MDF on my own.

Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

That's an error reported from DVD Player I believe...
kDVDErrorMissingGraphicsDevice = -70017, // A valid graphics device is not available.
There's some conjecture it has to do with HDCP, or Video Card problems, but the only 2 cures/fixes I found were Software related, one was cured by updating the OS, another by replacing the Video kexts.
I think this error also shows up if trying to use DVD player in Safe Mode, (too much research isn't good! ).
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware>Graphics/Displays and report like this...
NVIDIA GeForce 7800GT:
Chipset Model:          GeForce 7800GT
Type:          Display
Bus:          PCI
Slot:          SLOT-1
VRAM (Total):          256 MB
Vendor:          nVIDIA (0x10de)
Device ID:          0x0092
Revision ID:          0x00a1
ROM Revision:          2152.2
Displays:
VGA Display:
Resolution:          1920 x 1080 @ 60 Hz
Depth:          32-bit Color
Core Image:          Supported
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Display:
Status:          No display connected
Can't think of much to try at the moment, but perhaps reapplying the big 10.4.11 combo, Repair Permissions, & reboot would help, not sure.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html

I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??

I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??
I haven't kept records of the songs I have paid for, and a number of songs have recently been displaying this message, making me search my computer for them. Most I have been able to find, but this one immediately "disappeared" the moment I attempted to play it after downloading...... how do I either get it back or get my money back???

How did you do this move? Unless you know what you are doing you have to move the whole, complete iTunes folder.
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381

The attributes for user could not be determined --

Hi,
Our is extended classic scenario:srm5.0 & ECC6.0
we are getting the following error in the org plan:
"The attributes for user could not be determined "
The error is occuring , when we log into the web browser.
we also have a error in the org plan, under the user at the check tab,"No attribute found for scenario BBP".
when we run the BBP_ATTR_CHECK & BBP_BP_OM_Integrate, we have no errors...
Thanks in advance,
RK.

Hi All,
Thanks for your support...
I check the T-code:BBP_ATTR_CHECK & BBP_BP_OM_INTEGRATE.
I also checked the attributes for the CP are ok,still i had the error appearing in the WEB.
The solution:
The CP has been deleted from the org plan.
Once again,we generated the users from USERS_GEN and assign CP to the org plan again at the same.Now the Attributes error is gone.... and the issue is resolved.
Thanks and Regards,
RK.

NI-DAQmx support for labview could not be found

Similar Messages

Maybe you are looking for